Interfaces cérebro-computador: estudo, design e desenvolvimento do jogo AdmiralMind Battleship

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Avaliação de usabilidade em materiais interativos de ensino a distância da UFRN-SEDIS

This study aims to assess the usability of Interactive Materials developed for the courses offered by UFRN SEDIS the modality of distance education (DE), using the techniques of focus group cooperative evaluation and assessment of satisfaction. The Interactive Materials are intended to serve as an avenue where the course content reaches the student in an educational, stimulating and self-instructive enough for the student to engage and find no difficulty in using it so. After the survey data in this context were selected four Interactive Materials ("Introduction to Applied Calculus", "Science, Technology and Society", "studies the Semi-Arid" and "Cultural Geography") that adopt the framework established by UFRN for SEDIS be evaluated for their usability. Initially, a preliminary test was conducted from cooperative assessment with a student interacting with the four learning objects in order to reveal and map the major failures of usability, supporting deeper questions later. The recordings of this preliminary test were analyzed by a focus group composed of two graphic designers and two multimedia designers, and developers responsible for these objects, which helped to analyze the gap between "what was designed" and "as was used "structuring and supplementing the roadmap for cooperative evaluation and assessment of subsequent satisfaction. The cooperative evaluation was applied individually to ten students of undergraduate UFRN that tested each of the four materials. At the end, every student completed a questionnaire assessing satisfaction form adapted Wanted (Questionnaire for User Interaction Satisfaction). The analysis of the data collected in this study revealed positive, negative and notes to be considered to guide the future development of Interactive Materials, in the context of UFRN SEDIS, feedback to the process of design and evaluation with user participation

Produção artesanal : análise do método de intervenção de design no artesanato potiguar sob o ponto de vista dos atores envolvidos no processo

This work presents an analysis of the method of intervention used in the craft of design by SEBRAE in Rio Grande do Norte under the viewpoint of the actors involved, especially the craftsmen and design consultants. The research methodology used was based on the ergonomic work analysis - AET, applying observational techniques and interactive. Data tabulated from the matrix to include comments were analyzed in order to allow the generation of qualitative and quantitative information. The results of this research allow us to affirm that for the process of innovation through the design of intervention are satisfactory for all involved, it is necessary that the bonds of interaction are established and the joint actions in the innovation process to bear fruit in favor sustainability of artisan groups

Modos projetuais de simulação: uso de ferramentas de simulação térmica no processo projetual de arquitetura

This thesis aims to describe and demonstrate the developed concept to facilitate the use of thermal simulation tools during the building design process. Despite the impact of architectural elements on the performance of buildings, some influential decisions are frequently based solely on qualitative information. Even though such design support is adequate for most decisions, the designer will eventually have doubts concerning the performance of some design decisions. These situations will require some kind of additional knowledge to be properly approached. The concept of designerly ways of simulating focuses on the formulation and solution of design dilemmas, which are doubts about the design that cannot be fully understood nor solved without using quantitative information. The concept intends to combine the power of analysis from computer simulation tools with the capacity of synthesis from architects. Three types of simulation tools are considered: solar analysis, thermal/energy simulation and CFD. Design dilemmas are formulated and framed according to the architect s reflection process about performance aspects. Throughout the thesis, the problem is investigated in three fields: professional, technical and theoretical fields. This approach on distinct parts of the problem aimed to i) characterize different professional categories with regards to their design practice and use of tools, ii) investigate preceding researchers on the use of simulation tools and iii) draw analogies between the proposed concept, and some concepts developed or described in previous works about design theory. The proposed concept was tested in eight design dilemmas extracted from three case studies in the Netherlands. The three investigated processes are houses designed by Dutch architectural firms. Relevant information and criteria from each case study were obtained through interviews and conversations with the involved architects. The practical application, despite its success in the research context, allowed the identification of some applicability limitations of the concept, concerning the architects need to have technical knowledge and the actual evolution stage of simulation tools

A organização do processo de projeto de arquitetura no meio profissional: uma análise da produção em escritórios

