16 resultados para Substituído
em Universidade Federal do Rio Grande do Norte(UFRN)
Resumo:
Cementation operation consists in an extremely important work for the phases of perforation and completion of oil wells, causing a great impact on the well productivity. Several problems can occur with the cement during the primary cementation, as well as throughout the productive period. The corrective operations are frequent, but they are expensive and demands production time. Besides the direct cost, prejudices from the interruption of oil and gas production till the implementation of a corrective operation must be also taken into account. The purpose of this work is the development of an alternative cement paste constituted of Portland cement and porcelainized stoneware residue produced by ceramic industry in order to achieve characteristics as low permeability, high tenacity, and high mechanical resistance, capable of supporting various operations as production or oil wells recuperation. Four different concentration measures of hydrated paste were evaluated: a reference paste, and three additional ones with ceramic residue in concentrations of the order of 10%, 20% and 30% in relation to cement dough. High resistance and low permeability were found in high concentration of residues, as well as it was proved the pozolanic reactivity of the residue in relation to Portland cement, which was characterized through x-ray and thermogravimetry assays. It was evident the decrease of calcium hydroxide content, once it was substituted by formation of new hydrated products as it was added ceramic residue
Resumo:
Water injection is the most widely used method for supplementary recovery in many oil fields due to various reasons, like the fact that water is an effective displacing agent of low viscosity oils, the water injection projects are relatively simple to establish and the water availability at a relatively low cost. For design of water injection projects is necessary to do reservoir studies in order to define the various parameters needed to increase the effectiveness of the method. For this kind of study can be used several mathematical models classified into two general categories: analytical or numerical. The present work aims to do a comparative analysis between the results presented by flow lines simulator and conventional finite differences simulator; both types of simulators are based on numerical methods designed to model light oil reservoirs subjected to water injection. Therefore, it was defined two reservoir models: the first one was a heterogeneous model whose petrophysical properties vary along the reservoir and the other one was created using average petrophysical properties obtained from the first model. Comparisons were done considering that the results of these two models were always in the same operational conditions. Then some rock and fluid parameters have been changed in both models and again the results were compared. From the factorial design, that was done to study the sensitivity analysis of reservoir parameters, a few cases were chosen to study the role of water injection rate and the vertical position of wells perforations in production forecast. It was observed that the results from the two simulators are quite similar in most of the cases; differences were found only in those cases where there was an increase in gas solubility ratio of the model. Thus, it was concluded that in flow simulation of reservoirs analogous of those now studied, mainly when the gas solubility ratio is low, the conventional finite differences simulator may be replaced by flow lines simulator the production forecast is compatible but the computational processing time is lower.
Resumo:
The production of synthesis gas has received renewed attention due to demand for renewable energies to reduce the emissions of gases responsible for enhanced greenhouse effect. This work was carried out in order to synthesize, characterize and evaluate the implementation of nickel catalysts on MCM-41 in dry reforming reactions of methane. The mesoporous molecular sieves were synthesized using as silica sources the tetraethyl orthosilicate (TEOS) and residual glass powder (PV). The sieves were impregnated with 10% nickel to obtain the metallic catalysts (Ni/MCM-41). These materials were calcined and characterized by Thermogravimetric Analysis (TG), Infrared spectroscopy (FTIR), X-ray Diffraction (XRD), Temperature-Programmed Reduction (TPR) and N2 Adsorption/Desorption isotherms (BET/BJH). The catalytic properties of the samples were evaluated in methane dry reforming with CO2 in order to produce synthesis gas to be used in the petrochemical industry. The materials characterized showed hexagonal structure characteristic of mesoporous material MCM-41 type, being maintained after impregnation with nickel. The samples presented variations in the specific surface area, average volume and diameter of pores based on the type of interaction between the nickel and the mesoporous support. The result of the the catalytic tests showed conversions about 91% CO2, 86% CH4, yelds about 85% CO and 81% H2 to Ni/MCM-41_TEOS_C, and conversions about 87% CO2, 82% CH4, yelds about 70% CO and 59% H2 to Ni/MCM-41_PV_C. The similar performance confirms that the TEOS can be replaced by a less noble materials
Resumo:
