Entre o mar e estrela, um lugar para se bem viver : a problemática da expansão urbana da Cidade de Baía Formosa/RN

The urban expansion problem of Baía Formosa, a southern edge city of de Rio Grande do Norte eastern coast, which has been presented in other coast Brazilian towns, specially on those with tourist activities increase. Therefore, this situation brings huge concerns to their inhabitants, to their technical /scientific community and to the governments, because of the conflicts of interest and of the growth of urban problems that this has been created. At Baía Formosa, the situation is aggravated because the city is confined, once around it, there are large private proprieties, environmental preservation area and the sea, at the eastern edge. The objectives of this study are the analyses of this city expansion process in order to obtain adequate alternatives and defining methodology to apply in other urban nucleus that are subjected to similar situations. Of course, presents social relations, environmental conditions and promoting local population insertion should be considered in order that enjoin this process and contributing to a better social balance. This case study has used bibliography research, field data, maps and soil occupation recorders and photographs of the area, besides the primary data gathering by surveys carried out with many social actors. The present analysis shows that the urban expansion observed today is featured by a recent unsustainable model, which attacks the environment and brings either farm conflicts. On the other hand, the ecological tourism can represent an alternative in order to achieve an adequate expansion form, without forgetting the several structural parameters necessary to support the sustainable activities

Formulação de bloco intertravado cerâmico com adição de resíduos urbanos e industriais

The production of waste from urban and industrial activities is one of the factors of environmental contamination and has aroused attention of the scientific community, in the sense of its reuse. On the other hand, the city of Salvador/Ba, with approximately 262 channels, responsible for storm water runoff, produces every year, by the intervention of cleaning and clearing channels, a significant volume of sediments (dredged mud), and thus an appropriate methodology for their final destination. This study aims to assess the influence of incorporation of these tailings in arrays of clay for production of interlocked block ceramic, also known as ceramic paver. All the raw materials from the metropolitan region of Salvador (RMS) were characterized by x-ray fluorescence, x-ray diffraction, thermal analysis (TG and TDA), particle size analysis and dilatometry. With the use of statistical experimental planning technique, ternary diagram was defined in the study region and the analyzed formulations. The specimens were prepared with dimensions of 60x20x5mm³, by uniaxial pressing of 30 MPa and after sintering at temperatures of 900°, 1000º and 1100ºC the technological properties were evaluated: linear shrinkage, water absorption, apparent porosity, apparent specifies mass, flexural rupture and module. For the uniaxial compression strength used cylindrical probe body with Ø 50 mm. The standard mass (MP) was prepared with 90% by weight of clay and 10% by weight of Channel sediment (SCP), not being verified significant variations in the properties of the final product. With the incorporation of 10% by weight of manganese residue (PFM) and 10% by weight of the Ceramic waste (RCB) in the mass default, in addition to adjusting the plasticity due to less waste clay content, provided increased linear firing shrinkage, due the significant concentration of K2O, forming liquid phase at low temperature, contributing to decreased porosity and mechanical resistance, being 92,5 MPa maximum compressive strength verified. After extract test leachate and soluble, the piece containing 10% of the PFM, was classified as non-hazardous and inert material according to NBR10004/04 ABNT. The results showed the feasibility on using waste, SCP, RCB and PFM clay mass, at temperatures above 900ºC, paver ceramic production, according to the specifications of the technical standards, so that to exceed the 10% of the PFM, it becomes imperative to conduct studies of environmental impacts

Padrões de coexistência e utilização do hábitat por duas espécies de Herpsilochmus (Aves: Thamnophilidae)

How ecologically similar species are able to coexist has always generated great interest in the scientific community. Classical niche theory predicts that species coexistence is only possible when they segregate in at least one dimension of the ecological niche, thus leading to ecological differentiation among species. However, recent work has shown that species that are more similar in some ecological traits are the ones more prone to be able to coexist (environmental filter). The knowledge of how these forces act shaping ecological communities can reveal co-existence strategies, providing important information for management and conservation of the species. This study tested these hypotheses using a pair of coexisting species of Herpsilochmus, H. pectoralis and H. sellowi. In this study I use high resolution (50 x 50 m) ecological niche models to Identify which environmental factors best predict species occurrence. Next, I calculate the overlap in habitat use by species and build null models to test the hypothesis of spatial niche segregation. In addition, I obtain the selectivity parameters of habitat use to test whether the species H. pectoralis (larger body size) is less selective than H. sellowi (smaller body size) as stated in the literature for other species. The results reject the ecological equivalence among species, revealing that the species of Herpsilochmus explore the habitat differently, having different environmental niches. The hypothesis of environmental filter was not observed in my analysis, the observed overlap in habitat use among species was lower than expected by chance. Evidence that Herpsilochmus are spatially segregating reinforces the hypothesis of interspecific competition as the predominant force in the selection of microhabitat of the species. However, more data and experiments are necessary to state categorically that the observed pattern is a result of current or past competition

