O Modelo de Ising inomogêneo: uma interrupção contínua entre as redes quadrada e triangular.

The ferromagnetic and antiferromagnetic Ising model on a two dimensional inhomogeneous lattice characterized by two exchange constants (J1 and J2) is investigated. The lattice allows, in a continuous manner, the interpolation between the uniforme square (J2 = 0) and triangular (J2 = J1) lattices. By performing Monte Carlo simulation using the sequential Metropolis algorithm, we calculate the magnetization and the magnetic susceptibility on lattices of differents sizes. Applying the finite size scaling method through a data colappse, we obtained the critical temperatures as well as the critical exponents of the model for several values of the parameter α = J2 J1 in the [0, 1] range. The ferromagnetic case shows a linear increasing behavior of the critical temperature Tc for increasing values of α. Inwhich concerns the antiferromagnetic system, we observe a linear (decreasing) behavior of Tc, only for small values of α; in the range [0.6, 1], where frustrations effects are more pronunciated, the critical temperature Tc decays more quickly, possibly in a non-linear way, to the limiting value Tc = 0, cor-responding to the homogeneous fully frustrated antiferromagnetic triangular case.

Programa de aquisição de alimentos (2003-2010): avaliação da implementação pela CONAB no Rio Grande do Norte

This thesis aimed to evaluate the implementation of the Food Acquisition Program(PAA) through CONAB RN in the period of 2003-2010 with the perception of all agents involved in the implementation of the government program.For the methodological trajectory it was adopted a descriptive bibliographical and documentary approach with triangular qualitative and quantitative, also called evaluative research.The theoretical model was supported by the authors Draibe (2001), Aguilar and Ander-Egg (1994) and Silva(2001), among others, that focused on family farming and evaluation of implementation of public policy having as a category of analysis the size implementation of policy and the latter divided into 10 theoretical dimensions.The universe consisted of three groups: the first were the managers and technicians from CONAB(RN and Brasilia), totaling 15 subjects. The second group was of associations/cooperatives that participated in the programin 2010, totaling a sample in each access of 15 representatives. The third group of subjects totaled with 309 representatives of governmental and non-governmental organizations that received donations of food for the same period. Semi-structured interviews and forms were adopted as instruments of data collection.The data were processed qualitatively by the analysis of content (interviews and documents) and quantitatively by means of statistical tests that allowed inferences and adoption of frequencies. Among the key find ingests that the program is not standing as a structure supported by planning. The interests of the performers do not necessarily converge with the objectives of the Food Acquisition Program (PAA). A shockof goals was identified (within the same program) when comparingthe financial agent (Ministry of Rural Development and of Social Development and Fight Against Hunger Ministry r) and the executor, CONAB/RN. Within the assessed dimensions, the most fragileis the sub-managerial decision-making and Organizational Environment and internal assessment, still deserves attention the sizeof logistical and operational Subsystem, as this also proved weak.The focusin the quest toexpand thequantificationof the resultsof theFood Acquisition Program (PAA)by CONAB/RN does forget a quality management focused on what really should be:the compliance with the institutional objectives of the government program.Finally, the perspective for the traded implementation should be re-examined because excessive discretion by managers along with technical staff has characterized there al role of the Food Acquisition Program (PAA) as public policy. We conclude that the implementation model, which apparently aggregates values to the benefitted citizens, has weakened the context of work on family farms having the management model of the implementation process be reviewed by the Federal Government and point too ther paths, which have as a guide line the emancipation and developmentof the field or in the field andat the same time enables the reduction of nutritional deficiency of beneficiaries in a balanced and coherent way

Sociabilidades e hedonismos: etnografia entre jovens usuários de substâncias psicoativas sintéticas Fortaleza Ceará

This dissertation shows a comparison between practices related to the body, to identities and to the health of young drug takers of synthetic and manipulated psychoactive substances living in Fortaleza. Through ethnographic accompaniment of parties and two social nets of young people I was able to verify the differences and similarities that make these addicted singular and plural in their notion of ethos and world vision. Notions of being hippie/alternative and being punk are present between these nets. Because their use and circulation are developed in environments usually distinct, it is possible to trace singular aspects between the nets and its actions. In parallel, on the attempt to build a triangulated data, I had information related to youth and drugs in local media and in governmental institutions bound to health mental and city security policies. With this junction of data I present a perspective to questions evolving formal and informal important controls to the conduction of their lives and identities. I present this as a sequel to well developed studies in Brasil about youth in interface to drug use, although still not very explored in the state of Ceará.

