Influência da alimentação sobre os níveis de retinol do leite caprino

The caprine milk is a product of high biological value and high digestibility. Due to these characteristics it is quite used by newly born children that are not breastfed or that are intolerant to the bovine milk. The vitamin deficiency is a public health problem in underdeveloped areas as the Northeast of Brazil and where areas the caprine ones adapt very well. The present study was led to analyze the influence of the feeding in the vitamin levels in the caprine milk. The animals used were the races Saanen and Murciana, divided in three groups. The first group with 38 animals of race Saanen and the second with 30 animals of race Murciana were, fed with concentrated and voluminous. A third group with 20 animals of the race Saanen was fed exclusively with voluminous. The four group was added with 10. 000 UI of retinol palmitato, administered directly, like capsule, in the mouth of animal. Parallel it was verified the level of retinol of milk in the beginning and final of the sucked, in the goats of the second group (race Murciana n =30). The retinol of caprine milk was determined through the system of liquid cromatografia of high efficiency (HPLC). The retinol levels in the studied groups were respectively: first (38. 5 ± 12. 7 μg/100ml), second (40. 5 ± 9. 7 μg/100ml); third, with 20 animals of race Saanen fed exclusively with voluminous (23. 1 ± 6. 7 μg/100ml) and in the group a, suplementation with 10. 000 UI of retinol palmitato (43,7 ± 18,8 μg/100ml) before, and (61,9 ± 26,9 μg/100ml) after the supplementation. It was not found significant difference between the averages from animals of the first and second group, that were fed with the same concentrate diet and voluminous, showing that the retinol levels in the milk of these two races are equivalent. Already in the animals of the first and third group that they were fed with different diets, in those which diet was just voluminous, a drastic reduction was verified in the retinol levels. In relation to the retinol of the milk in different moments from the same sucked, it was observed in the beginning of the breast-feeding (22. 6 ± 9. 8 μg/100ml) and at the end of the sucked (49. 6 ± 14. 7μg/100ml), being the difference between the averages, statistically significant (p < 0,0001). Already in the animals that were supplemented, a significant increase was observed in the retinol concentration, being obtained a medium response of 41,85%

Liofilização como ferramenta de preservação de sêmen humano

Liofilização é um método alternativo de preservação de espermatozóide, com vantagens sobre o criopreservado pelo baixo custo de armazenamento, facilidade no transporte pela não necessidade de containers e baixas taxas de contaminação. Esse estudo foi realizado no intuito e testar a eficácia de 5 açúcares na proteção do material cromossômico (DNA) de espermatozoides humanos liofilizados após reidratação. Para isso foram utilizados espermatozoides de indivíduos classificados como normozooespérmicos segundo OMS. Em eppendorfs foram colocados 1ml de sêmen que foram diluídos (1:1) em 1 ml de solução de Glicose, Lactose, Maltose, Manitol e Sorbitol, separadamente, nas concentrações 0.2M, 0.4M, 0.5M e 0.6M. Essas amostras foram analisadas em duas fases a primeira após congelamento observando a porcentagem de células com danos de membrana e outra análise após a liofilização, utilizando o Teste Cometa para detectar as taxas de fragmentação de DNA dos espermatozoides recuperadas após reidratação. O processo de liofilização de espermatozoides não foi capaz de recuperar a motilidade dos mesmos, mas foi capaz de manter 62.30 ± 13.76% de membrana plasmática intacta na presença de 0.6M manitol. As substâncias que melhor preservaram o DNA dessas células foram 0.2 lactose, 0.2M e 0.6M manitol e sorbitol, com apenas 4% de danos ao DNA. Esses resultados sugerem uma boa proteção ao DNA de espermatozoides humanos liofilizados, mas ainda requer testes adicionais para avaliar a fertilização e estudos que garantam a viabilidade da prole

Controle de Temperatura do Sistema de Refrigeração a água de uma tocha plasmática Indutiva Utilizando Lógica fuzzy

