Modelagem dinâmica e simulação computacional de poços de petróleo verticais e direcionais com elevação por bombeio mecânico

LINS, Filipe C. A. et al. Modelagem dinâmica e simulação computacional de poços de petróleo verticais e direcionais com elevação por bombeio mecânico. In: CONGRESSO BRASILEIRO DE PESQUISA E DESENVOLVIMENTO EM PETRÓLEO E GÁS, 5. 2009, Fortaleza, CE. Anais... Fortaleza: CBPDPetro, 2009.

Influência da vermiculita expandida na resistência à compressão e reologia de pastas cimentantes de poços de petróleo

Several problems related to the loss of hydraulic seal in oilwells, causing gas migration and/or contamination of the production zone by water, have been reported. The loss of the hydraulic seal is a consequence of cracks which can be occasioned either by the invasion of gas during the wait on cement or by the expansion of the casing causing the fracture of the cement sheath. In case of the pressure of the formation is higher than the pressure in the annulus, gas can migrate into the slurry and form microannulus, which are channels where gas migrates after the cement is set. Cracks can be also occasioned by the fracture of the cement sheath when it does not withstand the thermal and dynamic loads. In reservoirs where the oil is heavy, steam water injection operation is required in order to get the oil flowing. This operation increases the temperature of the casing, and then it expands and causes the fracture of the cement sheath in the annulus. When the failures on the cement are detected, remedial cementing is required, which raise costs caused by the interventions. Once the use of cement in the construction civil sector is older than its use in the petroleum sector, it is common to bring technologies and solutions from the civil construction and apply them on the petroleum area. In this context, vermiculite, a mineral-clay widely encountered in Brazil, has been used, on its exfoliated form, in the civil construction, especially on the manufacture of lights and fireproof concretes with excellent thermal and acoustical properties. It has already been reported in scientific journals, studies of the addition of exfoliated vermiculite in Portland cements revealing good properties related to oilwell cementing operations. Thus, this study aimed to study the rheological behavior, thickening time, stability and compressive strength of the slurries made of Portland cement and exfoliated vermiculite in 5 different compositions, at room temperature and heated. The results showed that the compressive strength decreased with the addition of exfoliated vermiculite, however the values are still allowed for oiwell cementing operations. The thickening time of the slurry with no exfoliated vermiculite was 120 min and the thickening time of the slurry with 12 % of exfoliated vermiculite was 98 min. The stability and the rheological behavior of the slurries revealed that the exfoliated vermiculite absorbed water and therefore increased the viscosity of the slurries, even though increasing the factor cement-water. The stability experiment carried out at 133 ºF showed that, there was neither sedimentation nor reduction of the volume of the cement for the slurry with 12 % of exfoliated vermiculite. Thus, the addition of exfoliated vermiculite accelerates the set time of the cement and gives it a small shrinkage during the wait on cement, which are important to prevent gas migration

Efeito da adição de microfibras de lã de vidro na tenacidade à ruptura de pastas de cimento para poços de petróleo

Although there are a wide variety of additives that act in fresh state, to adjust the properties of cement, there is also a search by additions that improve the tenacity of the cement in the hardened state. This, in turn, can often be increased by inserting fibers, which act on the deflection of microcracks. This study aimed to use a microfiber glass wool (silica-based) as an additive reinforcing the cement matrix, improving the rupture tenacity, in order to prevent the propagation of microcracks in the cement sheath commonly found in oil wells submitted to high temperatures. The fibers were added at different concentrations, 2 to 5% (BWOC) and varied average sizes, grinding for 90 s, 180 s, 300 s, 600 s. The cement slurries were made with a density of 1,90 g/ cm3 (15,6 lb/gal), using Portland cement CPP- Special Class as the hydraulic binder and 40% silica flour. The characterization of the fiber was made by scanning electron microscopy (SEM), particle size by sieving, X-ray fluorescence (XRF), X-ray diffraction (XRD) and thermogravimetry (TG / DTG). Were performed technological tests set by the API (American Petroleum Institute) by rheology, stability, free water, compressive strength, as well as testing rupture energy, elastic modulus and permeability. The characterization results showed good thermal stability of the microfiber glass wool for application in oil wells submitted to steam injection and, also, that from the particle size data, it was possible to suggest that microfibers milled up to 300 s, are ideal to act as reinforcement to the cement slurries. The rheological parameters, there was committal of plastic viscosity when larger lengths were inserted of microfiber (F90). The values obtained by free water and stability were presented according to API. The mechanical properties, the incorporation of microfiber to the cement slurries gave better rupture tenacity, as compared to reference cement slurries. The values of compressive strength, elastic modulus and permeability have been maintained with respect to the reference cement slurries. Thus, cement slurries reinforced with microfiber glass wool can ensure good application for cementing oil wells submitted to steam injection, which requires control of microcracks, due to the thermal gradients

