Análise da influência de superfícies refletivas nas perdas de calor de sistema térmicos

The use of reflective surfaces functioning as thermal insulator has grown significantly over the years. Reflective thermal insulator are materials that have several characteristics such as low emissivity, low absorptivity and high reflectivity in the infrared spectrum. The use of these materials has grown a lot lately, since it contains several important radioactive properties that minimize the heat loss of thermal systems and cooling systems that are used to block the heat on the roof of buildings. A system made of three surfaces of 316 stainless steel mirror was built to analyze the influence of reflective surfaces as a way to reduce the heat loss and thereby conserve the energy of a thermal system. The system was analyzed both with and without the presence of vacuum, and then compared with a system that contained glass wool between the stainless steel mirror walls, since this isolator is considered resistive and also broadly used around the world in thermal systems. The reflectivity and emissivity of the surfaces used were also measured in this experiment. A type K thermocouple was fixed on the wall of the system to obtain the temperature of the stainless steel mirror surfaces and to analyze the thermal behavior of each configuration used. The results showed an efficiency of 13% when the reflective surfaces were used to minimize the heat loss of the thermal system. However, the system with vacuum had the best outcome, a 60% efficiency. Both of these were compared to the system made of glass wool as a thermal insulator

Fatores da satisfação e fidelidade de clientes na hotelaria: um estudo sobre a percepção dos gestores de hotéis

This Master of Science Thesis deals with the perception of hotels managers about the factors affecting the loyalty and satisfaction of its customers. It is surveyed a group of managers attending a hotel industry meeting and the results of their responses are compared with three surveys on tourist satisfaction and loyalty factors in Natal, Brazil, including international, national and regional tourist. The main findings suggest a divergence on the managers perception and the customer significant factors affecting satisfaction surveyed, but a certain convergence on the factors affecting loyalty. The research suggest a need for a customer satisfaction and loyalty measurement system in order to contribute for the alignment of managers perception and its customers evaluations

Análise térmica e mecânica de um compósito de matriz cerâmica com carga de EPS e raspa de pneu para construção de casas populares

Space Science was built using a composite made of plaster, EPS, shredded tires, cement and water. Studies were conducted to thermal and mechanical resistance. Inside the mold EPS plates were placed in order to obtain a higher thermal resistance on the wall constructed, as well as to give it an end environmentally friendly in view of both the tire and the EPS occupy a large space in landfills and year need to be degraded when released into the environment. Compression tests were performed according to ABNT blocks to seal, measurements of the temperature variation in the external and internal walls using a laser thermometer and check the temperature of the indoor environment using a thermocouple attached to a digital thermometer. The experiments demonstrated the heat provided by the composite values from the temperature difference between the internal and external surfaces on the walls, reaching levels of 12.4 ° C and room temperature in the interior space of the Science of 33.3 ° C, remaining within the zone thermal comfort for hot climate countries. It was also demonstrated the proper mechanical strength of such a composite for sealing walls. The proposed use of the composite can contribute to reducing the extreme housing shortage in our country, producing popular homes at low cost and with little time to work

Ensino por investigação: contribuições de um curso de formação continuada para a prática de professores de ciências naturais e biologia

Normally initial teacher training has not been sufficient to provide all the tools for an updated and efficient teaching practice. It is presented here one of the ways of working the completion of the initial training through a course of continuing education. This course is based on inquiry teaching which is considered an important teaching strategy for science education. This kind of teaching enables improvement of students reasoning and cognitive skills, the cooperation among them, the understanding of the nature of scientific work, and the motivation to think about the relationship between science, technology, society and environment. For this dissertation a course of continuing education based on this approach was followed in order to evaluate which contributions it can bring to the teaching practice. The course was followed based on three stages: on the first there was a questionnaire and an informal interview; next it happened through participant observation with audio and visual aid; the third stage happened through semi structured interview. The collected information was analyzed based on Content Analysis. An inquiry teaching pedagogical material was produced for the course including some examples and applications of this approach. The aim of the material is that it can be a support for the teachers after de course. The results allowed seeing that the course was very useful, different from the traditional and the teachers that put the approach to use found it to be very positive. Thus it can be said that some of the teachers who participated will try again to apply it, try to contextualize more the teaching situations with the students day to day life, as well make them more active and critic. We can also gather from the study, that the inquiry teaching is a very different tool from what the teacher was taught and is accustomed to use and the theoretical comprehension, acceptance and practice change is a complicated process and demands time

Luís Natal ou Câmara Cascudo: o autor da cidade e o espaço como autoria

The objective of this work is to problematize a strong identification of Luís da Câmara Cascudo (1898-1986), a norte-riograndense author, to the city of Natal, analyzing the constitution of a spaciality that takes this author as this city s intellectual exponent and cultural monument, which I name as Natal cascudiana. In this sense, I investigate the process of Câmara Cascudo s monumentalization by the city of Natal, questioning the way his life has been articulated to the site of his production. Bearing this in mind, I have structured the work in three parts: on the first one, I examine the emerging of this identity relationship considering the intellectual formation of young Cascudinho and the beginnings of his literary activities, verifying the reasons that led him to remain in Natal; on the second part I investigate his appointment as Natal s historian in 1948, discussing the ways through which this intellectual function institutionalized the works of Cascudo and conferred the city with a historical knowledge of itself; and finally, I analyze the constitution of a city memory regarding Cascudo, that has transformed him into spatial marks and urban toponym: names of streets, museum, library, bookstores etc. On these terms, I deal with the biographic gender to achieve a history of the city s spaces, problematizing the monumentalization of Cascudo in Natal, interrogating the emerging of this Natal cascudiana

Remoção de nitratos em água utilizando diferentes materiais e processos

The need to preserve the environment has led to the search for new materials for efficient disposal of chemical compounds that alter the stability of our natural resources. Among these resources, stands in first place the water, as a precious commodity and scarce, leading to the proper use and reuse. As a result, the World Health Organization has established maximum permissible values in drinking water, such as: 50 mg/L, 0, 1 mg/L and 0, 5 mg/L to at-3, at-2, NH 4, respectively. For these reasons, assesses the implementation of new materials and water treatment processes aiming at the removal of these compounds, such as alumina, in the form of powder or as a support for a catalytic system using inorganic membranes capable of supporting more severe conditions of temperature and pressure by opening new possibilities for applications of membrane reactors; and also for electrochemical treatments with doped diamond bobo electrodes (BDD) as anode and copper as cathode. For such purpose, was conducted the study of adsorption of nitrate in different times to assess the time required to achieve equilibrium by employing three commercial alumina called: acidic, basic and neutral alumina, with subsequent treatment only in the acidic alumina impregnating metals (PdCu/Al2O3) for the catalytic reaction. The materials were previously characterized by XRD, SEM techniques and ABET. Aluminas presented a considerable adsortive capacity of nitrate in the first thirty minutes, equivalent to 50% of removal reaching equilibrium in that time. After treatment, using alumina as catalyst for the reaction in batch reactor (Pd-Cu/Al2O3), the results were more favourable, totalling 64% reduction of ion NO3-at the end of three hours. On the other hand, the results for the catalytic reaction using the catalytic support Pd-Cu/TiO2 in membrane reactor proved to be low. -if, in this way, improve the conditions of catalytic system to optimize the process. Already, for the electrochemical tests using DDB1 electrodes as anode, and Cu, as cathode, there was a fairly significant nitrate reduction, approximately 80% of ion removal during three hours and cost viable applications.