Este projeto propõe desenvolver e implementar um controlador para o sistema de refrigeração da tocha indutiva a plasma térmico. Este processo é feito a partir da medição da temperatura através de um sensor do sistema de refrigeração. O sinal produzido será enviado para uma entrada analógica do microcontrolador da família PIC, que utilizando os conceitos de lógica fuzzy, controla a velocidade de um motor bomba. Este é responsável por diminuir ou aumentar o fluxo circulante de água que passa pela bobina, pelo corpo da tocha e pelo flange de fixação, deixando-os na temperatura desejada. A velocidade desta bomba será controlada por um inversor de frequência. O microcontrolador, também, acionará um ventilador caso exceda a temperatura de referência. A proposta inicial foi o desenvolvimento do controle da temperatura da bobina de uma tocha indutiva a plasma, mas com algumas adequações, foi possível também aplicar no corpo da tocha. Essa tocha será utilizada em uma planta de tratamento de resíduos industriais e efluentes petroquímicos. O controle proposto visa garantir as condições físicas necessárias para tocha de plasma, mantendo a temperatura da água em um determinado nível que permita o resfriamento sem comprometer, no entanto, o rendimento do sistema. No projeto será utilizada uma tocha de plasma com acoplamento indutivo (ICPT), por ter a vantagem de não possuir eletrodos metálicos internos sendo erodidos pelo jato de plasma, evitando uma possível contaminação, e também devido à possibilidade do reaproveitamento energético através da cogeração de energia. O desenvolvimento da tecnologia a plasma na indústria de tratamento de resíduos vem obtendo bons resultados. Aplicações com essa tecnologia têm se tornado cada vez mais importantes por reduzir, em muitos casos, a produção de resíduos e o consumo de energia em vários processos industriais

Análise teórico-experimental do coeficiente de perfomance (COP) de um sistema de refrigeração por jato-compressão

The use of waste heat of energy conversion equipment to produce a cooling effect, consists currently in a very interesting way of efficiency improvement of energy systems. The present research has as intention the theoretical and experimental study of a new intermittent refrigeration system ejector cycle characteristics, with use of waste heat. Initially, was doing a bibliographical survey about the vapor ejector refrigeration system technology. In the following stage was doing a simulation of the corresponding thermodynamic cycle, with preliminarily intention to evaluate the performance of the system for different refrigerants fluids. On the basis of the results of the simulation were selected the refrigerant fluid and developed an experimental group of benches of the refrigeration system considered, where pressure and temperature sensory had been inserted in strategical points of the refrigeration archetype and connected to a computerized data acquisition system for measure the refrigerant fluid properties in the thermodynamic cycle. The test results obtained show good agreement with the literature

Caracterização físico-química, reológica e sensorial de iogurte obtido pela mistura dos leites bubalino e caprino

Milk from different animals can be used for dairy production. Yoghurt is a popular fermented milk product and considered to be one of the greatest importance in terms of consumer acceptance and consumption. The present research deals with the production of strawberry set-type yoghurt by mixing goat and buffalo s milk and it has the objective of taking advantage of the intrinsic characteristics of each milk to produce a final product with desirable attributes. It was conducted by analyzing five experimental groups with different proportions of goat and buffalo s milk: C 100% goat s milk; 7C3B - 70% goat s milk and 30% buffalo s milk, 5C5B - 50% goat s milk and 50% buffalo s milk, 3C7B 30% goat s milk and 70% buffalo s milk; B - 100% buffalo s milk. Each group was evaluated for total solids content and the acidification profile was monitored every 30 minutes by pH analysis. The yoghurt samples were analyzed for physical-chemical (pH, acidity, protein, fat, total and reducing sugars, ash and total solids), rheological (syneresis and viscosity) and sensory characteristics (appearance, odor, consistency and flavour). Samples with higher percentual of bubaline milk reached Vm faster, but the time necessary for pH 4.6 (Te) were similar between groups. Statistical differences (p<0.05) were observed for fat and total solids content of yoghurt, with superior values for groups higher proportions of buffalo s milk. The parameters of behavior reached by the model of Ostwald of Waale pointed yoghurt samples as non-Newtonian and pseudoplastic fluids. Yoghurt made only with goat s milk (C) had higher values (p<0.05) for syneresis, which can be explained by its fragile coagulum. Additionally, this group also had the lowest sensory scores for the attributes consistence and taste, while bubaline yoghurt (B) obtained the best acceptance indexes for all of the appraised parameters

Sistema de produção misto de caprino na região central do estado do Rio Grande do Norte