Germinação de sementes e otimização de técnicas de micropropagação de umbuzeiro (spondias tuberosa, arr.) anacardiaceae

The brazilian-plum (Spondias tuberosa, His) is a tropical fruit tree that has been consolidated in the market for agribusiness processing, due to its characteristic flavor of fruit. Accordingly, studies to optimize the propagation of plants are necessary for production of seedlings with agronomic and quality assurance measures. This study aimed at determining the efficient techniques for uniform seed germination, as brazilian-plum seed present mechanical dormancy, and establish optimal culture media for multiplication of shoots from the in vitro micropropagation. Firstly, in a greenhouse at the Universidade Federal do Rio Grande do Norte, was evaluated the influence of different methods of breaking dormancy in the emergence of seedlings of brazilian-plum and speed of germination (IVG) of seeds. After 60 days of cultivation, it was found that splay in the distal portion of the seed was the best treatment, with rates of 85.33% in germinability and 3.415 of IVG, compared with the treatment of seed-soaking in water for 12h + humus and the control group. Subsequently, new sources of seedling explants were obtained in studies of tissue culture. Laboratory of Plant Biotechnology that the university, was used stem apex, nodal segments and internodes in search of decontamination with various concentrations of calcium hypochlorite [Ca(OCl)2] and micropropagation, inoculating them in half WPM (1980) with various concentrations of 6-benzylaminopurine (BAP). We used 10 sample units with three replications for different concentrations of [Ca(OCl)2], BAP and explants type. After thirty days, which was observed for the control of contamination, during the establishment in vitro, concentrations of [Ca(OCl)2] between 0.5% and 2.0% were effective in combating exogenous contamination of the apex. In nodal segments and internodes, concentrations of [Ca(OCl)2] between 1.0% and 2.0% and 1.5% and 2.0% were respectively, sufficient to reduce the percentage of losses in these infestations explants. For micropropagation, the culture medium supplemented with 0.1 mg.L-1 BAP promotes better development of multiple shoots per explants from nodal segment. However, success does not get to shoot training in internodal segment

Construtivismo de marco teórico-pedagógico a grife: um estudo a partir das mensagens veiculadas na internet

