Estudo de revestimentos inorgânicos com inibidor de corrosão aplicado na superfície do concreto

The corrosive phenomenon on reinforced concrete structures is one of the most founded pathologies on the coastal area. With the objective to prevent the process development, or even, retard its beginning, it was studied the application of inorganic covering over concrete surfaces, after its cure, as well as, evaluate the efficiency of the covering applied on the concrete in reducing its porosity of concrete preventing the entrance of aggressive agents to preserve the integrity of the existing armor inside it, comparing the result obtained with the body-of-proof reference, that didn´t receive covering protection. On the concrete production it was used Portland Cement CP II 32, coarse aggregate, fine aggregate and water from the local distributive. Two types of covering were used, one resin based of silicon and solvent and other white cement based, selected sands and acrylic resin. The concrete mixture adopted was 1:1,5:2,5 (cement, fine aggregate, coarse aggregate) and 0.50 water/cement ratio. With the concrete on fresh state was made the experiment test to determinate the workability. On the hardened state was made the concrete resistance experiment, absorption of water and electrochemical experiments, through polarization curves. Also was held optical microscopy and Scanning Electron Microscopy experiments to analyze the layer of the covering applied to the concrete surface and the interface between the concrete and the layer. The obtained results shows that the covering applied to the concrete surface didn´t affect the resistance towards compression. On the absorption of water occurred a diminution of the percentage absorbed, improving the concrete development by making it more impermeable towards the entrance of aggressive agents. The electrochemical experiment results confirmed the water absorption results; the body-of-proof covered presented larger protection towards the development of corrosives process and retarded the evolution of the corrosive phenomenon

Análise de estruturas de superfície delgadas axissimétricas via método dos elementos finitos com utilização de elemento retilíneo

The present work deals with the linear analysis of bi-dimensional axisymmetric structures, through development and implementation of a Finite Element Method code. The structures are initially studied alone and afterwards compatibilized into coupled structures, that is, assemblages, including tanks and pressure vessels. Examples are analysed and, in order to prove accuracy, the results were compared with those furnished by the analytical solutions

Estudo térmico de um sistema solar de aquecimento de água residencial para duas configurações de superfície absorvedora

It presents a solar collector to be used in a system for heating water for bathing, whose main characteristics are its low cost and easy manufacturing and assembly. The absorbing surface of the collector is formed by an aluminum plate with eight flaps where they lodge PVC pipes. The catchment area of solar radiation corresponds to 1.3 meters. The collector box was made of wood, is covered by transparent glass and thermal insulation of tire chips and expanded polystyrene (EPS). Absorber tubes were connected in parallel through the use of PVC fittings and fixed to the plate by the use of metal poles and rivets. The entire absorber received paint flat black for better absorption of sunlight. The system worked on a thermosiphon assembly and absorber of the collector has been tested in two configurations: with the tubes facing up, directly exposed to the impact of sunlight and facing down, exchanging heat with the plate by conduction. It was determined the most efficient configuration for the correct purpose. The solar collector was connected to a thermal reservoir, also alternative, low-cost forming the system of solar water heating. We evaluated thermal parameters that proved the viability of the heating system studied

Investigação dos processos hidrossedimentológicos em parcela experimental no semi-árido potiguar

In northeastern semiarid, seasonality on precipitation temporal distribution, high intensity storm events and inadequate management of native vegetation can promote soil erosion. Vegetation removal causes soil surface exposure, reduces soil water storage capacity and can be the source degradation processes. In this context, this approach aims to analyze water and soil erosion processes on a 250 m2 undisturbed experimental plot with native vegetation, slope 2.5% by using 2006 and 2007 monitoring data. The site was instrumented to monitor rainfall, overland flow runoff and erosion by using a 5 m³ tank downstream the plot. Soil erosion monitoring was made by transported sediment and organic matter collection after each event. Field infiltration experiments were made at 16 points randomly distributed within the plot area by using a constant head infiltrometer during drought and rainy seasons, respectively. Infiltration data revealed high spatial and temporal variability. It was observed that during the beginning of the rainy period, 77% of the events showed runoff coefficient less than 0.05. As the rainy season began, soil water increase produced annual species germination. High intensity storms resulted in runoff coefficients varying between 0.33 and 0.42. Once the annual species was established, it was observed that approximately 39% of the events produced no runoff, which reflects an increase on soil water retention capacity caused by the vegetation. A gradual runoff reduction during the rainy season emphasizes the effect of vegetative density increase. Soil erosion observed data allowed to fit an empirical relationship involving soil loss and precipitation height, which was used to analyze the plot installation impact on soil erosion. Observed soil loss in 2006 and 2007 was 230 Kg/ha and 54 Kg/ha, respectively