This thesis addresses the development of technoscience in times of transnational globalization and highlights the vulnerability of the discourse of social progress, which may be replaced by evidence of social risk before the artificiality of nature and humanity. That demands an ethical and legal responses to events that impose the necessity of an ethical control in biotechnology research involving human beings contributing to the rise of Bioethics and Biolaw as fields of knowledge. This theme is studied from a multidisciplinary perspective seeking a dynamic dimension in the interpretation of research data reconnecting Social Sciences to Legal Sciences (Biolaw) and to Philosophy (Bioethics), in order to obtain answers to the problems posed. The objective delimited is to examine the interfaces between Biolaw and Bioethics, in order to observe the confluence of these areas of knowledge. Biolaw is considered as a new legal branch derived from the paradigmatic transition of Law and wonders how it will stand before questions resulting of social transformations caused by biotechnological development that endangers humans and society. It is concluded that the relationship between Bioethics and Biolaw is recursive and inseparable and it contributed to the "unthink" of traditional legal model of linear view/reductionist allowing that the "certainties" will be replaced by "possibilities", which comes to enable Biolaw to confront the issues caused by the development of biotechnology that violates physically and morally the human person. It is perceived, therefore, that Biolaw is driven and aided by bioethical reflections and it positions itself before the dilemmas caused by biotechnology in creating, interpreting and applying coercive rules which aims to protect the human being, his offspring and society
Resumo:
Among the waste generated in the petrochemical industry water associated with oil production is the most important. It is considered one of the great challenges due to the presence of considered toxic chemicals present in this composition. The presence of these substances difficult to reuse the water associated with the enhanced recovery processes, so that prior to their reuse or disposal, treatment is necessary. This paper aimed to study the removal efficiency of chemical species: Ba2+, Ni2+, Cd2+, Cu2+, Cr3+, Sr2+ and Zn2+, present in the composition of the water associated with oil production by electrocoagulation. The evaluation of removal of these chemical species was performed by laboratory tests using electrochemical batch reactors and continuous flow. Initial tests were performed with electrocoagulation of synthetic wastewater in batch reactor using iron electrode. Results of removal of Zn2+ and Ni2+ were 78 % and 59 % respectively. While the percentage of removed Ba2+ was 19 % by 30 minutes of treatment and by applying current of 1.10 A. The tests were performed on effluent batch reactor applying the electrochemical technique with stainless steel electrodes 304, the objective was to remove part of the dispersed oil and also of organic compounds in the effluent. Under the experimental conditions used, the maximum result was obtained TOG was 60 % and TOC was approximately 50 % compared to the initial concentration. In the experiments carried out in continuous reactor, with effluent semisynthetic, have been used electrodes of iron and aluminum and the results were 100 % removal of Cd2+, Cu2+, Cr3+ and Zn2+ and 77 % of Sr2+. These percentages were only attainable through the use of the iron electrode. However, when the electrode was replaced by aluminum, there was a reduction in the percentage of removal to 65 %, using the same flow rate and current. Therefore according to the results obtained using the iron electrode was more effective in removing these metals and the conditions of lower current and lower flow rate was satisfactory, as observed in the experimental design adopted
Tecnologia mais limpa para produção de mel seco de cana e sua inclusão em rações de frangos de corte
Resumo:
This study analyzed the effects of adding dry sugar cane molasses (MSC) to the feed of broiler chickens, and determining the economic feasibility of use of this type of diet; 240 male Ross race broiler chickens, one day in age, were utilized in this study. The experimental desing was a completely randomized whit 6 treatments and 4 replications, in 24 portions of 10 birds per parcel. The treatments corresponded to 6 rations (T1-T6) in phase initial (1-21 days) and 6 rations (T1-T6) in phasem finish (22-42 days) characterized by substitution of corn meal in levels increase 0, 5, 10, 15, 20 e 25% by the molasse dried sugar-cane. The birds received water and free ration during the whole creation phase, being the iso-proteins and iso-calories rations. The variance analysis showed the 1 a 21 days significant differences for average gain weight (P<0,05), average consumption of ration (P<0,05) and average alimentary conversion (P<0,05) and the 22 a 42 days, the analysis of variance showed significant differences for gain in weight (P<0,01) and average alimentary conversion (P<0,05). There no difference significant on average consumption of ration (P>0,05) the 22 a 42 days of age. Results showed out that is possible to use molasse dried sugar-cane up to 8,3 % in broilers ration. It was concluded the level of 8,3 % of addition gave the best economical returns in the experimental conditions
Resumo:
As a professor in Curso de Licenciatura em Letras, from Campus Avançado Profa Maria Eliza Albuquerque Maia (CAMEAM),do Estado do Estado do Rio Grande do Norte (UERN), in the town of Pau do Ferros, in the state of Rio Grande do Norte, we had the chance to carry out several writing activities , as well as guiding re-writing activities for the texts produced. From this experience, we started looking at the need of reflecting upon the writing process in higher education. Thus, we aim at analyzing, in this research, the methodology used in the moment of carrying out the writing practices activities in higher education, investigating, in particular, the rewriting practices, concerning the operations used for carrying out such activities, as well as the sense effects produced from the alterations which were made in the texts. Our theoretical foundation is grounded on a conception of text as a verbal action , what reveals a socio-interactional view of the language (MARCUSCHI, 2008; SAUTCHUK, 2003). As the production of written texts, our research focus, we assume that, for this activity, we deal with distinct figures (active writer and internal reader), so that we can, apart from writing, reflecting upon our writing and, this way, deciding about operations which are carried out to make the alterations which are necessary to the rewriting of our texts (SAUTCHUK, 2003). Still about the theoretical foundations used in this research, we made use of the theories from the Textual Analysis of Discourse (TAD) which discusses the belief on the evidence on the existence of the texts, which is opposite to the fixist view of textuality which believes that the texts exist by themselves. (ADAM, 2008; [2005]2010). Under this perspective, we have also adopted, the concepts which come from genetics criticism which is concerned about the relation between text and genesis, using as objects documents which bring traits of the text in progress, on the ground that the text is the result of work in progress, and the writing practice, on the other hand, as an activity in a continuous movement (HAY, [1975]2002; DE BIASI, [2000]2010; GRÉSILLON, 1989; [1990]2008; [1992]2002; SALLES, 2008a). The methodology in this research is an ethnography-based one, an approach which focuses on the process, as well as is meaning-based. To understand the objectives proposed in our research, we made use of different procedures of collecting data which include an ethnographic study, such as: observation, note-taking, document analysis. The data which were analyzed were collected during the semester of 2008.2, in a first term classroom of Curso de Letras from CAMEAM, when we were able to collect twenty-one written texts and all of them were rewritten based on rewriting activities, what provides a corpus of forty-two texts which will be analyzed based on the linguistics operations identified by Generative Grammar and adopted by Lebrave and Grésillon (2009). From these analyses, we were able to confirm that writing is a process, and rewriting has become an extremely important activity for this process. Still due to these data, we observed that substitution was the most used operation by text authors. We believe that this result is justified by the fact that the substitution, according to what proposes the Genetic Criticism, constitutes the source of all erasure, from which one can easily make a change in writing. Regarding the operations of addition and deletion, we found that they were used in quantitative terms, almost equivalently, which can be explained when we see that the two operations require, by the author of the text, different strategies from those used for the replacement, what includes , respectively, adding or removing a segment. Finally, we found out that the shift operation was the least used, since it works with a segment that will not be replaced, added or deleted, but transferred to another place of text, which requires a greater ability of the author to perform this operation and not compromising the meaning of his/her writing. As a result, we hope to contribute to the reflection on the teaching of writing, considering, in a particular way, those with a Bachelor in Arts. Our analysis will contribute to the teaching of Portuguese language, specifically for activities that guide the production of texts in order to explore with students the ability to rewrite their own text
Resumo:
Cette thèse a pour objectif principal examiner comment les Mênon, Platon listes l'anámnesis avec les autres théories qui sont abordés dans ce dialogue et, par conséquent, essayer de comprendre ce que c'est. Cette recherche vise dans un premier temps situées dans d'autres dialogues de Platon la survenance du terme anamnésis à veifique les points qui relient ces oeuvres à clarifier la compréhension d'un plus approprié dans le Mênon. Jetez-y aussi, quels sont les éléments de la platonicienne théorie de la connaissance sera reliant le dialogue afin de prouver que le Mênon, qui est la question centrale areté, garde un conflit dans la sophistique et la philosophie. Ce choc entre ce qui se passe papapep indirectement par l'intermédiaire de son Mênon enseigné, et Socrates qui conteste la thèse de l'éthique et le relativisme épistémologique. Nous voyons aussi, de quelle manière le dialogue est donnée de prendre une voie d'accès au savoir qui est configuré comme sûrs, à savoir anámnésis. L'interrogatoire de Mênon depuis le début dans les appels d'enquêter éristique cet intérêt, que lorsqu'ils sont confrontés à