Arquitetura da (in)segurança: estudando relações entre configuração espacial, artifícios de segurança e violência urbana no bairro Manaíra, João Pessoa, Paraíba

João Pessoa, the capital city of the state of Paraíba (Northeast Brazil), is reputed throughout the country as a quiet place, although it has been acquiring, over the past years, an urban character with social implications similar to those of major metropolitan Brazilian areas. The new situation is evident by the social inequalities, with the creation of confined spaces, which segregate and cause enclosure of the inhabitants, leading to death the public space. This study correlates accessibility in spatial structure with two types of crime data, burglary and robbery, recorded in 2008 and 2009, by the Secretaria de Segurança da Paraíba (The government agency public in charge of safety), in the district of Manaíra, an upper middle class neighborhood, which has, in recent times, been considered one of the most violent areas in João Pessoa. Sought to understand connections between these events and morpho-social aspects of the built environment, where examined the spatial properties, such as accessibility of the urban net, the presence of control measures, the safety of buildings and their uses. Spatial properties were also validated by the observation of pedestrian flows at strategic points of the study area. It was concluded that the presence of intense flows helps to attract potential thieves, physical security and control offers little protection

Crenças e quebranças de um corpo que dança: poéticas do benzimento na criação cênica

This work is a discussion of the artistic process of an artist-researcher made from field research with benzedeiras and benzedores the state of Rio Grande do Norte. This is an investigation on the cultural universe of the popular benzeção as poetic element to the artistic dance. To discuss the different stages of the research and the relationships between the artist-researcher, the benzedeiras/benzedores and the creation/composition scenic, the work takes as reference the triangular relationship created by anthropologist Claude Lévi-Strauss, in his discussion on the effectiveness of symbols of healing, adapted to the context of benzeção . For dialogue between tradition, popular knowledge, scientific and artistic knowledge this work approaches as analytical reference the epistemological model of the type rhizome proposed by Deleuze and Guattari, understanding it as a model that seeks to form a network of relations in different paths of research, to establish connections between elements without target them or subordinating them. In the universe of benzeção , benzedeiras and benzedores carry a symbolic power that issued in whispered prayers, in peculiar gestures that form crosses in space, heal those who seek your prayers and blessing. In this research, the mixture of popular knowledge, artistic and academic knowledge, born an artistic work in the context of Performing Arts, more specifically dance, and between branches, saints, candles and conversations the work allowed other looks poetic for our popular culture, (re)asserting their cultural and human values through the art

Simulação computacional de medidas estereológicas em estruturas de metal duro (WC-Co)

This work focuses on the creation and applications of a dynamic simulation software in order to study the hard metal structure (WC-Co). The technological ground used to increase the GPU hardware capacity was Geforce 9600 GT along with the PhysX chip created to make games more realistic. The software simulates the three-dimensional carbide structure to the shape of a cubic box where tungsten carbide (WC) are modeled as triangular prisms and truncated triangular prisms. The program was proven effective regarding checking testes, ranging from calculations of parameter measures such as the capacity to increase the number of particles simulated dynamically. It was possible to make an investigation of both the mean parameters and distributions stereological parameters used to characterize the carbide structure through cutting plans. Grounded on the cutting plans concerning the analyzed structures, we have investigated the linear intercepts, the intercepts to the area, and the perimeter section of the intercepted grains as well as the binder phase to the structure by calculating the mean value and distribution of the free path. As literature shows almost consensually that the distribution of the linear intercepts is lognormal, this suggests that the grain distribution is also lognormal. Thus, a routine was developed regarding the program which made possible a more detailed research on this issue. We have observed that it is possible, under certain values for the parameters which define the shape and size of the Prismatic grain to find out the distribution to the linear intercepts that approach the lognormal shape. Regarding a number of developed simulations, we have observed that the distribution curves of the linear and area intercepts as well as the perimeter section are consistent with studies on static computer simulation to these parameters.