This study aimed to evaluate the performance and profitability of Canindé goats kept under semi-intensive management in mix farming system. 84 animals were used, being 81 does e three bucks.. The means of fertility rate at parturition, prolificacy and percentages of pregnant, kid survival and reproductive rate were compared by Tukey test at significance level of 5.0%. The kid weights from birth to weaning were submitted to variance analysis considering sex and birth type and the means were compared by Tukey test at 5.0% of significance. The percentages of fertility rate by ultrassographic were 91.36 and parturition 74.84. The prolificacy was 1.53. Independently of sex the mortality rate of kids from birth to weaning was 12.3. The average weights of offspring were 2.11 and 1.92 kg and 6.74 and 6.84 kg for male and female offspring at birth and weaning, in this order. The average weights of kids, meaning PN, P28, P56, P63, in the first season of kidding were 2.11 ± 0.46 kg, 3.63 ± 1.04 kg, 5.96 ± 158 kg and 6.74 ± 1.79 kg. There was significant differences (P<0,05) only to birth weight of kids sons of buck 135. However, the fertility at parturition for first and second breeding seasons (BS) were 87.65 and 62.96, respectively (P<0.05). The prolificacy was 1.58 and 1.47 to first and second BS in this order. The percentages of offspring survival from birth to weaning, to first and second BS were 92.86 and 80.00, respectively. From the first BS the reproduction rate was 1.28 while in the second was 0.74. After weaning the duration of lactation was 104 days to first breeding parturition and 38 days in the second one. The total milk production was 853.50 kg. The kids weight gain was influenced by season of year, wet and dry and buck (P<0.05). Were concluded that the seasons of year when breeding season and parturition occur strongly affected the productive performance and profitability of production system

Polpa de jambolão (Eugenia jambolana Lam.) fresca e desidratada: características físico-químicas, bioativas e funcionais, efeitos biológicos em Caenorhabditis elegans e uso para produção de frozen yogurt caprino probiótico

This work evaluated the fresh, spray dried (with 10 % of Arabic Gum) and freeze dried jambolan pulp (Eugenia jambolana Lam.) in regard to physicochemical (pH, moisture, water activity, average particle diameter, solubility and color), bioactive [total phenolic content (TPC), monomeric anthocyanin, pronathocyanidin (PA), total elagic acid (TEA), myricetin and cyanidin] and in vitro functionality (antioxidant, antienzymatic and antimicrobial activities]. In addition, the in vivo functionality of jambolan pulp was investigated using the Caenorhabditis elegans model for insulin signaling, longevity and induced neurodegeneration (Alzheimer’s disease and Parkinson’s disease related symptoms). The dried jambolan pulp presented TPC retention (50% to 75%), PA (90% to 98%), TEA (31% to 83%), myricetin (40% to 84%), cyanidin (72% to 84%) and antioxidant activity (15%). The fresh jambolan pulp, the freeze dried pulp and the spray dried jambolan pulp presented high enzymatic inhibitory activity against pancreatic lipase (4,4 to 5,8 mg/mL), alpha-glycosidase (10,3 to 13,8 mg/mL) and alpha-amylase (8,9 to 11,2 mg/mL). They also were active inhibitors against the pathogen S. aureus. The dried jambolan experimental samples were able to increase the expression of several genes linked to the insulin signaling pathways (SIR-2.1, PPTR-1, DAF-16, SOD-3, e CTL) and increased the lifespan in C. elegans (18,07 % - 24,34 %), besides decreasing the amyloid AB1-42 aggregation induced paralysis and MPP+ (1-methyl-4-phenylpyridinium) induced neurodegeneration. Based on that, the jambolan pulp and the spray dried jambolan pulp were further selected for the production of caprine frozen yogurt with the addition of Bifidobacterium animalis subsp. lactis BI-07. The final product were evaluated in regard to their physicochemical (pH, acidity, total solids, protein, total reducing sugars, fat, ashes, overrun, melting test), bioactive (TPC and monomeric anthocyanin, antioxidant activity, probiotic viability and sensory analysis (sensory acceptance). The results showed that samples with probiotic had lowest pH and higher acidity, TPC, anthocyanin and antioxidant activity. It was also observed low overrun (14.2% to 22.6%). vi Samples with probiotic had lower flavor scores. Overall, this research presents the jambolan as a highly functional bioactive-rich fruit with the potential to modulate important biological pathways, extend lifespan and retard the development of neurodegenerative diseases. Jambolan is an underexploited exotic fruit with a high colorant potential and this thesis shows for the first time in the literature important technological, biological and scientific data about this fruit that could be used towards the development of health-oriented food products.