This paper examines, through case studies, the organization of the production process of architectural projects in architecture offices in the city of Natal, specifically in relation to building projects. The specifics of the design process in architecture, the production of the project in a professional field in Natal, are studied in light of theories of design and its production process. The survey, in its different phases, was conducted between March 2010 and September 2012 and aimed to identify, understand, and analyze comparatively, by mapping the design process, the organization of production of building projects in two offices in Natal, checking as well the relationships of their agents during the process. The project was based on desk research and exploration, adopting, for both, data collection tools such as forms, questionnaires, and interviews. With the specific aim of mapping the design process, we adopted a technique that allows obtaining the information directly from employee agents involved in the production process. The technique consisted of registering information by completing daily, during or at the end of the workday, an individual virtual agenda, in which all agent collaborators described the tasks performed. The data collected allowed for the identification of the organizational structure of the office, its hierarchy, the responsibilities of agents, as well as the tasks performed by them during the two months of monitoring at each office. The research findings were based on analyses of data collected in the two offices and on comparative studies between the results of these analyses. The end result was a diagnostic evaluation that considered the level of organization and elaborated this perspective, as well as proposed solutions aimed at improving both the organization of the process and the relationships between the agents under the lens analyzed

Otimização do processo de síntese do aluminato de cobalto via método de polimerização de complexos (MPC) através do planejamento fatorial fracionado

In the ceramics industry are becoming more predominantly inorganic nature pigments. Studies in this area allow you to develop pigments with more advanced properties and qualities to be used in the industrial context. Studies on synthesis and characterization of cobalt aluminate has been widely researched, cobalt aluminate behavior at different temperatures of calcinations, highlighting especially the temperatures of 700, 800 and 900° C that served as a basis in the development of this study, using the method of polymerization of complex (CPM), economic, and this method applied in ceramic pigment synthesis. The procedure was developed from a fractional factorial design 2 (5-2) in order to optimize the process of realization of the cobalt aluminate (CoAl2O4), having as response surfaces the batch analysis data of Uv-vis spectroscopy conducted from the statistic software 7.0, for this were chosen five factors as input variables: citric acid (stoichiometric manner), puff or pyrolysis time (h), temperature (° C), and calcinations (° C/min), at levels determined for this study. By applying statistics in the process of obtaining the CoAl2O4 is possible the study of these factors and which may have greater influence in getting the synthesis. The pigments characterized TG/DSC analyses, and x-ray diffraction (XRD) and scanning electron microscope (SEM/EDS) in order to establish the structural and morphological aspects of pigment CoAl2O4, among the factors studied it were found to statically with increasing calcinations temperature 700°< 800 <900 °C, the bands of Uv-vis decrease with increasing intensity of absorbance and that with increasing time of puff or pyrolysis (h) there is an increase in bands of Uv-vis proportionally, the generated model set for the conditions proposed in this study because the coefficient of determination can explain about 99.9% of the variance (R²), response surfaces generated were satisfactory, so it s possible applicability in the ceramics industry of pigments

Estudo paramétrico da recuperação de óleo no processo de drenagem gravitacional com injeção de CO2

The gas injection has become the most important IOR process in the United States. Furthermore, the year 2006 marks the first time the gas injection IOR production has surpassed that of steam injection. In Brazil, the installation of a petrochemical complex in the Northeast of Brazil (Bahia State) offers opportunities for the injection of gases in the fields located in the Recôncavo Basin. Field-scale gas injection applications have almost always been associated with design and operational difficulties. The mobility ratio, which controls the volumetric sweep, between the injected gas and displaced oil bank in gas processes, is typically unfavorable due to the relatively low viscosity of the injected gas. Furthermore, the difference between their densities results in severe gravity segregation of fluids in the reservoirs, consequently leading to poor control in the volumetric sweep. Nowadays, from the above applications of gas injection, the WAG process is most popular. However, in attempting to solve the mobility problems, the WAG process gives rise to other problems associated with increased water saturation in the reservoir including diminished gas injectivity and increased competition to the flow of oil. The low field performance of WAG floods with oil recoveries in the range of 5-10% is a clear indication of these problems. In order to find na effective alternative to WAG, the Gas Assisted Gravity Drainage (GAGD) was developed. This process is designed to take advantage of gravity force to allow vertical segregation between the injected CO2 and reservoir crude oil due to their density difference. This process consists of placing horizontal producers near the bottom of the pay zone and injecting gás through existing vertical wells in field. Homogeneous models were used in this work which can be extrapolated to commercial application for fields located in the Northeast of Brazil. The simulations were performed in a CMG simulator, the STARS 2007.11, where some parameters and their interactions were analyzed. The results have shown that the CO2 injection in GAGD process increased significantly the rate and the final recovery of oil