Estudo de revestimentos inorgânicos com inibidor de corrosão aplicado na superfície do concreto

The corrosive phenomenon on reinforced concrete structures is one of the most founded pathologies on the coastal area. With the objective to prevent the process development, or even, retard its beginning, it was studied the application of inorganic covering over concrete surfaces, after its cure, as well as, evaluate the efficiency of the covering applied on the concrete in reducing its porosity of concrete preventing the entrance of aggressive agents to preserve the integrity of the existing armor inside it, comparing the result obtained with the body-of-proof reference, that didn´t receive covering protection. On the concrete production it was used Portland Cement CP II 32, coarse aggregate, fine aggregate and water from the local distributive. Two types of covering were used, one resin based of silicon and solvent and other white cement based, selected sands and acrylic resin. The concrete mixture adopted was 1:1,5:2,5 (cement, fine aggregate, coarse aggregate) and 0.50 water/cement ratio. With the concrete on fresh state was made the experiment test to determinate the workability. On the hardened state was made the concrete resistance experiment, absorption of water and electrochemical experiments, through polarization curves. Also was held optical microscopy and Scanning Electron Microscopy experiments to analyze the layer of the covering applied to the concrete surface and the interface between the concrete and the layer. The obtained results shows that the covering applied to the concrete surface didn´t affect the resistance towards compression. On the absorption of water occurred a diminution of the percentage absorbed, improving the concrete development by making it more impermeable towards the entrance of aggressive agents. The electrochemical experiment results confirmed the water absorption results; the body-of-proof covered presented larger protection towards the development of corrosives process and retarded the evolution of the corrosive phenomenon

Identificando práticas musicais e processos de aprendizagem musical no contexto urbano de Montes Claros-MG

MENDES,Jean Joubert Freitas; BRITO,Leila de Jesus Ferreira de;CARMO, Raiana Alves Maciel Leal do. Identificando práticas musicais e processos de aprendizagem musical no contexto urbano de Montes Claros-MG. In: ENCONTRO DA ASSOCIAÇAO NACIONAL DE PESQUISA E POS-GRADUAÇAO EM MUSICA (ANPPOM), 17.,2007, Sao Paulo. Anais... Sao Paulo: ANPPOM, 2007.

Coevolução e as práticas isomórficas de gestão: um estudo sobre os processos de mudanças institucionais no Instituto Federal de Educação, Ciência e Tecnologia do RN

The Federal Institution for Education, Science and Technology, in its historical path, has been living different changes. The transformations occurred along the way have been determined by coercive forces from the institutional environment, which has became more and more broad and complex throughout the time, obtaining diverse characteristics and new elements such as non institutional factors1 which started to contribute with the other changes. In this context, this work aims to study the isomorphic practices of the managers in the institutional changes process of the IFRN in 1998 and 2008, as of a theoretical coevolutionary perspective (CHILD; RODRIGUES; LEWIN; CARROL; VOLBERDA, 2003). This theory brings a new point of view for the organization analysis to the organizational studies, since it offers a non deterministic and non linear lection of the evolution process, which means, a coevolution. Thus, the organizations and their institutional and non institutional environment auto evolve, auto organize and auto reproduce. Therefore, the institutional and non institutional factors of the macro environment keep a continuous interdependence relationship with the organizations. For the means of this study, it is important to understand that is impossible to comprehend the object, the isomorphic practices, without considering that the previous institutional changes and its evolutions, its continuations and discontinuations, important in the coevolution process. As such, to call upon the institutional historical track is a fundamental aspect to materialize this study, for the recursive movement is indeed present in the coevolution. Another important point to make this research effective is that it is not possible to abdicate from the hologramatic view2 of this study, which considers the object, the isomorphic practices, part of the whole and this whole is also in the parts, therefore it is impossible to comprehend the object of study outside the context where it belongs. With this, as of the objective previously proposed, it is necessary to describe the characteristics of coevolution of the institutional changes related in 1998 and 2008; analyze the dynamic of the isomorphic mechanisms in its respective institutional change process; and describe the lessons learned which the isomorphic practices left to the IFRN, regarding its benefits and difficulties. All these transformations happened through coercive forces3 of the institutional environment. As of the Nineties, these forces became stronger, the environment became broader and more complex, with the emergency of new environmental factors. This study proposed to study the managing process and its practices, related to the micro environment, although it is required to articulate these actions, the demands and requirements from the macro environment. To make this research effective, semi structured interviews have been conducted with the managers who participated in both institutional change processes. In the results analysis, it has been possible to verify the particularity of each change, the one from 1998 with a strong normative action of the managers against coercive forces from the government for the search of recognition and the institutional legitimation and the one in 2008, which has been characterized by the normative action by managers in agreement with the coercive forces from the government, in favor of the government policy for the technological professional education. However, the results analysis it is possible to notice the evidence of a belonging feeling from the interviewed managers

