Vulnerabilidade ao estresse no trabalho e percepção de suporte familiar em porteiros: um estudo correlacional

Este estudo objetivou avaliar e correlacionar os níveis de vulnerabilidade ao estresse no trabalho e percepção de suporte familiar em trabalhadores porteiros. Participaram 100 porteiros de uma empresa prestadora de serviços de médio porte. Utilizou-se o questionário de caracterização, a Escala de Vulnerabilidade ao Estresse no Trabalho (EVENT) e o Inventário de Percepção de Suporte Familiar (IPSF). A idade média dos participantes foi de 37,8 anos; trabalhavam na empresa, em torno de quatro anos e como porteiros, em média, há cinco anos. Os resultados mostraram uma pontuação média na medida de estresse geral da EVENT, sugerindo indicação de poucos estressores nesse grupo de porteiros. O IPSF também apresentou pontuação média, indicando que grande parte dos participantes possui percepção de bom suporte familiar. As análises mostraram correlações negativas fracas, porém estatisticamente significantes, entre a dimensão adaptação familiar do ipsf e as dimensões clima e funcionamento organizacional, pressão no trabalho e total da EVENT.

Composições tecidual e química do lombo de cordeiros alimentados com rações contendo semente de girassol em comedouros privativos

O experimento foi realizado objetivando avaliar a composição tecidual e química do músculo Longissimus dorsi de cordeiros Suffolk alimentados em comedouros privativos com ração contendo 0; 6,60; 13,20 ou 19,80% de semente de girassol. Ao nascer, os cordeiros foram numerados, pesados e distribuídos aleatoriamente nos piquetes compondo quatro repetições por tratamento em um total de 16 cordeiros. As rações continham 2,65; 2,78; 2,89 ou 2,93 Mcal/kg de energia metabolizável e 18,38; 18,75; 19,98 ou 21,18% de proteína bruta e foram fornecidas à vontade aos cordeiros. Os cordeiros foram pesados a cada 14 dias e mantidos com as ovelhas até atingirem o peso vivo de abate pré-estabelecido (28 kg). As carcaças foram mantidas durante 24 horas na câmara frigorífica a 5ºC e, posteriormente, foram seccionadas em sete regiões anatômicas para coleta dos lombos esquerdo e direito e obtenção, no músculo Longissimus dorsi, do peso dos componentes do lombo (músculo, osso e gordura) e da composição química e do perfil de ácidos graxos do músculo, do osso e da gordura. A semente de girassol influenciou o peso total do lombo, os pesos de músculo e tecido conjuntivo e o rendimento do tecido conjuntivo. O aumento no percentual de semente de girassol na ração diminuiu a quantidade dos ácidos láurico e palmítico (saturados) e aumentou a dos ácidos oléico e linoléico (insaturados). A qualidade nutricional da carne dos cordeiros melhora com aumento da utilização de semente de girassol na dieta.

Desempenho e características de carcaça de cordeiros alimentados em comedouros privativos recebendo rações contendo semente de girassol

Avaliaram-se o desempenho e as características quali e quantitativas da carcaça de cordeiros alimentados com ração contendo semente de girassol. Utilizaram-se 16 cordeiros distribuídos aleatoriamente em um delineamento inteiramente casualizado com quatro tratamentos (0,00; 6,60; 13,20 ou 19,80% de semente de girassol na matéria natural), cada um com quatro repetições, totalizando 16 cordeiros. As dietas continham 2,65; 2,78; 2,89 e 2,93 Mcal/kg de energia metabolizável e 18,38; 18,75; 19,98 e 21,18% de proteína bruta, respectivamente, e foi fornecida ad libitum. Os cordeiros foram pesados a cada 14 dias e mantidos com as ovelhas até atingirem 28 kg, quando foram abatidos, após jejum de sólidos por 18 horas, para obtenção do peso vivo ao abate e registro do peso da carcaça quente e do conteúdo gastrintestinal, utilizados no cálculo do peso de corpo vazio. As carcaças foram mantidas por 24 horas em câmara frigorífica em temperatura de 5ºC para obtenção do peso de carcaça fria. Os níveis de semente de girassol na dieta não afetaram as características de desempenho dos cordeiros. No entanto, os pesos de carcaça quente e de carcaça fria; os pesos de pescoço, baixo, paleta, costela descoberta, costela, lombo; e os rendimentos comerciais de carcaça e costela descoberta, costela, lombo, paleta, pescoço e baixo sofreram efeito da adição da semente de girassol. O fornecimento de semente de girassol na dieta não influencia as características qualitativas e morfométricas da carcaça de cordeiros.

