Influência da adição de resíduo de caulim nas propriedades tecnológicas de uma massa padrão de porcelanato produzido em escala industrial

VARELA, M. L. et al. Influência da adição de resíduo de caulim nas propriedades tecnológicas de uma massa padrão de porcelanato produzido em escala industrial. Cerâmica, v.55, n.334 p.209-215. 2009.ISSN 0366-6913.Disponível em: . Acesso em: 06 out. 2010.

Efeito da adição de feldspato e/ou resíduo de caulin em formulações à base de argila ilítica

The red pottery industry in Piauí state is well developed and stands out at the national context for the technical quality of its products. The floor and wall tile industry, however, is little developed since the state has only one company that produces red clay-based ceramic tiles. This thesis aims at using the predominantly illitic basic mass of the above mentioned industry, with the addition of feldspar and/or kaolin residue in order to obtain products of higher technical quality. Kaolin residue consists basically of kaolinite, muscovite mica and quartz; the feldspar used was potassic. In this experiment, basic mass (MB) was used for experimental control and fifteen formulations codified as follows: F2, F4, F8, F16, F32, FR2, FR4, FR8, FR16, FR32, R2, R4, R8, R16 and R32. All raw materials were dry-milled, classified, formulated and then humidified to 10% water. Thereafter, test samples were produced by unixial pressing process in a rectangular steel matrix (60.0 x 20.0 x 5.0) mm3 at (25 MPa). They were fired at four temperatures: 1080°C, 1120°C, 1160°C, with a heating rate of 10°C/min during up to 10 min in an electric oven, and the last one in an industrial oven with a peak of 1140°C, aim ing to confirm the results found in laboratory and, finally, technological tests were performed: MEA, RL, AA, PA, TRF and PF. The results revealed that the residue under study can be considered a raw material with large potential in the industry of red clay-based ceramic tiles, since the results found both in laboratory and in the industry have shown that the test samples produced from the formulations with up to 4% feldspar and those produced with up to 8% feldspar and residue permitted a reduction in the water absorption rate and an increase in the mechanical resistance while those samples produced with up to 4% residue had an increase in the mechanical resistance when compared to those produced from the basic mass and that the formulation with 2% feldspar and residue presented the best technological properties, lowering the sintering temperature down to 1120°C

Efeito da tecnologia de microondas nas propriedades tecnológicas dos componentes de cerâmica estrutural

O processamento térmico de materiais cerâmicos via energia de microondas, no estágio atual, vem ganhando cada dia mais importância, tendo em vista suas inúmeras aplicações, como por exemplo: aplicação de microondas na área de processamento mineral (aquecimento de minérios antes da moagem, secagem, redução carbotérmica de óxidos minerais, lixiviação, fusão, pré-tratamento de minérios e concentrados de ouro refratário, regeneração de carvão, etc. de acordo com Kigman & Rowson, 1998). Em virtude de uma série de vantagens em potencial, frente aos métodos convencionais de aquecimento, como redução no tempo de processamento; economia de energia; diminuição do diâmetro médio das partículas e melhoramento nas propriedades tecnológicas em geral, esta tecnologia vem se destacando. Neste contexto, o objetivo geral deste trabalho, é desenvolver uma pesquisa visando identificar e caracterizar novas opções de matérias-primas cerâmicas como argilas, feldspatos e caulins que sejam eficazes para definir a formulação de uma ou mais massas para produção de componentes de cerâmica estrutural com propriedades físicas, mecânicas e estéticas adequadas após passarem por sinterização convencional e por energia de microondas destacando as vantagens desta última. Além dos requisitos técnicos e de processo, as formulações apresentadas deverão atender às expectativas de preço e de logística de fornecimento. No estudo foram conformados corpos-de-prova por extrusão e prensagem, sinterizados em fornos microondas e convencional, sob ciclos de queima mais rápidos que os atualmente praticados. As matérias-primas foram caracterizadas e analisadas, utilizando as técnicas de fluorescência por raios X (FRX), difração por raios X (DRX), análise térmica diferencial (DTA), análise térmica gravimétrica (DTG), análise granulométrica (AG), microscopia eletrônica de varredura (MEV), absorção d agua (AA), massa especifica aparente (MEA), porosidade aparente (PA), retração linear (RL) e tensão de ruptura e flexão (TRF). Os resultados obtidos indicaram que as propriedades tecnológicas de Absorção de água (AA) e Tensão de Ruptura e flexão (TRF), proposto no trabalho foram adquiridos com sucesso e estão bem além do limite exigido pelas especificações das normas da ABNT NBR 15.270/05 e 15.310/09

