Estudos de Durabilidade Frente ao Ataque Ácido de Compósitos Portland-Polímero para Cimentação de Poços de Petróleo

Portland-polymers composites are promising candidates to be used as cementing material in Northeastern oil wells of Brazil containing heavy oils submitted to steam injection. In this way, it is necessary to evaluate its degradation in the commonly acidizind agents. In addition, to identify how aggressive are the different hostile environments it is an important contribution on the decision of the acidic systems to be used in. It was investigated the performance of the Portland-polymer composites using powdered polyurethane, aqueous polyurethane, rubber tire residues and a biopolymer, those were reinforced with polished carbon steel SAE 1045 to make the electrochemical measurements. HCl 15,0 %, HCl 6,0 % + HF 1,5 % (soft mud acid), HCl 12,0 % + HF 3,0 % (regular mud acid) and HAc 10 % + HF 1,5 % were used as degrading environment and electrolytes. The more aggressive acid solution to the plain Portland hardened cement paste was the regular mud acid, that showed loss of weight around 23.0 %, followed by the soft mud acid, the showed 11.0 %, 15.0 % HCl with 7,0 % and, at last the 10.0 % HAc plus HF 1.5 % with just 1.0 %. The powdered polyurethane-composite and the aqueous polyurethane one showed larger durability, with reduction around 87.0 % on the loss of weight in regular mud acid. The acid attack is superficial and it occurs as an action layer, where the degraded layer is responsible for the decrease on the kinetic of the degrading process. This behavior can be seen mainly on the Portland- aqueous polyurethane composite, because the degraded layer is impregnated with chemically modified polymer. The fact of the acid attack does not have influence on the compressive strength or fratography of the samples, in a general way, confirms that theory. The mechanism of the efficiency of the Portland-polymers composites subjected to acid attack is due to decreased porosity and permeability related with the plain Portland paste, minor quantity of Ca+2, element preferentially leached to the acidic solution, wave effect and to substitute part of the degrading bulk for the polymeric one. The electrolyte HAc 10 % + HF 1,5 % was the least aggressive one to the external corrosion of the casing, showing open circuit potentials around +250 mV compared to -130 mV to the simulated pore solution to the first 24 hours immersion. This behavior has been performed for two months at least. Similar corrosion rates were showed between both of the electrolytes, around 0.01 μA.cm-2. Total impedance values, insipient arcs and big polarization resistance capacitive arcs on the Nyquist plots, indicating passivity process, confirm its efficiency. In this way, Portlandpolymers composites are possible solutions to be succeed applied to oilwell cementing concomitant submitted to steam injection and acidizing operation and the HAc 10,0 % + HF 1,5 % is the less aggressive solution to the external corrosion of the casing

Tribunal do Júri e Soberania Popular

The present work has for object the Jury under the democratic optics, looking for to demonstrate its democratic validation. The purpose of this work was to revisit the institution, in order to bring its importance while instrument of popular participation. The work presents, first, a systematic and chronological approach of the institution of the Jury and its evolution inside of Brazilian constitutional history, objectifying, with this, to approach the narrow entailing of the Jury with the constitutional postulates. After that, the constitutional principles of the Jury had been examined, looking for to establish the popular identity of the institution and its approach with the human rights system of the Brazilian Federal Constitution. More ahead, had been examined the direct participation of the society in the Jury, going deep the questions related with the election of the jurors and the jury nullification on the American Jury. Finally, had been dedicated the study of the current conjuncture of the Brazilian Jury, its problems and the possible solutions, beyond the study of the limitation's mechanisms in the constitutional principle of the popular supremacy and the reform's projects suggested for legislators and jurists. In this way, had been looked elaborate a constitutional construction of the Jury, defending its permanence in the Brasil law system, for being a fundamental guarantee to protect the freedom, moreover for being essential to validate the Democratic State of Right, for to be the materialization of the democratic principle. For opportune, it's necessary to allege that this work had been directed to the constitutional analysis of the Jury, its legitimacy and its democratic vocation, using themselves as ideological north the American Jury System and as philosophical base the social contract theory, understanding the Jury as an instrument of protection of the society front to the state supremacy and its hierarchy structure of the power