This thesis is resulted of a research on propagated the social representations of constructivism in the Internet, which as had estimated basic the idea of Moscovici (1961) of that the media it has determinative paper in the popularization of the scientific theories, in formation e propagation of the social representations and in the construction of behaviors human beings. Understanding the Internet as latest space of circulation of social communications, therefore, privileged field (and still not explored) for studies of social representations, we choose this half midiático as investigative field of our research, it if it constitutes in the "great ocean of the new informational planet" (LEVY, 2000, p. 126), besides making possible the interaction with different forms of images, different individuals, different ' world ', configuring itself as important space of symbolic production e of analysis of the representational process in the world contemporary. Based in these questions, we trace as objective to analyze the circulating speech propagated on-line on the constructivism, searching to apprehend the social representations shared the respect. This objective was constructed in face of the insertion of the theory constructivist in the educational way has two decades more than, as well as of its consolidation as reference in different social contexts, mainly in midiático. The question that directed the research was: as this theory obtains to penetrate in some layers of our society, to influence the world readings e the behaviors of different people? That modifications it suffers in this trajectory and which the paper of the Internet in this process? The corpus of the research was constituted of the substances on the theory found in the Internet, in pages in Portuguese of Google, in the period of 27 of July of 2004 the 17 of August of 2004. The data they had been analyzed on the basis of the project of analysis of content elaborated for Moscovici (1961) and in the estimated theoreticians of the social communication, in special of the hypermedia. The results had disclosed that the Internet participates of determinative form in the process of popularization of the constructivism theory, not only spreading out its estimated theoretician- methodological for the domain public (diffusion), but propagating positive beliefs and images of its postulates (propagation) and using them it service of interests politicians e financiers (propaganda). The popularization of the constructivism in the Internet and social representations of this theory propagated configure one process in which the theory passes of pedagogical theoretical landmark for grief, assuming a commercial character extremely and the status of solution for problems of the education and the society, stirring up attitudes and behaviors in public, most general possible, that comes to take care of to the interests politicians e marketing. Recognizing the diversity, the permanent renewal of information and the negotiation of directions gifts in the Internet, as well as the innumerable ones forms of access to the information found by it, we consider results of the research as fruits of the inherent characteristics to this way midiático, to the time where we call the attention for relativity these results, for the plasticity of knowing them and sensible propagated on-line e for the great challenge that the hypermedia imposes to the study of communication phenomena, of the social representations and in educational quarrels and for the necessity of new research that they investigate the forms of socialization of the information and communication propitiated by hypermedia and its implications in the construction of the symbolic universes and in practical social

O estágio supervisionado como contexto de formação docente específica para educação infantil: o que dizem os formandos sobre suas aprendizagens?

Kindergarten teachers training gains the spotlight with the passing of Law number 9.394/96 (Guidelines and Basis Law) that defines this segment as the initial step of basic education, with pedagogical function. In this spectrum, the discussion about teacher training unravels to ensure social quality to education as well as the teacher s specificities towards child singularities. Adding to that, the growing propagation of Pedagogy in an undergraduate level, given that such course has been continually transformed by the National Curriculum Guidelines for Pedagogy (2006), highlighting the addition of curriculum components that are specific to upbringing. The complex debate circa kindergarten teachers training has advancements and hardships that need to be unveiled in order to improve both formation and social quality of education in the 0- 5 years old range. This investigation inserts itself in said context and aims to analyze which knowledge, specific to kindergarten teaching are constructed, according to undergraduate trainees, in Pedagogy s supervised internship. The study was conducted alongside the discipline: Supervised Internship in Child Education ministered by the Advanced Campus of Rio Grande do Norte s State University s in the municipality of Patu-RN (CAP-UERN-Patu) and was conducted through 2012 by accompanying four undergraduate interns. We first assumed that the development of teaching knowledge is a complex process of appropriation of cultural-social practices and is symbolically mediated by interactions that occur in the formation context, and the supervised internship can be understood as a space for the articulation and enlargement of theoretical and practical knowledge, directly related to the specificities of child education. The theoretical-methodological foundation was based upon the historiccultural approach of L. S. Vygotsky and M. Bakhtin s dialogism on human sciences research, as well as his postulates on learning and developmental processes, conceived as both essentially social and discursive. The investigation approached the principles of the qualitative perspective and to the construction and analysis of data, involved documental analysis and, specially, semi-structured interviews, both individual and collective, whose fundamental premise was the production-comprehension of meanings in a dialogical perspective. The participants texts/speeches produced a synthesis that points to the occurrence, within the supervised internship at CAP/UERN, of internalization/appropriation processes and, as such, of formulation of meanings that are pertinent to child education: child, childhood, kindergarten and teacher signification and this stage s specific teaching knowledge. It stood out that the internship, alongside other curriculum components, is, in fact, one of the primeval formation environment for the teachers, in which the interns interact with their colleagues, supervisor professor, collaborator professor, and of course, the children to construct their erudition. Such interactions allow the undergraduate interns to develop attitudes and procedures to reflect on what they know, what they ve done and what they can achieve. We have concluded that the undergraduate internship can constitute itself as an articulatorconsolidator environment in the future teacher s formation process and, since well oriented, can provide the effective initiation, not only to the practice, but to the praxis as a movement of non dissociability between theory and practice