Mudança dos processos de negócios e adequação da TI nas empresas em decorrência da implantação do sistema público de escrituração digital SPED: um estudo de casos múltiplos

Companies have always been organized by processes, often imperceptible to its employees. With the advancement of technology, organizational processes currently run an organization through computers, and thus generate immediate information that is available to each sector. With the objective of seeking business information in real time, the government created the SPED - Public System of Digital, which involves three subsystems, which are the Electronic Invoice, Digital Accounting Bookkeeping and Digital Tax Bookkeeping. This system is revolutionizing the business structures when gathering, in an innovative way, all information and interlinked business processes. For the implementation of SPED, a revision in the organizational processes is required, since the information is generated and is sent online to the government, without mistakes. Thus the study aimed to analyze the change brought about by the implementation of the Public System of Digital SPED in the main business processes. In order to do so, we have performed a multiple case study involving three companies in the state of Para, two operate in wholesale and one explores agribusiness. The Data collection was performed by accounting professionals, IT and managers. According to the results obtained, it was found that in two companies, the IT infrastructure was capable of deploying the new system without major problems, while one company had more difficulties to cope with the new system. However, all companies had to examine its processes to make the customizations needed to fit. It was also observed that there is no IT Governance in two companies. Therefore, we recommend the use of an appropriate model, not only for the implementation of SPED, but as a way to manage and extract better results from investment in information technology

Configurando a cidade contemporânea em Natal : os processos espaciais em Ponta Negra

This dissertation is about the spatial configuration in Natal and processes in the Ponta Negra neighborhood today. Ponta Negra has undergone a number of critical social and spatial changes due to tourism development after the 1990s. It is of special interest to consider the intensification of real estate investment after 2000, when the new airport terminal, located in the neighboring municipality of Parnamirim, was in use. Ponta Negra is the place where most tourists go to, so attracting considerable public investments. New agents of transformation have produced change in the neighborhood as well. The present study aims at analysing the spatial processes in this part of the city. Here, the spatial configuration that resulted from extended real estate investments, both public and private, in recent years, is analysed in detail. The study identifies the multually differentiated, however internally homogenous areas. The concepts of production of space, contemporanean urban development and spatial dynamics are discussed. The research is based on document analysis and field work. Results were plotted to maps and tables. A detailed analysis of the spatial processes in the Ponta Negra neighborhood is undertaken as a conclusion, considering the contemporanean global scenario