Identificação das condições gerais de conservação dos reservatórios integrantes do sistema de abastecimento de água de Natal

Infrastructure works are included in strategic areas for the social development. For that matter that all of the investments are very important for the social development. When the population has enough water and an acceptable quality, and it includes a wastewater gathering and its treatment, the whole society became less susceptible to the water diseases. Even the Water Supply and the Sewage depend for its perfect operation of reservoirs, or of the accumulation of water to provide the popular necessity, either due to retention or for the treatment wastewarer. These structures present very specific environmental conditions, because the microclimate created around them, like high environmental humidity and for the existence of many harmful substances for the concrete, such as chloride ions presents in water. The reservoir that compose the System of Water Supply of Natal were built between 1970s and 1980s, a period whom the technical and scientific community did not have in-depth studies about the reinforced concrete mechanism of deterioration. Therefore, these reservoirs have been suffered accelerated deterioration progress, and they have been shown many pathological manifestations strikingly visible. In front of all these problems this academic work aims to identify the generally conditions of conservation of all the reservoirs components of the Water Supply System of Natal. This academic work objectives to develop a recuperation plan for use in these reservoirs, in this academic work it was achieved all the survey of pathological manifestation existing in each reservoir. It was made with local visits, photographic recorders of all manifestations viii and realization of in loco tests. The other step consisted in a application of GDE/UnB metodolgy reformulated by Fonseca (2007). In the step of local visits in each reservoir it was evaluated carbonation depth, by spreading a phenolphthalein solution with 1% of concentration; evaluation of contamination of chlorides, by spreading silver nitrate solution with 1% of concentration, and evaluation of width cracks. After the conclusion of all the testings, it was established that all reservoir, studied in this academic work, have showed an advanced deteriorating condition. It´s presents prevalent pathological manifestations as unacceptable cracks, spots, efflorescence and reinforcement corrosion, and in some cases, chlorides contamination. After the conclusion of the testings and its concatenation it was able to implementing, using GDE/UnB methodology, the order of the restoration its service life and initial safety conditions

Um sistema de visão para navegação robusta de uma plataforma robótica semi-autônoma

Large efforts have been maden by the scientific community on tasks involving locomotion of mobile robots. To execute this kind of task, we must develop to the robot the ability of navigation through the environment in a safe way, that is, without collisions with the objects. In order to perform this, it is necessary to implement strategies that makes possible to detect obstacles. In this work, we deal with this problem by proposing a system that is able to collect sensory information and to estimate the possibility for obstacles to occur in the mobile robot path. Stereo cameras positioned in parallel to each other in a structure coupled to the robot are employed as the main sensory device, making possible the generation of a disparity map. Code optimizations and a strategy for data reduction and abstraction are applied to the images, resulting in a substantial gain in the execution time. This makes possible to the high level decision processes to execute obstacle deviation in real time. This system can be employed in situations where the robot is remotely operated, as well as in situations where it depends only on itself to generate trajectories (the autonomous case)

Análise de antenas utilizando substrato cerâmico, zpt, produzido por síntese auto propagante para aplicações em sistemas de micro-ondas

Ceramic substrates have been investigated by researchers around the world and has achieved a high interest in the scientific community, because they had high dielectric constants and excellent performance in the structures employed. Such ceramics result in miniaturized structures with dimensions well reduced and high radiation efficiency. In this work, we have used a new ceramic material called lead zinc titanate in the form of Zn0,8Pb0,2TiO3, capable of being used as a dielectric substrate in the construction of various structures of antennas. The method used in constructing the ceramic combustion synthesis was Self- Sustained High Temperature (SHS - "Self-Propagating High-Temperature Synthesis") which is defined as a process that uses highly exothermic reactions to produce various materials. Once initiated the reaction area in the reaction mixture, the heat generated is sufficient to become self-sustaining combustion in the form of a wave that propagates converting the reaction mixture into the product of interest. Were analyzed aspects of the formation of the composite Zn0,8Pb0,2TiO3 by SHS powders and characterized. The analysis consisted of determining the parameters of the reaction for the formation of the composite, as the ignition temperature and reaction mechanisms. The production of composite Zn0,8Pb0,2TiO3 by SHS performed in the laboratory, was the result of a total control of combustion temperature and after obtaining the powder began the development of ceramics. The product was obtained in the form of regular, alternating layers of porous ceramics and was obtained by uniaxial pressing. 10 The product was characterized by analysis of dilatometry, X-ray diffraction analysis and scanning electron microscopy. One of the contributions typically defined in this work is the development of a new dielectric material, nevertheless presented previously in the literature. Therefore, the structures of the antennas presented in this work consisted of new dielectric ceramics based Zn0,8Pb0,2TiO3 usually used as dielectric substrate. The materials produced were characterized in the microwave range. These are dielectrics with high relative permittivity and low loss tangent. The Ansoft HFSS, commercial program employee, using the finite element method, and was used for analysis of antennas studied in this work