Voleibol infanto-juvenil brasileiro: Somatotipia, qualidades físicas e marcadores genéticos dos atletas em diferentes níveis de qualificação esportiva

The elaboration of profiles with characteristics that can be parameters in the different categories of sports modalities and the investment in scientific studies have revealed a significant importance in the development of new generations of athletes. Based in the exposed, the purpose of this study was to identify and compare the somatotype characteristics, physical qualities and genetic markers of Brazilian male volleyball players in the 14-17 category playing at different levels (international, national and regional). We used a scale, stadiometer, pachymeter, and adipometer to evaluate somatotype, attack and block reach test, medicine ball toss, 30-meter agility test , the AAHPER -30 test to evaluate basic physical qualities and the dermatoglyphic method to identify genetic markers. The results show the superiority of the national team over the other squads in the somatotype component (ectomorphy), and in the level of basic physical qualities. We found no significant difference in genetic markers among the teams studied. We conclude that Brazilian volleyball players at different performance levels have characteristics peculiar to the sport, with height and physical qualities being significantly different among these teams. The results confirm de necessity of knowing the athletes specific characteristics when dealing with high performance teams using nutrition, medicine, physiology and genetics specific knowledges to achieve a better sportive development

Marcas dermatoglíficas, Antropometria e as qualidades físicas básicas dos escolares da rede municipal da cidade de Manaus

The objective of this study of comparative descriptive character went aimed at to analyze the characteristics dermatoglyphics, anthropometrics and the basic physical qualities, in 180 selected scholars in a stratified way, distributed like this: 10 year-old boys = 32; 09 years = 32; 08 years = 32; 10 year-old girls = 28; 09 years = 28; 08 years = 28), studying the fundamental teaching of the School Good Municipal Hope, located in the area east, in the Neighborhood of the Crowned, in the city of Manaus, Amazon. For identification of the dermatoglyphics characteristics collected, was the fingerprints; for evaluation of the corporal mass, height and IMC, they were used a digital scale with an estadiometer of the mark Filizola. The tests: to sit down and to reach flexibility); Horizontal Impulse or I jump in distance stopped (force of inferior members); Flex and extension of the trunk (it Forces abdominal); Flexion and extension of the arms in suspension in the bar (Force of superior members); 30 meters (Speed) and 9 minutes (Resistance applied aerobic) was to evaluate the basic physical qualities. The results demonstrated that differences didn't exist among the goods, in most of the studied variables, and the existent differences among the ages of 8, 9 and 10 years, they demonstrate a normality tendency in the infantile development

Dança Folclórica: um estudo das qualidades físicas básicas em universitários de diferentes níveis técnicos

