15 resultados para Termo topológico de Chern-Simons

em Universidade Federal do Rio Grande do Norte(UFRN)


Relevância:

20.00% 20.00%

Publicador:

Resumo:

The cells unitaria of the solid oxide fuel cell are separated by means of interconnects, which serve as electrical contact between the cells. Lanthanum Chromite (LaCrO3) has been the most common material used as interconnect in solid oxide fuel cells. Reducing the operating temperature around 800 º C of cells to solid oxide fuel make possibilite the use of metallic interconnects as an alternative to ceramic LaCrO3. Metallic interconnects have advantages over ceramic interconnects such as high thermal conductivity, electricity, good ductility, low cost, good physical and mechanical properties. In this work evaluate the thermo-mechanical properties of the metallic substrate and coated metallic substrate with the ceramic LaCrO3 film via spray-pyrolysis, in order to demonstrate the feasibility of using this material as a component of a fuel cell solid oxide. The materials were characterized by X-ray diffraction, oxidation behavior, mechanical strength, optical microscopy (OM) and scanning electron microscopy (SEM). The X-ray diffraction proved the formation phase of the LaCrO3 on the metallic substrate and the identification of the phases formed after the oxidative test and mechanical strength at high temperature. The oxidation behavior showed the increased oxidation resistance of the coated metallic substrate. It was noted that the mechanical resistance to bending of the coated metallic substrate only increases at room temperature. The optical microscopy (OM) has provided an assessment of both the metallic substrate and the LaCrO3 film deposited on the metal substrate that, in comparison with the micrographs obtained from SEM. The SEM one proved the formation of Cr2O3 layer on the metallic substrate and stability of LaCrO3 film after oxidative test, it can also observe the displacement of the ceramic LaCrO3 film after of mechanical testing and mapping of the main elements as chromium, manganese, oxygen, lanthanum in samples after the thermo-mechanical tests.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Doped lanthanum chromite ( LaCrO3 ) has been the most common material used as interconnect in solid oxide fuel cells for high temperature ( SOFC-HT ) that enabling the stack of SOFCs. The reduction of the operating temperature, to around 800 º C, of solid oxide fuel cells enabled the use of metallic interconnects as an alternative to ceramic LaCrO3, From the practical point of view, to be a strong candidate for interconnect the material must have good physical and mechanical properties such as resistance to oxidizing and reducing environments, easy manufacture and appropriate thermo-mechanical properties. Thus, a study on the physic-mechanical interconnects La0,8Sr0,2Cr0,92Co0,08O3 ceramics for SOFC -AT obtained by the method of combustion , as well as thermo-mechanical properties of metallic interconnects (AISI 444) covered with La0,8Ca0,2CrO3 by deposition technique by spray-pyrolysis fuel cells for intermediate temperature (IT-SOFCs). The La0,8Sr0,2Cr0,92Co0,08O3 was characterized by X -ray diffraction(XRD) , density and porosity , Vickers hardness (HV) , the flexural strength at room temperature and 900 °C and scanning electron microscopy (SEM). The X -ray diffraction confirmed the phase formation and LaCrO3 and CoCr2O4, in order 6 GPa hardness and mechanical strength at room temperature was 62 MPa ceramic Interconnector. The coated metal interconnects La0,8Ca0,2CrO3 passed the identification by XRD after deposition of the film after the oxidation test. The oxidative behavior showed increased resistance to oxidation of the metal substrate covered by La0,8Ca0,2CrO3 In flexural strength of the coated metal substrate, it was noticed only in the increased room temperature. The a SEM analysis proved the formation of Cr2O3 and (Cr,Mn)3O4 layers on metal substrate and confirmed the stability of the ceramic La0,8 Ca0,2CrO3 film after oxidative test