Técnicas de computação natural para segmentação de imagens médicas

Image segmentation is one of the image processing problems that deserves special attention from the scientific community. This work studies unsupervised methods to clustering and pattern recognition applicable to medical image segmentation. Natural Computing based methods have shown very attractive in such tasks and are studied here as a way to verify it's applicability in medical image segmentation. This work treats to implement the following methods: GKA (Genetic K-means Algorithm), GFCMA (Genetic FCM Algorithm), PSOKA (PSO and K-means based Clustering Algorithm) and PSOFCM (PSO and FCM based Clustering Algorithm). Besides, as a way to evaluate the results given by the algorithms, clustering validity indexes are used as quantitative measure. Visual and qualitative evaluations are realized also, mainly using data given by the BrainWeb brain simulator as ground truth

Estudo do efeito de substratos metamateriais em parâmetros de antenas de microfita

Microstrip antennas are subject matter in several research fields due to its numerous advantages. The discovery, at 1999, of a new class of materials called metamaterials - usually composed of metallic elements immersed in a dielectric medium, have attracted the attention of the scientific community, due to its electromagnetic properties, especially the ability to use in planar structures, such as microstrip, without interfering with their traditional geometry. The aim of this paper is to analyze the effects of one and bidimensional metamaterial substrates in microstrip antennas, with different configurations of resonance rings, SRR, in the dielectric layer. Fractal geometry is applied to these rings, in seeking to verify a multiband behavior and to reduce the resonance frequency of the antennas. The results are then given by commercial software Ansoft HFSS, used for precise analysis of the electromagnetic behavior of antennas by Finite Element Method (FEM). To reach it, this essay will first perform a literature study on fractal geometry and its generative process. This paper also presents an analysis of microstrip antennas, with emphasis on addressing different types of substrates as part of its electric and magnetic anisotropic behavior. It s performed too an approach on metamaterials and their unique properties

Aplicação e análise de metodologia de deterioração ambiental em micro-bacia do seridó potiguar

In the contemporary world to the deterioration of semi-arid areas of the planet has been the focus of media attention and the scientific community. Brazil has a semiarid, considered the most problematic of the world, either by pressure from physical factors, whether as a result of misguided public policies, has over time been suffering from the consequences of a deterioration that expands over the years. Methodologies, that amidst the problems of semi-arid, come against the deteriorating local, have a good chance to be reapplied in other contexts around the world. This research, based on methodological model for analyzing environmental deterioration, introduced and examined the applicability of the methodology in the semi-arid region of Rio Grande do Norte - Brazil. Although the results provide guidelines for the introduction of underground dams, the application of the methodology was ineffective, given the high rates of forest cover that gave low values for the physical diagnosis conservationist

A escrita do texto acadêmico na graduação: modos de utilização de conceitos teóricos de uma área de conhecimento