Desenvolvimento de métodos para quantificação de benzilpenicilina em medicamentos veterinários e seus resíduos em leite bovino e caprino por UFLC-DAD

The Benzylpenicillin (PENG) have been as the active ingredient in veterinary medicinal products, to increase productivity, due to its therapeutic properties. However, one of unfortunate quality and used indiscriminately, resulting in residues in foods exposed to human consumption, especially in milk that is essential to the diet of children and the ageing. Thus, it is indispensable to develop new methods able to detect this waste food, at levels that are toxic to human health, in order to contribute to the food security of consumers and collaborate with regulatory agencies in an efficient inspection. In this work, were developed methods for the quality control of veterinary drugs based on Benzylpenicillin (PENG) that are used in livestock production. Additionally, were validated methodologies for identifying and quantifying the antibiotic residues in milk bovine and caprine. For this, the analytical control was performed two steps. At first, the groups of samples of medicinal products I, II, III, IV and V, individually, were characterized by medium infrared spectroscopy (4000 – 600 cm-1). Besides, 37 samples, distributed in these groups, were analyzed by spectroscopy in the ultraviolet and near infrared region (UV VIS NIR) and Ultra Fast Liquid Chromatograph coupled to linear arrangement photodiodes (UFLC-DAD). The results of the characterization indicated similarities, between PENG and reference standard samples, primarily in regions of 1818 to 1724 cm-1 of ν C=O that shows primary amides features of PENG. The method by UFLC-DAD presented R on 0.9991. LOD of 7.384 × 10-4 μg mL-1. LOQ of 2.049 × 10-3 μg mL-1. The analysis shows that 62.16% the samples presented purity ≥ 81.21%. The method by spectroscopy in the UV VIS NIR presented medium error ≤ 8 – 12% between the reference and experimental criteria, indicating is a secure choice for rapid determination of PENG. In the second stage, was acquiring a method for the extraction and isolation of PENG by the addition of buffer McIlvaine, used for precipitation of proteins total, at pH 4.0. The results showed excellent recovery values PENG, being close to 92.05% of samples of bovine milk (method 1). While samples of milk goats (method 2) the recovery of PENG were 95.83%. The methods for UFLC-DAD have been validated in accordance with the maximum residue limit (LMR) of 4 μg Kg-1 standardized by CAC/GL16. Validation of the method 1 indicated R by 0.9975. LOD of 7.246 × 10-4 μg mL-1. LOQ de 2.196 × 10-3 μg mL-1. The application of the method 1 showed that 12% the samples presented concentration of residues of PENG > LMR. The method 2 indicated R by 0.9995. LOD 8.251 × 10-4 μg mL-1. LOQ de 2.5270 × 10-3 μg mL-1. The application of the method showed that 15% of the samples were above the tolerable. The comparative analysis between the methods pointed better validation for LCP samples, because the reduction of the matrix effect, on this account the tcalculs < ttable, caused by the increase of recovery of the PENG. In this mode, all the operations developed to deliver simplicity, speed, selectivity, reduced analysis time and reagent use and toxic solvents, particularly if compared to the established methodologies.

Desenvolvimento de métodos para quantificação de benzilpenicilina em medicamentos veterinários e seus resíduos em leite bovino e caprino por UFLC-DAD

