A influência da adição de caulim, quartzo e feldspato potássico na formulação de massas cerâmicas para telhas: Modelo estatístico

The production of roof tiles in the state of Rio Grande do Norte accounts for around 60% of the total of ceramic pieces produced. There is a need for investment to improve quality and productivity, thereby promoting technological innovations. Accordingly, the aim of this study is to determine the effect of kaolin, potassium feldspar and quartz in two standard formulations, as well as the effect of sintering temperature on the technological properties of linear firing shrinkage, water absorption and bending rupture stress, by fitting the statistical model and using multiple linear regression to assess the relationship between technological properties and independent variables. The raw materials were characterized using the following techniques: X-ray fluorescence (XRF), X-ray diffraction (XRF), rational analysis (RA), differential thermal analysis (DTA) and granulometric analysis (GA). The test specimens were compacted by uniaxial pressure (25 MPa), dried in a stove at 110 ºC for 24 hours and sinterized at 850 ºC, 950 ºC and 1050 ºC and held isothermal for 30 minutes. The results obtained indicate that the addition of kaolin to two standard formulations (M and R) promoted a reduction in water absorption values and an increase in bending rupture stress values. The sintering temperatures for group M that resulted in the lowest linear firing shrinkage and water absorption values were 850 ºC and 950 ºC, respectively, and the highest bending rupture stress values were reached at a temperature of 950 ºC. In the case of group R, the sintering temperature that obtained the lowest water absorption and linear firing shrinkage values was 850 ºC, and the highest bending rupture stress values were attained at a temperature of 1050 ºC. This work explains the statistical approach used to fit the model that describes the relationship between the technological properties and percentage of kaolin, quartz and feldspar, as well as the models that enable predictions, provided that the lower and upper limits of the percentage of clay minerals, flux and quartz used in this study are respected. Statistica 6 software was used and results were obtained by stepwise forward regression

Motivação e satisfação à luz do modelo ASH: estudo de caso em indústria de alimentos

Neste estudo, foram examinadas as relações existentes entre a motivação e a satisfação do trabalhador no espaço laboral. O estudo empírico foi conduzido em uma única etapa, por meio da qual buscou-se conhecer as dimensões latentes identificadas e, a partir das dimensões validadas, buscou-se estabelecer relações com características motivacionais, como antecedentes, e satisfação pelo trabalho realizado, como conseqüência do atendimento das necessidades manifestadas pelo trabalhador. Foram entrevistados 38 (trinta e oito) funcionários da empresa Água Mineral Cristalina, incluindo-se os que ocupam cargos de chefia. Como instrumento de coleta de dados, foi utilizada parte do complexo da Auditoria do Sistema Humano ASH, criado por Quijano (1999), que se trata de um modelo de pesquisa na área de Psicologia Social, incluindo a Administração de Recursos Humanos, que analisa os processos psicológicos e psicossociais nas organizações. Para esta pesquisa, foram utilizados dois formulários sugeridos pelo autor citado, (anexos 01 e 02). O primeiro denomina-se condições para a motivação , com 15 (quinze) questões do tipo likert. O segundo, "trabalho bem feito e satisfação de necessidades", tem 22 (vinte e duas) questões, também do tipo likert. O instrumento foi respondido por colaboradores, independente da posição hierárquica, em aproximadamente 10 (dez) a 15 (quinze) minutos. A aplicação foi realizada diretamente pelo pesquisador nas unidades de produção e de administração da empresa. Por meio de modelagem de equações estruturais, foi estabelecido um modelo de relações causais entre as dimensões latentes relacionadas à motivação e o desempenho do empregado quando tem satisfeitas as suas necessidades. Quanto ao tratamento dos dados, este ocorreu de forma quantitativa. Quanto à análise, aconteceu após os dados terem sido tratados. Nesta pesquisa, os dados foram analisados por meio de estatísticas descritivas, atualizando-se os recursos de softwares específicos como Statistic ou SPSS Statistic Package for Social Sciences. Usou-se a técnica de Análise de Regressão, na qual foi utilizado o método STEPWISE que inclui na equação de explicação de uma variável dependente somente aquelas que auxiliam ou incrementam sua explicação. Como variáveis dependentes, foram utilizadas as variáveis do formulário "trabalho bem feito e satisfação de necessidades" e como variável independe as variáveis do questionário "condições para motivação". Sob o ponto de vista prático, este estudo mostrou que um determinado conjunto de características motivacionais influi positivamente na satisfação do trabalhador, que poderá realizar um trabalho bem feito; do lado teórico, a pesquisa verificou explicitamente a hipótese de que os aspectos motivacionais contribuem para que o empregado, sentindo-se satisfeito, desempenhe melhor as atribuições que lhe são conferidas

