75 resultados para CMMS vs. SCADA
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Background: In this study we evaluated the rehabilitation profile of Brazilian soccer players which underwent lower limb muscle lesions.Methods: This is a descriptive investigation. We evaluated 139 professional soccer players (1724 years old). We evaluated the following variables: muscle lesion diagnosis, symptoms, non steroidal anti-inflammatory used, physiotherapy treatment, which physiotherapy recourses was used if treated and train adaptation.Results: In great part of the athletes muscle lesion remained between 2 weeks and 1 month. Around 54% were diagnosed by a physician; the other part was diagnosed by a physical therapist. Non steroidal anti-inflammatory were prescribed by physicians in 42% of the cases; in 7% the physical therapist prescribed the medication while in 49% of the cases the masseur prescribed the drug. More than 1/4 of the athletes received physiotherapy treatement between 48 hours and 5 days. Isometric exercise therapy was applied in 15% of the cases. 63% were not accompanied by the physiotherapist on their return to the field. 48% received massages immediately after injury.Conclusion: We presented discrepancy between the recommended theory described by several researches and the practice. We indicate the necessity of recycling in a general context the rehabilitation of muscle injuries.
Resumo:
Comparative HPLC-UV and LC-MS/MS studies of impurity profiles of a reference sample (Xenical (R), F. Hoffmann La Roche Ltd., Switzerland) vs. generic (Lipiblock (R), EMS Sigma Pharma, a generic drug) were carried out with ethanol extracts of commercial samples. The generic formulation contained higher levels of common impurities as well as a considerable number of impurities not found in the reference product. The detected impurity profile of Lipiblock (R) revealed that it most likely is based on fermentation. Since the effect of the impurities is unknown, at this point fully synthetic Xenical (R) appears to offer a better safety margin than Lipiblock (R) which, however, compares quite well to other generic formulations.
Resumo:
Aims: The effects of glargine insulin therapy in pregnancies are not well established. We compared maternal and neonatal outcomes of women with pregestational and gestational diabetes treated with glargine or NPH insulin.Methods: A prospective cohort study was conducted analyzing outcomes from 56 women with pregestational and 82 with gestational diabetes treated with either insulin regimen.Results: Comparisons were performed among 138 women: 56 with pregestational and 82 with gestational diabetes. In relation to maternal complications, worsening of retinopathy and nephropathy, preeclampsia, micro and macroalbuminuria, and all kinds of hypoglycemia were found higher in women with pregestational diabetes NPH-treated vs. glargine-treated. In women with gestational diabetes NPH-treated, it was observed increased incidence of prepregnancy and new-onset pregnancy hypertension, micro and macroalbuminuria, as well as mild and frequent hypoglycemia, compared to glargine-treated. Among the neonatal outcomes, 1-min Apgar score <7, necessity of intensive care unit and fetal death in pregestational, while jaundice and congenital malformations in gestational diabetes, respectively, were more frequently observed in infants born to NPH-treated, compared to glargine-treated.Conclusions: Glargine use during pregnancy from preconception through delivery, showed to be safe since it is associated with decreased maternal and neonatal adverse outcomes compared with NPH insulin-treated patients. (C) 2010 Elsevier B.V. All rights reserved.