Os antagonismos da integração sul-americana na ordem jurídica brasileira

The economic regional integration is a phenomenon observed in numerous occasions inside the global economic reality. Watchful to that phenomenon, the 1988 s Brazilian constitutional order establish in its 4th article, single paragraph, the commitment to seek for the Latin- American integration, as a Fundamental Principle to the Brazilian Federative Republic. Regarding the mentioned constitutional disposition s realization, the Brazilian State celebrated, specially, the 1980 s Montevideo Treaty, creating the Latin-American Integration Association, and the 1991 s Asuncion Treaty, performing the duty to establish a common market, in sub regional level, with Argentina, Paraguay and Uruguay, called Mercado Comum do Sul. However, due to an addiction to a wrong comprehension of State s Sovereignty Principle, the Constitution imposes to the international rules an incorporation process, without providing any privilege to those ones regarding the integration constitutional disposition s realization, whether original or derived. The Brazilian s Supreme Court, as matter of fact, affirmed that it is not possible, facing the actual constitutional order, to grant any character of preference. Also in the controversies solution mechanism, responsible for the law s execution in case of its noncompliance, where found malfunctions, most notably the system s open character and its excessive procedural flexibility, in addiction to restricting the access of individuals. It follows from these findings, then, the lack of legal certainty provided by the Mercosul s legal system, considering its effects both international and within the Brazilian state. Among the possible solutions to reduce or eliminate the problem are using the practice of the so-called executive agreements in the Mercosul s original rules incorporation to the Brazilian state, the creation of a Mercosul s court of law and/or a constitutional reform

Modelagem de decisão na seleção de equipamento: um estudo usando o processo analítico hierárquico na contratação de sondas de perfuração de poços de petróleo

The main goal of this dissertation is to develop a Multi Criteria Decision Aid Model to be used in Oils and Gas perforation rigs contracts choices. The developed model should permit the utilization of multiples criterions, covering problems that exist with models that mainly use the price of the contracts as its decision criterion. The AHP has been chosen because its large utilization, not only academic, but in many other areas, its simplicity of use and flexibility, and also fill all the requirements necessary to complete the task. The development of the model was conducted by interviews and surveys with one specialist in this specific area, who also acts as the main actor on the decision process. The final model consists in six criterions: Costs, mobility, automation, technical support, how fast the service could be concluded and availability to start the operations. Three rigs were chosen as possible solutions for the problem. The results reached by the utilizations of the model suggests that the utilization of AHP as a decision support system in this kind of situation is possible, allowing a simplifications of the problem, and also it s a useful tool to improve every one involved on the process s knowledge about the problem subject, and its possible solutions

Otimização de um sistema de distribuição predial de água fria: estudo de caso

This dissertation presents a methodology to the optimization of a predial system of cold water distribution. It s about a study of a case applied to the Tropical Buzios Residential Condominium, located in the Búzio s Beach, Nísia Floresta city, the east coast of the Rio Grande do Norte state, twenty kilometers far from Natal. The design of cold water distribution networks according to Norm NBR 5626 of the ABNT - Brazilian Association of Techniques Norms, does not guarantee that the joined solution is the optimal solution of less cost. It s necessary the use of an optimization methodology, that supplies us, between all the possible solutions, the minimum cost solution. In the optimization process of the predial system of water distribution of the Tropical Búzios Condominium, is used Method Granados, that is an iterative algorithm of optimization, based on the Dynamic Programming, that supplies the minimum cost s network, in function of the piezometric quota of the reservoir. For the application of this Method in ramifies networks, is used a program of computer in C language. This process is divided in two stages: attainment of the previous solution and reduction of the piezometric quota of headboard. In the attainment of the previous solution, the minors possible diameters are used that guarantee the limit of maximum speed and the requirements of minimum pressures. The piezometric quota of headboard is raised to guarantee these requirements. In the second stage of the Granados Method, an iterative process is used and it objective is to reduce the quota of headboard gradually, considering the substitution of stretches of the network pipes for the subsequent diameters, considering a minimum addition of the network cost. The diameter change is made in the optimal stretch that presents the lesser Exchange Gradient. The process is locked up when the headboard quota of desired is reached. The optimized network s material costs are calculated, and is made the analysis of the same ones, through the comparison with the conventional network s costs

Estudo Comparativo de gráaficos de probabilidade normal para Anáalise de experimentos fatoriais não replicados

Two-level factorial designs are widely used in industrial experimentation. However, many factors in such a design require a large number of runs to perform the experiment, and too many replications of the treatments may not be feasible, considering limitations of resources and of time, making it expensive. In these cases, unreplicated designs are used. But, with only one replicate, there is no internal estimate of experimental error to make judgments about the significance of the observed efects. One of the possible solutions for this problem is to use normal plots or half-normal plots of the efects. Many experimenters use the normal plot, while others prefer the half-normal plot and, often, for both cases, without justification. The controversy about the use of these two graphical techniques motivates this work, once there is no register of formal procedure or statistical test that indicates \which one is best". The choice between the two plots seems to be a subjective issue. The central objective of this master's thesis is, then, to perform an experimental comparative study of the normal plot and half-normal plot in the context of the analysis of the 2k unreplicated factorial experiments. This study involves the construction of simulated scenarios, in which the graphics performance to detect significant efects and to identify outliers is evaluated in order to verify the following questions: Can be a plot better than other? In which situations? What kind of information does a plot increase to the analysis of the experiment that might complement those provided by the other plot? What are the restrictions on the use of graphics? Herewith, this work intends to confront these two techniques; to examine them simultaneously in order to identify similarities, diferences or relationships that contribute to the construction of a theoretical reference to justify or to aid in the experimenter's decision about which of the two graphical techniques to use and the reason for this use. The simulation results show that the half-normal plot is better to assist in the judgement of the efects, while the normal plot is recommended to detect outliers in the data