Modelos matemáticos para estimativa do consumo máximo de oxigênio pela ventilometria de esforço em indivíduos saudáveis

The relation between metabolic demand and maximal oxygen consumption during exercise have been investigated in different areas of knowledge. In the health field, the determination of maximal oxygen consumption (VO2max) is considered a method to classify the level of physical fitness or the risk of cardiocirculatory diseases. The accuracy to obtain data provides a better evaluation of functional responses and allows a reduction in the error margin at the moment of risk classification, as well as, at the moment of determination of aerobic exercise work load. In Brasil, the use of respirometry associated to ergometric test became an opition in the cardiorespiratory evaluation. This equipment allows predictions concerning the oxyredutase process, making it possible to identify physiological responses to physical effort as the respiratory threshold. This thesis focused in the development of mathematical models developed by multiple regression validated by the stepwise method, aiming to predict the VO2max based on respiratory responses to physical effort. The sample was composed of a ramdom sample of 181 healthy individuals, men and women, that were randomized to two groups: regression group and cross validation group (GV). The voluntiars were submitted to a incremental treadmill test; objetiving to determinate of the second respiratory threshold (LVII) and the Peak VO2max. Using the método forward addition method 11 models of VO2max prediction in trendmill were developded. No significative differences were found between the VO2max meansured and the predicted by models when they were compared using ANOVA One-Way and the Post Hoc test of Turkey. We concluded that the developed mathematical models allow a prediction of the VO2max of healthy young individuals based on the LVII

Análise dos indicadores de qualidade versus taxa de abandono utilizando método de regressão múltipla para serviço de banda larga

Telecommunication is one of the most dynamic and strategic areas in the world. Many technological innovations has modified the way information is exchanged. Information and knowledge are now shared in networks. Broadband Internet is the new way of sharing contents and information. This dissertation deals with performance indicators related to maintenance services of telecommunications networks and uses models of multivariate regression to estimate churn, which is the loss of customers to other companies. In a competitive environment, telecommunications companies have devised strategies to minimize the loss of customers. Loosing customers presents a higher cost than obtaining new ones. Corporations have plenty of data stored in a diversity of databases. Usually the data are not explored properly. This work uses the Knowledge Discovery in Databases (KDD) to establish rules and new models to explain how churn, as a dependent variable, are related to a diversity of service indicators, such as time to deploy the service (in hours), time to repair (in hours), and so on. Extraction of meaningful knowledge is, in many cases, a challenge. Models were tested and statistically analyzed. The work also shows results that allows the analysis and identification of which quality services indicators influence the churn. Actions are also proposed to solve, at least in part, this problem

Avaliação da capacidade de caminhar do portador de obesidade mórbida utilizando teste de caminhada de 6 minutos