Health and life quality can be preserved and improved by the regular practice of physical activity. Sedentarism is an undesirable condition and represents risk for the health. This study has as objective to analyze the caloric cost and the basic physical qualities in college students of different technical levels. The research was descriptive and applied to 35 students, volunteers, from 19 to 34 years old, from both sexes, participants of the Dance Body of State University of Piauí, in the city of Teresina, in the activities of folkloric dance and walking. The caloric cost was evaluated with the accelerometer Caltrac 100/100 Plan, the basic physical qualities through the sitting and reaching test (flexibility); the vertical impulsion test, crouch (inferior members strength); the abdominal test (located muscular resistance); and the Burpee test (motor coordination). The participants were separated in two groups according to their time of practice: group 1 (beginners), group 2 (advanced). The parametric tests t by Student and correlation by Pearson were used, observing a significance p<0,05 in the sense of comparing the observed results, which showed that there are no significant differences between the two groups of students, according to the time of practice, in which concerns the caloric cost. The results of Strength, Resistance and Co-ordination test did not differ so much between the two groups. On the other hand, in the variable flexibility significant differences were observed (sig.p = 0,0022 << 0,05) between the observed groups, being Group 1 (31,5 ± 6,3) meaningfully less than Group 2 (38,1 ± 4,9), which constitutes a difference of about 21%. Such results present relations of caloric cost compensation between the studied groups, the motivation to the beginners group and flexibility to tne advanced group, justifying the lack of significant distinctions. In this sense the folkloric dance, as a physical activity, appears to be efficient, for significant co-relations are still noticed between the caloric cost levels of the dance with the walking, besides not presenting expressive differences between them.

Marcadores genéticos, antropometria e qualidades físicas básicas nos estágios maturacionais de nadadores paraibanos

The aim of this research was to analyse genetic markers, anthropometry and basic physical qualities in the differret stages of sexual maturation in swimmers in Paraíba. It is characterised as a descriptive cross sectional study. The sample was composed of 119 swimmers (males) that were divided among the stages of sexual maturation, from 7 to 17,9 years of age. They were associated to a local federation, the Confederação Brasileira de Desportes Aquáticos. The tests used were: genetic markers dermatoglyphics; Anthropometry body mass, stature, arm span, fat percentage and somatotype; physical qualities speed tests (25 meters crawl), strength (vertical jump) to inferior limbs, verarm throwing arremesso of a 2kg medicineball to superior limbs and abdominal), resistence (12 minutes to swimming), agility (he multistage 20-meter shuttle run test), flexibility (sit and reach test ) and coodination (stroke index); power of swimming (mean velocity in 25 meters mutiplied by body mass) and the self assessment of the sexual maturation supervised by a pediatric specialist. In the analyses we used the test normality of Shapiro-Wilk, then, we used ANOVA- one way followed by Post-Hoc test of Scheffé. The data showed in dermatogliphics a genetic tendence to velocity (L>W) with a predominance of the meso-ectomorphic somatotype profile; in relation to the physical qualities there was an evolution of the results in every stage due to the antropometric variables, except in the coordination tests. There were no significative differences between the stages. We conclude that swimming in Paraíba is composed of a signicative number of velocists with a mesomorph somatotype profile and low fat percentage, and that made it posssible to us to recomend that the trainings must be individual and according to personal characteristics of each athlete, and that the used variables must be specific for every region of the country. This dissertation presents a relation of multidiciplinar interface and its content has an application in Physical Education and Medicine

Estudo da correlação das características dermatoglífica e somatotípica com as qualidades físicas das atletas de voleibol da Seleção Infanto-juvenil do Estado do Rio Grande do Norte

The purpose of the present study is to identify the dermatoglyphic and somatotypic characteristics and the physical qualities of athletes from the under-17 State volleyball team, in Rio Grande do Norte, Brazil. The sample was composed of athletes, n = 14, aged 15.0 ± 0.88 years, weight (Kg) 58.3 ± 5.90 and height (cm) 169.4 ± 7.97, members of the referred team. For data collection Cummins & Midlo s (1942), o dermatoglyphic method and Heath & Carter s (1967) somatotypic method were used and to evaluate physical qualities, 2400m, 50m, Shuttle Run, abdominal , Sargent test and medicine-ball toss were performed. Fingerprints show that the group presents genetic predisposition for the following physical qualities: explosive force and velocity. As to somatotype, the group was endo-ectomorphic. At physical evaluation the group presented low Vo2 max values and reasonable levels of explosive force, local muscular endurance, agility and velocity. We conclude that: according to the dermatoglyphic model observed, the group needs training strategies to improve coordination and agility; somatotype reveals the necessity for reducing fat levels and increasing muscular mass; the evaluation of physical qualities demonstrates the need for better physical preparation. This study traces the profile of the under-17 volleyball player from Rio Grande do Norte, with respect to genetic and somatotypic aspects and physical qualities, which will serve as a parameter for future state teams

