Simulação computacional de medidas estereológicas em estruturas de metal duro (WC-Co)

This work focuses on the creation and applications of a dynamic simulation software in order to study the hard metal structure (WC-Co). The technological ground used to increase the GPU hardware capacity was Geforce 9600 GT along with the PhysX chip created to make games more realistic. The software simulates the three-dimensional carbide structure to the shape of a cubic box where tungsten carbide (WC) are modeled as triangular prisms and truncated triangular prisms. The program was proven effective regarding checking testes, ranging from calculations of parameter measures such as the capacity to increase the number of particles simulated dynamically. It was possible to make an investigation of both the mean parameters and distributions stereological parameters used to characterize the carbide structure through cutting plans. Grounded on the cutting plans concerning the analyzed structures, we have investigated the linear intercepts, the intercepts to the area, and the perimeter section of the intercepted grains as well as the binder phase to the structure by calculating the mean value and distribution of the free path. As literature shows almost consensually that the distribution of the linear intercepts is lognormal, this suggests that the grain distribution is also lognormal. Thus, a routine was developed regarding the program which made possible a more detailed research on this issue. We have observed that it is possible, under certain values for the parameters which define the shape and size of the Prismatic grain to find out the distribution to the linear intercepts that approach the lognormal shape. Regarding a number of developed simulations, we have observed that the distribution curves of the linear and area intercepts as well as the perimeter section are consistent with studies on static computer simulation to these parameters.

Simulação computacional de medidas estereológicas em estruturas de metal duro (WC-Co)

This work focuses on the creation and applications of a dynamic simulation software in order to study the hard metal structure (WC-Co). The technological ground used to increase the GPU hardware capacity was Geforce 9600 GT along with the PhysX chip created to make games more realistic. The software simulates the three-dimensional carbide structure to the shape of a cubic box where tungsten carbide (WC) are modeled as triangular prisms and truncated triangular prisms. The program was proven effective regarding checking testes, ranging from calculations of parameter measures such as the capacity to increase the number of particles simulated dynamically. It was possible to make an investigation of both the mean parameters and distributions stereological parameters used to characterize the carbide structure through cutting plans. Grounded on the cutting plans concerning the analyzed structures, we have investigated the linear intercepts, the intercepts to the area, and the perimeter section of the intercepted grains as well as the binder phase to the structure by calculating the mean value and distribution of the free path. As literature shows almost consensually that the distribution of the linear intercepts is lognormal, this suggests that the grain distribution is also lognormal. Thus, a routine was developed regarding the program which made possible a more detailed research on this issue. We have observed that it is possible, under certain values for the parameters which define the shape and size of the Prismatic grain to find out the distribution to the linear intercepts that approach the lognormal shape. Regarding a number of developed simulations, we have observed that the distribution curves of the linear and area intercepts as well as the perimeter section are consistent with studies on static computer simulation to these parameters.

Análise do modelo de gestão implantado no Centro de Atenção Psicossocial CAPS II OESTE de 1995 a 2005, situado no distrito sanitário Oeste do município de Natal/RN, à luz da Co-gestão

This dissertation has as aim the praxis of co-management of the health service of CAPS II OESTE of Natal-RN, where health workers, family members got to materialize guidelines and principles of psychiatric Brazilian reform in real possibilities of subjectivity construction, whereas they changed social relations in daily life. The path chosen to record was from testimonials and contributions of those who meant their done. Redeeming this story from social representations of the majority of their builders was an instigating, delicate and rewarding task, emphasizing the living memory, rebuilt in a line of time which could not be found in simple documentary collections. Mainly, by knowing that service routine was intense and had as characteristic the singular mobility itself from a creation process and therefore not always its dynamic allowed adequate records. At the same time, from this occurred the field and bibliographic research which allowed the detailed information from the prior milestones and motivated to the practice here reported. The rereading of concepts in an interface with the reports of the interviewees enabled the verification that the model of mental health advocated by psychiatric reform was understood. Once noticed the presence of the beliefs and values of people in motivating energy for the progress of reform, it has gone to fetch theoretical subsidies of administrative order to understand how they saw this building and that uniqueness has been printed. The theoretical way and praxis have tracked here has allowed to analyze how occurred such a process of production and subjectivity and collectives that when organize enabled themselves for analysis and intervention, including in crisis situations. Therefore, it was revealed that ethical and multi-disciplinarity, the humanitarian sense, the coresponsibility, co-production and horizontal management were the key factors for spread from a changing protagonist. One can thus conclude that co-management from that collective has been multi-disciplinary weaving a cross

