Responsabilidade social empresarial: uma avaliação do Projeto Escola de Informática e Cidadania da Mineradora Y situada no Estado do Pará

The subject Responsibility Enterprise Social (RSE) is relatively recent in the half national academic and the world of the management businesses as practical. For the lack of socialization of experiences and clarity of concepts, shunting lines in the agreement of the subject and the conduction of the interventions occur. It was looked to inquire, in this research, the development of the project of Social Responsibility Enterprise ―School of Computer science and Citizenship‖ of a situated company in the State of Pará, objectifying to evaluate it and later to understand it. For this, one searched to describe the characteristics and structure of the School, to identify to the lines and lines of direction adopted for this Project and to identify to the influence and results of the same in the life of pupils, professors and egresses of the School. It is characterized for a study of case with qualitative boarding of descriptive character, carried through interviews structuralized in a sample of 21 divided members of the School between professors, pupils and egresses. It was used of the analysis of categorical content, having as axle for the interpretation of the data the Social Responsibility, the Digital Inclusion and the Education. The gotten results inform that the infrastructure has challenges to face, point disparities between the conception and practical of the categories characterized in the Politician-Pedagogical Project of the EIC and the influence that, exactly under limits, the life of the professors, pupils reaches and egress. One evidenced that Social action for damages of this company when come back toward this project, they had not been evidenced. For this prism, these actions had only remained in the assistencialist speech and not structural, being thus, the company is not fulfilling its paper of transforming element of the reality of its clientele and the population that lives in it s around

Do modelo geométrico ao modelo físico: o tridimensional na educação do arquiteto e urbanista

In the teaching practice of architecture and urbanism in Brazil, educational legislation views modeling laboratories and workshops as an indispensable component of the infrastructure required for the good functioning of any architectural course of study. Although the development of information technology at the international level has created new possibilities for digital production of architectural models, research in this field being underway since the early 1990s, it is only from 2007 onwards that such technologies started to be incorporated into the teaching activity of architecture and urbanism in Brazil, through the pioneering experience at LAPAC/FEC/UNICAMP. It is therefore a recent experiment whose challenges can be highlighted through the following examples: (i) The implementation of digital prototyping laboratories in undergraduate courses of architecture and urbanism is still rare in Brazil; (ii) As a new developing field with few references and application to undergraduate programs, it is hard to define methodological procedures suitable for the pedagogical curricula already implemented or which have already been consolidated over the years; (iii) The new digital ways for producing tridimensional models are marked with specificities which make it difficult to fit them within the existing structures of model laboratories and workshops. Considering the above, the present thesis discusses the tridimensional model as a tool which may contribute to the development of students skills in perceiving, understanding and representing tridimensional space. Analysis is made of the relation between different forms of models and the teaching of architectural project, with emphasis on the design process. Starting from the conceptualization of the word model as it is used in architecture and urbanism, an attempt is made to identify types of tridimensional models used in the process of project conception, both through the traditional, manual way of model construction as well as through the digital ones. There is also an explanation on how new technologies for digital production of models through prototyping are being introduced in undergraduate academic programs of architecture and urbanism in Brazil, as well as a review of recent academic publications in this area. Based on the paradigm of reflective practice in teaching as designed by Schön (2000), the experiment applied in the research was undertaken in the integrated workshop courses of architectural project in the undergraduate program of architecture and urbanism at Universidade Federal do Rio Grande do Norte. Along the experiment, physical modeling, geometric modeling and digital prototyping are used in distinct moments of the design process with the purpose of observing the suitability of each model to the project s phases. The procedures used in the experiments are very close to the Action Research methodology in which the main purpose is the production of theoretical knowledge by improving the practice. The process was repeated during three consecutive semesters and reflection on the results which were achieved in each cycle helped enhancing the next one. As a result, a methodological procedure is proposed which consists of the definition of the Tridimensional Model as the integrating element for the contents studied in a specific academic period or semester. The teaching of Architectural Project as it is developed along the fifth academic period of the Architecture and Urbanism undergraduate program of UFRN is taken as a reference

Inserção da informática nos cursos de Arquitetura e Urbanismo do Brasil (1994 2006): diagnósticos, rebatimentos e perspectivas nas Instituições Federais de Ensino Superior do Nordeste: UFRN, UFPB e UFPE