The Benzylpenicillin (PENG) have been as the active ingredient in veterinary medicinal products, to increase productivity, due to its therapeutic properties. However, one of unfortunate quality and used indiscriminately, resulting in residues in foods exposed to human consumption, especially in milk that is essential to the diet of children and the ageing. Thus, it is indispensable to develop new methods able to detect this waste food, at levels that are toxic to human health, in order to contribute to the food security of consumers and collaborate with regulatory agencies in an efficient inspection. In this work, were developed methods for the quality control of veterinary drugs based on Benzylpenicillin (PENG) that are used in livestock production. Additionally, were validated methodologies for identifying and quantifying the antibiotic residues in milk bovine and caprine. For this, the analytical control was performed two steps. At first, the groups of samples of medicinal products I, II, III, IV and V, individually, were characterized by medium infrared spectroscopy (4000 – 600 cm-1). Besides, 37 samples, distributed in these groups, were analyzed by spectroscopy in the ultraviolet and near infrared region (UV VIS NIR) and Ultra Fast Liquid Chromatograph coupled to linear arrangement photodiodes (UFLC-DAD). The results of the characterization indicated similarities, between PENG and reference standard samples, primarily in regions of 1818 to 1724 cm-1 of ν C=O that shows primary amides features of PENG. The method by UFLC-DAD presented R on 0.9991. LOD of 7.384 × 10-4 μg mL-1. LOQ of 2.049 × 10-3 μg mL-1. The analysis shows that 62.16% the samples presented purity ≥ 81.21%. The method by spectroscopy in the UV VIS NIR presented medium error ≤ 8 – 12% between the reference and experimental criteria, indicating is a secure choice for rapid determination of PENG. In the second stage, was acquiring a method for the extraction and isolation of PENG by the addition of buffer McIlvaine, used for precipitation of proteins total, at pH 4.0. The results showed excellent recovery values PENG, being close to 92.05% of samples of bovine milk (method 1). While samples of milk goats (method 2) the recovery of PENG were 95.83%. The methods for UFLC-DAD have been validated in accordance with the maximum residue limit (LMR) of 4 μg Kg-1 standardized by CAC/GL16. Validation of the method 1 indicated R by 0.9975. LOD of 7.246 × 10-4 μg mL-1. LOQ de 2.196 × 10-3 μg mL-1. The application of the method 1 showed that 12% the samples presented concentration of residues of PENG > LMR. The method 2 indicated R by 0.9995. LOD 8.251 × 10-4 μg mL-1. LOQ de 2.5270 × 10-3 μg mL-1. The application of the method showed that 15% of the samples were above the tolerable. The comparative analysis between the methods pointed better validation for LCP samples, because the reduction of the matrix effect, on this account the tcalculs < ttable, caused by the increase of recovery of the PENG. In this mode, all the operations developed to deliver simplicity, speed, selectivity, reduced analysis time and reagent use and toxic solvents, particularly if compared to the established methodologies.

Análise tribo-termodinâmica da aplicação de nanopartículas de Al2O3 como aditivo lubrificante em compressor hermético de refrigeração

The thermodynamic performance of a refrigeration system can be improved by reducing the compression work by a particular technique for a specific heat removal rate. This study examines the effect of small concentrations of Al2O3 (50 nm) nanoparticles dispersion in the mineral oil based lubricant on the: viscosity, thermal conductivity, and lubrication characteristics as well as the overall performance (based on the Second Law of Thermodynamics) of the refrigerating system using R134a or R600a as refrigerants. The study looked at the influences of variables: i) refrigerant charge (100, 110, 120 and 130 g), ii) rotational speed of the condenser blower (800 and 1100 RPM) and iii) nanoparticle concentration (0.1 and 0.5 g/l) on the system performance based on the Taguchi method in a matrix of L8 trials with the criterion "small irreversibility is better”. They were carried pulldown and cycling tests according to NBR 12866 and NBR 12869, respectively, to evaluate the operational parameters: on-time ratio, cycles per hour, suction and discharge pressures, oil sump temperature, evaporation and condensation temperatures, energy consumption at the set-point, total energy consumption and compressor power. In order to evaluate the nanolubricant characteristics, accelerated tests were performed in a HFRR bench. In each 60 minutes test with nanolubricants at a certain concentration (0, 0.1 and 0.5 g/l), with three replications, the sphere (diameter 6.00 ± 0.05 mm, Ra 0.05 ± 0.005 um, AISI 52100 steel, E = 210 GPa, HRC 62 ± 4) sliding on a flat plate (cast iron FC200, Ra <0.5 ± 0.005 um) in a reciprocating motion with amplitude of 1 mm, frequency 20 Hz and a normal load of 1,96 N. The friction coefficient signals were recorded by sensors coupled to the HFRR system. There was a trend commented bit in the literature: a nanolubricant viscosity reduction at the low nanoparticles concentrations. It was found the dominant trend in the literature: increased thermal conductivity with increasing nanoparticles mass fraction in the base fluid. Another fact observed is the significant thermal conductivity growth of nanolubricant with increasing temperature. The condenser fan rotational speed is the most influential parameter (46.192%) in the refrigerator performance, followed by R600a charge (38.606%). The Al2O3 nanoparticles concentration in the lubricant plays a minor influence on system performance, with 12.44%. The results of power consumption indicates that the nanoparticles addition in the lubricant (0.1 g/L), together with R600a, the refrigerator consumption is reduced of 22% with respect to R134a and POE lubricant. Only the Al2O3 nanoparticles addition in the lubricant results in a consumption reduction of about 5%.

