Avaliação de metodologia de preparo de amostra de petróleo por digestão ácida auxiliada por microondas para determinação de metais por ICP-OES

This project describes a methodology optimization that would allow for a more efficient microwave assisted digestion process for petroleum samples. With the possible chance to vary various factors at once to see if any one factor was significant enough in the answers, experimental planning was used. Microwave assisted digestion allows, through the application of potency, an increasing number of collisions between the HNO3 and H2O2 molecules, favoring sample opening for complex matrixes. For this, a 24 factorial experimental planning was used, varying potency, time and the volumes for HNO3 65% and H2O2 30%. To achieve the desired answers, several elements were monitored (C, Cu, Cr, Fe, Ni, Zn and V) through Inductively coupled plasma atomic emission spectroscopy (ICP-OES). With this initial study it was noticed that the HNO3 was not a significant factor for any of the statistical studies for any of the analytes and the other 3 factors and their interactions showed statistical significance. A Box Behnken experimental planning was used taking in consideration 3 factors: H2O2 volume, time (min) and Potency (W), Nitric Acid kept at 4mL for a mass of 0,1g of petroleum. The results were extremely satisfying showing higher efficiency in the digestion process and taking in a responsibility between the answers for each analyte and the carbon monitoring was achieved in the following conditions: 7mL of H2O2, 700 Watts of potency and a reaction time of 7 minutes with 4mL de HNO3 for a mass of 0,1g of petroleum. The optimized digestion process was applied to four different petroleum samples and the analytes determined by ICP-OES

Desenvolvimento e validação de protótipo das medidas de desenvolvimento humano

To mesure the human performance is a challenge, mainly due to the multidimensional factor movement. Instruments, mostly only assess one dimension of it. Objective: To develop a prototype capable of measuring the skills of human performance and check its validity using method comparison approach. Methods: The study was divided into two stages. The first Prototype was developed and tested simultaneously with an instrument to study the Rectilinear Uniform Motion and Uniformly Miscellaneous. In the second phase the sample consisted of Paralympic basketball athletes (n=09) and karate athletes (n=31) and all agreed to the terms of participation in the research. The evaluation of performance measures was performed with the prototype, the results obtained were compared with the data calculated by a statistical package is used as a reference. Results: All variables calculated by the prototype showed no significant differences when compared with the results calculated by the reference instrument and statistical package. Conclusion: The prototype has been developed and the results obtained in laboratory and field indicate that the prototype can be used for measuring human performance measures, with immediate results without the need for a conventional computer return, provided they fulfill the criteria described

Desenvolvimento de compósito de pu de mamona com carga de resíduo de couro para isolação térmica

The standardization of the bovine skin thickness in the leather industry generates a residue known as wet-blue . At the end of twentieth century, the brazilian industry discarded about 131 thousand tons of this residue in nature, provoking a great environmental liability. In this paper is presented the analyses of the termophysical properties, thermal and volumetric expansion performance of a composite of vegetable resin of castor oil plant (Ricinus communis) with load of industrial residue of leather "wet-blue", for application as thermal isolation material of warm surfaces. There were considered four percentile levels of residue load in the proportions in mass of 0%, 5%, 10% and 15%, added to the expansible resin of castor oil plant in two configurations: sawed leather and crushed leather in a smaller particle (powder) by grinding in a mill of balls. Twenty-one proof bodies were produced for termophysical properties analysis (three for each configuration) and four proof bodies for rehearsals of thermal acting. Analyses of thermal acting were done in test cameras. The results of the rehearsals were compared to those obtained considering the castor oil plant foam without residue addition. A small reduction of the thermal conductivity of the composite was observed in the proportion of 10% of leather residue in both configurations. Regarding thermal conductivity, calorific capacity and diffusivity, it was verified that the proposed composite showed very close values to the commercial insulating materials (glass wool, rock wool, EPS). It was still demonstrated the technical viability of the use of composite as insulating thermal for systems of low potency. The composite presented larger volumetric expansion with 15% of sawed residue of leather.