Práticas educativas escolares ancoradas às mídias tecnológicas: um estudo da contextualização da tecnologia na realidade de uma escola municipal em Natal/RN

Presenta un estudio acerca de las prácticas educativas en las escuelas ancladas a la utilización de los medios de comunicación y tecnologías educativas. Pretende dar a conocer, como los medios tecnológicos se constituyen en la actualidad, más precisamente en la educación. Como sujetos sociales, los niños de la investigación usan esos medios. Trata los problemas relacionados con las formas de ver el lugar de la vida de los niños, mediado por las herramientas técnicas, campos técnicos de varios idiomas. La investigación plantea una discusión de cómo podemos promover un encuentro de las prácticas escolares educativas mediados por la tecnología, aplicadas al contexto educativo y la experiencia de los estudiantes. La posible respuesta a cómo el maestro puede replantearse su papel como educador y tratar de construir, junto con el alumno, los conocimientos de manera significativa

A construção da ponte metálica sobre o Rio Pontengi: aspectos históricos, construtivos e de durabilidade - Natal/RN, Brasil (1912-1916) - estudo de caso

It is a case study that reports the construction of metal truss bridge in the river Potengi in Natal, Rio Grande do Norte, between the years 1912 and 1916. From testimonials on steel bridges in Brazil and worldwide including foundations. Documentary research from procurement of projects and contracts was performed. A chronology of construction, with a description of the equipment used and its original budget with the Brazilian government. Still, we used interviews and surveys with experimental sampling / testimonies, laboratory tests. This study aims to analyze historically and technically the Bridge over the River Potengi, emphasizing primarily the construction process, the qualities and characteristics of the materials used and the technological, chemical, mineralogical and microstructural properties of cement and concrete used in its construction. Taking as conclusions that cements pozolônicos ensured a good durability to the concrete in a hundred-year period and that the solution employed with the compressed air caissons was right

Alianças estratégicas enquanto formas microorganizacionais em cooperação competitiva: o caso da Rede Universitária de Incubadoras Tecnológicas de Cooperativas Populares - Rede de ITCPs

At present, the network re appear like alternatives of find forms in arrangements inter-organizational that offer his members better opportunities of modernizes technological, insertion in the market, managerial and at the same time permit the exchange of experiences, information and knowledge for fortify and compete of equal for equal, permitting brighten up the harmful effects of the compete wild. A threat that can be minimized by the organization in net and the use of other forms interorganizational and strategic alliances. Therefore the demonstrates the context of the competitive cooperation in network, seeking criteria of analysis of that phenomenon organizational, on the basis of a study of case of the net ITCPs and in the literature researched, aimed with that criterion and indicator for creation of a model of evaluation in the future (Factor Net) that be prominent for the drawing of those forms organizational you maintained, supportive, competitive and cooperative

Influência da adição de resíduo de caulim nas propriedades tecnológicas de uma massa padrão de porcelanato produzido em escala industrial

VARELA, M. L. et al. Influência da adição de resíduo de caulim nas propriedades tecnológicas de uma massa padrão de porcelanato produzido em escala industrial. Cerâmica, v.55, n.334 p.209-215. 2009.ISSN 0366-6913.Disponível em: . Acesso em: 06 out. 2010.