Resumo:
There is no consensus in the literature on the best renal replacement therapy (RRT) in acute kidney injury (AKI), with both hemodialysis (HD) and peritoneal dialysis (PD) being used as AKI therapy. However, there are concerns about the inadequacy of PD as well as about the intermittency of HD complicated by hemodynamic instability. Recently, continuous replacement renal therapy (CRRT) have become the most commonly used dialysis method for AKI around the world. A prospective randomized controlled trial was performed to compare the effect of high volume peritoneal dialysis (HVPD) with daily hemodialysis (DHD) on AKI patient survival. A total of 120 patients with acute tubular necrosis (ATN) were assigned to HVPD or DHD in a tertiary-care university hospital. The primary end points were hospital survival rate and renal function recovery, with metabolic control as the secondary end point. Sixty patients were treated with HVPD and 60 with DHD. The HVPD and DHD groups were similar for age ( 64.2 +/- 19.8 and 62.5 +/- 21.2 years), gender ( male: 72 and 66%), sepsis ( 42 and 47%), hemodynamic instability ( 61 and 63%), severity of AKI ( Acute Tubular Necrosis-Index Specific Score (ATN-ISS): 0.68 +/- 0.2 and 0.66 +/- 0.2), Acute Physiology, Age, and Chronic Health Evaluation Score (APACHE II) (26.9 +/- 8.9 and 24.1 +/- 8.2), pre-dialysis BUN (116.4 +/- 33.6 and 112.6 +/- 36.8mg per 100 ml), and creatinine ( 5.8 +/- 1.9 and 5.9 +/- 1.4 mg per 100 ml). Weekly delivered Kt/V was 3.6 +/- 0.6 in HVPD and 4.7 +/- 0.6 in DHD ( P<0.01). Metabolic control, mortality rate ( 58 and 53%), and renal function recovery ( 28 and 26%) were similar in both groups, whereas HVPD was associated with a significantly shorter time to the recovery of renal function. In conclusion, HVPD and DHD can be considered as alternative forms of RRT in AKI.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Endodontic treatment is an important step of tooth replantation protocols, but the ideal moment for definitive obturation of replanted teeth has not yet been established. In this study, a histomorphometric analysis was undertaken to evaluate the repair process on immediate replantation of monkeys teeth after calcium hydroxide (CH) therapy for 1 and 6 months followed by root canal filling with a CH-based sealer (Sealapex (R)). The maxillary and mandibular lateral incisors of five female Cebus apella monkeys were extracted, kept in sterile saline for 15 min, replanted and splinted with stainless steel orthodontic wire and composite resin for 10 days. In Group I (control), definitive root canal filling was performed before tooth extraction. In Groups II and III, CH therapy started after removal of splint, and definitive root canal filling was performed 1 and 6 months later, respectively. The animals were euthanized 9 months after replantation, and specimens were processed for histomorphometric analysis. In all groups, epithelial attachment occurred at the cementoenamel junction or very close to this region; the areas of resorption on root surface had small extension and depth and were repaired by newly formed cementum; and the periodontal ligament was organized. Statistical analysis of the scores obtained for the histomorphometric parameters did not show any statistically significant difference (P = 0.1221) among the groups. The results suggests that when endodontic treatment is initiated 10 days after immediate replantation and an antibiotic regimen is associated, definitive root canal filling can be performed after a short-term CH therapy.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
OBJETIVO: comparar medidas de tamanhos dentários, suas reprodutibilidades e a aplicação da equação de regressão de Tanaka e Johnston na predição do tamanho dos caninos e pré-molares em modelos de gesso e digital. MÉTODOS: trinta modelos de gesso foram escaneados para obtenção dos modelos digitais. As medidas do comprimento mesiodistal dos dentes foram obtidas com paquímetro digital nos modelos de gesso e nos modelos digitais utilizando o software O3d (Widialabs). A somatória do tamanho dos incisivos inferiores foi utilizada para obter os valores de predição do tamanho dos pré-molares e caninos utilizando equação de regressão, e esses valores foram comparados ao tamanho real dos dentes. Os dados foram analisados estatisticamente, aplicando-se aos resultados o teste de correlação de Pearson, a fórmula de Dahlberg, o teste t pareado e a análise de variância (p < 0,05). RESULTADOS: excelente concordância intraexaminador foi observada nas medidas realizadas em ambos os modelos. O erro aleatório não esteve presente nas medidas obtidas com paquímetro, e o erro sistemático foi mais frequente no modelo digital. A previsão de espaço obtida pela aplicação da equação de regressão foi maior que a somatória dos pré-molares e caninos presentes nos modelos de gesso e nos modelos digitais. CONCLUSÃO: apesar da boa reprodutibilidade das medidas realizadas em ambos os modelos, a maioria das medidas dos modelos digitais foram superiores às do modelos de gesso. O espaço previsto foi superestimado em ambos os modelos e significativamente maior nos modelos digitais.