Estudo da perda de carga e calor no poço injetor no processo De drenagem gravitacional assistida por vapor (SAGD)

The oil companies in the area in general are looking for new technologies that can increase the recovery factor of oil contained in reservoirs. These investments are mainly aimed at reducing the costs of projects which are high. Steam injection is one of these special methods of recovery in which steam is injected into the reservoir in order to reduce the viscosity of the oil and make it more mobile. The process assisted gravity drainage steam (SAGD) using steam injection in its mechanism, as well as two parallel horizontal wells. In this process steam is injected through the horizontal injection well, then a vapor chamber is formed by heating the oil in the reservoir and, by the action of gravitational forces, this oil is drained down to where the production well. This study aims to analyze the influence of pressure drop and heat along the injection well in the SAGD process. Numerical simulations were performed using the thermal simulator STARS of CMG (Computer Modeling Group). The parameters studied were the thermal conductivity of the formation, the flow of steam injection, the inner diameter of the column, the steam quality and temperature. A factorial design was used to verify the influence of the parameters studied in the recovery factor. We also analyzed different injection flow rates for the model with pressure drop and no pressure drop, as well as different maximum flow rates of oil production. Finally, we performed an economic analysis of the two models in order to check the profitability of the projects studied. The results showed that the pressure drop in injection well have a significant influence on the SAGD process.

Estudo do processo de combustão in-situ usando poços horizontais como produtores de óleo (Toe-to-Hell Air Injection)

The method "toe-to-heel air injection" (THAITM) is a process of enhanced oil recovery, which is the integration of in-situ combustion with technological advances in drilling horizontal wells. This method uses horizontal wells as producers of oil, keeping vertical injection wells to inject air. This process has not yet been applied in Brazil, making it necessary, evaluation of these new technologies applied to local realities, therefore, this study aimed to perform a parametric study of the combustion process with in-situ oil production in horizontal wells, using a semi synthetic reservoir, with characteristics of the Brazilian Northeast basin. The simulations were performed in a commercial software "STARS" (Steam, Thermal, and Advanced Processes Reservoir Simulator), from CMG (Computer Modelling Group). The following operating parameters were analyzed: air rate, configuration of producer wells and oxygen concentration. A sensitivity study on cumulative oil (Np) was performed with the technique of experimental design, with a mixed model of two and three levels (32x22), a total of 36 runs. Also, it was done a technical economic estimative for each model of fluid. The results showed that injection rate was the most influence parameter on oil recovery, for both studied models, well arrangement depends on fluid model, and oxygen concentration favors recovery oil. The process can be profitable depends on air rate

Estudo do processo de combustão in-situ em reservatórios maduros de óleos médios e leves (high pressure air injection)

Nearly 3 x 1011 m3 of medium and light oils will remain in reservoirs worldwide after conventional recovery methods have been exhausted and much of this volume would be recovered by Enhanced Oil Recovery (EOR) methods. The in-situ combustion (ISC) is an EOR method in which an oxygen-containing gas is injected into a reservoir where it reacts with the crude oil to create a high-temperature combustion front that is propagated through the reservoir. The High Pressure Air Injection (HPAI) method is a particular denomination of the air injection process applied in light oil reservoirs, for which the combustion reactions are dominant between 150 and 300°C and the generation of flue gas is the main factor to the oil displacement. A simulation model of a homogeneous reservoir was built to study, which was initially undergone to primary production, for 3 years, next by a waterflooding process for 21 more years. At this point, with the mature condition established into the reservoir, three variations of this model were selected, according to the recovery factors (RF) reached, for study the in-situ combustion (HPAI) technique. Next to this, a sensitivity analysis on the RF of characteristic operational parameters of the method was carried out: air injection rate per well, oxygen concentration into the injected gas, patterns of air injection and wells perforations configuration. This analysis, for 10 more years of production time, was performed with assistance of the central composite design. The reservoir behavior and the impacts of chemical reactions parameters and of reservoir particularities on the RF were also evaluated. An economic analysis and a study to maximize the RF of the process were also carried out. The simulation runs were performed in the simulator of thermal processes in reservoirs STARS (Steam, Thermal, and Advanced Processes Reservoir Simulator) from CMG (Computer Modelling Group). The results showed the incremental RF were small and the net present value (NPV) is affected by high initial investments to compress the air. It was noticed that the adoption of high oxygen concentration into the injected gas and of the five spot pattern tends to improve the RF, and the wells perforations configuration has more influence with the increase of the oil thickness. Simulated cases relating to the reservoir particularities showed that smaller residual oil saturations to gas lead to greater RF and the presence of heterogeneities results in important variations on the RF and on the production curves