Introduction: The ability to walk is impaired in obese by anthropometric factors (BMI and height), musculoskeletal pain and level of inactivity. Little is known about the influence of body adiposity and the acute response of the cardiovascular system during whole the 6-minute walk test (6mWT). Objective: To evaluate the effect of anthropometric measures (BMI and WHR waist-to-hip ratio), the effort heart and inactivity in ability to walk the morbidly obese. Materials and Methods: a total 36 morbidly obese (36.23 + 11.82 years old, BMI 49.16 kg/m2) were recruited from outpatient department of treatment of obesity and bariatric surgery in University Hospital Onofre Lopes and anthropometric measurements of obesity (BMI and WHR), pulmonary function, pattern habitual physical activity (Baecke Questionnaire) and walking capacity (6mWT). The patient was checking to measure: heart rate (HR), breathing frequency (BF), peripheral oxygen saturation, level of perceived exertion, systemic arterial pressure and duplo-produto (DP), moreover the average speed development and total distance walking. The data were analysed between gender and pattern of body adiposity, measuring the behavior minute by minute of walking. The Pearson and Spearmam correlation coefficients were calculated, and stepwise multiple Regression examined the predictors of walking capacity. All analyses were performed en software Statistic 6.0. Results: 20 obese patients had abdominal adiposity (WHR = 1.01), waist circumference was 135.8 cm in women (25) and 139.8 cm in men (10). Walked to the end of 6mWT 412.43 m, with no differences between gender and adiposity. The total distance walked by obesity alone was explained by BMI (45%), HR in the sixth minute (43%), the Baecke (24%) and fatigue (-23%). 88.6% of obese (31) performed the test above 60% of maximal HR, while the peak HR achieved at 5-minute of 6mWT. Systemic arterial pressure and DP rised after walking, but with no differences between gender and adiposity. Conclusion: The walk of obese didn´t suffers influence of gender or the pattern of body adiposity. The final distance walked is attributed to excess body weight, stress heart, the feeling of effort required by physical activity and level of sedentary to obese. With a minute of walking, the obeses achieved a range of intensity cardiovascular trainning

Equações preditivas para as pressões respiratórias máximas de crianças brasileiras

I ntroduction: The assessment of respiratory muscle strength is important in the diagnosis and monitoring of the respiratory muscles weakness of respiratory and neuromuscular diseases. However, there are still no studies that provide predictive equations and reference values for maximal respiratory pressures for children in our population. Aim: The purpose of this study was to propose predictive equations for maximal respiratory pressures in healthy school children. Method: This is an observational cross-sectional study. 144 healthy children were assessed. They were students from public and private schools in the city of Natal /RN (63 boys and 81 girls), subdivided in age groups of 7-8 and 9-11 years. The students presented the BMI, for age and sex, between 5 and 85 percentile. Maximal respiratory pressures were measured with the digital manometer MVD300 (Globalmed ®). The maximal inspiratory pressure (MIP) and maximal expiratory pressures (MEP) were measured from residual volume and total lung capacity, respectively. The data were analyzed using the SPSS Statistics 15.0 software (Statistical Package for Social Science) by assigning the significance level of 5%. Descriptive analysis was expressed as mean and standard deviation. T'Student test was used for unpaired comparison of averages of the variables. The comparison of measurements obtained with the predicted values in previous studies was performed using the paired t'Student test. The Pearson correlation test was used to verify the correlation of MRP's with the independent variables (age, sex, weight and height). For the equations analysis the stepwise linear regression was used. Results: By analyzing the data, we observed that in the age range studied MIP was significantly higher in boys. The MEP did not differ between boys and girls aged 7 to 8 years, the reverse occurred in the age between 9 and 11 years. The boys had a significant increase in respiratory muscle strength with advancing age. Regardless sex and age, MEP was always higher than the MIP. The reference values found in this study are similar to a sample of Spanish and Canadian children. The two models proposed in previous studies with children from other countries were not able to consistently predict the values observed in this studied population. The variables sex, age and weight correlated with MIP, whereas the MEP was also correlated with height. However, in the regression models proposed in this study, only gender and age were kept exerting influence on the variability of maximal inspiratory and expiratory pressures. Conclusion: This study provides reference values, lower limits of normality and proposes two models that allow predicting, through the independent variables, sex and age, the value of maximal static respiratory pressures in healthy children aged between 7 and 11 years old

Equacões preditivas para as pressões respiratórias estáticas máximas de adolescentes brasileiros