Multidisciplinary approach for the aesthetic treatment of maxillary lateral incisors agenesis: thinking about implants?

Missing maxillary lateral incisors create an esthetic problem with specific orthodontic and prosthetic considerations. Implants are commonly used to replace congenitally missing lateral incisors in adolescent orthodontic patients. However, an interdisciplinary approach should be observed during the diagnosis, prognosis, and treatment plan to provide a result with good predictability and meet the esthetic and functional expectations of the patient. The present study describes a case of a young patient with tooth agenesis of maxillary lateral incisors, which was conducted with an integrated planning. After 5-year follow-up of 2 fixed implant-supported prostheses, clinical and radiographic examination showed the treatment to be successful. (Oral Surg Oral Med Oral Pathol Oral Radiol 2012;114:e22-e28)

The Effect of Splint Material Rigidity in Implant Impression Techniques

Purpose This in vitro study compared the dimensional accuracy of two impression techniques Duralay splinted impression copings (D) and metal splinted impression copings (M) for implant supported pros theses Materials and Methods A master cast with four parallel implant abutment analogs and a passive framework were fabricated Vinyl polysiloxane impression material was used for all impressions with a metal stock tray Two groups (D and M) were tested (n = 5) The measurement method employed was just one titanium screw tightened to the framework Each group s measurements were analyzed using software that received the images of a video camera coupled to a stereomicroscope at X100 magnification The results were analyzed statistically (t test) Results The mean values of abutment/framework interface gaps were master cast = 32 mu m (SD 2), group D = 165 mu m (SD 60), and group M = 69 mu m (SD 36) There was a statistically significant difference between the D and M groups (P <= 001) Conclusion Under the limitations of this study, it could be suggested that a more accurate working cast can be fabricated using metal splinted impression copings INT J ORAL MAXILLOFAC IMPLANTS 2010 25 1153-1158

Accuracy of Impression Techniques for an Implant-Supported Prosthesis

Purpose: This in vitro study compared the dimensional accuracy of a stone index and of two impression techniques (squared impression copings and modified squared impression copings) for implant-supported prostheses. Materials and Methods: A master cast with four parallel implant-abutment analogs and a passive framework were fabricated. Vinyl polysiloxane impression material was used for all impressions with a metal stock tray. Three groups of impressions were tested (n = 5): index (1), squared (S), and modified squared (MS). The measurement method employed was just one titanium screw tightened to the framework. The measurements (60 gap values) were analyzed using software that received the images from a video camera coupled to a stereomicroscope at x 100 magnification. The results were evaluated statistically (analysis of variance, Holm-Sidak method, alpha = .05). Results: The mean abutment/framework interface gaps were: master cast = 31.63 mu m; group I = 45.25 mu m; group S = 96.14 mu m; group MS = 51.20 mu m. No significant difference was detected among the index and modified squared techniques (P = .05). Conclusion: Under the limitations of this study, the techniques modified squared and index generated more accurate casts than the squared technique. INT J ORAL MAXILLOFAC IMPLANTS 2010;25:715-721

Comparison of impression techniques and materials for implant-supported prosthesis

Purpose: To investigate, in vitro, the dimensional accuracy of two impression techniques (squared impression copings and squared impression copings sandblasted and coated with impression adhesive) made of vinyl polysiloxane and polyether impression materials. Materials and Methods: A master cast (control group) with four parallel implant abutment analogs, a passive framework, and a custom aluminum tray was fabricated. Four groups (n = 5 each group) were tested: squared Impregum (SI), squared Express (SE), sandblasted adhesive squared Impregum (ASI), and sandblasted adhesive squared Express (ASE). The measurement method employed was just one titanium screw tightened to the framework. A stereomicroscope was used to evaluate the fit of the framework by measuring the size of the gap between the abutment and the framework. The results were analyzed statistically. Results: The mean values for the abutment/framework interface gaps were: master cast, 31.63 mu m (SD 2.16); SI, 38.03 mu m (SD 9.29); ASI, 46.80 mu m (SD 8.47); SE, 151.21 mu m (SD 22.79); and ASE, 136.59 mu m (SD 29.80). No significant difference was detected between the SI or ASI techniques and the master cast. No significant difference was detected between the SE and ASE techniques. Conclusion: Within the limitations of this study, it can be concluded that Impregum Soft medium consistency was the best impression material and the impression technique did not influence the accuracy of the stone casts. INT J ORAL MAXILLOFAC IMPLANTS 2010;25:771-776

