Biomechanical Study in Polyurethane Mandibles of Different Metal Plates and Internal Fixation Techniques, Employed in Mandibular Angle Fractures

The aim of this study was to perform a physicochemical and morphological characterization and compare the mechanical behavior of an experimental Ti-Mo alloy to the analogous metallic Ti-based fixation system, for mandibular angle fractures. Twenty-eight polyurethane mandibles were uniformly sectioned on the left angle. These were divided into 4 groups: group Eng 1P, one 2.0-mm plate and 4 screws 6 mm long; group Eng 2P, two 2.0-mm plates, the first fixed with 4 screws 6 mm long and the second with 4 screws 12 mm long. The same groups were created for the Ti-15Mo alloy. Each group was subjected to linear vertical loading at the first molar on the plated side in a mechanical testing unit. Means and standard deviations were compared with respect to statistical significance using ANOVA. The chemical composition of the Ti-15Mo alloy was close to the nominal value. The mapping of Mo and Ti showed a homogeneous distribution. SEM of the screw revealed machining debris. For the plates, only the cpTi plate undergoes a surface treatment. The metallographic analysis reveals granular microstructure, from the thermomechanical trials. A statistically significant difference was found (P < 0.05) when the comparison between both internal fixation techniques was performed. The 2P technique showed better mechanical behavior than 1P.

Risk factors for facial melasma in women: a case-control study

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Spontaneous healing responses detected by cone-beam computed tomography of horizontal root fractures: a report of two cases

Horizontal root fractures (HRF) usually affect the anterior teeth as a result of trauma, and generally heal spontaneously, depending on the vitality of the pulp. Diagnosis based on clinical findings, sensitivity tests, and radiographic examination is important to determine the presence of a root fracture and to prevent a root fracture from passing unnoticed. Cone-beam computed tomography (CBCT) has been used successfully for diagnosis and prognosis imaging of root fractures and has proved to be superior to other radiographic methods. This study reports two cases of dental trauma caused by a collision and a sports accident. The patients suffered horizontal root fractures in the maxillary left central incisor and in the mandibular left central incisor. The diagnosis of root fracture was confirmed by cone-beam computed tomography (CBCT) images, which also demonstrated spontaneous healing of the fracture line. The repair occurred by interposition of connective tissue in the former case and by interposition of bone and connective tissue in the latter case. The final diagnoses of both cases were based on CBCT images, indicating the importance of a CBCT examination to reach a firm diagnosis and to follow the healing process of root fracture cases, avoiding unnecessary radical endodontic treatment.

Análise da evolução de pacientes com paralisia facial periférica submetidos a reabilitação

INTRODUÇÃO: A paralisia facial periférica (PFP) consiste no acometimento do sétimo nervo craniano, de forma aguda, podendo ser precedida por dor na região mastoidiana e resultando em paralisia completa ou parcial da mímica facial. É, na sua grande maioria, de causa idiopática ou apresenta diversas etiologias como diabetes mellitus, hipertensão arterial, herpes zoster, viroses, otites médias, infecções (lepra, sífilis, doença de Lyme), sarcoidose, traumatismo e tumores. Apesar da paralisia facial periférica ter sido descrita em 1821, por Sir Charles Bell, ainda hoje existe muita controvérsia a respeito da etiologia e tratamento. A incidência da PFP encontra-se entre 20 a 30 casos por 100 mil habitantes, com prevalência ligeiramente maior entre as mulheres. Baseado nessas premissas, este estudo teve por objetivo avaliar a evolução de pacientes com paralisia facial periférica submetidos a um protocolo de reabilitação. METODOLOGIA: No estudo foram incluídos 30 pacientes com diagnóstico de paralisia facial periférica idiopática, atendidos no Centro de Estudos e Reabilitação em Fisioterapia (CEAFIR), da FCT-UNESP, campus de Presidente Prudente. O presente estudo adotou como procedimento fisioterapêutico os protocolos I, II, III e IV. Antes de realizar qualquer técnica, abaixo mencionada, foi explicado ao paciente cada passo, para evitar surpreendê-lo. Conforme os pacientes apresentassem melhora e evoluções nas reavaliações elétricas, foram feitas recomendações de exercícios para mímica facial, em frente ao espelho. As repetições eram aumentadas gradativamente, posteriormente os mesmos exercícios, mas agora ativos resistidos. RESULTADOS: Os valores das variáveis reobase, cronaxia e acomodação, nos garantem que o protocolo usado permite avaliar a condução nervosa do facial, o grau de evolução da condução nervosa, bem como acompanhar... (Resumo completo, clicar acesso eletrônico abaixo)