Análise estatística das emissões de CO e HC produzidas por gases da exaustão veicular oriundos de gasolina, GNV e mistura álcool/gasolina

The vehicles are the main mobile sources of carbon monoxide (CO) and unburned hydrocarbons (HC) released into the atmosphere. In the last years the increment of the fleet of vehicles in the municipal district of Natal-RN it is contributing to the increase of the emissions of those pollutants. The study consisted of a statistical analysis of the emissions of CO and HC of a composed sample for 384 vehicles with mechanization Gasoline/CNG or Alcohol/Gasoline/CNG of the municipal district of Natal-RN. The tests were accomplished in vehicles submitted to Vehicular Safety's Inspection, in the facilities of INSPETRANS, Organism of Vehicular Inspection. An partial gases analyzer allowed to measure, for each vehicle, the levels of CO and HC in two conditions of rotation of the motor (900 and 2500 rpm). The statistical analysis accomplished through the STATISTICA software revealed a sensitive reduction in the efficiency of the converters catalytic after 6 years of use with emission average it is of 0,78% of CO and 156 (ppm) of HC, Which represents approximately 4 (four) times the amount of CO and the double of HC in comparison with the newest vehicles. The result of a Student s t-test, suggests strongly that the average of the emissions of HC (152 ppm), at 900 rpm, is 40% larger than at 2500 rpm, for the motor without load. This result reveals that the efficiency of the catalytic conversion is limited kinetically in low engine speeds. The Study also ends that when comparing the emissions of CO and HC considering the influence of the fuels, it was verified that although the emissions of CO starting from CNG are 62% smaller than arising from the gasoline, there are not significant differences among the emissions of HC originating from of CNG and of the gasoline. In synthesis, the results place the current criteria of vehicular inspection, for exhaust gases, in doubt, leading the creation of emission limits of pollutant more rigorous, because the efficiency of the converters catalytic is sensibly reduced starting from 6 years of use. It is also raised the possibility of modifications in the test conditions adopted by the current norms, specifically in the speed engine, have seen that in the condition without load the largest emission indexes were registered in slow march. That fact that allows to suggest the dismissal of the tests in high speed engine, reducing the time of inspection in half and generating economy of fuel

Evaluation of the castability of a Co-Cr-Mo-W alloy varying the investing technique

O objetivo deste estudo foi comparar a fusibilidade de ligas de Co-Cr-Mo-W (Remanium 2000), Ni-Cr (Durabond) e Co-Cr-Mo (Vera-PDI), incluídas em revestimentos à base de fosfato, sílica ou utilizando uma técnica mista. Uma rede de nylon quadrada (10 X 10 mm) com 100 espaços abertos serviu de modelo para construção de padrões de cera, que foram incluídos com revestimento à base de sílica, revestimento fosfatado e técnica mista (camada de revestimento fosfatado com 2 mm de espessura + revestimento à base de sílica). Quarenta e cinco espécimes (5 para cada condição experimental) foram fundidos sob chama de gás-oxigênio e a seguir jateados com óxido de alumínio. O número de segmentos fundidos completos foi contado para obter uma percentagem designada como "valor de fusibilidade", representando a precisão da liga em reproduzir os detalhes do molde. A análise estatística por meio de ANOVA a dois critérios e teste Tukey mostrou que, comparando-se as ligas, a Remanium 2000 teve fusibilidade estaticamente semelhante (p>0,05) à da Vera PDI e inferior à da liga Durabond (p<0,05). Considerando os resultados da técnica mista, a liga Remanium 2000 teve menor valor de fusibilidade (p<0,05) que as ligas Durabond e Vera PDI, que apresentaram valores estatisticamente semelhantes entre si (p>0,05). Concluindo, a fusibilidade da liga de Co-Cr-Mo-W (Remanium 2000) foi comparável à da liga de Co-Cr (Vera PDI) e inferior à da liga de Ni-Cr alloy (Durabond). À exceção da liga Remanium 2000, a técnica de inclusão mista aumentou consideravelmente a capacidade das ligas testadas de reproduzir os detalhes do molde, quando comparada à técnica de inclusão em revestimento fosfatado. A técnica de inclusão mista representa uma alternativa para melhorar a fusibilidade de ligas de metais básicos sem afetar a qualidade superficial das peças metálicas.