Análise tribo-termodinâmica da aplicação de nanopartículas de Al2O3 como aditivo lubrificante em compressor hermético de refrigeração

The thermodynamic performance of a refrigeration system can be improved by reducing the compression work by a particular technique for a specific heat removal rate. This study examines the effect of small concentrations of Al2O3 (50 nm) nanoparticles dispersion in the mineral oil based lubricant on the: viscosity, thermal conductivity, and lubrication characteristics as well as the overall performance (based on the Second Law of Thermodynamics) of the refrigerating system using R134a or R600a as refrigerants. The study looked at the influences of variables: i) refrigerant charge (100, 110, 120 and 130 g), ii) rotational speed of the condenser blower (800 and 1100 RPM) and iii) nanoparticle concentration (0.1 and 0.5 g/l) on the system performance based on the Taguchi method in a matrix of L8 trials with the criterion "small irreversibility is better”. They were carried pulldown and cycling tests according to NBR 12866 and NBR 12869, respectively, to evaluate the operational parameters: on-time ratio, cycles per hour, suction and discharge pressures, oil sump temperature, evaporation and condensation temperatures, energy consumption at the set-point, total energy consumption and compressor power. In order to evaluate the nanolubricant characteristics, accelerated tests were performed in a HFRR bench. In each 60 minutes test with nanolubricants at a certain concentration (0, 0.1 and 0.5 g/l), with three replications, the sphere (diameter 6.00 ± 0.05 mm, Ra 0.05 ± 0.005 um, AISI 52100 steel, E = 210 GPa, HRC 62 ± 4) sliding on a flat plate (cast iron FC200, Ra <0.5 ± 0.005 um) in a reciprocating motion with amplitude of 1 mm, frequency 20 Hz and a normal load of 1,96 N. The friction coefficient signals were recorded by sensors coupled to the HFRR system. There was a trend commented bit in the literature: a nanolubricant viscosity reduction at the low nanoparticles concentrations. It was found the dominant trend in the literature: increased thermal conductivity with increasing nanoparticles mass fraction in the base fluid. Another fact observed is the significant thermal conductivity growth of nanolubricant with increasing temperature. The condenser fan rotational speed is the most influential parameter (46.192%) in the refrigerator performance, followed by R600a charge (38.606%). The Al2O3 nanoparticles concentration in the lubricant plays a minor influence on system performance, with 12.44%. The results of power consumption indicates that the nanoparticles addition in the lubricant (0.1 g/L), together with R600a, the refrigerator consumption is reduced of 22% with respect to R134a and POE lubricant. Only the Al2O3 nanoparticles addition in the lubricant results in a consumption reduction of about 5%.

Influência da alimentação sobre os níveis de retinol no leite caprino

The caprine milk is a product of high biological value and high digestibility. Due to these characteristics it is quite used by newly born children that are not breastfed or that are intolerant to the bovine milk. The vitamin deficiency is a public health problem in underdeveloped areas as the Northeast of Brazil and where areas the caprine ones adapt very well. The present study was led to analyze the influence of the feeding in the vitamin levels in the caprine milk. The animals used were the races Saanen and Murciana, divided in three groups. The first group with 38 animals of race Saanen and the second with 30 animals of race Murciana were, fed with concentrated and voluminous. A third group with 20 animals of the race Saanen was fed exclusively with voluminous. The four group was added with 10. 000 UI of retinol palmitato, administered directly, like capsule, in the mouth of animal. Parallel it was verified the level of retinol of milk in the beginning and final of the sucked, in the goats of the second group (race Murciana n =30). The retinol of caprine milk was determined through the system of liquid cromatografia of high efficiency (HPLC). The retinol levels in the studied groups were respectively: first (38. 5 ± 12. 7 μg/100ml), second (40. 5 ± 9. 7 μg/100ml); third, with 20 animals of race Saanen fed exclusively with voluminous (23. 1 ± 6. 7 μg/100ml) and in the group a, suplementation with 10. 000 UI of retinol palmitato (43,7 ± 18,8 μg/100ml) before, and (61,9 ± 26,9 μg/100ml) after the supplementation. It was not found significant difference between the averages from animals of the first and second group, that were fed with the same concentrate diet and voluminous, showing that the retinol levels in the milk of these two races are equivalent. Already in the animals of the first and third group that they were fed with different diets, in those which diet was just voluminous, a drastic reduction was verified in the retinol levels. In relation to the retinol of the milk in different moments from the same sucked, it was observed in the beginning of the breast-feeding (22. 6 ± 9. 8 μg/100ml) and at the end of the sucked (49. 6 ± 14. 7μg/100ml), being the difference between the averages, statistically significant (p < 0,0001). Already in the animals that were supplemented, a significant increase was observed in the retinol concentration, being obtained a medium response of 41,85%