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This study compared the evolution of posture, tone and neonatal reflexes in preterm infants without clinical or neurological complications before and after the age of term using the scale of Saint-Anne Dargassies. To reach the age of the term, was applied Scales Amiel-Barrier-Shnider changed and the Prechtl, traditionally used in the evaluation of term newborns, looking for possible changes to the term, while also evaluating the sensitivity of these scales. We studied 20 non-complicated preterm infants, both sexes aged 32-36 weeks, born in Januário Cicco Maternity School, from August 2006 to August 2007. Was applied to the scale of Saint-Anne Dargassies every two weeks until reach the term, and the range of Amiel-Barrier-Shnider changed and the Prechtl, after reaching 39 and 41 weeks. The evaluation result of articular angles was subjected to the test of Friedman ANOVA, significant differences between the three measurements of the scale of Saint-Anne Dargassies only for angles heel-to-ear to term. Neonatal reflexes changed in the period of prematurity were the cardinal points reflexes, Moro reflexes, cross extensions reflex and the automatic walking reflexes. The posture was the parameter which remained unchanged in the three scales. Considering a significance level of 5% by applying Cochran Q Test, it was found that the scale of Saint-Anne Dargassies is more sensitive to detect suspects. With this methodology and the results it was possible to prepare a manuscript: The neurological examination of non-complicated preterm newborns using the Sanit-Anne Dargssies Scale from birth to term: normal or altered? In which we describe that despite the good clinical condition, the RNP show changes in tone and neonatal reflexes. These data are important because though non-complicated RNP need further attention its maturation process, enabling us to detect and intervene early. With these results we can build a scale simplified neurological assessment made with items found most altered during the application of three scales. The development of this project has a multidisciplinary approach, because it involved Paediatric Neurologist, Physiotherapist and Neonatologist, as recommended by PPGCSA

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This work proposes a formulation for optimization of 2D-structure layouts submitted to mechanic and thermal shipments and applied an h-adaptive filter process which conduced to computational low spend and high definition structural layouts. The main goal of the formulation is to minimize the structure mass submitted to an effective state of stress of von Mises, with stability and lateral restriction variants. A criterion of global measurement was used for intents a parametric condition of stress fields. To avoid singularity problems was considerate a release on the stress restriction. On the optimization was used a material approach where the homogenized constructive equation was function of the material relative density. The intermediary density effective properties were represented for a SIMP-type artificial model. The problem was simplified by use of the method of finite elements of Galerkin using triangles with linear Lagrangian basis. On the solution of the optimization problem, was applied the augmented Lagrangian Method, that consists on minimum problem sequence solution with box-type restrictions, resolved by a 2nd orderprojection method which uses the method of the quasi-Newton without memory, during the problem process solution. This process reduces computational expends showing be more effective and solid. The results materialize more refined layouts with accurate topologic and shape of structure definitions. On the other hand formulation of mass minimization with global stress criterion provides to modeling ready structural layouts, with violation of the criterion of homogeneous distributed stress

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This paper discusses aspects of the slavery and emancipations in the village of Arez between the last quarter of the eighteenth century and the first decades of the nineteenth century. It seeks to identify the profile of the slaves and the emancipation possibilities in a peripheral region with few commercial activities, given that the most of the approaches about manumission consider towns and cities where the economic dynamics ware more pronounced, as places of higher possibilities of slaves working in diverse activities that allowed them to accumulate a reserve fund and thus buy their freedom. Therefore it was necessary to raise evidences of slavery in the case study, which was based on surveys of the eighteenth century, and the first decades of the nineteenth century and some population maps and civil records related to the early nineteenth century. The information about the manumission acts were analyzed based on writs of freedom registered in the village of Arez between 1774 and 1827 due to the absence of other documents about it. The registry books include all the documents of the Arez community; so, it was possible to observe what happened in rural localities, in the town, in the headquarters of the district and in the village of Goianinha. Based on information from the documents, it was possible to address some aspects of slavery like the predominant types of groups, the possible activities in which slaves were inserted and the profile of the freed slaves, the emancipation modes and, therefore, discuss the possible relations ship between the colonial space and manumissions and between masters and slaves

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Social support is an important factor throughout one s life, especially in times of crisis. Premature delivery can be considered a crisis, followed by neonatal hospitalization. This type of birth is associated with elevated anxiety, representing risks to maternal mental health and mother-infant relationship. This research aims to investigate whether a relationship exists between perceived social support and the expression of anxiety in mothers of premature, hospitalized newborns. This is a cross-sectional, correlational study, conducted during the period of April to October 2011, using a convenience sample. The sample consisted of seventy mothers with preterm, hospitalized newborns and seventy mothers of full-term newborns. The instruments used were the State-Trait Anxiety Inventory and the Social Support Scale. The results demonstrated a weak negative relationship between intensity-State Anxiety and emotional support as well as a negative relationship in intensity between low to moderate-Trait Anxiety, social support and its dimensions (material support, emotional, information, interaction positive social and emotional). These suggest that the better the perception of social support, the less severe anxiogenic symptoms will be, and the converse is also true. It is noteworthy, therefore, the importance of social support, as well as the importance of health professionals to be aware not only of the physical health of the newborn, but also the psychosocial aspects that pervade the context of preterm birth followed by hospitalization