Interesses da habitação social : políticas e processos no Rio Grande do Norte

En 2003, le gouvernement brésilien (gestion Lula) a initié une nouvelle phase dans son histoire de l habitation, en intensifiant les constructions de logements sociaux au Brésil. Un tel accroissement a eut des répercussions tant en ville comme à la campagne, et fût marqué dans le Rio Grande do Norte, par la production a grande échelle d ensembles d habitations, dans les programmes de Gouvernement. Afin de viabiliser ces transformations, des instruments politiques, financiers et de gestion ont étés articulés conjointement, utilisant la répétition d une typologie d édification, comme modèle, accompagnée de la reproduction d une morphologie dans les constructions de logements sociaux. Afin de comprendre ce processus nous introduisons une recherche urbanistique et socio-économique du problème du logement social au Brésil, en cherchant à mettre en relation les aspects techniques avec les questions historique, professionnelles et culturelles, éléments complémentaires. Notre analyse cherche a identifier comment les politiques de gestion et financement officielles (administrées dans sa grande majorité par la Caisse Économique Fédérale -CEF-), influencent le processus de conception de projets, en provoquant les répétitions de type/morphologiques, déjà citées. Basée sur l observation directe au cour de deux expériences différenciées pour du logement social en milieu rural, au Rio Grande do Norte, nous montrerons aussi certaines limitations et possibilités des acteurs sociaux, face aux agents et politiques officielles pour le logement social au Brésil, proposant des solutions alternatives standardisées qui caractérisent le résultat des projets financées et gérés par la CEF. Nos principales références théoriques et méthodologiques sont Nabil Bonduki (1998), David Harvey (2009,1982), Henry Lefèbvre (1970), Ermínia Maricato (2010, 2009, 2000, 1987) et Raquel Rolnik (2010, 2009, 2008, 1997)

O processo de urbanização de Mossorò: dos processos históricos à estrutura urbana atual

The general objective of this academic work is to analyze the relationship between the territorial division and the urban expansion process of Mossoró city, understood here as the production and occupation of space. The urban expansion in Mossoró, since its formation as settlement in 1772 until current days, identifies with the Brazilian urbanization process whose growth is determined by the capitalist development. Thus, the expansion was determined by several economical specializations imposed by the territorial division of work which occurs at an interregional level, and, sometimes at an international level. Then, each specialization determined a moment of the urban expansion of the city, as follows: a) The cattle farmer specialization, between 1772 and 1857, when the urban expansion was shy, is summarized to a commercial square that received goods from Aracati aiming to cover a wide rural area; b) The commercial emporium specialization, between 1857 and 1930, when the urban expansion took an important impulse with the concentration of public and private capitals; c) The salt industry and the agricultural-industrial exporter specialization inside a state of development policy, between 1930 and 1970, when the urban expansion, joined to the settlement of the working class in the urban soil, developed along an important axis -the railway; d) The render of services specialization inside a state of intervention policy, between 1970 and 1990, when the urban expansion was characterized by the accelerated growth rhythm, by the reuse of some spaces, and by space segregation of demanding people; e) The render of services policy inside a neoliberal state policy, since 1990 until current days, when the urban expansion reduced its rhythm abruptly, when only small alterations occurred in the existing spaces. It focused on social policies and on several slums eradication programs. Finally, the territorial structure is deeply articulated with others, no territorial, but economical, social and political, which happens at a national, regional and local rate. Only within a historical and conceptual panorama, it was possible to explain the urban expansion in Mossoró from its formation in 1772 until current days. Therefore, this work is a several discipline analysis of the urbanization process existing in Mossoró

Influência dos fatores abióticos sobre a variação espaço-temporal de paralonchurus brasiliensis (Steindachner, 1875) (pisces, sciaenidae) componente da fauna acompanhante da pesca de camarões no litoral Norte de São Paulo

Knowledge of the environmental factors influence on the spatial-temporal variation of fishes is important to fisheries management and conservation. Thus, the aim of this work was to analyze the influence of the abiotical factors on the spatial-temporal distribution of Paralonchurus brasiliensis (Pisces, Sciaenidae) caught by-catch with the shrimp fishing of Ubatuba and Caraguatatuba regions, north coast of São Paulo State. The fishes were captured every month from January to December 2002. Samples were collected by otter trawl at 5, 10, 15, 20, 25, 30 and 35m depths. The temperatures (surface and bottom), salinities (surface and bottom), sediment features and organic matters were verified for each depth. During all period of the study 12.642 specimens of P. brasiliensis were captured at Ubatuba and 17.166 at Caraguatatuba, which totalized the biomass of 267 for the first and 339kg for the other region. The females outnumbered males in fish population. The greatest values of biomass and number of individuals were registered at the summer and autumn seasons, while the lowest values were observed at the winter and spring seasons. The greatest abundances were found from 15 to 25m depth. In this study, it was verified that P. brasiliensis is a coastal waters associate species. The spatialtemporal distribution of P. brasiliensis is affected by intrusion of SACW and depth for the coastal region and by depth and sediment in sheltered areas such as Caraguatatuba