Avaliação da prevalência do tipo de crescimento crânio facial nas diferentes más oclusões, de acordo com a classificação de angle

During the orthodontic correction planning in addition to dental-jaw correction, facial aesthetics is the orthodontist's and patient's major concern. To prevent facial aesthetics damage is really important to take into account the type of craniofacial growth: mesofacial (balanced), dolichofacial (vertical) or brachyfacial (horizontal). We evaluated 152 documentation files from the Department of Orthodontics of Dental University of Sao Jose dos Campos- UNESP in order to analyze what kind of growth occurs in most Class I malocclusions, Class II and Class III Angle of treated individuals from 6 to 12 years old. From the randomly collected samples, 15 of them belonged to Class I Angle malocclusions; 123 belonged to Angle Class II and 14 to Class III malocclusion. The results showed that in Class I, 66.67% were classified as dolicocephalic; in Class II, 64.23% were classified as dolicocephalic and in Class III, 50% were brachycephalic. We conclude that the dolichofacial was the type which ocurred the most, both in females and males and both in malocclusion Class I and Class II. The brachyfacial type most occurred in Class III malocclusion and the mesofacial type occurred in smaller numbers in the three malocclusions studied

Expressão gênica e protéica de receptores de estrogênio β e progesterona no melasma facial de mulheres e na pele sã adjacente

Pós-graduação em Patologia - FMB

Tendência de crescimento facial em ortodontia e ortopedia funcional dos maxilares

The knowledge of the facial growth trend is very important in orthodontic treatment. A lateral headfilm is recommended in all young patients undergoing a preorthodontic guidance program to anticipate the best time to begin any mechanical procedures and the possibilities to determine the type of facial growth trend. In type A it will be observed that the middle and lower face are growing forward and downward in unison, with no change in ANB angle. Type B growth trends reveals that growth is downward and forward, with the middle face growing forward more rapidly than the lower and in type C the lower face is growing downward and forward more rapidly than the middle face revealing a decrease in the size of the ANB angle.

Facial type measurements influence on transverse dimensions of normal occlusion arches

Objective – To correlate facial type measurements of Caucasian individuals with transverse dimensions of normal occlusion arches. Methods – Twenty-one pairs of dental models were selected according to the following inclusion criteria: presence of all permanent teeth from 1 st molar to 1 st molar; normal occlusion; no prosthetic crowns; no previous orthodontic treatment and 2 mm or less of crow- dings or spacings. The cephalometric measurements of lateral cephalometric X-ray of the same individuals were taken and tabulat ed. To evaluate the repetition of arch measurements, paired Student’s t-test and Pearson's correlation coefficient were used. The r elationship between the measurements was analysed by using the Pearson’s correlation. Results – The repetition of the measurements showed high correlation and no systematic error. In the comparison between the measurements, a moderate negative correlation was observed b et- ween facial axis angle and the measurements Upper and Lower 6-6, whereas a positive correlation was observed between dentition height and the latter. Conclusion – It was observed a negative correlation between facial axis angle and upper and lower inter-molar distance as well as a positive correlation between dentition height and upper and lower inter-molar distance.

Avaliação cefalométrica das alterações do perfil facial naturais e induzidas pelos aparelhos de Herbst e Bionator no tratamento da má oclusão de classe II, divisão 1ª

The aim of this study was to evaluate the facial profile changes due to natural growth and induced by Herbst appliance and Bionator in the treatment of Class II, division 1 malocclusion. In order to do that, we used a sample of 90 lateral radiographs of 45 individuals in pre-pubertal stage, divided up in two experimental groups and one control. The first group, composed of 15 brazilian individuals, with initial mean age of 9.4 years, was treated with the Herbst appliance for a period of seven months. The second experimental group consisting of 15 brazilian individuals, initial mean age of 9.9 years has gone through bionator therapy for an average period of 21 months. The control group of 15 individuals, who were not treated orthodontically, comes up from the Burlington Growth Centre, University of Toronto, Canada. The intragroup comparison was performed using the Student t test and intergroup comparisons by ANOVA complemented by the Bonferroni test. The results have shown that only the group treated with the Herbst appliance presented significant changes in facial profile with improvement of its convexity and lower lip protrusion.