Resumo:
Purpose: Numerous "in vitro" investigations have been conducted to evaluate the role of screw size and pattern in determining optimal resistance to deformation, often these have been controversial. The aim of this study was to evaluate the effect of screw size and insertion technique on the stability of sagittal split osteotomies.Materials and methods: This study used twenty polyurethane replicas of human hemimandibles with a prefabricated sagittal split ramus osteotomy (SSRO). The hemimandibles were stabilized with 1.5 mm and 2.0 mm titanium screws inserted in an inverted L configuration. All specimens were tested to determine the strength and stability of the fixation.Results: In all cases there was failure of the synthetic bone before there was any evidence of screw failure. There were no significant differences in the load necessary to make the construct fail between the 1.5 or 2.0 mm screw sizes.Conclusion: There was no statistically significant difference between the strengths achieved with screws of 1.5 and 2.0 mm diameters for fixation of SSRO performed in synthetic mandibles. There was no fracture of the 1.5 mm or 2.0 mm diameter screws in any of the tests. 1.5 mm diameter screws in an inverted L pattern have as much stability and mechanical resistance as a 2.0 mm screw, may be safely used for this procedure. (C) 2010 European Association for Cranio-Maxillo-Facial Surgery.
Resumo:
This work investigated whether the preference for NaCl solution is shifted to more palatable solutions in the adult male sodium-depleted rat (n=6-10 per group). Animals had daily access to three bottles, one containing water, another 1.8% NaCl (300 mM), and a third containing 0.9% NaCl (150 mM), Gatorade (orange-OG or grape flavored-GG), orange juice (sweetened or unsweetened, from concentrate), or 10% sucrose (no sodium). Sodium content in Gatorade and orange juice ranged from 7 to 14 mEq/l. Daily intakes were recorded for at least 5 days prior to sodium depletion. Then, the animals were depleted of sodium (diuretic plus sodium-deficient diet and water for 24 h). Then, the other two bottles were returned to the animals and the intakes were recorded for 120 min (sodium preference test, SPT). Daily intake from the third bottle (except for unsweetened orange juice) at least doubled the daily 1.8% NaCl intake. The average 1.8% NaCl intake (13 +/- 2 ml) in the SPT was higher than the intake of 10% sucrose (6 +/- 1 ml) or of any other solution (less than 6 ml). The intakes of 1.8% NaCl and 0.9% NaCl (10 +/- 3 ml) were similar during the SPT. The animals also preferred 0.9% NaCl (27 +/- 1 ml) to OG (3 +/- 1 ml) in the absence of 1.8% NaCl in the SPT. Therefore, the preference for sodium in sodium-depleted rats also applies when palatable and nutritive solutions are simultaneously available. (C) 2002 Elsevier B.V. All rights reserved.
Resumo:
Purpose: The objective of this study was to evaluate the effect of thermocycling (TC), self-adhesive resin cements and surface conditioning on the microtensile bond strength (mu TBS) between feldspathic ceramic blocks and resin cements.Materials and Methods: Fifty-six feldspathic ceramic blocks (10 x 7 x 5 mm) (Vita Mark II) were divided into groups according to the factors "resin cement" (3 cements) and "surface conditioning" (no conditioning or conditioning [10% hydrofluoric acid etching for 5 min + silanization]) (n = 8): group 1: conditioning+Variolink II (control group); group 2: no conditioning+Biscem; group 3: no conditioning+RelyX U100; group 4: no conditioning+Maxcem Elite; group 5: conditioning+Biscem; group 6: conditioning+RelyX U100; group 7: conditioning+Maxcem Elite. The ceramic-cement blocks were sectioned to produce non-trimmed bar specimens (adhered cross-sectional area: 1 +/- 0.1 mm(2)), which were divided into two storage conditions: dry, mu TBS immediately after cutting; TC (12,000x, 5 degrees C/55 degrees C). Statistical significance was deterimined using two-way ANOVA (7 strategies and 2 storage conditions) and the post-hoc Tukey test (p<0.05).Results: Resin cement and thermocycling affected the mu TBS significantly (p = 0.001). In the dry condition, group 5 (18 +/- 6.5 MPa) presented the lowest values of mu TBS when compared to the other groups. TC decreased the mean mu TBS values significantly (p<0.05) for all resin cements tested (9.7 +/- 2.3 to 22.1 +/- 6.3 MPa), except for the resin cement RelyX U100 (22.1 +/- 6.3 MPa). In groups 3 and 4, it was not possible to measure mu TBS, since these groups had 100% pre-test failures during sectioning. Moreover, the same occurred in group 2 after TC, where 100% failure was observed during thermocycling (spontaneous failures).Conclusion: Hydrofluoric acid etching and silanization of the feldspathic ceramic surface are essential for bonding self-adhesive resin cement to a feldspathic ceramic, regardless of the resin cement used. Non-etched ceramic is not recommended.