Inclusão e deficiência: em busca das representações sociais na mídia impressa em Natal/RN

This thesis is the result of an extensive research on print media discourse on the inclusion of disabled people in society. Articles published in the newspapers Diário de Natal/O Poti and Tribuna do Norte from 1992 to 2002 have been analyzed. Beginning with the very same questions that moved Moscovici (1978) in his classic study La Psychalyse son image et son public , according to which the media play a predominant role in the formation and propagation of social representations as well as in the construction of human behaviors, we have chosen this mass media as our investigation field. Understanding the importance of the communication theory, we intend to associate it to the social representation theory, since communication, as an aspiration, relates to the fundamentals of all humanity (WOLTON, 2004, p. 56). Moreover, means of communication represent an important space for symbolic production and representational process, allowing the analysis of the circulating discourses on social inclusion and disability. Based on these questions, we have determined social representations present in print media on the subject to be our study object. This objective was elected due to the fact that the thematic of disability and inclusion is scarcely and sporadically found in journalistic speech. The research questions have been: which is the representation of disabled people s condition in print media? What changes have occurred during the analyzed period and which was the role played by print media in this process? The research corpus was composed of newspaper articles about various aspects concerning disability and of free word association by reporters. We have analysed: 1) graphical language promoted by the picture of the substances propagated in the period from 1992 a 2002; 2) free word association experiments carried out with reporters of both newspapers; and 3) texts published from 1996 to 1997 using the high-tech program ALCESTE (Contextual Lexical Analysis of a Set of Segments of Texts). The results revealed that the print media in Natal/RN refer to the topic in a discontinuous way, and depend on specific events to highlight disabled people s fight for their rights. Social inclusion is still a great challenge for these people in all levels. We believe that this incapacity to overcome all kinds of obstacles is established in a dialectic relation between society and the media: society remains silent (the manifestation of interest for the cause only attracts some people s or groups attention) and the media, which selects which information is to be broadcasted, gives no evidence to the issue. This representation may be noticed in the infrequency in which articles about the subject are published, as well as in the emphasis to sports, a more important issue for the media. An implication of this study is that a new perspective is opened for analysis and reflection: the Paralympics games as both an inclusive and a segregating social phenomenon. It would be beautiful to have all of us together!

Desenvolvimento de um ressoador retangular de fenda com múltiplas camadas de substrato e com utilização de material PBG para sistema de comunicação sem fio