In this study we have developed a discussion about academic text production in the undergraduate course of Literature and Languages. Specifically, we are going to analyze the monographic text writing in order to verify the meaning effects created from the ways of showing other s discourses that constitute a written production. As a means to do that, we are going to answer the following question: How does a young researcher make use of a theory in order to be part of a particular scientific community? We aim to: 1) analyze the linguistic resources, like quotations and signs of cohesion that demonstrate the other s voice presence in academic writing; 2) observe the meaning effects produced through the ways that the one who writes shows the other s voice in the written text. Firstly, we have selected 23 (twentythree) monographs produced in the last five years by students from a Literature and Languages undergraduate course in a determined public university. However, in this study, we have analyzed just 02 (two) different monographic texts. To develop such an investigation, we have inquired Kuhn s concept of science, which shows the existence of different meanings of science production in the course of the centuries. It allows us to define academic writing as science production that develops and contributes to knowledge production. With the purpose of restricting the meaning of writing conception, we have relied on Coracini, who assumes that all writing production is the registration of the self, in other words, writing comes from the subject s intervention, it is to say that only an imposition of the self guarantees the subject as author of what he writes. We have as theoretical basis the following concepts: 1-) Authier-Revus s enunciative heterogeneity, that allowed us to analyze the written marks of the other in the monographic writing; 2-) Pêcheux s reformulation-paraphrase and Orlandi s polysemy and paraphrase, concepts that present notions of productivity and creativity as ways of meaning production, and allows us to observe how the process of language production in academic writing is established; 3-) Rossi-Landi s concept of exchange-value and use-value, which consider language as a linguistic work, allowing us to verify the differences between use and social functionality in a determined theory; and 4-) Possenti s notion of authorship indicia, with which we have identified attitudes that make the one who writes author of his own text. We have verified that writing characterized for repetition and reproduction may develop a meaning effect that constructs the idea that writing production promotes an author, a concept or a theory. We have also realized that a written text that restricts itself to reproduce other authors discourses and does not articulate a theory with data analysis or with work methodology, when evaluated is approved and legitimates itself as scientific production. That demonstrates the existence of academic productions that do not develop any functionality of the employed theory. The text works as a means to promote its theoretical concepts, and theory. It is to say that the theoretical foundantion, which usually is a way to argue and sustain scientific production, does not have any function. Thus, we consider that the way someone shows the other s discourse in academic writing may work as a way to underline what the other asserts to the detriment of the researcher s words. This fact allows us to comprehend that a way of writing may evidence a meaning effect of the author s, theory s or theoretical concepts promotion

Medidas e análise estatística em sinais bioelétricos sobre pontos de acupuntura

In the 20th century, the acupuncture has spread on occident as a complementary practice of heath care. This fact has motivated the international scientific community to invest in research that seek to understand why acupuncture works. In this work we compare statistically volt age fluctuation of bioelectric signals caught on the skin at an acupuncture point (IG 4) another nearby on acupuncture point. The acquisition of these signals was performed utilizing an electronic interface with a computer, which was based on an instrumentation amplifier designed with adequate specifications to this end. On the collected signals from a sample of 30 volunteers we have calculated major statistics and submitted them to pairing t-test with significance leveI a = O, 05. We have estimated to bioelectric signals the following parameters: standard deviation, asymmetry and curtose. Moreover, we have calculated the self-correlation function matched by on exponential curve we have observed that the signal decays more rapidly from a non-acupoint then from an acupoint. This fact is an indicative of the existence of information in the acupoint

Propriedades magnéticas quase-estáticas de filmes ferromagnéticos amorfos de FeCuNbSiB

Today, one of the topics that attracts interest of the scientific community is the understanding of magnetic properties of magnetic systems with reduced dimensions, in particular, ferromagnetic thin films. In this case, the comprehension and control of these properties, as well as the development of routes to obtain them, are crucial issues in many aspects of current and future technologies for storage and transmission of information in the electro-electronic industry. There are several materials that exhibit soft magnetic properties, and we highlight the amorphous alloys and that ones obtained by partial crystallization, so-called nanocrystalline materials. The production of these alloys as magnetic ribbons is very common in scientific and technological area, but there are just a few works related to the production of these alloys as thin films. In this work, we studied the quasi-static magnetic properties of ferromagnetic thin films based on FeCuNbSiB in a wide range of thicknesses, from 20 to 500 nm, produced by sputtering. In particular, after the structural characterization performed via X-ray diffraction, the magnetic properties of the sets of samples were investigated using experimental magnetization curve, obtained using a vibrating sample magnetometer, as well as through theoretical curves obtained by theoretical modeling and numerical computation. The modeling process is based on the Stoner Wohlfarth model applied to three dimensions, and adds some energy terms, using as reference experimental results of magnetization. In this case, from the comparison between theoretical and experimental results and the analysis of the constant anisotropy behavior as a function of film thickness, we aim to obtain further information on the magnetization process of the samples, to identify routes for the production of thin films and develop a theoretical to films to use it, in the future, in the obtainment of the theoretical curves of some magnetic measurements, such as magnetoimpedance and magnetoresistance

Publicação e avaliação de periódicos científicos: paradoxos da classificação Qualis em Psicologia