Da escala médica de saúde à experiência social do saudável :diálogo entre os espaços dos bares e das academias fisiculturistas na cidade do Natal-RN

Currently, we attend a reverence of concepts ahead as health, life, youth and body. In we widen amount the ideals concerned to the healthful life, to the quality of life, the longevity and joviality and the extremities of the body represented by the illness, for the virus infection, the physical deficiency and the aging. Of the historical shades of the plague, of the hunger and the war that gagged the defenseless individual and its body, in the current days we increase the search for a full and powerful life, independent of a religious imaginary to predict the epidemic curse, the threat represented for the sick people and the incarnate divine anger in the death; or of medical science presented in the spaces of the technology and the physiology, being left fragile the social and psychological dimensions of the human confined to the patient issue and, finally, the commanded urban health politics in quantitative goals of hygienic cleaning, of the medical techniques and the education citizen. For beyond these instances, emerges in our days a plural, close and biographical agreement well of the body and welfare. On the other hand, an understanding of the healthful life and well-being that more certifies the presence of something the one that clear landmarks amongst normality and the irregularity, the esteem and the destructive vice: it has a projection of healthful life measures without conceptual models of body and health under the doctor-scientific standard occidental. This thematic one will confide in way to the enclosure for spaces to the muscles and fitness exercises and the bars from the city of Natal, in the state of Rio Grande do Norte, Brazil, while comprehensive interchange concerning as the individual comes dealing with the notion the body and health and, mainly, if perceiving inside of its body and its health. Amongst these two spaces of typical leisure of the modern urban phenomenon, the hedonism bodily with its muscles and salience and one another form of hedonism in the fruition of allowed drugs will be across itself in a dialogue about which social s relationships are really in game in an imaginary construction amongst an doctor-aesthetic ideal of health and the social and subjective experience in the option for a healthful life

Estudo comparativo de técnicas de cascateamento de superfícies seletivas em frequência

This work presents a theoretical and numerical analysis for the cascading of frequency selective surfaces, which uses rectangular patches and triangular Koch fractals as elements. Two cascading techniques are used to determine the transmission and reflection characteristics. Frequency selective surfaces includes a large area of Telecommunications and have been widely used due to its low cost, low weight and ability to integrate with others microwaves circuits. They re especially important in several applications, such as airplane, antennas systems, radomes, rockets, missiles, etc.. FSS applications in high frequency ranges have been investigated, as well as applications of cascading structures or multi-layer, and active FSS. Furthermore, the analyses uses the microwave circuit theory, with the Floquet harmonics, it allows to obtain the expressions of the scattering parameters of each structure and also of the composed structure of two or more FSS. In this work, numeric results are presented for the transmission characteristics. Comparisons are made with experimental results and simulated results using the commercial software Ansoft Designer® v3. Finally, some suggestions are presented for future works on this subject

Desenvolvimento de esquema de controle com realimentação visual para um robô manipulador

This work proposes a kinematic control scheme, using visual feedback for a robot arm with five degrees of freedom. Using computational vision techniques, a method was developed to determine the cartesian 3d position and orientation of the robot arm (pose) using a robot image obtained through a camera. A colored triangular label is disposed on the robot manipulator tool and efficient heuristic rules are used to obtain the vertexes of that label in the image. The tool pose is obtained from those vertexes through numerical methods. A color calibration scheme based in the K-means algorithm was implemented to guarantee the robustness of the vision system in the presence of light variations. The extrinsic camera parameters are computed from the image of four coplanar points whose cartesian 3d coordinates, related to a fixed frame, are known. Two distinct poses of the tool, initial and final, obtained from image, are interpolated to generate a desired trajectory in cartesian space. The error signal in the proposed control scheme consists in the difference between the desired tool pose and the actual tool pose. Gains are applied at the error signal and the signal resulting is mapped in joint incrementals using the pseudoinverse of the manipulator jacobian matrix. These incrementals are applied to the manipulator joints moving the tool to the desired pose

Aplicação do método LTT às estruturas retangulares e triangulares em multicamadas e empilhadas em substratos PBG para comunicações móveis