Efeito da adição de feldspato e/ou resíduo de caulin em formulações à base de argila ilítica

The red pottery industry in Piauí state is well developed and stands out at the national context for the technical quality of its products. The floor and wall tile industry, however, is little developed since the state has only one company that produces red clay-based ceramic tiles. This thesis aims at using the predominantly illitic basic mass of the above mentioned industry, with the addition of feldspar and/or kaolin residue in order to obtain products of higher technical quality. Kaolin residue consists basically of kaolinite, muscovite mica and quartz; the feldspar used was potassic. In this experiment, basic mass (MB) was used for experimental control and fifteen formulations codified as follows: F2, F4, F8, F16, F32, FR2, FR4, FR8, FR16, FR32, R2, R4, R8, R16 and R32. All raw materials were dry-milled, classified, formulated and then humidified to 10% water. Thereafter, test samples were produced by unixial pressing process in a rectangular steel matrix (60.0 x 20.0 x 5.0) mm3 at (25 MPa). They were fired at four temperatures: 1080°C, 1120°C, 1160°C, with a heating rate of 10°C/min during up to 10 min in an electric oven, and the last one in an industrial oven with a peak of 1140°C, aim ing to confirm the results found in laboratory and, finally, technological tests were performed: MEA, RL, AA, PA, TRF and PF. The results revealed that the residue under study can be considered a raw material with large potential in the industry of red clay-based ceramic tiles, since the results found both in laboratory and in the industry have shown that the test samples produced from the formulations with up to 4% feldspar and those produced with up to 8% feldspar and residue permitted a reduction in the water absorption rate and an increase in the mechanical resistance while those samples produced with up to 4% residue had an increase in the mechanical resistance when compared to those produced from the basic mass and that the formulation with 2% feldspar and residue presented the best technological properties, lowering the sintering temperature down to 1120°C

Efeito da tecnologia de microondas nas propriedades tecnológicas dos componentes de cerâmica estrutural

O processamento térmico de materiais cerâmicos via energia de microondas, no estágio atual, vem ganhando cada dia mais importância, tendo em vista suas inúmeras aplicações, como por exemplo: aplicação de microondas na área de processamento mineral (aquecimento de minérios antes da moagem, secagem, redução carbotérmica de óxidos minerais, lixiviação, fusão, pré-tratamento de minérios e concentrados de ouro refratário, regeneração de carvão, etc. de acordo com Kigman & Rowson, 1998). Em virtude de uma série de vantagens em potencial, frente aos métodos convencionais de aquecimento, como redução no tempo de processamento; economia de energia; diminuição do diâmetro médio das partículas e melhoramento nas propriedades tecnológicas em geral, esta tecnologia vem se destacando. Neste contexto, o objetivo geral deste trabalho, é desenvolver uma pesquisa visando identificar e caracterizar novas opções de matérias-primas cerâmicas como argilas, feldspatos e caulins que sejam eficazes para definir a formulação de uma ou mais massas para produção de componentes de cerâmica estrutural com propriedades físicas, mecânicas e estéticas adequadas após passarem por sinterização convencional e por energia de microondas destacando as vantagens desta última. Além dos requisitos técnicos e de processo, as formulações apresentadas deverão atender às expectativas de preço e de logística de fornecimento. No estudo foram conformados corpos-de-prova por extrusão e prensagem, sinterizados em fornos microondas e convencional, sob ciclos de queima mais rápidos que os atualmente praticados. As matérias-primas foram caracterizadas e analisadas, utilizando as técnicas de fluorescência por raios X (FRX), difração por raios X (DRX), análise térmica diferencial (DTA), análise térmica gravimétrica (DTG), análise granulométrica (AG), microscopia eletrônica de varredura (MEV), absorção d agua (AA), massa especifica aparente (MEA), porosidade aparente (PA), retração linear (RL) e tensão de ruptura e flexão (TRF). Os resultados obtidos indicaram que as propriedades tecnológicas de Absorção de água (AA) e Tensão de Ruptura e flexão (TRF), proposto no trabalho foram adquiridos com sucesso e estão bem além do limite exigido pelas especificações das normas da ABNT NBR 15.270/05 e 15.310/09