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Vitamin A is an essential nutrient for many physiological processes such as growth and development, so that their adequate nutritional state is essential during pregnancy and lactation. Lactating women and children in breastfeeding are considered risk groups for vitamin A deficiency and some factors may increase the risk of vitamin A deficiency, such as prematurity. The aim of this work was to evaluate the vitamin A concentration in preterm and term lactating women and newborns by determination of retinol in maternal serum, umbilical cord serum and breast milk collected until 72 hours postpartum. 182 mothers were recruited and divided into preterm group (GPT; n = 118) and term group (GT, n = 64). In preterm group were also analyzed transition milk (7th-15th day; n = 68) and mature milk (30th-55th day; n = 46) samples. Retinol was analyzed by high-performance liquid chromatography (HPLC). Maternal retinol concentration in serum was 48.6 ± 12.3 µg/dL in GPT and 42.8 ± 16.3 µg/dL in the GT (p <0.01). Cord serum retinol was 20.4 ± 7.4 µg/dL in GPT and 23.2 ± 7.6 µg/dL in GT (p> 0.05). Among newborns, 43% of premature and 36% of term had low levels of serum retinol in umbilical cord (<20 µg/dL). In colostrum, the retinol in preterm and term groups had an average of 100.8 ± 49.0 µg/dL and 127.5 ± 65.1 µg/dL, respectively (p <0.05). The retinol average in preterm milk increased to 112.5 ± 49.7 µg/dL in transition phase and decreased to 57.2 ± 23.4 µg/dL in mature milk, differing significantly in all stages (p <0.05). When comparing with the recommendation of vitamin A intake (400 µg/day) GT colostrum reached the recommendation for infants, but in GPT the recommendation was not achieved at any stage. Mothers of premature infants had higher serum retinol than mothers at term; however, this was not reflected in serum retinol of umbilical cord, since premature had lower concentration of retinol. Such condition can be explained due to lower maternal physiological hemodilution and placental transfer of retinol to the fetus during preterm gestation. Comparison of retinol in colostrum showed lower concentrations in GPT; however the transition phase there was a significant increase of retinol content released by the mammary gland of preterm mothers. This situation highlights a specific physiological adaptation of prematurity, likely to more contribute to formation of hepatic reserves of retinol in premature infants.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The birth or delivery under 37 weeks of pregnancy is considered a global public health problem, since it is seen as one of the main risk factors for neonatal morbidity and mortality, particularly in the first week of life. This study had the objective of analyzing the profile of mothers of premature and full-term babies for the outcome of birth. This is an analytical-descriptive and cross-sectional study, with a sample of 109 mothers of all the premature babies and 135 mothers of the randomly selected full-term babies, by drawing, occurred in the period from April to September 2015, in a public maternity. Data were organized on Microsoft Excel 2013; subsequently, there was the analysis of the analytical-descriptive statistics, through Statistica 10, through which the frequencies, proportions, p values, with 5% significance level, through the Chi-square test, were identified. The project was submitted to the Research Ethics Committee of the Federal University of Rio Grande do Norte, receiving a favorable opinion (nº 1047431/2015). This study has enabled us to identify that the socioeconomic profile of mothers of premature and full-term babies showed, in both, low schooling level and low income. In addition, our data point out in the two groups, before and during pregnancy, a high prevalence of sedentariness; statistical significance for overweight and obesity before and during pregnancy, with 42,22% prevalence before pregnancy of mothers of premature babies and 48,62% of mothers of full-term babies; with high blood pressure during pregnancy in 32,11% of mothers of premature babies and 17,04% of mothers of full-term babies. Moreover, pregnancy was only planned in 33,33%, and also unwanted by 21,1% of mothers of premature babies, while 40,37% of mothers of full-term babies planned pregnancy and 17,78% had unwanted pregnancy. With respect to the aggravating factor “illicit drugs”, there was consumption during pregnancy on the part of 8,26% of mothers of premature babies. The most frequent complications were: vaginal bleeding (in 43,12% of mothers of premature babies and 20% of mothers of full-term babies); urinary infection (in 44,95% of mothers of premature babies and 40% of mothers of full-term babies); and stressful pregnancy (in 62,96% of mothers of premature babies and 47,41% of mothers of full-term babies). Accordingly, babies were born with health problems in 58,10% of premature births and there was healthy birth in 96,30% of full-term babies. Therefore, the profile of mothers with obesity and overweight, unwanted pregnancy, user of illegal drugs during pregnancy, stressful pregnancy and vaginal bleeding may be associated with the birth of premature baby as unfavorable and hazardous event for the child’s health.