Recently the planar antennas have been studied due to their characteristics as well as the advantages that they offers when compared with another types of antennas. In the mobile communications area, the need for this kind of antennas have became each time bigger due to the intense increase of the mobile communications that needs of antennas which operate in multifrequency and wide bandwidth. The microstrip antennas presents narrow bandwidth due the loss in the dielectric generated by radiation. Another limitation is the radiation pattern degradation due the generation of surface waves in the substrate. In this work some used techniques to minimize the disadvantages (previously mentioned) of the use of microstrip antennas are presented, those are: substrates with PBG material - Photonic Bandgap, multilayer antennas and with stacked patches. The developed analysis in this work used the TTL - Transverse Transmission Line method in the domain of Fourier transform, that uses a component of propagation in the y direction (transverse to the direction real of propagation z), treating the general equations of electric and magnetic field as functions of y and y . This work has as objective the application of the TTL method to microstrip structures with single and multilayers of rectangular and triangular patches, to obtaining the resonance frequency and radiation pattern of each structure. This method is applied for the treatment of the fields in stacked structures. The Homogenization theory will be applied to obtaining the effective permittivity for s and p polarizations of the substrate composed of PBG material. Numerical results for the triangular and rectangular antennas with single layer, multilayers resonators with triangular and rectangular patches are presented (in photonic and isotropic substrates). Conclusions and suggestions for continuity of this work are presented

Projeto, construção e análise de desempenho de um forno solar alternativo tipo caixa a baixo custo

An alternative box-type solar oven constructed from the scrap iron of a gas conventional cook is presented, which functions principles are the effect greenhouse and the concentration. The oven of the conventional cook is the baking enclosure where the absorber (pot) of the solar oven is located, being re-covered for a glass blade for the generation of the greenhouse effect isolated lateral and having deep its and for a composite the plaster base and EPS. Segments of plain mirrors had been placed in the laterals of the oven for the concentration of the radiation and a reflecting parabola was introduced in the baking enclosure for the exploitation of the incident reflected radiation in the interior of the oven. The oven is mobile to allow one better aiming of exactly in relation to the apparent movement of the sun. The thermal economic and of materials viabilities of the stove in study will be demonstrate The average internal temperature of the absorber was around 150°C and the internal temperature around 120°C. Will demonstrate that its low cost and good thermal performance represents basic characteristics for the viability of large use of such archetype, mainly for cooking the decreases and averages temperatures. One will reveal that the archetype in study is competitive with the box-type solar cooker conceived in the whole world

Otimização de forma aplicando B-splines sob critério integral de tensões

This work proposes a computational methodology to solve problems of optimization in structural design. The application develops, implements and integrates methods for structural analysis, geometric modeling, design sensitivity analysis and optimization. So, the optimum design problem is particularized for plane stress case, with the objective to minimize the structural mass subject to a stress criterion. Notice that, these constraints must be evaluated at a series of discrete points, whose distribution should be dense enough in order to minimize the chance of any significant constraint violation between specified points. Therefore, the local stress constraints are transformed into a global stress measure reducing the computational cost in deriving the optimal shape design. The problem is approximated by Finite Element Method using Lagrangian triangular elements with six nodes, and use a automatic mesh generation with a mesh quality criterion of geometric element. The geometric modeling, i.e., the contour is defined by parametric curves of type B-splines, these curves hold suitable characteristics to implement the Shape Optimization Method, that uses the key points like design variables to determine the solution of minimum problem. A reliable tool for design sensitivity analysis is a prerequisite for performing interactive structural design, synthesis and optimization. General expressions for design sensitivity analysis are derived with respect to key points of B-splines. The method of design sensitivity analysis used is the adjoin approach and the analytical method. The formulation of the optimization problem applies the Augmented Lagrangian Method, which convert an optimization problem constrained problem in an unconstrained. The solution of the Augmented Lagrangian function is achieved by determining the analysis of sensitivity. Therefore, the optimization problem reduces to the solution of a sequence of problems with lateral limits constraints, which is solved by the Memoryless Quasi-Newton Method It is demonstrated by several examples that this new approach of analytical design sensitivity analysis of integrated shape design optimization with a global stress criterion purpose is computationally efficient

Construção e análise de desempenho de um forno/fogão solar tipo caixa construído a partir de uma sucata de pneu