Design de interfaces para aplicativo de smartphone como recurso auxiliar no acompanhamento clínico de pacientes fibromiálgicos

Este trabalho tem como objetivo o desenvolvimento de interfaces com o usuário para aplicativo móvel smartphones com intuito de contribuir para a eficiência das atividades de profissionais e pesquisadores da área de fisioterapia ao oferecer suporte ao acompanhamento clínico da dor no tratamento de pacientes fibromiálgicos. Utilizando a abordagem de Design Centrado no Usuário - DCU, foram realizadas entrevistas e uma investigação contextual para a identificação inicial dos problemas e necessidades dos usuários. Verificou-se que as atividades de monitoramento e acompanhamento das sessões do tratamento de pacientes fibromiálgicos são, tradicionalmente, realizadas por meio de manipulando de formulários e fichas em papel (registro das condições de saúde do paciente) e escalas de classificação da dor em formato impresso (apresentadas ao paciente para indicação de sua dor percebida para cada ponto pré-determinado do corpo). Os procedimentos envolvidos nestas atividades dificultam o gerenciamento do desempenho do tratamento, o que, segundo relatos, reflete no comprometimento dos pacientes na adesão e frequência as sessões. A partir da observação e do levantamento das necessidades desses profissionais diante de suas atividades, foi proposto um aplicativo para smartphone com a intenção de minimizar os problemas ocasionados pelo uso das ferramentas convencionais e de prover informações rápidas acerca dos dados coletados. Então, seguindo a abordagem do DCU foi elaborado um modelo conceitual durante a etapa de concepção de soluções, o qual guiou a criação dos protótipos. A avaliação das interfaces do protótipo foi realizada com o envolvimento dos usuários a partir da técnica de avaliação cooperativa. Seus resultados proporcionaram o refinamento das interfaces e o desenvolvimento de uma nova proposta do design das interfaces em protótipo de alta fidelidade, produzido para o ambiente Android. Assim, esse trabalho faz parte do processo de desenvolvimento de um produto de software personalizado com foco na concepção e avaliação das interfaces com o usuário. Por meio da metodologia aplicada, observaram-se indícios os quais sugerem que as interfaces propostas apresentaram-se como um recurso facilitador e capaz de contribuir para eficiência das atividades no acompanhamento do tratamento de pacientes fibromiálgicos

Processo de alimentação do Sistema de Informação do HiperDia: Estudo de Caso no município de Natal/RN

Although the records indicate the involvement of the City Christmas in the feeding system HiperDia, a survey conducted by the Health Ministry in 2004 found that the number of entries made in Natal was well below estimate. In order to understand the functioning of HiperDia, we performed this study to analyze the actions taken by the professionals involved in power system HiperDia in Natal / RN. The research has developed into a quantitative perspective, with the design of exploratory case study conducted in the health services that integrate the various levels of the organization who are directly involved with the process of system power HiperDia in Natal / RN , represented here by SMS, health districts and the Family Health Units in the period from August to October 2008.Study participants were 110 professionals, including nurses, physicians, operators, administrator and a coordinator. The survey results showed that feeding HiperDia in Natal was maintained mainly by health professionals and operators. Activities include carrying out the state registration, monitoring, and updating of data transfer routines. They report that the difficulties in the process of feeding data are related to the work of teams and / or lack of structure of the Program of Hypertension and Diabetes (HA and DM), the discontinuity of federal investments in improving the HiperDia and lack of training. We can see then that the process of feeding system on Christmas HiperDia therefore is developing the three levels (SMS, districts and health units), however is not matching the expectations established by MS, considering that the gaps the flow of information are undermining the end result of this process