In the globalized world modern telecommunications have assumed key role within the company, causing a large increase in demand for the wireless technology of communication, which has been happening in recent years have greatly increased the number of applications using this technology. Due to this demand, new materials are developed to enable new control mechanisms and propagation of electromagnetic waves. The research to develop new technologies for wireless communication presents a multidisciplinary study that covers from the new geometries for passive antennas, active up to the development of materials for devices that improve the performance at the frequency range of operation. Recently, planar antennas have attracted interest due to their characteristics and advantages when compared with other types of antennas. In the area of mobile communications the need for antennas of this type has become increasingly used, due to intensive development, which needs to operate in multifrequency antennas and broadband. The microstrip antennas have narrow bandwidth due to the dielectric losses generated by irradiation. Another limitation is the degradation of the radiation pattern due to the generation of surface waves in the substrate. Some techniques have been developed to minimize this limitation of bandwidth, such as the study of type materials PBG - Photonic Band Gap, to form the dielectric material. This work has as main objective the development project of a slot resonator with multiple layers and use the type PBG substrate, which carried out the optimization from the numerical analysis and then designed the device initially proposed for the band electromagnetic spectrum between 3-9 GHz, which basically includes the band S to X. Was used as the dielectric material RT/Duroid 5870 and RT/Duroid 6010.LM where both are laminated ceramic-filled PTFE dielectric constants 2.33 and 10.2, respectively. Through an experimental investigation was conducted an analysis of the simulated versus measured by observing the behavior of the radiation characteristics from the height variation of the dielectric multilayer substrates. We also used the LTT method resonators structures rectangular slot with multiple layers of material photonic PBG in order to obtain the resonance frequency and the entire theory involving the electromagnetic parameters of the structure under consideration. xviii The analysis developed in this work was performed using the method LTT - Transverse Transmission Line, in the field of Fourier transform that uses a component propagating in the y direction (transverse to the real direction of propagation z), thus treating the general equations of the fields electric and magnetic and function. The PBG theory is applied to obtain the relative permittivity of the polarizations for the sep photonic composite substrates material. The results are obtained with the commercial software Ansoft HFSS, used for accurate analysis of the electromagnetic behavior of the planar device under study through the Finite Element Method (FEM). Numerical computational results are presented in graphical form in two and three dimensions, playing in the parameters of return loss, frequency of radiation and radiation diagram, radiation efficiency and surface current for the device under study, and have as substrates, photonic materials and had been simulated in an appropriate computational tool. With respect to the planar device design study are presented in the simulated and measured results that show good agreement with measurements made. These results are mainly in the identification of resonance modes and determining the characteristics of the designed device, such as resonant frequency, return loss and radiation pattern

Um estudo de estruturas com PBG e fotônica

One of the objectives of this work is the ana1ysis of planar structures using the PBG (photonic Bandgap), a new method of controlling propagation of electromagnetic waves in devices with dielectrics. Here the basic theory of these structures will be presented, as well as applications and determination of certain parameters. In this work the analysis will be performed concerning PBG structures, including the basic theory and applications in planar structures. Considerations are made related to the implementation of devices. Here the TTL (Transverse Transmission Line) method is employed, characterized by the simplicity in the treatment of the equations that govern the propagation of electromagnetic waves in the structure. In this method, the fields in x and z are expressed in function of the fields in the traverse direction y in FTD (Fourier Transform Domain). This method is useful in the determination of the complex propagation constant with application in high frequency and photonics. In this work structures will be approached in micrometric scale operating in frequencies in the range of T erahertz, a first step for operation in the visible spectra. The mathematical basis are approached for the determination of the electromagnetic fields in the structure, based on the method L TT taking into account the dimensions approached in this work. Calculations for the determination of the constant of complex propagation are also carried out. The computational implementation is presented for high frequencies. at the first time the analysis is done with base in open microstrip lines with semiconductor substrate. Finally, considerations are made regarding applications ofthese devices in the area of telecommunications, and suggestions for future

Caracterização de cerâmicas porosas de alumina reforçada com zircônia produzidas pelo método da réplica

Porous ceramics have many applications: thermal insulation, catalytic support, materials to fire protection, filters, and others. There are many techniques to production of ceramic filters. One technique to obtain ceramic filters is the replication method. This method consists in the impregnation of polymeric foam with ceramic slurry followed by a heating treatment that will burn out the organic elements and sintering of the material, resulting of a replication of the original foam. To perform their functions ceramic filters must satisfy mechanical requirements and permeability parameters (darcian k1 and no-darcian k2). The permeability and the strength of the ceramic material are dependent of the pore size and pore distribution. To the use at high temperatures the evaluation of mechanical properties in these temperatures is necessary. In this work the mechanical behavior of two commercial porous ceramics (10 and 40 poros per inch) was studied these materials were submitted to compression and four-point flexure test (room temperature, at 1000 °C, after thermal shock). Density and porosity measurements, permeability tests and microstructural analysis by scanning electronic microscopy (SEM) were realized. The Results showed that the decrease of mechanical strength of these materials, when submitted to thermal shock, occur for propagation of new cracks from cracks pre-existing and the permeability depends of the pore size

Efeito da adição de argila expandida e adições minerais na formulação de concretos estruturais leves autoadensáveis