Desempenho de um veículo flex em bancada dinamométrica de chassi

Flex-fuel vehicles are equipped with Otto Cycle internal combustion engines and have the capability of functioning with more than one type of fuel, mixed at the same tank and burned in the combustion chamber simultaneously. This sort of motorization is a world pattern due to the scarcity of petroleum, the trade of several types of fuels, technology advances and the restriction imposed to gas emissions to the atmosphere. In Brazil, the Flexfuel vehicles are a reality, specially the ones using fuel with 20 to 25% anhydrous alcohol mixed with gasoline and those that use natural gas or original liquid fuel (gasoline or hydrated ethanol). The Brazilian model Fiat Siena, the object of this present scientific investigation, is equipped with a unique electronic central capable of managing the liquid or gaseous fuels. The purpose of this research was to perform a comparative analysis in terms of performance (in terms of both potency and consumption) of a tetra-fuel vehicle - using a chassis dynamometer, operating with different fuels: common gasoline, premium gasoline, Podium gasoline, ethanol or natural gas. It became necessary to develop a bench of tests and trials procedures, as well as to know the functioning of the electronic management of the vehicle under analysis. The experiments were performed at the automotive laboratory in CTGAS-ER (Center of Gas Technologies and Renewable energies) at the light of Brazilian standard ABNT, NBR 7024: Light on-road vehicles - measurement of fuel consumption. The essay results on specific fuel consumption using common gasoline, premium gasoline and Podium gasoline have shown similar results, both for urban and road driving cycles

Estudo das propriedades físico-químicas de biocombustíveis microemulsionados

The development of new fuels is an important field of scientific and technological activities, since much of the energy consumed in the world is obtained from oil, coal and natural gas, and these sources are limited and not renewable. Recently it has assessed the employment of microemulsions as an alternative for obtaining fuel isotropic between phases originally not miscible. Among many advantages, emphasizes the application of substances that provide the reduction of levels of emissions compared to fossil fuels. Thus, this work was a study of various microemulsified systems, aiming to check the performance of the winsor regions front of the use of surfactants: RENEX 18 → 150, UNITOL L-60 → L-100 and AMIDA 60, together with structure of esters from soybean and castor bean oils. From the results it were chosen four systems to physico-chemical analyzes: System I RENEX 60, Soil bean oil, methylic ester (EMOS) and water; System II RENEX 60/AMIDA 60, EMOS and water; System III RENEX 70, mamona oil methylic ester (EMOM) and water and System IV RENEX 95, EMOM and water. The tests of physico-chemical characterization and study of temperature increase were done with nine points with different compositions in a way to include the interest area (microemulsion W/O). After this study, was conducted a modeling to predict the viscosity, the property is more varied as function of compositions systems changes. The best results were the systems II and IV with a temperature stability above 60°C. The system I had its physico-chemical characterization very similar to a fossil fuel. The system II was the best one due to its corrosivity be stable. In the modeling the four systems had shown good, with an error that varied between 5 and 18%, showing to be possible the viscosity prediction from the composition of the system. The effects the microemulsion and the engine´s performance with the microemulsion were also avaliated. The tests were performed in a cycle-diesel engine. The potency and consumption were analysed. Results show a slight increase the rendiment fuel compared with the conventional as well as a decrease in specific consumption

O cinema como educação do olhar

The knowledge is only possible due to we exist bodily. However, during the educational experience, the epistemic potency of the body is neglected, declining the registers of the intelligibility. The current thesis approaches that problem obliquely: from a body and image philosophy which has revealed other ways of doing those registers in the modernity – understood not as period itself, but as a qualification for the negotiations between the real and the intelligible. The referred ways are explored through Merleau- Ponty’s and Michel Foucault’s works, which offer a spectrum about that new negotiation of the real. In order to approach the studied problem, the visibility and the human body motricity in the cinema are taken as analysis object. The mentioned objects have been analyzed through a corpus of movies of which plots are centered at the formal education and they require from the characters and the spectators engagement into a visual performance. Aiming to approach the object, it is questioned how the Education phenomenon is represented by the cinema; how the body is exposed and how spectators can see it. Analyzing the corpus and articulating Merleau- Ponty’s and Michel Foucault’s theories, it has been possible to state the following thesis: the cinema as an education of the gaze. The general objective of this study is to reveal the educational potency of the filmic experience, which provides a new path of intelligibility for Education. In that sense, the body as a visual operator widens the capacity of understanding the real. The current work is divided in three chapters. The first one brings the methodological approach: it is pointed how the theoretical articulation is properly arranged; it explains the method of using the images as indirect language as part of the reality description; the filmic corpus is presented, as well the criteria for the films choices and for the construction of instrument adopted during the object analysis are described. In the second chapter, it is problematized the incapacity of the western society of formulating the real discursively by debating Merleau-Ponty’s and Foucault’s theoretical contributions about the visual performance displayed on the images while the films are watched and analyzed. In the third chapter, the implications of the education of the gaze provided by the cinema are developed, mainly concerning about the place attributed to the visibility during the formulation of the real. Finally, paths are designed for the construction of another approach for the visibility in Education. Assuming the gaze as an experience of knowledge, this study aims to present other ways of being, seeing, thinking and feeling the world. Therefore, it is a proposal to reset the epistemic and subjectification patterns at the educational context.