Comparison of the Accuracy of Plastic and Metal Stock Trays for Implant Impressions

Purpose: This in vitro study evaluated the dimensional accuracy of two impression techniques (tapered and splinted) with two stock trays (plastic and metal) for implant-supported prostheses. Materials and Methods: A master cast with four parallel abutment analogs and a passive framework were fabricated. Polyvinyl siloxane impression material was used for all impressions with two metal stock trays and two plastic stock trays (closed and open trays). Four groups (tapered plastic, splinted plastic, tapered metal, and splinted metal) and a control group (master cast) were tested (n = 5 for each group). After the framework was seated on each of the casts, one abutment screw was tightened, and the marginal gap between the abutment and framework on the other side was measured with a stereomicroscope. The measurements were analyzed with the Kruskal-Wallis one-way analysis of variance on ranks test followed by the Dunn method. Results: The mean values (+/- standard deviations) for the abutment/framework interface gaps were: master cast, 32 +/- 2 mu m; tapered metal, 44 +/- 10 mu m; splinted metal, 69 +/- 28 mu m; tapered plastic, 164 +/- 58 mu m; splinted plastic, 128 +/- 47 mu m. No significant difference was detected between the master cast, tapered metal, and splinted metal groups or between the tapered and splinted plastic groups. Conclusions: In this study, the rigidity of the metal stock tray ensured better results than the plastic stock tray for implant impressions with a high-viscosity impression material (putty). Statistically similar results were obtained using tapered impression copings and splinted squared impression copings. The tapered impression copings technique and splinted squared impression copings technique with a metal stock tray produced precise casts with no statistically significant difference in interface gaps compared to the master cast. INT J ORAL MAXILLOFAC IMPLANTS 2012;27:544-550.

Accuracy of impression and pouring techniques for an implant-supported prosthesis

Purpose: The purpose of this in vitro study was to compare the dimensional accuracy of a stone index and of 3 impression techniques (tapered impression copings, squared impression copings, and squared impression copings splinted with acrylic resin) associated with 3 pouring techniques (conventional, pouring using latex tubes fitted onto analogs, and pouring after joining the analogs with acrylic resin) for implant-supported prostheses. Materials and Methods: A mandibular brass cast with 4 stainless steel implant-abutment analogs, a framework, and 2 aluminum custom trays were fabricated. Polyether impression material was used for all impressions. Ten groups were formed (a control group and 9 test groups formed by combining each pouring technique and impression technique). Five casts were made per group for a total of 50 casts and 200 gap values (1 gap value for each implant-abutment analog). Results: The mean gap value with the index technique was 27.07 mu m. With the conventional pouring technique, the mean gap values were 116.97 mu m for the tapered group, 5784 mu m for the squared group, and 73.17 mu m for the squared splinted group. With pouring using latex tubes, the mean gap values were 65.69 mu m for the tapered group, 38.03 mu m for the squared group, and 82.47 mu m for the squared splinted group. With pouring after joining the analogs with acrylic resin, the mean gap values were 141.12 jum for the tapered group, 74.19 mu m for the squared group, and 104.67 mu m for the squared splinted group. No significant difference was detected among Index, squarellatex techniques, and master cast (P > .05). Conclusions: The most accurate impression technique utilized squared copings. The most accurate pouring technique for making the impression with tapered or squared copings utilized latex tubes. The pouring did not influence the accuracy of the stone casts when using splinted squared impression copings. Either the index technique or the use of squared coping combined with the latex-tube pouring technique are preferred methods for making implant-supported fixed restorations with dimensional accuracy.