This work supports the formalist education s improvement of the Brazilian architect and urban designer through a better application and systematization of the computer science s teaching potentialities. The research analyzes the discipline introduction in the Brazilian courses: Computer Science Applied to Architecture and Urbanism (InfoAU) in the Architecture and Urbanism Courses of Brazil (CAUs). It goes since the discipline was obligated by the MEC s Regulation nr. 1.770 from 1994 until the CNE/CES Resolution nr. 6 from 2006; it comprehends the discipline implantation, development and current context, in order to get more detailed, the research analyses three federal universities from the Northeast of the country: UFRN, UFPB and UFPE. Once identified the historical educational needs in the CAUs, the study focus on the computer science s increasing potential as an agent of integration, communication, development and knowledge/data management. It points out new social perspectives for a better use of this tool/mechanism, which adequately structuralized and integrated, creates propitious educational and professional performance/recycling conditions and a propeller instrument of research and extension activities. Among this work, it is suggested the aggregation of elements, which are complementary to the InfoAU discipline s reorganization, throughout a computerization s plan for the CAUs, extensive to the professional formation, generating a virtuous cycle in several activities of the academic, administrative and, research and extension s departments. Therefore, the InfoAU in the Brazilian CAUs context was analyzed; the main solutions and problems found were systemized; the possibilities of computer science s uses inside AU ware structuralized, InfoAU discipline s improvement plan was also defined, as well as strategies for the implementation of the computerization s plan for the CAUs, which would guarantee its maintenance in a continuity perspective

A informática como uma ferramenta de apoio a inclusão do deficiente visual

An inclusive environment has its foundations in the belief that all people are entitled to participate, to live as normal a life as possible, without discrimination, especially in education. This is to ensure equal opportunities. For individuals with special needs, the use of computers and digital materials is not an alternative, but one of the only forms of access to information. For the visually impaired, they start from the beginning to enter the university, through the selection processes, not always accessible. For those who can, other difficulties arise, undermining the initial enthusiasm and generating a large rate of dropouts. In most cases, these students will depend on the goodwill of colleagues and volunteers for the reading of texts in the basic literature of the disciplines studied. The high cost of technology assisted allied to a lack of resources and knowledge of curricular adaptations, prevents many teachers help these students in an appropriate manner. This thesis seeks to contribute to the inclusion of the visually impaired student pointing alternatives that can help in caring education. The research was conducted specifically for the doctorate during the period 2001 to 2006, the cities of Natal, Salvador and Curitiba, and is based mainly on the methodology of action research. The objective was the construction of Virtual Teaching Support Center , structured in a Web portal that can serve as a resource to help support teachers, staff and other users concerned with the process of inclusion of people with needs special education, with the goal of assimilation of educational opportunities, with the support of resources and methods. The inclusion is for everyone because we are all different

Uma Aplicação de Redes Neurais Auto-Organizaveis à Reconstrução Tridimensional de Superfícies

We propose a multi-resolution approach for surface reconstruction from clouds of unorganized points representing an object surface in 3D space. The proposed method uses a set of mesh operators and simple rules for selective mesh refinement, with a strategy based on Kohonen s self-organizing map. Basically, a self-adaptive scheme is used for iteratively moving vertices of an initial simple mesh in the direction of the set of points, ideally the object boundary. Successive refinement and motion of vertices are applied leading to a more detailed surface, in a multi-resolution, iterative scheme. Reconstruction was experimented with several point sets, induding different shapes and sizes. Results show generated meshes very dose to object final shapes. We include measures of performance and discuss robustness.

Revisitando o problema de visibilidade para visualização tridimensional

We revisit the problem of visibility, which is to determine a set of primitives potentially visible in a set of geometry data represented by a data structure, such as a mesh of polygons or triangles, we propose a solution for speeding up the three-dimensional visualization processing in applications. We introduce a lean structure , in the sense of data abstraction and reduction, which can be used for online and interactive applications. The visibility problem is especially important in 3D visualization of scenes represented by large volumes of data, when it is not worthwhile keeping all polygons of the scene in memory. This implies a greater time spent in the rendering, or is even impossible to keep them all in huge volumes of data. In these cases, given a position and a direction of view, the main objective is to determine and load a minimum ammount of primitives (polygons) in the scene, to accelerate the rendering step. For this purpose, our algorithm performs cutting primitives (culling) using a hybrid paradigm based on three known techniques. The scene is divided into a cell grid, for each cell we associate the primitives that belong to them, and finally determined the set of primitives potentially visible. The novelty is the use of triangulation Ja 1 to create the subdivision grid. We chose this structure because of its relevant characteristics of adaptivity and algebrism (ease of calculations). The results show a substantial improvement over traditional methods when applied separately. The method introduced in this work can be used in devices with low or no dedicated processing power CPU, and also can be used to view data via the Internet, such as virtual museums applications

A Informática como recurso didático para a aprendizagem de Física no ensino médio