An alternative box-type solar cooker built starting from the scrap of a tire and a scrap of old office chair is presented, which principles functions are the effect greenhouse and the concentration. The tire served as structure for making of is the baking enclosure where the absorber (roasting pan 20x30cm) of the solar is located, being re-covered for a glass blade for the generation of the greenhouse effect isolated lateral and having deep its and for a composite the plaster base and EPS. Segments of plain mirrors had been placed in the laterals of the oven/cook for the concentration of the radiation and a reflecting parable was introduced in the baking enclosure for the exploitation of the incident reflected radiation inside of the oven/cook. The oven/cook is mobile to allow one better aiming of exactly in relation to the apparent movement of the sun. The thermal economic and of materials viabilities of the stove/cook in study will be demonstrate. The average internal temperature of the absorber was around 152,3°C and the internal temperature around 110°C. Will demonstrate that toits low cost and good thermal performance, represents basic characteristics for the viability of large use of such archetype, mainly for cooking the decreases and averages temperatures. One will reveal that the archetype in study is competitive with the box-type solar cooker conceived in the whole world

Viabilidade térmica de um forno solar fabricado com sucatas de pneus

The proposed design provides a solar furnace alternative, box-like, low-cost operation to be used in cooking, comprising three scrap tires to make the recycling thereof. The tires were coupled to each other, forming an enclosure, which stood on its bottom covered by a parable multiple mirrors made from a urupema (sieve indigenous) and the inner sides of the oven aluminum sheet painted black, obtained from beer cans, thus being made to obtain the increase in the concentration of solar radiation incident on the inside of the prototype studied. Two tires were attached, leaving an air layer between them, with the function of thermal insulation. The third tire aimed to support the other two and thermally insulate the bottom of the oven. Externally was placed a metal frame with flat mirrors to reflect the incident rays into the oven, having a mobility to correct the apparent motion of the sun. Its primary feature is the viability of clean, renewable energy to society by tackling the ecological damage caused by the large-scale use of wood for cooking food. The tests show that the furnace reached the maximum temperature of 123.8 °C and baking various foods such as pizza, bun, and other lasagne in an average time 50 minutes. Proves the feasibility of using the oven. Presenting still able to improve their performance with the addition of new materials, equipment and techniques

Análise técnica e econômica do processo de obtenção de espaguetes com adição de farinha de trigo integral e farinha de linhaça

This work studies the fabrication of spaghetti through the process at high temperatures through the use of flour added to flour and flaxseed meal, with the aim of evaluating the final product quality and estimate the cost of production. The values of moisture, ash, protein, wet gluten, gluten index, falling number and grain of flour and mixtures to test to be the possible use in mass manufacturing and technological criteria for compliance with current legislation. Spaghetti noodles type were manufactured by adding 10% and 20% flour and 10% and 20% flaxseed meal with performance of physical-chemical, sensory and rheological properties of the products. Further analysis was performed on the product acceptance and estimation of production cost in order to create subsidies to enable the introduction of products with greater acceptance and economic viability in the market by the food industry. On the rheology of the product test was cooking the pasta, specifying the volume increase, cooking time and percentage of solid waste. In the sensory evaluation was carried out the triangular test of product differentiation with 50 trained judges and acceptance testing by a hedonic scale with evaluation of the aspects color, taste, smell and texture. In defining the sensory profile of the product was performed with ADQ 9 judges recruited and trained at the factory, using unstructured scale of 9 cm, assessing the attributes of flavor of wheat, flax flavor, consistency, texture of raw pasta, raw pasta color and color of cooked pasta. The greater acceptance of product quality was good and the pasta with 20% flour, 10% followed by the full product, 10% and 20% flaxseed characterized the average quality of the criterion of loss analysis of solids, together with mass full commercial testing. In assessing the estimated cost of production, the two products more technologically feasible and acceptable (20% whole and 10% flaxseed) were evaluated in high temperature processes. With total cost of R $ 4,872.5 / 1,000 kg and R $ 5,354.9 / 1,000 kg respectively, the difference was related to the addition of lower inputs and higher added value in the market, flour and flaxseed meal. The comparative analysis of cases was confirmed the reduction in production time (10h), more uniform product to the drying process at high temperature compared to conventional