des intérêts les amènerait à l'état aporétique initial et qui est progressivement remplacé par l'aporie fondamental de connaissance, ce n'est point pour aporie la compréhension de anámnesis. En prenant la dialectique comme méthode d'enquête dans le dialogue, il est nécessaire de la part de Socrates et Mênon, de quitter le didaskein et en profiter pour mathésis que la construction des connaissances. Il ouvre de manière un des principaux enjeux dans ce travail examine si le anámnesis permettre l'accès aux moyens et si elle a un statut similaire à mnéme. À un moment où Socrate explique dans le dialogue qui est le anámnesis par monstration monstration fait avec esclave de Mênon il est l'utilisation d'éléments mythiques que, selon notre analyse, permettre à comprendre le sens de dialogue les connaissances qui montre l'opportunité d'apprendre, qui est la anámnesis
Resumo:
Cerebrovascular accident (CVA) is a term used to characterize an ischemic or hemorrhagic vascular injury, which has got as main clinic manifestations, the motor and reflex function disturbance. In the first stage there is flaccidity and loss of voluntary movements that afterwards is substituted by mass patterns and spasticity. The spasticity brings with itself functional deficits and can generate negative impacts in various motor patterns. The aim of this research was to investigate the hyperreflexia and identify the immediate effects of transcutaneous nervous stimulation (TENS) and cryotherapy in the spasticity and electromyographic activity of hemiparetic subjects. The study is characterized as an almost experimental type, in which were selected, to compose the sample, 16 patients of both sex with CVA sequel. These individuals were evaluated by collecting the amplitude peak to peak and H reflex latency, Motor response (M response) in solear muscle and the electromyography (EMG) of the injured and healthy legs anterior tibial muscles. In the injured limb the evaluations occurred in different days for cryotherapy, TENS and control, in two moments, before and after the interventions. The healthy limb was evaluated one single time to serve as baseline, for comparison with the injured limb. It was used an statistic analysis, the t paired student test to identify the H reflex differences, latency and EMG of the injured and healthy limbs and to compare the results before and after the recourses application. The ANOVA for related samples was used to identify the differences among the recourses used. It was attributed for the statistic tests a significance level of 5%. The amplitude peak to peak of normalized maximum H reflex through the maximum motor response (Hmax/Mmax), showed itself significantly increased in the injured limb (p=0.0245). The H reflex latency was presented reduced in the injured limb (p=0, 0375). The electromyographic activity was showed decreased in the injured limb (p< 0.0001). After the TENS there was a Hmáx/Mmáx ratio decrease (0.60±0.16 versus 0.49.±0.18; P = 0.0006). Nonetheless, Just after the cryotherapy application there was an increase of Hmáx/Mmáx ratio (0.58 ± 0,15 to 0.77 ± 0.13, P=0,0007) and increase of signal latency (30.41 ± 1.87 versus 33.24 ± 2.19; P=0.0001). The electromyographic activity wasn t altered significantly by any resource. It was met statistic significant differences when the Hmáx/Mmáx P<0.0001) ratio and H reflex latency (P<0.0001) were compared between the post TENS, cryotherapy and control. One can conclude that the TENS can be used to spasticity immediate reduction, and that the cryotherapy can increase the hyperreflexia state in spastic patients. Nonetheless, the spasticity decrease or increase didn t provoke lectromyographic activity change in the muscle that is opponent to the spastic one
Resumo:
The aim of this study is to understand the version of St. Francis of Assisi created by Friar Thomas of Celano in his hagiographic works. That study also it examines how the Order of Friars Minor and the Papacy have understood the relationship between Christians and the world and turned thisunderstanding in a version of the Saint. Factors such as the replacement of Neoplatonism byAristotelianism as philosophical paradigm and economic and social changes have contributed to change the interpretation of the biblical mandate to not love the world , no longer interpreted as materiality, but as an order for Christians to flee sin. The rejection of the world was replaced by a greater appreciation of nature and society. Moreover, increasingly, the body went from enemy to friend, becoming the brotherbody. Such analysis is important to review the idea, so common in the historiography of what MaxWeber called Worldly Asceticism, the Christian life lived in society, only emerged in Protestantism in opposition to monasticism. The mendicant orders, especially the minority tried during the thirteenth century, the period of analysis of this work, experience the loving nature of Christianity and acting,through preaching and charity in the cities.To make this work, were analyzed the hagiographic discourse (on San Francisco) made by Thomas of Celano, Vita beati Francisci (called Vita Prima) and Memorial in desideiro anime (named Vita Secunda) and, from this, understand the Celano´s interpretation on how it should be the Christian's relationship with the world. The world ceased to be adistorted reflection of a perfect reality, becoming the perfect reflection of God's goodness.