The accomplishment of this work was motivated by our concerns, while teacher of Physics discipline, in the medium teaching and in the higher education, where we have been observing a lot of difficulties in the students' acting, to the they try to give pursuit out to their studies of the classroom, because of the lack of appropriate equipments, or even, of a laboratory where they can put in practice the studied contents. The work aims at to build and to test an educational software that it serves as tool auxiliadora in Physics learning in the Medium Teaching, in the area of electricity, with emphasis in the study of the electrodynamic in resistors. The developed software comes as an alternative to the learning problems, putting the computer science as auxiliary tool, because, besides being an alternative in the middle of the technological expansion, endowed with several resources, it stimulates the significant learning, according to David Ausubel's perspective. A software containing a program destined to the applicability of physics contents in the branch of the electricity is presented as an auxiliary tool, where the student can, not just, to review the contents presented at room, as well as for in practice, through a virtual laboratory, some of these contents, besides testing their knowledge through a bank of discursive subjects. The evaluation of the developed software was made submitting him/it to the professionals' of physics area appreciation. Equally, through continuous evaluations, they were made comparisons among the students' of five different groups acting, in the same school, that you/they were used of the program as tool of his auxiliary learning, and the acting of those that didn't use it

Estudo integrado de análogo a reservatórios petrolíferos fluviais: caracterização, parametrização e modelagem tridimensional de depósitos recentes do Rio Assu (Rio Grande do Norte/Brasil)

This work shows a integrated study of modern analog to fluvial reservoirs of Açu Formation (Unit 3). The modern analog studied has been Assu River located in the same named city, Rio Grande do Norte State, Northeast of Brazil. It has been developed a new methodology to parameterizating the fluvial geological bodies by GPR profile (by central frequency antennas of 50, 100 and 200 MHz). The main parameters obtained were width and thickness. Still in the parameterization, orthophotomaps have been used to calculate the canal sinuosity and braided parameters of Assu River. These information are integrated in a database to supply input data in 3D geological models of fluvial reservoirs. It was made an architectural characterization of the deposit by trench description, GPR profile interpretation and natural expositions study to recognize and describe the facies and its associations, external and internal geometries, boundary surfaces and archtetural elements. Finally, a three-dimensional modeling has been built using all the acquired data already in association with real well data of a reservoir which Rio Assu is considered as analogous. Facies simulations have been used simple kriging (deterministic algorithm), SIS and Boolean (object-based, both stochastics). And, for modeling porosities have used the stochastic algorithm SGS

Caracterização geológica tridimensional e monitoramento de dunas no litoral oriental do Rio Grande do Norte

This work presents geophysical and geological results obtained in a dunefield located in the east coast of Rio Grande do Norte State, with the aim to recognize the aeolian body depositional geometries to a future geologic modeling of the aeolian petroliferous reservoirs. The research, which was done in blowouts region situated at Nisia Floresta Municipally, included the characterization of external geometries with GPS and internal geometry analysis by GPR. Data was integrated in GoCAD software, where it was possible the three-dimensional characterization and interpretation of the studied deposits. The interpretation of GPR profiling allowed identifying: First-order bounding surfaces that separated the aeolian deposits of the Barreiras Formation rocks; Second-order bounding surfaces, which limit dune generations and Third-order bounding surfaces, a reactivation surface. This classification was based and adapted by the Brookfield (1977) and Kocurek (1996) propose. Four radarfacies was recognized: Radarfacies 1, progradational reflectors correlated to foresets of the dunes, Radarfacies 2, plain parallels reflectors related to sand sheets, Radarfacies 3, plain parallels reflectors associated to reworking of the blowout dune crest and Radarfacies 4, mounded reflectors associated to vegetated mound of sand or objects buried in subsurface. The GPR and GPS methods was also employed to the monitoring of dunefields susceptible to human activities in Buzios Beach, where the constructions along the blowout region and the tourism are changing the natural evolution of the deposits. This fact possibly to cause negative impacts to the coastal zone. Data obtained in Dunas Park, a unit environmental conservation, was compared with information of the Buzios Beach. There is a major tendency of erosion in Buzios, specifically in blowout corridor and blowout dune

Responsabilidade social empresarial: uma avaliação do projeto "Escola de Informática e Cidadania" da Mineradora "Y" situada no Estado do Pará

The subject Responsibility Enterprise Social (RSE) is relatively recent in the half national academic and the world of the management businesses as practical. For the lack of socialization of experiences and clarity of concepts, shunting lines in the agreement of the subject and the conduction of the interventions occur. It was looked to inquire, in this research, the development of the project of Social Responsibility Enterprise ―School of Computer science and Citizenship‖ of a situated company in the State of Pará, objectifying to evaluate it and later to understand it. For this, one searched to describe the characteristics and structure of the School, to identify to the lines and lines of direction adopted for this Project and to identify to the influence and results of the same in the life of pupils, professors and egresses of the School. It is characterized for a study of case with qualitative boarding of descriptive character, carried through interviews structuralized in a sample of 21 divided members of the School between professors, pupils and egresses. It was used of the analysis of categorical content, having as axle for the interpretation of the data the Social Responsibility, the Digital Inclusion and the Education. The gotten results inform that the infrastructure has challenges to face, point disparities between the conception and practical of the categories characterized in the Politician-Pedagogical Project of the EIC and the influence that, exactly under limits, the life of the professors, pupils reaches and egress. One evidenced that Social action for damages of this company when come back toward this project, they had not been evidenced. For this prism, these actions had only remained in the assistencialist speech and not structural, being thus, the company is not fulfilling its paper of transforming element of the reality of its clientele and the population that lives in it s around