Atividade eletroencefalográfica de pacientes com acidente vascular cerebral na aprendizagem motora de um jogo baseado em realidade virtual

Stroke is the leading cause of long-term disability among adults and motor relearning is essential in motor sequelae recovery. Therefore, various techniques have been proposed to achieve this end, among them Virtual Reality. The aim of the study was to evaluate electroencephalographic activity of stroke patients in motor learning of a virtual reality-based game. The study included 10 patients with chronic stroke, right-hande; 5 with left brain injury (LP), mean age 48.8 years (± 4.76) and 5 with injury to the right (RP), mean age 52 years (± 10.93). Participants were evaluated for electroencephalographic (EEG) activity and performance while performing 15 repetitions of darts game in XBOX Kinect and also through the NIHSS, MMSE, Fugl-Meyer and the modified Ashworth scale. Patients underwent a trainning with 45 repetitions of virtual darts game, 12 sessions in four weeks. After training, patients underwent reassessment of EEG activity and performance in virtual game of darts (retention). Data were analyzed using ANOVA for repeated measures. According to the results, there were differences between the groups (PD and PE) in frequencies Low Alpha (p = 0.0001), High Alpha (p = 0.0001) and Beta (p = 0.0001). There was an increase in alpha activation powers and a decrease in beta in the phase retention of RP group. In LP group was observed increased alpha activation potency, but without decrease in beta activation. Considering the asymmetry score, RP group increased brain activation in the left hemisphere with the practice in the frontal areas, however, LP group had increased activation of the right hemisphere in fronto-central areas, temporal and parietal. As for performance, it was observed a decrease in absolute error in the game for RP group between assessment and retention (p = 0.015), but this difference was not observed for LP group (p = 0.135). It follows then that the right brain injury patients benefited more from darts game training in the virtual environment with respect to the motor learning process, reducing neural effort in ipsilesionais areas and errors with the practice of the task. In contrast, patients with lesions in left hemisphere decrease neural effort in contralesionais areas important for motor learning and showed no performance improvements with practice of 12 sessions of virtual dart game. Thus, the RV can be used in rehabilitation of stroke patients upper limb, but the laterality of the injury should be considered in programming the motor learning protocol.

Avaliação de metodologia de preparo de amostra de petróleo por digestão ácida auxiliada por microondas para determinação de metais por ICP-OES

This project describes a methodology optimization that would allow for a more efficient microwave assisted digestion process for petroleum samples. With the possible chance to vary various factors at once to see if any one factor was significant enough in the answers, experimental planning was used. Microwave assisted digestion allows, through the application of potency, an increasing number of collisions between the HNO3 and H2O2 molecules, favoring sample opening for complex matrixes. For this, a 24 factorial experimental planning was used, varying potency, time and the volumes for HNO3 65% and H2O2 30%. To achieve the desired answers, several elements were monitored (C, Cu, Cr, Fe, Ni, Zn and V) through Inductively coupled plasma atomic emission spectroscopy (ICP-OES). With this initial study it was noticed that the HNO3 was not a significant factor for any of the statistical studies for any of the analytes and the other 3 factors and their interactions showed statistical significance. A Box Behnken experimental planning was used taking in consideration 3 factors: H2O2 volume, time (min) and Potency (W), Nitric Acid kept at 4mL for a mass of 0,1g of petroleum. The results were extremely satisfying showing higher efficiency in the digestion process and taking in a responsibility between the answers for each analyte and the carbon monitoring was achieved in the following conditions: 7mL of H2O2, 700 Watts of potency and a reaction time of 7 minutes with 4mL de HNO3 for a mass of 0,1g of petroleum. The optimized digestion process was applied to four different petroleum samples and the analytes determined by ICP-OES