As faces da exclusão social na comunidade África - Natal, RN

This dissertation deals with the study of the faces of social exclusion at present, through a spatial section constituted of a subnormal area (the Community Africa), which groups these aspects in a limited, but revealing, context regarding such problems. Through the following chapters, inequality, exclusion, segregation, the socioeconomics of the Community Africa, and the environmental impacts identified in this community are discussed. At the end of this piece of work, alternatives of possible solutions to the community area pointed, with also the discussion of propositions related to the questions concerning the mitigation of the most relevant problems

Uma abordagem ergonômica para análise da qualidade do pescado, desde sua captura ao seu desembarque na praia, resultante da atividade dos jangadeiros de Ponta Negra - Natal/RN

The artisan fishing activity, which involves historical - cultural, environmental, social, political, economi c, among other factors, presents, nowadays, as an important source of income, creating jobs and food, contributing to the permanence of man in their own birthplace. However, the fish, considered one of the most perishable foods, requires a proper handling and conservation, from capture to its availability in the market, in order to slow the deterioration process. Thereby, this dissertation aims to study the effect of the manipulation practices on fish quality, from capture to its landing on the beach, resul ting from fisherman’s activity from Ponta Negra - Natal/RN. It also presents the purpose of analyzing the quality of the fish and propose recommendations for their proper handling and possible solutions to add value to the product, through the improvement of the quality and good handling practices. For this purpose, the methodology used was based on ergonomic analysis of their work through observational techniques and interactional with the focus group, the jangadeiros, to understand their activity and eval uated the freshness and quality of the fish by sensory analysis, and microbiological parameters and physicochemical from existing legislation Ordinance No. 185 of May 13, 1997 and RIISPOA - amended on December 1, 2007 and RDC No. 12, dated January 2, 2001. According to the results obtained in laboratory tests, it can be established, the acceptable quality of fish as the existing rules and regulations parameters , not getting significant deterioration caused by poor handling and improper storage of fish.

Estudos de Durabilidade Frente ao Ataque Ácido de Compósitos Portland-Polímero para Cimentação de Poços de Petróleo

Portland-polymers composites are promising candidates to be used as cementing material in Northeastern oil wells of Brazil containing heavy oils submitted to steam injection. In this way, it is necessary to evaluate its degradation in the commonly acidizind agents. In addition, to identify how aggressive are the different hostile environments it is an important contribution on the decision of the acidic systems to be used in. It was investigated the performance of the Portland-polymer composites using powdered polyurethane, aqueous polyurethane, rubber tire residues and a biopolymer, those were reinforced with polished carbon steel SAE 1045 to make the electrochemical measurements. HCl 15,0 %, HCl 6,0 % + HF 1,5 % (soft mud acid), HCl 12,0 % + HF 3,0 % (regular mud acid) and HAc 10 % + HF 1,5 % were used as degrading environment and electrolytes. The more aggressive acid solution to the plain Portland hardened cement paste was the regular mud acid, that showed loss of weight around 23.0 %, followed by the soft mud acid, the showed 11.0 %, 15.0 % HCl with 7,0 % and, at last the 10.0 % HAc plus HF 1.5 % with just 1.0 %. The powdered polyurethane-composite and the aqueous polyurethane one showed larger durability, with reduction around 87.0 % on the loss of weight in regular mud acid. The acid attack is superficial and it occurs as an action layer, where the degraded layer is responsible for the decrease on the kinetic of the degrading process. This behavior can be seen mainly on the Portland- aqueous polyurethane composite, because the degraded layer is impregnated with chemically modified polymer. The fact of the acid attack does not have influence on the compressive strength or fratography of the samples, in a general way, confirms that theory. The mechanism of the efficiency of the Portland-polymers composites subjected to acid attack is due to decreased porosity and permeability related with the plain Portland paste, minor quantity of Ca+2, element preferentially leached to the acidic solution, wave effect and to substitute part of the degrading bulk for the polymeric one. The electrolyte HAc 10 % + HF 1,5 % was the least aggressive one to the external corrosion of the casing, showing open circuit potentials around +250 mV compared to -130 mV to the simulated pore solution to the first 24 hours immersion. This behavior has been performed for two months at least. Similar corrosion rates were showed between both of the electrolytes, around 0.01 μA.cm-2. Total impedance values, insipient arcs and big polarization resistance capacitive arcs on the Nyquist plots, indicating passivity process, confirm its efficiency. In this way, Portlandpolymers composites are possible solutions to be succeed applied to oilwell cementing concomitant submitted to steam injection and acidizing operation and the HAc 10,0 % + HF 1,5 % is the less aggressive solution to the external corrosion of the casing