Introduction: The reference values and prediction equations for maximal respiratory pressures (MRP) differ significantly between the available studies. This large discrepancy can be attributed to the different methodologies proposed. Although the importance of MRP is widely recognized, there are no Brazilian studies that provide predictive equations and reference values for PRM adolescents. Objectives: The purpose of this study was to provide normal values and propose predictive equations for maximal static respiratory pressures of Brazilian adolescents. Methods: An observational cross-sectional study, which evaluated 182 adolescents of both sexes aged between 12 and 18 years, enrolled in schools of the state and private in the city of Natal / RN. The selection of schools and participants of the study was randomly through a lottery system. The spirometric evaluation was performed through the digital spirometer One Flow FVC prior to the assessment of respiratory muscle strength. The MICs were measured with MVD digital manometer 300. Statistical analysis was performed using the SPSS 17.0 software STATISTICS, assigning the significance level of 5%. The normality of data distribution was verified using the Kolmogorov-Smirnov (KS). The descriptive analysis was expressed as mean and standard deviation. We used one-way ANOVA test to verify the difference of the averages of MRPs between age and gender and comparing the averages of MRPs between levels of physical activity. The test t'Student unpaired compared the averages of MRPs being ages and sexes. The comparison of mean values obtained in this study PRM with the values predicted using the equations mentioned above was relizada by testing paired t'Student. To verify the correlation between the PRM and the independent variables (age, weight, height) was used Pearson correlation test. Levene's test evaluated the homogeneity of variance. To obtain predictive equations analysis was used stepwise multiple linear regression. Results: There was no significant difference in mean age between the PRM. The male adolescents, regardless of age, showed superiority in MRP values when compared to the opposite sex. Weight, height and sex correlated with the PRM. Regression analysis suggested in this study, pointed out that the weight and sex had an influence in MIP and MEP only in relation to sex influenced. The mean for each PRM adolescents classified as very active were superior to those observed in adolescents classified as irregularly active. Conclusion: This study provides reference values and two models of predictive equations for maximal inspiratory and expiratory pressures, and to establish the lower limits of normality that will serve as an indispensable condition for careful evaluation of respiratory muscle strength in Brazilian adolescents

Avaliação de lesões brancas de cáries: um estudo de prognóstico

Objective: The aim of the present study is to assess the current situation of white enamel lesions on vestibular surfaces of permanent upper incisors, diagnosed 6 years ago, without clinical intervention. Methods: A prospective study reassessed 53 students of both sexes, aged between 13 and 18 years old, all attending the public school system in Natal, Brazil. Data collection was performed by duly calibrated examiners, and a clinical chart consisting of demographic data on dental caries, oral hygiene, and gingival condition was prepared. A tactile-visual examination was conducted using a clinical mirror and periodontal probe. Data compilation and analysis were carried out using a SPSS software. In this analysis the chi-squared test was used for qualitative independent variables. To identify the net effect of treatment, multiple logistic analysis with forward stepwise model selection was performed. Results: The final sample was composed of 106 lesions in the 53 individuals, with mean age of 15.02 years, visible plaque index (VPI) of 23.34%, and gingival blood indices (GBI) of 25.92%. A statistically significant relationship (p = 0.003) was found between initial DMFS and prognosis of white enamel lesion. Conclusions: We observed that past caries experience and dental plaque were the main predictive factors for negative lesion outcomes, demonstrating the need for oral hygiene control through continuing preventive measures

Prevalência de incontinência urinária e fatores associados em idosos institucionalizados