Construção, caracterização e aplicação de eletrodos para descarga por arco de cátodo oco

The system built to characterize electrodes and, consequently, deposited fine films are constituted by a hollow cathode that works to discharges and low pressures (approximately 10-3 to 5 mbar), a source DC (0 to 1200 V), a cylindrical camera of closed borossilicato for flanges of stainless steel with an association of vacuum bombs mechanical and spread. In the upper flange it is connected the system of hollow cathode, which possesses an entrance of gas and two entrances for its refrigeration, the same is electrically isolated of the rest of the equipment and it is polarized negatively. In front of the system of hollow cathode there is a movable sample in stainless steel with possibility of moving in the horizontal and vertical. In the vertical, the sample can vary its distance between 0 and 70 mm and, in the horizontal, can leave completely from the front of the hollow cathode. The sample and also the cathode hollow are equipped with cromel-alumel termopares with simultaneous reading of the temperatures during the time of treatment. In this work copper electrodes, bronze, titanium, iron, stainless steel, powder of titanium, powder of titanium and silício, glass and ceramic were used. The electrodes were investigated relating their geometry change and behavior of the plasma of the cavity of hollow cathode and channel of the gas. As the cavity of hollow cathode, the analyzed aspects were the diameter and depth. With the channel of the gas, we verified the diameter. In the two situations, we investigated parameters as flow of the gas, pressure, current and applied tension in the electrode, temperature, loss of mass of the electrode with relationship at the time of use. The flow of gas investigated in the electrodes it was fastened in a work strip from 15 to 6 sccm, the constant pressure of work was among 2.7 to 8 x 10-2 mbar. The applied current was among a strip of work from 0,8 to 0,4 A, and their respective tensions were in a strip from 400 to 220 V. Fixing the value of the current, it was possible to lift the curve of the behavior of the tension with the time of use. That curves esteem in that time of use of the electrode to its efficiency is maximum. The temperatures of the electrodes were in the dependence of that curves showing a maximum temperature when the tension was maximum, yet the measured temperatures in the samples showed to be sensitive the variation of the temperature in the electrodes. An accompaniment of the loss of mass of the electrode relating to its time of use showed that the electrodes that appeared the spherical cavities lost more mass in comparison with the electrodes in that didn't appear. That phenomenon is only seen for pressures of 10-2 mbar, in these conditions a plasma column is formed inside of the channel of the gas and in certain points it is concentrated in form of spheres. Those spherical cavities develop inside of the channel of the gas spreading during the whole extension of the channel of the gas. The used electrodes were cut after they could not be more used, however among those electrodes, films that were deposited in alternate times and the electrodes that were used to deposit films in same times, those films were deposited in the glass substrata, alumina, stainless steel 420, stainless steel 316, silício and steel M2. As the eletros used to deposit films in alternate time as the ones that they were used to deposit in same times, the behavior of the thickness of the film obeyed the curve of the tension with relationship the time of use of the electrode, that is, when the tension was maximum, the thickness of the film was also maximum and when the tension was minimum, the thickness was minimum and in the case where the value of the tension was constant, the thickness of the film tends to be constant. The fine films that were produced they had applications with nano stick, bio-compatibility, cellular growth, inhibition of bacterias, cut tool, metallic leagues, brasagem, pineapple fiber and ornamental. In those films it was investigated the thickness, the adherence and the uniformity characterized by sweeping electronic microscopy. Another technique developed to assist the production and characterization of the films produced in that work was the caloteste. It uses a sphere and abrasive to mark the sample with a cap impression, with that cap form it is possible to calculate the thickness of the film. Through the time of life of the cathode, it was possible to evaluate the rate of waste of its material for the different work conditions. Values of waste rate up to 3,2 x 10-6 g/s were verified. For a distance of the substratum of 11 mm, the deposited film was limited to a circular area of 22 mm diameter mm for high pressures and a circular area of 75 mm for pressure strip. The obtained films presented thickness around 2,1 µm, showing that the discharge of arch of hollow cathode in argon obeys a curve characteristic of the tension with the time of life of the eletrodo. The deposition rate obtained in this system it is of approximately 0,18 µm/min