Efecto del blanqueamiento dental con peroxido de hidrógeno al 35% en la resistencia de unión de dientes restaurados con resina compuesta

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Tratamiento de la deformidad facial causada por la hiperplasia condilar: relato de caso

The condylar hyperplasia is an acquired development anomaly, rare, characterized by an excessive and progressive growing, affecting neck, condilar head, body and the mandible bough, provoking an important facial asymmetry. In the article we present a case of male patient, 22-years-old, reclaiming of painful sintomatology in the region of temporomandibular joint and severe facial asymmetry. It was instituted an orthodontic-surgical treatment by means of orthognathic combined surgery and high condilectomy. After six years of post-surgical controlling, the patient is now in a good shape, without recurrence of facial asymmetry and condylar hyperplasia.

A six-year retrospective study of maxillofacial fractures from radiographic findings in Brazil

Objective: this study aimed to present the causes and prevalence of maxillofacial fractures that occurred in the region of Araraquara-SP – Brazil, during a 6-year period. Methods: information regarding age, gender, etiology, and maxillofacial fracture site, as well as type of radiographic examination were evaluated. Data were gathered from the radiographic examination and radiographic report of the Division of Dentomaxillofacial Radiology, and from charts of the Division of Oral and Maxillofacial Surgery of patients attending for maxillofacial fractures from 2004 to 2009. A descriptive statistical analysis was developed using Epi-Info 3.5.1. Results: from a total of 11,728 patients assisted, 407 patients presented maxillofacial fractures. The prevalent age ranged from 21 to 30 years old. From the total patients, 322 were men and 85 were women (ratio of men to women was 3.8:1). Panoramic radiography (n = 306) was most frequently used to observe maxillofacial fractures. Mandibular fractures were frequent in the body of the mandible (n = 127), followed by symphysis (n = 102), and the prevalent cause was traffic accidents (n = 161). Conclusion: more than half of affected individuals were younger than 40 years of age. The body of the mandible was the most common fracture location visualized by panoramic radiography for traffic accidents and fights.

Manejo das fraturas nasais com manutenção das vias aéreas superiores

Nasal fractures are extremely frequent. The nasal bones are the third most frequently fractured bones in the human skeleton. This is due to their prominent position on the face and to the diminished bone thickness. As a result, weak forces can cause nasal fractures, while stronger forces can comminute the nasal bones. In general, assaults, falls and sports injuries are the etiologies most commonly involved in nasal trauma. The diagnosis of such fractures is basically clinical and their treatment is usually by closed reduction with good results reported in all the relevant literature. Thus, the aim of this paper is to report a modification of the closed reduction technique for the treatment of these fractures.

Intraoral approach for treatment of displaced condylar fractures: case report

Dislocated subcondylar fractures often require open reduction and internal fixation. This treatment modality results in better anatomy, early function, and facilitated physical therapy. Ideal stable fixation is obtained by use of two miniplates to control the tension zone in the sigmoid notch area and stabilize the posterior border region or, if there is not enough space, one stronger plate. That is most frequently achieved through extraoral approaches. Recently new instruments have facilitated the use of an intraoral approach, which is used usually with the aid of an endoscope. However, it is possible to perform the procedure without the endoscope if proper instruments and clinical mirrors for checking the posterior border reduction and fixation are used. A case of reduction and fixation of a medially dislocated condylar fracture is presented and discussed.

Treatment of Atrophic Mandibular Fractures with the Pencilboneplate: Report of 2 Cases

The incidence of fractures of the atrophic edentulous mandible is still low, even with the increasing life expectancy. The reduced blood supply of the sclerotic bone, the diminished contact area between bone fragments and the patient’s systemic condition makes the treatment of those fractures a challenge for any professional. Treatment of atrophic mandibular fractures by means of miniplate osteosynthesis has not been the preferred method of fixa- tion by many authors. Yet, many surgeons have applied this type of fixation for the atrophied jaw sections. This paper reports 2 cases of fractured atrophic mandibles treated with the pencilboneplate, a monocortical 2.0 mm titanium, 8 or 10-hole hardware with reinforcement on its middle portion, highlighting important considerations of its use. The pencilboneplate appears to be a valuable option for the treatment of atrophic mandibular fractures, espe- cially by an intra-oral approach, and warrants further bio- mechanical and clinical studies.