Recently, Brazilian scientific production has increased greatly, due to demands for productivity from scientific agencies. However, this high increases requires a more qualified production, since it s essential that publications are relevant and original. In the psychological field, the assessment scientific journals of the CAPES/ANPEPP Commission had a strong effect on the scientific community and raised questions about the chosen evaluation method. Considering this impact, the aim of this research is a meta-analysis on the assessment of Psychological journals by CAPES to update the Qualis database. For this research, Psychology scientific editors (38 questionnaires were applied by e-mail) were consulted, also 5 librarians who work with scientific journals assessment (semi-structured interviews) and 8 members who acted as referees in the CAPES/ANPEPP Commission (open questions were sent by e-mail). The results are shown through 3 analysis: general evaluation of the Qualis process (including the Assessment Committee constitution), evaluation criteria used in the process and the effect of the evaluation on the scientific community (changes on the editing scene included). Some important points emerged: disagreement among different actors about the suitability of this evaluation model; the recognition of the improvement of scientific journals, mainly toward normalization and diffusion; the verification that the model does not point the quality of the journal, i.e., the content of the scientific articles published in the journal; the disagreement with the criteria used, seemed necessary and useful but needed to be discussed and cleared between the scientific community. Despite these points, the scientific journals evaluation still is the main method to assure quality for Psychology publications

Tomada de decisão de Psicólogos em avaliação Psicologica

Psychological assessment is a procedure that is inserted in all areas of a psychologist s professional field of work. When starting any psychological intervention, it is necessary to carry an analysis of how individual operate in order to identify and define their demands to adequately meet them. It is important to study this practice because the choice of instruments, techniques and procedures to be employed influences the efficiency and effectiveness of the work and the image of the profession towards society in general, also impacting the scientific community. This study aimed to identify, in the subjects, the percentage of professionals in psychology who make use of the Psychological Assessment in the Northeastern region of Brazil; another objectives were to analyze the profile of these professionals in terms of gender, time after graduation, additional training in PA, the state of the country where he/she works; to check how psychologists do their planning when using PA as well as to identify which differences can be observed in terms of time from graduation and additional training in the process of planning the assessment different extents. The instrument used was an online questionnaire and the sample was by adhesion to the application. The attendance was of 159 professionals and most of them were females with a specialist degree. It was found that the majority of the professionals perform the planning of the PA, establishing a method and choosing the most appropriate strategies to be used. It was also verified that most of the subjects fulfill the steps of the whole process, and when planning the techniques of data collection, integrating database from different sources, reporting the results and returning the information, the professional demonstrates his/her goals to understand their demands and accomplish the decision making and/or proposed intervention for individuals assessed. It was found that the undergraduate degree may not have produced a more complete effect in the professional qualification and therefore, of the quality of the actions in PA, and that there is a need for training and continuing education

Síntese e Caracterização de Titanatos de Cobalto e Níquel, dopados com Praseodímio, obtidos a partir da decomposição de Nitrilotriacetatos

In recent years, studies about the physicochemical properties of mixed oxides, call attention of the scientific community, properties like as piezoelectricity, photoluminescence, or applications as catalysts, arise in these compounds, when their chemical compositions are modified, in this context some routes are employed in the synthesis of these materials, among which can be cited these methods: ceramic, combustion, co-precipitation, Pechini or polymeric precursor method, hydrothermal, sol-gel; these routes are divided into traditional routes or chemical routes. In this work were synthesized oxides with variable composition, from the thermal decomposition of titanium, cobalt, nickel and praseodymium nitrilotriacetates. The nitrilotriacetates were characterized by IR Spectroscopy (FTIR), Thermogravimetric (TG/ DTG) and Differential Scanning Calorimetry (DSC), while oxides have been characterized by X-ray diffraction (XRD), Spectrofluorimetry and IR Spectroscopy (FTIR). From FTIR data, it was demonstrated that the displacement of the band corresponding to the carboxylate group (νCOOH) at 1712 cm-1, present in nitrilotriacetic acid (H3NTA), for 1680-1545 cm-1, these stretches are characteristics of coordinated nitrilotriacetates, By thermal analysis (TG/DTG /DSC), it was suggested, that in an oxidizing atmosphere (air) oxides are obtained at lower temperatures than in an inert atmosphere N2(g). By results from X-ray Diffraction (XRD), it was determinated that the oxides are crystalline and the predominant phases obtained are summarized titanate phases rutile and ilmenite. By fluorimetry was observed that the intensity of emission bands are directly proportional to the concentration of ions Ni2+, Co2+ and Pr3+, and IR spectroscopy (FTIR) from oxides, demonstrated the disappearance of characteristic bands by nitrilotriacetates, determining the complete decomposition of the nitrilotriacetates in oxides