Do modelo geométrico ao modelo físico: o tridimensional na educação do arquiteto e urbanista

In the teaching practice of architecture and urbanism in Brazil, educational legislation views modeling laboratories and workshops as an indispensable component of the infrastructure required for the good functioning of any architectural course of study. Although the development of information technology at the international level has created new possibilities for digital production of architectural models, research in this field being underway since the early 1990s, it is only from 2007 onwards that such technologies started to be incorporated into the teaching activity of architecture and urbanism in Brazil, through the pioneering experience at LAPAC/FEC/UNICAMP. It is therefore a recent experiment whose challenges can be highlighted through the following examples: (i) The implementation of digital prototyping laboratories in undergraduate courses of architecture and urbanism is still rare in Brazil; (ii) As a new developing field with few references and application to undergraduate programs, it is hard to define methodological procedures suitable for the pedagogical curricula already implemented or which have already been consolidated over the years; (iii) The new digital ways for producing tridimensional models are marked with specificities which make it difficult to fit them within the existing structures of model laboratories and workshops. Considering the above, the present thesis discusses the tridimensional model as a tool which may contribute to the development of students skills in perceiving, understanding and representing tridimensional space. Analysis is made of the relation between different forms of models and the teaching of architectural project, with emphasis on the design process. Starting from the conceptualization of the word model as it is used in architecture and urbanism, an attempt is made to identify types of tridimensional models used in the process of project conception, both through the traditional, manual way of model construction as well as through the digital ones. There is also an explanation on how new technologies for digital production of models through prototyping are being introduced in undergraduate academic programs of architecture and urbanism in Brazil, as well as a review of recent academic publications in this area. Based on the paradigm of reflective practice in teaching as designed by Schön (2000), the experiment applied in the research was undertaken in the integrated workshop courses of architectural project in the undergraduate program of architecture and urbanism at Universidade Federal do Rio Grande do Norte. Along the experiment, physical modeling, geometric modeling and digital prototyping are used in distinct moments of the design process with the purpose of observing the suitability of each model to the project s phases. The procedures used in the experiments are very close to the Action Research methodology in which the main purpose is the production of theoretical knowledge by improving the practice. The process was repeated during three consecutive semesters and reflection on the results which were achieved in each cycle helped enhancing the next one. As a result, a methodological procedure is proposed which consists of the definition of the Tridimensional Model as the integrating element for the contents studied in a specific academic period or semester. The teaching of Architectural Project as it is developed along the fifth academic period of the Architecture and Urbanism undergraduate program of UFRN is taken as a reference

Inserção da informática nos cursos de Arquitetura e Urbanismo do Brasil (1994 2006): diagnósticos, rebatimentos e perspectivas nas Instituições Federais de Ensino Superior do Nordeste: UFRN, UFPB e UFPE

This work supports the formalist education s improvement of the Brazilian architect and urban designer through a better application and systematization of the computer science s teaching potentialities. The research analyzes the discipline introduction in the Brazilian courses: Computer Science Applied to Architecture and Urbanism (InfoAU) in the Architecture and Urbanism Courses of Brazil (CAUs). It goes since the discipline was obligated by the MEC s Regulation nr. 1.770 from 1994 until the CNE/CES Resolution nr. 6 from 2006; it comprehends the discipline implantation, development and current context, in order to get more detailed, the research analyses three federal universities from the Northeast of the country: UFRN, UFPB and UFPE. Once identified the historical educational needs in the CAUs, the study focus on the computer science s increasing potential as an agent of integration, communication, development and knowledge/data management. It points out new social perspectives for a better use of this tool/mechanism, which adequately structuralized and integrated, creates propitious educational and professional performance/recycling conditions and a propeller instrument of research and extension activities. Among this work, it is suggested the aggregation of elements, which are complementary to the InfoAU discipline s reorganization, throughout a computerization s plan for the CAUs, extensive to the professional formation, generating a virtuous cycle in several activities of the academic, administrative and, research and extension s departments. Therefore, the InfoAU in the Brazilian CAUs context was analyzed; the main solutions and problems found were systemized; the possibilities of computer science s uses inside AU ware structuralized, InfoAU discipline s improvement plan was also defined, as well as strategies for the implementation of the computerization s plan for the CAUs, which would guarantee its maintenance in a continuity perspective