The search for alternative materials with lower density, reduction in heat transfer and propagation of noise associated with the ease of handling and application in concrete structures, represents an enormous challenge in the formulation and knowledge of the performance of self-compacting lightweight concrete, which has technology little known nationally, and appears on the international scene as an innovative material and alternative to conventional concrete. Based on these, this study set out to study self-compacting lightweight concrete made with two distinct grades of expanded clay associated with the addition of plasticizing/superplasticizers additives and mineral additions of metakaolin and bagasse ash of sugar cane. There is also an object of study, evaluation of pozzolanic activity of mineral admixtures and their influence on the durability characteristics of concrete. The rheological, physical, mechanical and microstructural analysis in this study served as basis in the classification of concretes autoadensáveis, targeting the national technical requirements for their classification in the category autoadensável and lightweight structural. The inclusion of mineral admixtures (metakaolin and bagasse ash of sugar cane), partial replacement of cement, pozzolanic activity and demonstrated maintenance of mechanical properties through the filler effect, a reduction of up to 76% of the nitrogen gas permeability in blend with 20% bagasse ash. All concretes had rheology (cohesion and consistency) suitable for self-adensability as well as strength and density inherent structural lightweight concrete without presenting phenomena of segregation and exudation

Envelhecimento ambiental acelerado em PRF a base de tecidos híbridos kevlar/vidro: propriedades e instabilidade estrutural

There are a number of damaging mechanisms that various materials can suffer in service. However, when working with polymer composite materials, this is something that requires analysis, especially when exposed to adverse environmental conditions. Thus, the objective of the present thesis is the study of the direct influence of environmental aging and the form of hybridization of the reinforcement woven on the structural stability, surfacedegradation and fracture process of polymer composites laminates. For this, the development of two polymer composite laminates was necessary, where one of them was reinforced with a bi-directional woven with hybrid strandsofkevlar-49/glass-Efibers, and the other also with a bi-directionalwoven, however with weft and warpformed of alternating strandsof Kevlar-49 fibers and glass-E fiber The reinforcementwoven are industrially manufactured. Both laminates use a polyester resin as a matrixand are made up of four layers each. All laminates were industrially prepared by the hand lay-up method of manufacturing. To do this, test specimens were manufactured of the respective laminates and submitted to environmental aging accelerated through the aging chamber. They were exposed to alternating cycles of UV radiation and moisture (heated steam) for a standard defined period. At the end of the exposure period the specimens were subjected to mechanical tests of uniaxial tensile and bending in three points and to the characterizationsof the fracture and surface deterioration. In addition, they were submitted to a structural degradation assessment by the measurement of mass variation technique (MMVT) and the measurement of thickness variation technique (MTVT), this last technique being developed in this thesis. At the end of the analysis it was observed that the form of hybridization of the reinforcement woven and the aging process directly influence with losses or gain in mechanical properties, with losses in the structural degradation and in the formation and propagation of damage mechanism of the developedcomposite laminates

Filtros acústicos em cristais fonônicos

In this work, we have studied the acoustic phonon wave propagation within the periodic and quasiperiodic superlattices of Fibonacci type. These structures are formed by phononic crystals, whose periodicity allows the raise of regions known as stop bands, which prevent the phonon propagation throughout the structure for specific frequency values. This phenomenon allows the construction of acoustic filters with great technological potential. Our theoretical model were based on the method of the transfer matrix, thery acoustics phonons which describes the propagation of the transverse and longitudinal modes within a unit cell, linking them with the precedent cell in the multilayer structure. The transfer matrix is built taking into account the elastic and electromagnetic boundary conditions in the superllatice interfaces, and it is related to the coupled differential equation solutions (elastic and electromagnetic) that describe each model under consideration. We investigated the piezoelectric properties of GaN and AlN the nitride semiconductors, whose properties are important to applications in the semiconductor device industry. The calculations that characterize the piezoelectric system, depend strongly on the cubic (zinc-bend) and hexagonal (wurtzite) crystal symmetries, that are described the elastic and piezoelectric tensors. The investigation of the liquid Hg (mercury), Ga (gallium) and Ar (argon) systems in static conditions also using the classical theory of elasticity. Together with the Euler s equation of fluid mechanics they one solved to the solid/liquid and the liquid/liquid interfaces to obtain and discuss several interesting physical results. In particular, the acoustical filters obtained from these structures are again presented and their features discussed