Resumo:
The detection and diagnosis of faults, ie., find out how , where and why failures occur is an important area of study since man came to be replaced by machines. However, no technique studied to date can solve definitively the problem. Differences in dynamic systems, whether linear, nonlinear, variant or invariant in time, with physical or analytical redundancy, hamper research in order to obtain a unique solution . In this paper, a technique for fault detection and diagnosis (FDD) will be presented in dynamic systems using state observers in conjunction with other tools in order to create a hybrid FDD. A modified state observer is used to create a residue that allows also the detection and diagnosis of faults. A bank of faults signatures will be created using statistical tools and finally an approach using mean squared error ( MSE ) will assist in the study of the behavior of fault diagnosis even in the presence of noise . This methodology is then applied to an educational plant with coupled tanks and other with industrial instrumentation to validate the system.
Resumo:
Ethanol withdrawn individuals present a wealth of signs and symptoms, some of them related with anxiety. To better understand brain areas involved in anxiety caused by ethanol abstinence, preclinical studies have been employing models of ethanol consumption followed by withdrawal in rodents submitted to behavioral tests of anxiety, such as the elevated plus-maze. The aim of this study was to investigate if short- or long-term ethanol withdrawal could alter both anxiety-related behaviors in the elevated plus-maze (EPM) and open field tests and the number of serotonin immunorreactive cels in the dorsal raphe nucleus, a midbrain area associated with anxiety. Female Wistar rats (90 days old) were submitted to increasing concentrations of ethanol (2% for 3 days, 4% for 3 days and 6% for 15 days) as the only source of liquid diet and the control group received water ad libitum. Both groups received food ad libitum. In the behavioral experiments, on 21st day of consumption, ethanol was substituted by water (withdrawal) and 72 h or 21 days after withdrawal animals were submitted to the EPM, where it was evaluated the percentage of time and entries in the open arms and the entries in the enclosed arms during 5 minutes. Twenty and four hours after testing in the EPM, animals were submitted to the open field test for 15 minutes, where the distance traveled by the animals was observed along this period. During the first 5 minutes, the distance traveled, entries and time spent in the center of the test were analyzed. In the immunohistochemistry study, animals were submitted to 21 days of consumption of ethanol followed or not by 72 hours and 21 days of withdrawal previously perfusion, brain tissue preparation and quantification of serotonin dyed cells in the dorsal and caudal portions in the dorsal raphe nucleus. Behavioral data showed that both short- and long-term ethanol withdrawals reduced the open arms exploration in the EPM. In the open field test there were no locomotor activity changes during the total 15 minutes; however, longterm ethanol withdrawal reduced the exploration in the center of the open field during the first 5 minutes. In the immunohistochemistry step, there were no differences, when short- and long-term withdrawn groups were compared with control group; nevertheless, the chronic consumption of ethanol decreased the number of serotonergic immunorreactive cells in the dorsal part of dorsal raphe nucleus. Taken together, results here obtained suggest that both short- and long-term ethanol withdrawals promoted an anxiogenic-like effect that was not related with changes in the serotonin immunorreactivity in the dorsal and caudal parts of the dorsal raphe nucleus.