Evaluation of the castability of a Co-Cr-Mo-W alloy varying the investing technique

O objetivo deste estudo foi comparar a fusibilidade de ligas de Co-Cr-Mo-W (Remanium 2000), Ni-Cr (Durabond) e Co-Cr-Mo (Vera-PDI), incluídas em revestimentos à base de fosfato, sílica ou utilizando uma técnica mista. Uma rede de nylon quadrada (10 X 10 mm) com 100 espaços abertos serviu de modelo para construção de padrões de cera, que foram incluídos com revestimento à base de sílica, revestimento fosfatado e técnica mista (camada de revestimento fosfatado com 2 mm de espessura + revestimento à base de sílica). Quarenta e cinco espécimes (5 para cada condição experimental) foram fundidos sob chama de gás-oxigênio e a seguir jateados com óxido de alumínio. O número de segmentos fundidos completos foi contado para obter uma percentagem designada como "valor de fusibilidade", representando a precisão da liga em reproduzir os detalhes do molde. A análise estatística por meio de ANOVA a dois critérios e teste Tukey mostrou que, comparando-se as ligas, a Remanium 2000 teve fusibilidade estaticamente semelhante (p>0,05) à da Vera PDI e inferior à da liga Durabond (p<0,05). Considerando os resultados da técnica mista, a liga Remanium 2000 teve menor valor de fusibilidade (p<0,05) que as ligas Durabond e Vera PDI, que apresentaram valores estatisticamente semelhantes entre si (p>0,05). Concluindo, a fusibilidade da liga de Co-Cr-Mo-W (Remanium 2000) foi comparável à da liga de Co-Cr (Vera PDI) e inferior à da liga de Ni-Cr alloy (Durabond). À exceção da liga Remanium 2000, a técnica de inclusão mista aumentou consideravelmente a capacidade das ligas testadas de reproduzir os detalhes do molde, quando comparada à técnica de inclusão em revestimento fosfatado. A técnica de inclusão mista representa uma alternativa para melhorar a fusibilidade de ligas de metais básicos sem afetar a qualidade superficial das peças metálicas.

Reserva extrativista Acaú-Goiana: tragédia comum ou decisão coletiva?

In recent years we have observed, in Brazil, the expansion of democratic spaces, providing the use of participatory management strategies in common-pool areas. However, the existence of a co-management model does not guarantee its practice, neither that it will prevent the depletion of common features characterizing the tragedy proposed by Hardin. In this work we analysed the management of Acaú-Goiana RESEX which is located in the cities of Acaú (PB) and Goiana (PE), eight years after its legal creation. We evaluated how much the users of RESEX possess information (even if non formalized) regarding the common use of area and whether they exhibit collectivist values. We used as an interpretative tool the facilitators principles of common resource management (PGRC) identified by Elinor Ostrom and the questionnaire of human values proposed by Schwartz. The human values questionnaire was applied to 240 individuals, half beneficiary and the other half non-beneficiary, only the beneficiaries were submitted to the questionnaire of PGRC. Interviews were conducted in the period of May to September 2014. We tested three hypotheses: 1) The degree of dependence from RESEX resources will play an important role on indirect knowledge of the PGRC; 2) the inclusion of individuals in a communal area (RESEX) increases collectivists values; 3) higher collectivist value rates increases knowledge of PGRC. To this end, we defined levels of socio-economic dependence of RESEX resources, knowledge of PGRC and individual values. GLM statistic analysis of mean comparison and correlation were employed. Our results showed that the knowledge on six of the seven items analyzed in the basic principles (PGRC) is still low. The extended land area and the high number of users may be exerting a detrimental effect on the development of a co-management. Contrary to expected, it was not the dependency who influenced knowledge on the PGRC, but the time spent in contact with the RESEX. This indicates that direct contact with the environment, not the dependence of it, that raises awareness about PGRC. According to our hypothesis, individuals with collectivist values showed greater knowledge of PGRC and reduced hours of work within the RESEX, indicating a greater tendency of individuals refrain their use of the common resource. Individualistic values correlated with less knowledge of a PGRC. Among the beneficiaries, individuals with higher individualistic values had higher monthly income, while among non-beneficiaries there was no such correlation, demonstrating the economic advantages of individualism (free-riding) in situations of non-private use of resources. Our data emphasize the importance of guiding the main actors in the development of a co-participatory management in the direction of the basic principles, and to develop collectivist values among users of a common good can raise awareness of these principles.