Avaliação do estresse oxidativo induzido por superfícies de titânio

Commercially pure Titanium (cp Ti) is a material largely used in orthopedic and dental implants due to its biocompatibility properties. Changes in the surface of cp Ti can determine the functional response of the cells such as facilitating implant fixation and stabilization, and increased roughness of the surface has been shown to improve adhesion and cellular proliferation. Various surface modification methods have been developed to increase roughness, such as mechanical, chemical, electrochemical and plasma treatment. An argon plasma treatment generates a surface that has good mechanical proprieties without chemical composition modification. Besides the topography, biological responses to the implant contribute significantly to its success. Oxidative stress induced by the biomaterials is considered one of the major causes of implant failure. For this reason the oxidative potential of titanium surfaces subjected to plasma treatment was evaluated on this work. CHO-k1 cells were cultivated on smooth or roughed Ti disks, and after three days, the redox balance was investigated measuring reactive oxygen species (ROS) generation, total antioxidant capacity and biomarkers of ROS attack. The results showed cells grown on titanium surfaces are subjected to intracellular oxidative stress due to hydrogen peroxide generation. Titanium discs subjected to the plasma treatment induced less oxidative stress than the untreated ones, which resulted in improved cellular ability. Our data suggest that plasma treated titanium may be a more biocompatible biomaterial.

Processamento e análise de imagens na caracterização da superfície do titânio submetido a um ensaio de cultura de células

This work aims to develop a methodology for analysis of images using overlapping, which assists in identification of microstructural features in areas of titanium, which may be associated with its biological response. That way, surfaces of titanium heat treated for 08 (eight) different ways have been subjected to a test culture of cells. It was a relationship between the grain, texture and shape of grains of surface of titanium (attacked) trying to relate to the process of proliferation and adhesion. We used an open source software for cell counting adhered to the surface of titanium. The juxtaposition of images before and after cell culture was obtained with the aid of micro-hardness of impressions made on the surface of samples. From this image where there is overlap, it is possible to study a possible relationship between cell growth with microstructural characteristics of the surface of titanium. This methodology was efficient to describe a set of procedures that are useful in the analysis of surfaces of titanium subjected to a culture of cells

Desenvolvimento de tubulação em compósito polimérico revestida externamente com poliuretano de alta densidade

Pipelines for the transport of crude oil from the production wells to the collecting stations are named production lines . These pipes are subjected to chemical and electrochemical corrosion according to the environment and the type of petroleum transported. Some of these lines, depending upon the composition of the fluid produced, may leak within less than one year of operation due to internal corrosion. This work aims at the development of composite pipes with an external protecting layer of high density polyurethane for use in production lines of onshore oil wells, meeting operational requirements. The pipes were manufactured using glass fibers, epoxy resin, polyester resin, quartz sand and high density polyurethane. The pipes were produced by filament winding with the deposition of high density polyurethane on the external surface and threaded ends (API 15 HR/PM-VII). Three types of pipes were manufactured: glass/epoxy, glass/epoxy with an external polyurethane layer and glass/epoxy with an intermediate layer of glass fiber, polyester, sand and with an external polyurethane layer. The three samples were characterized by Scanning Electronic Microscopy (SEM) and for the determination of constituent content. In addition, the following tests were conducted: hydrostatic test, instant rupture, shorttime failure pressure, Gardner impact, transverse stiffness and axial tension. Field tests were conducted in Mossoró RN (BRAZIL), where 1,677 meters of piping were used. The tests results of the three types of pipes were compared in two events: after two months from manufacturing of the samples and after nine months of field application. The results indicate that the glass/epoxy pipes with an intermediate layer of fiber glass composite, polyester e sand and with an external layer of high density polyurethane showed superior properties as compared to the other two and met the requirements of pressure class, axial tensile strength, transverse stiffness, impact and environmental conditions, for onshore applications as production lines