Fungos causadores de podridões pós-colheita em uvas apirênicas no pólo agrícola de Juazeiro - BA e Petrolina - PE

In Brazil, postharvest diseases caused by pathogenic microorganisms are a major problem that causes damage to around 80% of the total fruit production. In the lower middle Sao Francisco river valley numerous studies on identification and control of fungal diseases during postharvest of grapes are needed, in order to minimize losses in this step. In this context, bunches of seedless varieties 'Crimson', 'Sonaka'; 'Superior' and 'Thompson' were collected from July to November 2009, in order to identify and quantify the incidence of pathogenic fungi. The grapes were collected on five farms which specialize in the production of table grapes for export, all located in Juazeiro - BA and Petrolina - PE. During this period, 10 samples were taken. In the fruit farm five plants were used for sampling, and removal of two bunches of grapes per plant, totaling 10 bunches per variety. Subsequently, they were sent to the laboratory of Plant Pathology at UNEB/DTCS where they were placed separately in a moist chamber for 48 hours at an average temperature of 23 degrees C. After this period, isolations of berries and stems in Petri plates containing PDA - potato-dextrose-agar were carried out with 10 repetitions, which were placed on benches under laboratory conditions. From the 8th day on, the presence of Aspergillus niger, Alternaria alternata, Cladosporium herbarum, Lasiodiploidia theobromae was observed, which presented the highest incidence, as well as Rhizopus stolonifer, Penicillium expansum.

Characterization of invasive fish species in a river transposition region: evolutionary chromosome studies in the genus Hoplias (Characiformes, Erythrinidae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A new species of Miogryllus Saussure, 1877 from Andean Venezuela with bizarre cephalic morphology (Orthoptera, Gryllidae, Gryllinae, Modicogryllini)

Miogryllus muranyi n. sp. is described from the Andean Acacia-Cactaceae semi-desert bush in the Chama Valley of Venezuela. The species is characterized by the unusual shape of the male head, which makes it readily distinguishable from any other congener known to date.

A new species of Tafalisca Walker, 1869 from the Iguacu National Park, Brazil (Grylloidea, Eneopteridae, Tafaliscinae)

The aim of this work was to describe a new cricket species from the Iguacu National Park, Southeastern Brazil. We characterize the genitalia and external morphology of Tafalisca paranaensis n. sp. and the genitalia of Tafalisca paulista Rehn, 1918 providing a comparison between these species.

Diet and feeding activity of Acestrorhynchus lacustris (Lütken, 1875) (Characiformes, Acestrorhynchidae) in the water reservoir at Ribeirão Claro, SP

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Zoneamento bioclimático da ovinocultura no Estado do Paraná

Utilizaram-se 45 fêmeas ovinas adultas (15 Hampshire Down [HD], 15 Texel [TE] e 15 Ile de France [IF]), para propor um zoneamento bioclimático da ovinocultura no Estado do Paraná. Mediram-se a temperatura retal (Tr), da epiderme (Te), do interior do velo (Tiv) e da superfície do velo (Tsv); a frequência respiratória (Fr); a temperatura do ar (Ta), pressão de vapor (e), velocidade do vento (v) e carga térmica radiante (CTR). O Índice de Conforto Térmico utilizado foi ICT= 0,6678Ta + 0,4969e + 0,5444Tg + 0,1038v. A regressão do ICT sobre Tr mostrou efeito quadrático para as três raças. Para ICT=24,3, 27,3 e 20,6, os valores de Tr foram respectivamente: 39,10ºC para a raça HD, 39,05ºC para TE e 39,09ºC para IF, atingindo 40,40; 40,50; e 40,28ºC, respectivamente, para ICT=58. As três raças aumentaram sua Tr a partir de ICT=26, com a TE apresentando menor Tr até o valor ICT=46; neste ponto, as três raças foram semelhantes, tendo a TE apresentado maiores valores. Para ICT igual a 27,6; 29,7; e 27,0, os valores de Fr foram, respectivamente, 89,63; 77,08; e 78,77 resp./min., para as raças HD, TE e IF. A raça TE apresentou menor Fr (77,08 resp./min.), para ICT=29,7 e para ICT=48, valores semelhantes aos da IF (181,96 resp./min.); a partir deste índice, passou a ser maior que as demais raças, atingindo valores de 288,66 resp./min. no ICT=56, porém inferior à HD (289,01 resp./min.). Neste índice, a raça IF foi a que apresentou a menor Fr (275,72 resp./min.). Uma extensa faixa ao longo do litoral do Estado, entrando cerca de 200 km para o interior até os limites das cidades de Castro, Telêmaco Borba, Laranjeiras do Sul e Pato Branco, permite a criação das três raças, sem exigir grandes esforços de termorregulação.