Estudo termo-mecânico de interconector metálico recoberto com filme de La0,8Ca0,2CrO3 e de interconector cerâmico de La0,8Sr0,2Cr0,92Co0,08O3 para PaCOS

Doped lanthanum chromite ( LaCrO3 ) has been the most common material used as interconnect in solid oxide fuel cells for high temperature ( SOFC-HT ) that enabling the stack of SOFCs. The reduction of the operating temperature, to around 800 º C, of solid oxide fuel cells enabled the use of metallic interconnects as an alternative to ceramic LaCrO3, From the practical point of view, to be a strong candidate for interconnect the material must have good physical and mechanical properties such as resistance to oxidizing and reducing environments, easy manufacture and appropriate thermo-mechanical properties. Thus, a study on the physic-mechanical interconnects La0,8Sr0,2Cr0,92Co0,08O3 ceramics for SOFC -AT obtained by the method of combustion , as well as thermo-mechanical properties of metallic interconnects (AISI 444) covered with La0,8Ca0,2CrO3 by deposition technique by spray-pyrolysis fuel cells for intermediate temperature (IT-SOFCs). The La0,8Sr0,2Cr0,92Co0,08O3 was characterized by X -ray diffraction(XRD) , density and porosity , Vickers hardness (HV) , the flexural strength at room temperature and 900 °C and scanning electron microscopy (SEM). The X -ray diffraction confirmed the phase formation and LaCrO3 and CoCr2O4, in order 6 GPa hardness and mechanical strength at room temperature was 62 MPa ceramic Interconnector. The coated metal interconnects La0,8Ca0,2CrO3 passed the identification by XRD after deposition of the film after the oxidation test. The oxidative behavior showed increased resistance to oxidation of the metal substrate covered by La0,8Ca0,2CrO3 In flexural strength of the coated metal substrate, it was noticed only in the increased room temperature. The a SEM analysis proved the formation of Cr2O3 and (Cr,Mn)3O4 layers on metal substrate and confirmed the stability of the ceramic La0,8 Ca0,2CrO3 film after oxidative test

Campo e contracampo : o encontro com o outro no filme Lavoura Arcaica

This dissertation aims to comprehend how we meet with the other at cinema. For this, it receives the doubt, the uncertainty, the way that the human being is unfinished as stance of observation. It takes into consideration the multiples social vectors, historical, subjective, temporal and cultural which constitute these phenomena. The cinema is used as a cognitive resource in order to incorporate the poetic and the imaginary, making possible not forgetting gestures and knowledge that hatch from sounds, colours, remembrances, images, words, social exchanges, cognitive reciprocity that allow us to think about the culture, the society and the communication. For this, it has as theoretical prerequisites ideas of double (myselfthe other) and effective participation (projection-identification) developed by Edgar Morin, as well as the idea of communication as possibility/impossibility of constructions of bonds with the other through the body, our primary media, concepts developed by Harry Pross and Norval Baitello Jr. The chosen film to analysis is Lavoura Arcaica, it is an emblematic movie in the discussion of the human condition and in the relationship between the man and its body, its desires, with its nature/culture ambivalence. About this film are made reflections about the process of activation of the double (myself-the other) in the searching for the other through cinematographically elements of construction, as: montage, direction, screenplay, actors, scenography, costumes and soundtrack. In conclusion, the cinema, when it allows the effective participation and provides t e experiment of the double, becomes a gateway line in the path to development of the alterity

Memórias de um palhaço: O rito de passagem de Roger Avanzi para o palhaço Picolino II

This dissertaion reflects about life's trajectory of a specific clown: Roger Avanzi, who gives animus to the clown Picolino II. The main objective is to promove reflections about the insertion of the clowns in the universe of the circus, to make us comprehend the process of formation of a clown formed in a traditional circus family. In this research, we begin of the conjecture that, through the individual memory we can think about rebuild the process of a professional's integral formation.Then, we trace the itinerary of Roger Avanzi, the clown Picolino II, think that it has possibilities, in this case, to discuss about what is a clown's formation when it come from a traditional circus family. To walk on this universe, a huge numer of authors that deeply studyed about the circus ans the clowns, like: Avanzi; Tamaoki (2004), Bolognesi (2003), Castro (2005), Pantano (2007), Ruiz (1987), Silva (1997) e Torres (1998). We bring then, a theoric base that certainly, fortifies and corroborates our thoughts and reflections about the universe of circus and the trajectory of clown's formation, with special atention to Roger Avanzi, fundamentals i studies about it and with memories like Halbwachs's (2004) and Bosi's (1994). The reflections enabled to conclude that a clown doesn't born done; it becomes in the cultural trajectory, in which all the human are inserted

A interculturalidade no cinema: um estudo da legendagem e da dublagem brasileiras em um filme francês contemporâneo