Excitações em cristais fotônicos unidimensionais

In this work, we present a theoretical study of the propagation of electromagnetic waves in multilayer structures called Photonic Crystals. For this purpose, we investigate the phonon-polariton band gaps in periodic and quasi-periodic (Fibonacci-type) multilayers made up of both positive and negative refractive index materials in the terahertz (THz) region. The behavior of the polaritonic band gaps as a function of the multilayer period is investigated systematically. We use a theoretical model based on the formalism of transfer matrix in order to simplify the algebra involved in obtaining the dispersion relation of phonon-polaritons (bulk and surface modes). We also present a quantitative analysis of the results, pointing out the distribution of the allowed polaritonic bandwidths for high Fibonacci generations, which gives good insight about their localization and power laws. We calculate the emittance spectrum of the electromagnetic radiation, in THZ frequency, normally and obliquely incident (s and p polarized modes) on a one-dimensional multilayer structure composed of positive and negative refractive index materials organized periodically and quasi-periodically. We model the negative refractive index material by a effective medium whose electric permittivity is characterized by a phonon-polariton frequency dependent dielectric function, while for the magnetic permeability we have a Drude like frequency-dependent function. Similarity to the one-dimensional photonic crystal, this layered effective medium, called polaritonic Crystals, allow us the control of the electromagnetic propagation, generating regions named polaritonic bandgap. The emittance spectra are determined by means of a well known theoretical model based on Kirchoff s second law, together with a transfer matrix formalism. Our results shows that the omnidirectional band gaps will appear in the THz regime, in a well defined interval, that are independent of polarization in periodic case as well as in quasiperiodic case

Mulher não vale nem um real : patriarcado nas letras das músicas de forró

Patriarchy is a dominating system that establishes male power in social relations as the social-ideological system and the structuring element of several ways of men‟s domination on gender social relations, on organization of social life, on private relations, and on political decision spaces. In this study we enlarge our reflection about patriarchy from the analysis of Forró lyrics, more specifically the variation known as stylized. Of late decades, it is a kind of music that has been receiving a large acceptance all over the national territory, making use of everyday expressions that propagate and make apology to many forms of discrimination, oppression and violence against women. We emphasize that over this study 14 Forró lyrics were analyzed of different styles besides stylized, like the traditional and the double meaning ones. However, we dwelled on the content analysis, particularly in three Stylized Forró lyrics, they are: Tapa na Cara (2008) by Saia Rodada Band; Mulher Roleira (2004), Aviões do Forró Band; and Bomba no Cabaré (2007), Matruz com Leite Band. In order to make a critical analysis of the elements in the lyrics content, we support ourselves on the theoretic-methodological references of the dialectical materialism, a method that allowed us to get closer to the totality of the reality that includes the popular involvement of the analyzed lyrics in a qualitative way. In that sense, we hold onto the theoretic-methodological categories: gender social relations, patriarchy, violence against women, ideology and cultural industry. As from the lyrics compilation, they were arranged by theme, we classified and analyzed the content, which allowed us to comprehend the messages in the lyrics, beyond the text shows at first sight. Today, there are many mechanisms of propagation and perpetuation of patriarchal ideology. A very relevant mechanism of this phenomenon is the sexual violence. The violence against women is a form to propagate and keep sexism, which may occur in different ways, like physical, psychological, sexual, patrimonial and social. Through our study we established that the propagation of the violence against women as being something natural and banal, giving reinforcement to the asymmetric construction of gender relations that priorizes male to the detriment of female. This banalization is perhaps, one of the strongest allies of this phenomenon‟s perpetuation, that affects women all over the world from different social classes