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The birth or delivery under 37 weeks of pregnancy is considered a global public health problem, since it is seen as one of the main risk factors for neonatal morbidity and mortality, particularly in the first week of life. This study had the objective of analyzing the profile of mothers of premature and full-term babies for the outcome of birth. This is an analytical-descriptive and cross-sectional study, with a sample of 109 mothers of all the premature babies and 135 mothers of the randomly selected full-term babies, by drawing, occurred in the period from April to September 2015, in a public maternity. Data were organized on Microsoft Excel 2013; subsequently, there was the analysis of the analytical-descriptive statistics, through Statistica 10, through which the frequencies, proportions, p values, with 5% significance level, through the Chi-square test, were identified. The project was submitted to the Research Ethics Committee of the Federal University of Rio Grande do Norte, receiving a favorable opinion (nº 1047431/2015). This study has enabled us to identify that the socioeconomic profile of mothers of premature and full-term babies showed, in both, low schooling level and low income. In addition, our data point out in the two groups, before and during pregnancy, a high prevalence of sedentariness; statistical significance for overweight and obesity before and during pregnancy, with 42,22% prevalence before pregnancy of mothers of premature babies and 48,62% of mothers of full-term babies; with high blood pressure during pregnancy in 32,11% of mothers of premature babies and 17,04% of mothers of full-term babies. Moreover, pregnancy was only planned in 33,33%, and also unwanted by 21,1% of mothers of premature babies, while 40,37% of mothers of full-term babies planned pregnancy and 17,78% had unwanted pregnancy. With respect to the aggravating factor “illicit drugs”, there was consumption during pregnancy on the part of 8,26% of mothers of premature babies. The most frequent complications were: vaginal bleeding (in 43,12% of mothers of premature babies and 20% of mothers of full-term babies); urinary infection (in 44,95% of mothers of premature babies and 40% of mothers of full-term babies); and stressful pregnancy (in 62,96% of mothers of premature babies and 47,41% of mothers of full-term babies). Accordingly, babies were born with health problems in 58,10% of premature births and there was healthy birth in 96,30% of full-term babies. Therefore, the profile of mothers with obesity and overweight, unwanted pregnancy, user of illegal drugs during pregnancy, stressful pregnancy and vaginal bleeding may be associated with the birth of premature baby as unfavorable and hazardous event for the child’s health.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Este trabalho visa analisar o potencial do sombreamento vegetal no edifício para promover conforto térmico, luminoso e eficiência energética, a partir de simulações computacionais nos softwares DesignBuilder e Daysim. Foram simuladas diferentes combinações de fator de céu visível (FCV), transparência da copa vegetal e percentual de abertura da fachada (PAF) para edificação residencial térrea em Nata/RN, a fim de quantificar os impactos e propor recomendações projetuais. Os modelos foram analisados por meio do método de conforto adaptativo indicado pela ASHRAE Standard 55 (ASHRAE, 2010), classificação do nível de eficiência energética do Regulamento Técnico da Qualidade para o Nível de Eficiência Energética de Edificações Residenciais (RTQ-R), resultados de Daylight autonomy (DA) e uniformidade da luz natural para as exigências lumínicas de 100-300-500 lux. Os resultados demonstram grande potencial para integração da vegetação na edificação, principalmente para os fatores de céu médio e grande, e falta de coerência do RTQ-R para classificar as edificações da Zona bioclimática 08 pelo método de simulação.