Urinary incontinence (UI) is a geriatric syndrome that is especially prevalent in institutionalized individuals, and that causes economic and social impacts derived from treatment costs and overload of caregiver. UI also entails physical consequences to the health of the elderly, such as urinary tract infections or pressure ulcers, among other health problems. However, the existing national research on this condition is still scarce and comprises serious methodological biases. Therefore, the objective of this study is to determine the prevalence of urinary incontinence and associated factors in institutionalized elderly. A cross-sectional study is presented herein, conducted between October and December, 2013 and carried out in 10 nursing homes in the city of Natal (Northeast Brazil). UI was verified through the program Minimum Data Set version 3.0, which was also used to assess fecal incontinence, urinary devices and UI control programs. Data collection included sociodemographic information, UI characterization, as well as variables related to the institution itself and to health conditions (comorbidities, medication, pelvic floor surgery, Barthel Index for functional capacity and Pfeiffer test for cognitive status). Bivariate analysis was performed using the Chi-Square Test (or Fisher‟s Exact Test) and the Linear Chi-Square Test, calculating the prevalence ratio with 95% confidence interval. Variables with p value under 0.20 were included in the multivariate analysis, which was performed using the Stepwise Forward logistic regression. The inclusion of variables in the final model depended on the likelihood ratio test, absence of multicollinearity and on the Hosmer-Lemeshow test. A statistical significance level of 0.05 was considered. Six (1.8%) hospitalized elderly, one individual in palliative care (0.3%) and one (0.3%) individual under the age of 60 were excluded from the study. The final sample consisted of 321 elderly, mostly females, with a mean age of 81.5 years. The prevalence of UI was 59.43% and the final model revealed statistically a significant association between UI and white race, physical inactivity, stroke, mobility constraints and cognitive decline. The most frequent UI type was functional UI due to physical or cognitive disability, and incontinence control measures were applied only to a minority of residents (approximately 8%). It is concluded that UI is a health issue that affects more than half of the institutionalized elderly, and is associated with white race, physical inactivity, stroke and other geriatric syndromes such as immobility and cognitive disability. Most of these associated factors are modifiable and therefore the findings of this study highlight the importance of UI prevention and treatment in nursing homes, which include general measures, such as physical and psychosocial activities, and specific measures, such as prompted voiding

Uma ferramenta de análise automatizada de técnicas de seleção de testes de regressão baseada em mineração de repositórios de software

The main goal of Regression Test (RT) is to reuse the test suite of the latest version of a software in its current version, in order to maximize the value of the tests already developed and ensure that old features continue working after the new changes. Even with reuse, it is common that not all tests need to be executed again. Because of that, it is encouraged to use Regression Tests Selection (RTS) techniques, which aims to select from all tests, only those that reveal faults, this reduces costs and makes this an interesting practice for the testing teams. Several recent research works evaluate the quality of the selections performed by RTS techniques, identifying which one presents the best results, measured by metrics such as inclusion and precision. The RTS techniques should seek in the System Under Test (SUT) for tests that reveal faults. However, because this is a problem without a viable solution, they alternatively seek for tests that reveal changes, where faults may occur. Nevertheless, these changes may modify the execution flow of the algorithm itself, leading some tests no longer exercise the same stretch. In this context, this dissertation investigates whether changes performed in a SUT would affect the quality of the selection of tests performed by an RTS, if so, which features the changes present which cause errors, leading the RTS to include or exclude tests wrongly. For this purpose, a tool was developed using the Java language to automate the measurement of inclusion and precision averages achieved by a regression test selection technique for a particular feature of change. In order to validate this tool, an empirical study was conducted to evaluate the RTS technique Pythia, based on textual differencing, on a large web information system, analyzing the feature of types of tasks performed to evolve the SUT