Desenvolvimento de um modelo de gestão do conhecimento para a melhoria do processo de desenvolvimento de produtos

The knowledge management has received major attention from product designers because many of the activities within this process have to be creative and, therefore, they depend basically on the knowledge of the people who are involved in the process. Moreover, Product Development Process (PDP) is one of the activities in which knowledge management manifests in the most critical form once it had the intense application of the knowledge. As a consequence, this thesis analyzes the knowledge management aiming to improve the PDP and it also proposes a theoretical model of knowledge management. This model uses five steps (creation, maintenance, dissemination, utilization and discard) through the verification of the occurrence of four types of knowledge conversion (socialization, externalization, combination and internalization) that it will improve the knowledge management in this process. The intellectual capital in Small and Medium Enterprises (SMEs) managed efficiently and with the participation of all employees has become the mechanism of the creation and transference processes of knowledge, supporting and, consequently, improving the PDP. The expected results are an effective and efficient application of the proposed model for the creation of the knowledge base within an organization (organizational memory) aiming a better performance of the PDP. In this way, it was carried out an extensive analysis of the knowledge management (instrument of qualitative and subjective evaluation) within the Design department of a Brazilian company (SEBRAE/RN). This analysis aimed to know the state-of-the-art of the Design department regarding the use of knowledge management. This step was important in order to evaluate in the level of the evolution of the department related to the practical use of knowledge management before implementing the proposed theoretical model and its methodology. At the end of this work, based on the results of the diagnosis, a knowledge management system is suggested to facilitate the knowledge sharing within the organization, in order words, the Design department

Lógica Fuzzy para Controle de pH em um Processo Petrolífero

This work proposes the design, the performance evaluation and a methodology for tuning the initial MFs parameters of output of a function based Takagi-Sugeno-Kang Fuzzy-PI controller to neutralize the pH in a stirred-tank reactor. The controller is designed to perform pH neutralization of industrial plants, mainly in units found in oil refineries where it is strongly required to mitigate uncertainties and nonlinearities. In addition, it adjusts the changes in pH regulating process, avoiding or reducing the need for retuning to maintain the desired performance. Based on the Hammerstein model, the system emulates a real plant that fits the changes in pH neutralization process of avoiding or reducing the need to retune. The controller performance is evaluated by overshoots, stabilization times, indices Integral of the Absolute Error (IAE) and Integral of the Absolute Value of the Error-weighted Time (ITAE), and using a metric developed by that takes into account both the error information and the control signal. The Fuzzy-PI controller is compared with PI and gain schedule PI controllers previously used in the testing plant, whose results can be found in the literature.

Degradação do fungicida tiofanato metílico pelo processo foto-Fenton em reatores anular e solar

Effluents from pesticide industries have great difficulty to decontaminate the environment and, moreover, are characterized by high organic charge and toxicity. The research group Center for Chemical Systems Engineering (CESQ) at the Department of Chemical Engineering of Polytechnical School of University of São Paulo and Department of Chemical Engineering, Federal University of Rio Grande do Norte have been applying the Advanced Oxidation Processes (AOP's) for the degradation of various types of pollutants. These processes are based on the generation of hydroxyl radicals, highly reactive substances. Thus, this dissertation aims to explore this process, since it has been proven to be quite effective in removing organic charge. Therefore, it was decided by photo-Fenton process applied to the degradation of the fungicide Thiophanate methyl in aqueous system using annular reactor (with lamp Philips HPLN 125W) and solar. The samples were collected during the experiment and analyzed for dissolved organic carbon (TOC) using a Shimadzu TOC (Shimadzu 5050A e VCP). The Doehlert experimental design has been used to evaluate the influence of ultraviolet radiation, the concentrations of methyl thiophanate (C12H14N4O4S2), hydrogen peroxide (H2O2) and iron ions (Fe2+), among these parameters, was considered the best experimental conditions, [Fe2+] = 0.6 mmol/L and [H2O2] = 0.038 mol/L in EXP 5 experiment and in SOL 5 experiment, obtaining a percentage of TOC removal of 60% in the annular reactor and 75% in the solar reactor