In this research we present a study of cultural aspects in dubbed and subtitled films. As a case study, we chose to compare the original French version of "Le fabuleux destin d'Amelie Poulain" with both the subtitled and the dubbed versions in Portuguese, with focus on the interaction between the French and the Brazilian cultures. First we considered that (i) the translation process interferes on the perception of cultural relationships; and that (ii) dubbing and subtitling are two methods of translation that result in distinct perceptions from the spectator. Then, we adopted the translation interpretative theory (Seleskovicth; Lederer, 2001; Deslile, 1980) as the general theoretical framework, since it emphasizes the extralinguistic equivalence on the translation process. Furthermore, we based this research on three analytical procedures, which are: the four-step translating operation, the contrastive perception and a translation's typology based on Vinay and Dalbernet's linguistic procedures (Srpová, 1991, 1995, 2004). We extracted forty-six culture-related elements from the film and identified those belonging to the French ethno-universe. Then, the elements were classified with respect to a theoretical typology, based on concepts found in the Ethnography of Communication and a general typology, based on five general thematic groups, defined by the corpus. The results showed that both Brazilian versions tend to preserve those culture-related elements by using lexical loan and literal translation. The visual context, in its association with the linguistic procedures in both Brazilian versions, was also observed as an important element to the comprehension of the culture-related elements as they are considered in the French culture. As a general observation, the perception of culture-related elements in the film seems effectively be oriented by the translation methods

Simulação da destilação molecular de filme descendente para o petróleo

The heavy part of the oil can be used for numerous purposes, e.g. to obtain lubricating oils. In this context, many researchers have been studying alternatives such separation of crude oil components, among which may be mentioned molecular distillation. Molecular distillation is a forced evaporation technique different from other conventional processes in the literature. This process can be classified as a special distillation case under high vacuum with pressures that reach extremely low ranges of the order of 0.1 Pascal. The evaporation and condensation surfaces must have a distance from each other of the magnitude order of mean free path of the evaporated molecules, that is, molecules evaporated easily reach the condenser, because they find a route without obstacles, what is desirable. Thus, the main contribution of this work is the simulation of the falling-film molecular distillation for crude oil mixtures. The crude oil was characterized using UniSim® Design and R430 Aspen HYSYS® V8.5. The results of this characterization were performed in spreadsheets of Microsoft® Excel®, calculations of the physicochemical properties of the waste of an oil sample, i.e., thermodynamic and transport. Based on this estimated properties and boundary conditions suggested by the literature, equations of temperature and concentration profiles were resolved through the implicit finite difference method using the programming language Visual Basic® (VBA) for Excel®. The result of the temperature profile showed consistent with the reproduced by literature, having in their initial values a slight distortion as a result of the nature of the studied oil is lighter than the literature, since the results of the concentration profiles were effective allowing realize that the concentration of the more volatile decreases and of the less volatile increases due to the length of the evaporator. According to the transport phenomena present in the process, the velocity profile tends to increase to a peak and then decreases, and the film thickness decreases, both as a function of the evaporator length. It is concluded that the simulation code in Visual Basic® language (VBA) is a final product of the work that allows application to molecular distillation of petroleum and other similar mixtures.

Estudo termo-mecânico de interconector metálico recoberto com filme de La0,8Ca0,2CrO3 e de interconector cerâmico de La0,8Sr0,2Cr0,92Co0,08O3 para PaCOS

Doped lanthanum chromite ( LaCrO3 ) has been the most common material used as interconnect in solid oxide fuel cells for high temperature ( SOFC-HT ) that enabling the stack of SOFCs. The reduction of the operating temperature, to around 800 º C, of solid oxide fuel cells enabled the use of metallic interconnects as an alternative to ceramic LaCrO3, From the practical point of view, to be a strong candidate for interconnect the material must have good physical and mechanical properties such as resistance to oxidizing and reducing environments, easy manufacture and appropriate thermo-mechanical properties. Thus, a study on the physic-mechanical interconnects La0,8Sr0,2Cr0,92Co0,08O3 ceramics for SOFC -AT obtained by the method of combustion , as well as thermo-mechanical properties of metallic interconnects (AISI 444) covered with La0,8Ca0,2CrO3 by deposition technique by spray-pyrolysis fuel cells for intermediate temperature (IT-SOFCs). The La0,8Sr0,2Cr0,92Co0,08O3 was characterized by X -ray diffraction(XRD) , density and porosity , Vickers hardness (HV) , the flexural strength at room temperature and 900 °C and scanning electron microscopy (SEM). The X -ray diffraction confirmed the phase formation and LaCrO3 and CoCr2O4, in order 6 GPa hardness and mechanical strength at room temperature was 62 MPa ceramic Interconnector. The coated metal interconnects La0,8Ca0,2CrO3 passed the identification by XRD after deposition of the film after the oxidation test. The oxidative behavior showed increased resistance to oxidation of the metal substrate covered by La0,8Ca0,2CrO3 In flexural strength of the coated metal substrate, it was noticed only in the increased room temperature. The a SEM analysis proved the formation of Cr2O3 and (Cr,Mn)3O4 layers on metal substrate and confirmed the stability of the ceramic La0,8 Ca0,2CrO3 film after oxidative test