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Este trabalho visa analisar o potencial do sombreamento vegetal no edifício para promover conforto térmico, luminoso e eficiência energética, a partir de simulações computacionais nos softwares DesignBuilder e Daysim. Foram simuladas diferentes combinações de fator de céu visível (FCV), transparência da copa vegetal e percentual de abertura da fachada (PAF) para edificação residencial térrea em Nata/RN, a fim de quantificar os impactos e propor recomendações projetuais. Os modelos foram analisados por meio do método de conforto adaptativo indicado pela ASHRAE Standard 55 (ASHRAE, 2010), classificação do nível de eficiência energética do Regulamento Técnico da Qualidade para o Nível de Eficiência Energética de Edificações Residenciais (RTQ-R), resultados de Daylight autonomy (DA) e uniformidade da luz natural para as exigências lumínicas de 100-300-500 lux. Os resultados demonstram grande potencial para integração da vegetação na edificação, principalmente para os fatores de céu médio e grande, e falta de coerência do RTQ-R para classificar as edificações da Zona bioclimática 08 pelo método de simulação.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The cells unitaria of the solid oxide fuel cell are separated by means of interconnects, which serve as electrical contact between the cells. Lanthanum Chromite (LaCrO3) has been the most common material used as interconnect in solid oxide fuel cells. Reducing the operating temperature around 800 º C of cells to solid oxide fuel make possibilite the use of metallic interconnects as an alternative to ceramic LaCrO3. Metallic interconnects have advantages over ceramic interconnects such as high thermal conductivity, electricity, good ductility, low cost, good physical and mechanical properties. In this work evaluate the thermo-mechanical properties of the metallic substrate and coated metallic substrate with the ceramic LaCrO3 film via spray-pyrolysis, in order to demonstrate the feasibility of using this material as a component of a fuel cell solid oxide. The materials were characterized by X-ray diffraction, oxidation behavior, mechanical strength, optical microscopy (OM) and scanning electron microscopy (SEM). The X-ray diffraction proved the formation phase of the LaCrO3 on the metallic substrate and the identification of the phases formed after the oxidative test and mechanical strength at high temperature. The oxidation behavior showed the increased oxidation resistance of the coated metallic substrate. It was noted that the mechanical resistance to bending of the coated metallic substrate only increases at room temperature. The optical microscopy (OM) has provided an assessment of both the metallic substrate and the LaCrO3 film deposited on the metal substrate that, in comparison with the micrographs obtained from SEM. The SEM one proved the formation of Cr2O3 layer on the metallic substrate and stability of LaCrO3 film after oxidative test, it can also observe the displacement of the ceramic LaCrO3 film after of mechanical testing and mapping of the main elements as chromium, manganese, oxygen, lanthanum in samples after the thermo-mechanical tests.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Doped lanthanum chromite ( LaCrO3 ) has been the most common material used as interconnect in solid oxide fuel cells for high temperature ( SOFC-HT ) that enabling the stack of SOFCs. The reduction of the operating temperature, to around 800 º C, of solid oxide fuel cells enabled the use of metallic interconnects as an alternative to ceramic LaCrO3, From the practical point of view, to be a strong candidate for interconnect the material must have good physical and mechanical properties such as resistance to oxidizing and reducing environments, easy manufacture and appropriate thermo-mechanical properties. Thus, a study on the physic-mechanical interconnects La0,8Sr0,2Cr0,92Co0,08O3 ceramics for SOFC -AT obtained by the method of combustion , as well as thermo-mechanical properties of metallic interconnects (AISI 444) covered with La0,8Ca0,2CrO3 by deposition technique by spray-pyrolysis fuel cells for intermediate temperature (IT-SOFCs). The La0,8Sr0,2Cr0,92Co0,08O3 was characterized by X -ray diffraction(XRD) , density and porosity , Vickers hardness (HV) , the flexural strength at room temperature and 900 °C and scanning electron microscopy (SEM). The X -ray diffraction confirmed the phase formation and LaCrO3 and CoCr2O4, in order 6 GPa hardness and mechanical strength at room temperature was 62 MPa ceramic Interconnector. The coated metal interconnects La0,8Ca0,2CrO3 passed the identification by XRD after deposition of the film after the oxidation test. The oxidative behavior showed increased resistance to oxidation of the metal substrate covered by La0,8Ca0,2CrO3 In flexural strength of the coated metal substrate, it was noticed only in the increased room temperature. The a SEM analysis proved the formation of Cr2O3 and (Cr,Mn)3O4 layers on metal substrate and confirmed the stability of the ceramic La0,8 Ca0,2CrO3 film after oxidative test