Estudo comparativo da variação temporal da comunidade fitoplanctônica do açude Cruzeta inserido no bioma caatinga, Rio Grande do Norte

The Cruzeta impoundment, situated in the city of Cruzeta, hinterland of the state of the Rio Grande do Norte state has significant importance to the municipality as it represents the only source of supplying water to the region. It was hypothesized that the regional consequence of the global warming and the warming of surface water could substantially contribute the significant growth of the aquatic macrophytes in the years 2008-2009. The growth of these vegetation believed to be improved the degree of water transparency and as a consequence of the improved growth of phytoplankton species and chlorophyll biomass. At the same time the aquatic macrophyte could interact and compete potentially for the dissolved inorganic nutrients resources and the phytoplankton community. This study presents a comparison of years 2004-2005 when it did not have the expressive presence of the aquatic macrophyte community or restricted to the littoral region. In contrast, the years 2008-2009 showed a significant growth of the aquatic macrophyte in the Cruzeta/RN impoundments. The present study is an attempt to elucidate the significant presence of the aquatic macrophyte, Eichhornia crassipes, Ceratophyllum submersum, Nymphea sp and Pistia sp, and its interference on the ecology of phytoplankton. The samplings had been carried out from September of 2008 to April of 2009 and consistently between 10:00 h and 12:00 h with the aid of Van Dorn bottle and the plankton net of mesh size 20 Qm. The collections were made in three depths ie., surface, mid-column and bottom. The Physical-Chemical parameters such as pH, temperature, electrical conductivity and dissolved oxygen had been analyzed in situ. The samples for analysis of nutrients and chlorophyll were kept under refrigeration for posterior analysis in the laboratory. Phytoplankton samples were preserved in Lugol-iodine and kept for sedimentation for quali-quantitative analysis of phytoplankton. Enumeration of cells, colonies and filaments was done with the aid of Sedgwick-Rafter counting chamber and expressed as numbers/ml. Chlorophyll a was analyzed as a functional component of phytoplankton biomass and extracted with cold 90% acetone. The results indicate that the chlorophyll concentration varied between 5,65-8,08 Qg.L-1 for the dry period and 5,09-6,23 Qg.L-1 for the rainy period and showed considerable reduction when compared to the values to the 2004-2005 study period. The temperature was always presented higher in relation to the 2004-2005 study. Phytoplankton species showed a relative abundance of the Cyanophyceae for both the period of dry and rainy. The predominance species are filamentous Leptolymbya geophila Borzi (Planctolyngbya sp), Anabaena plankctônica Brunnthaler, Oscillatória limosa Ag. and Cylindrospermopsis raciborskii (Wolosz). The concentration of the nutrients such as nitrate and orto-phosfato had always presented higher values during the rainy period and the ammoniacal nitrogen retained moderate values in the dry period and a slight increase in rainy season. The main conclusions are the reduction of the concentration of chlorophyll, diversity of phytoplankton, and the increase in temperature and transparency of the water during the period of the study

Fator de decisão na adoção de um sistema de micro-cogeração de energia a gás natural :um estudo em Hotéis três estrelas

The natural gas perform a essential paper, not only in primary sectors of energy, but also in others sectors of economy. The use natural gas will have expansion in Brazil, motivated by governmental decision to increase the participation of this fuel in the Brazilian energy matrix from 4% to 12% up until 2010. in order to reach the objective related to increase the consumption of natural gas in the energy matrix and to propose solutions to attend the electric requirements of heart and refrigeration, using natural gas as primary power plant. This thesis has a main objective to analysis the perception of businessmen of hotel sector about the feasability of investment with micro-cogeneration system by natural gas in their hotel in turistic sector, in Natal/RN. It s show a case for the hotels selected analyzing the actual knowledge of businessmen about alternative of new technology in generation of owner energy. There was make a interview using a standard form researching information about this topic. In this interview has shown 4 (four) canaries for businessmen with different configurations of investment in micro-cogeneration. Two of this canaries uses the project finance like option to make fasible this projects. The resulteis showed who businessmen has insecurity to make decision to put in office alone, or with a local company, and perhaps with a national company to perform for a alternative energy system, justifying, the alone feasability and without information by local businessmen. Apart from that, they are receptive for a option to put in office in micro-cogeneration configured in the settings using project finance