Resumo:
Barium Cerate (BaCeO3) is perovskite type structure of ABO3, wherein A and B are metal cations. These materials, or doped, have been studied by having characteristics that make them promising for the application in fuel cells solid oxide, hydrogen and oxygen permeation, as catalysts, etc .. However, as the ceramic materials mixed conductivity have been produced by different synthesis methods, some conditions directly influence the final properties, one of the most important doping Site B, which may have direct influence on the crystallite size, which in turn directly influences their catalytic activity. In this study, perovskite-type (BaCexO3) had cerium gradually replaced by praseodymium to obtain ternary type materials BaCexPr1-xO3 and BaPrO3 binaries. These materials were synthesized by EDTA/Citrate complexing method and the material characterized via XRD, SEM and BET for the identification of their structure, morphology and surface area. Moreover were performed on all materials, catalytic test in a fixed bed reactor for the identification of that person responsible for complete conversion of CO to CO2 at low operating temperature, which step can be used as the subsequent production of synthesis gas (CO + H2) from methane oxidation. In the present work the crystalline phase having the orthorhombic structure was obtained for all compositions, with a morphology consisting of agglomerated particles being more pronounced with increasing praseodymium in the crystal structure. The average crystal size was between 100 nm and 142,2 nm. The surface areas were 2,62 m²g-1 for the BaCeO3 composition, 3,03 m²g-1 to BaCe0,5Pr0,5O3 composition and 2,37 m²g-1 to BaPrO3 composition. Regarding the catalytic tests, we can conclude that the optimal flow reactor operation was 50 ml / min and the composition regarding the maximum rate of conversion to the lowest temperature was BaCeO3 to 400° C. Meanwhile, there was found that the partially replaced by praseodymium, cerium, there was a decrease in the catalytic activity of the material.
Resumo:
Cementation operation consists in an extremely important work for the phases of perforation and completion of oil wells, causing a great impact on the well productivity. Several problems can occur with the cement during the primary cementation, as well as throughout the productive period. The corrective operations are frequent, but they are expensive and demands production time. Besides the direct cost, prejudices from the interruption of oil and gas production till the implementation of a corrective operation must be also taken into account. The purpose of this work is the development of an alternative cement paste constituted of Portland cement and porcelainized stoneware residue produced by ceramic industry in order to achieve characteristics as low permeability, high tenacity, and high mechanical resistance, capable of supporting various operations as production or oil wells recuperation. Four different concentration measures of hydrated paste were evaluated: a reference paste, and three additional ones with ceramic residue in concentrations of the order of 10%, 20% and 30% in relation to cement dough. High resistance and low permeability were found in high concentration of residues, as well as it was proved the pozolanic reactivity of the residue in relation to Portland cement, which was characterized through x-ray and thermogravimetry assays. It was evident the decrease of calcium hydroxide content, once it was substituted by formation of new hydrated products as it was added ceramic residue
Resumo:
Water injection is the most widely used method for supplementary recovery in many oil fields due to various reasons, like the fact that water is an effective displacing agent of low viscosity oils, the water injection projects are relatively simple to establish and the water availability at a relatively low cost. For design of water injection projects is necessary to do reservoir studies in order to define the various parameters needed to increase the effectiveness of the method. For this kind of study can be used several mathematical models classified into two general categories: analytical or numerical. The present work aims to do a comparative analysis between the results presented by flow lines simulator and conventional finite differences simulator; both types of simulators are based on numerical methods designed to model light oil reservoirs subjected to water injection. Therefore, it was defined two reservoir models: the first one was a heterogeneous model whose petrophysical properties vary along the reservoir and the other one was created using average petrophysical properties obtained from the first model. Comparisons were done considering that the results of these two models were always in the same operational conditions. Then some rock and fluid parameters have been changed in both models and again the results were compared. From the factorial design, that was done to study the sensitivity analysis of reservoir parameters, a few cases were chosen to study the role of water injection rate and the vertical position of wells perforations in production forecast. It was observed that the results from the two simulators are quite similar in most of the cases; differences were found only in those cases where there was an increase in gas solubility ratio of the model. Thus, it was concluded that in flow simulation of reservoirs analogous of those now studied, mainly when the gas solubility ratio is low, the conventional finite differences simulator may be replaced by flow lines simulator the production forecast is compatible but the computational processing time is lower.