Avaliação da pressão inspiratória nasal sniff na população obesa

Introdução: a avaliação da pressão inspiratória nasal (SNIP) é considerada uma manobra complementar da Pressão Inspiratória Máxima estática (PImax) em várias condições clínicas, porém não há relatos na obesidade. Por outro lado, a obesidade tem um importante impacto nos músculos respiratórios especialmente com maiores gordura abdominal o que provavelmente pode ser detectado na avaliação da SNIP que mensura mais precisamente a pressão diafragmática. Objetivo: analisar em obesos a relação entre SNIP e variáveis respiratórias e marcadores de adiposidade. Material e Método: num estudo transversal um total de 92 obesos (38.3±10.2 anos) sem história de doença respiratória ou cardíaca diagnosticada. Foram avaliados na espirometria (capacidade vital forçada-CVF; volume expiratório forçado no primeiro segundo-VEF1; volume de reserva expiratório-VRE) e pressões respiratórias estática (PImax, PEmax e SNIP) e dinâmica (ventilação voluntária máxima-VVM). Sendo considerados os marcadores de adiposidade: índice de adiposidade corporal-IAC; índice de massa corporal-IMC e circunferências do quadril (CQ), cintura (CC) e pescoço (CP). Resultados: 65 obesos mórbidos (IMC=50.8±8.1Kg/m2) e 27 obesos não mórbidos (IMC=35.6±2.7Kg/m2) foram homogêneos (p>0.05) na SNIP (99.1±24.5cmH2O, 87% do predito) e PImax (107.3±26.4cmH2O, 109% do predito). Existe correlação (r=0.5) entre SNIP e PImax somente no grupo de obesos mórbidos. De acordo com as correlações houve associação entre variáveis respiratórias (CVF r=0.48; VEF1 r=0.54; e VVM r=0.54), valores antropométricos (idade r=-0.44) e SNIP somente para os obesos mórbidos. Esses achados foram certificados quando também comparados a quantidade de gordura ao redor do pescoço (CP≥43cm). O modelo de regressão linear stepwise mostrou que a VVM parece ser o melhor preditor para explicar a SNIP nos obesos mórbidos. Nestes obesos a SNIP foi levemente mais baixa (87%predito) que os valores esperados para indivíduos brasileiros saudáveis. Conclusão: em obesos mórbidos a SNIP é moderadamente relacionada a PImax. A SNIP parece ser mais relacionada a VVM que à marcadores de adiposidade.

Motivação e satisfação à luz do modelo ASH: estudo de caso em indústria de alimentos

Neste estudo, foram examinadas as relações existentes entre a motivação e a satisfação do trabalhador no espaço laboral. O estudo empírico foi conduzido em uma única etapa, por meio da qual buscou-se conhecer as dimensões latentes identificadas e, a partir das dimensões validadas, buscou-se estabelecer relações com características motivacionais, como antecedentes, e satisfação pelo trabalho realizado, como conseqüência do atendimento das necessidades manifestadas pelo trabalhador. Foram entrevistados 38 (trinta e oito) funcionários da empresa Água Mineral Cristalina, incluindo-se os que ocupam cargos de chefia. Como instrumento de coleta de dados, foi utilizada parte do complexo da Auditoria do Sistema Humano ASH, criado por Quijano (1999), que se trata de um modelo de pesquisa na área de Psicologia Social, incluindo a Administração de Recursos Humanos, que analisa os processos psicológicos e psicossociais nas organizações. Para esta pesquisa, foram utilizados dois formulários sugeridos pelo autor citado, (anexos 01 e 02). O primeiro denomina-se condições para a motivação , com 15 (quinze) questões do tipo likert. O segundo, "trabalho bem feito e satisfação de necessidades", tem 22 (vinte e duas) questões, também do tipo likert. O instrumento foi respondido por colaboradores, independente da posição hierárquica, em aproximadamente 10 (dez) a 15 (quinze) minutos. A aplicação foi realizada diretamente pelo pesquisador nas unidades de produção e de administração da empresa. Por meio de modelagem de equações estruturais, foi estabelecido um modelo de relações causais entre as dimensões latentes relacionadas à motivação e o desempenho do empregado quando tem satisfeitas as suas necessidades. Quanto ao tratamento dos dados, este ocorreu de forma quantitativa. Quanto à análise, aconteceu após os dados terem sido tratados. Nesta pesquisa, os dados foram analisados por meio de estatísticas descritivas, atualizando-se os recursos de softwares específicos como Statistic ou SPSS Statistic Package for Social Sciences. Usou-se a técnica de Análise de Regressão, na qual foi utilizado o método STEPWISE que inclui na equação de explicação de uma variável dependente somente aquelas que auxiliam ou incrementam sua explicação. Como variáveis dependentes, foram utilizadas as variáveis do formulário "trabalho bem feito e satisfação de necessidades" e como variável independe as variáveis do questionário "condições para motivação". Sob o ponto de vista prático, este estudo mostrou que um determinado conjunto de características motivacionais influi positivamente na satisfação do trabalhador, que poderá realizar um trabalho bem feito; do lado teórico, a pesquisa verificou explicitamente a hipótese de que os aspectos motivacionais contribuem para que o empregado, sentindo-se satisfeito, desempenhe melhor as atribuições que lhe são conferidas