Provas de carga estática com carregamento lateral em estacas escavadas hélice contínua e cravadas metálicas em areia

An experimental study has been conducted to investigate the behavior of continuous flight auger (cfa) bored piles and metalic driven H-section piles under lateral loading in cohesionless soils. The piles were tested in two different areas at the same site. Both areas consisted of a 3-m thick compacted superficial fill of pure fine sand, underlain by layers of naturally occurring pure fine-thick sand. Fills are differentiated by the relative densities which were compressed, 45% e 70%, respectively. Each area received one identical pair of cfa piles and two identical pairs of H-piles. A static lateral loading test was performed in each pair of piles. In this work, the pile load test results are reported and interpreted. The horizontal coefficient of subgrade reaction was determined from the results of the loading tests and compared with values determined by correlations based on penetration resistance index of SPT tests (NSPT). p-y formulations describing the static behavior of the piles were applied to the problem under evaluation. Back Analyses were made through theoretical and experimental p-y curves for obtaining input parameters for the analytic models, among which the coefficient of horizontal reaction. The soil pile system horizontal loading at rupture was determined by the theoretical methods and the results were compared with the experimental results, checking its validity

Biossorção utilizando alga marinha (sargassum sp.) aplicada em meio orgânico

In this work, biosorption process was used to remove heavy metals from used automotive lubricating oils by a bus fleet from Natal-RN-Brazil. This oil was characterized to determine the physical-chemistry properties. It was also characterized the used oil with the aim of determining and quantifying the heavy metal concentration. Fe and Cu were the metals existent in large concentration and these metals were choused to be studied in solubilization process. For the biosorption process was used the seaweed Sargassum sp for the study of influencing of the metals presents separately and with other metals. It was also studied the effect of the protonation treatment of alga with the objective to know the best efficiency of heavy metals removal. The study of the solubilization showed that the presence of more than a metal favors the solubilization of the metals presents in the oil and consequently, it favors the biosorption process, what becomes interesting the perspective application in the heavy metals removal in lubricating oils used, because the presence of more than a heavy metal favors the solubility of all metals present. It was observed that the iron and copper metals, which are present in large concentration, the protonated biosorbtent was more effective. In this study we used as biomass the marine alga Sargassum sp to study the influence of agitation velocity, temperature and initial biomass concentration on the removal of iron and copper from used lubricant oils. We performed an experimental design and a kinetic study. The experiments were carried out with samples of used lubricant oil and predetermined amounts of algae, allowing sufficient time for the mixture to obtain equilibrium under controlled conditions. The results showed that, under the conditions studied, the larger the amount of biomass present, the lower the adsorption capacity of the iron and of the copper, likely due to a decrease in interface contact area. The experimental design led us to conclude that a function can be obtained that shows the degree of influence of each one of the system variables

Avaliação de Percepção de periodontistas, protesistas, ortodontistas e leigos sobre parâmetros periodontais relacionados à estética do sorriso

The concept of facial esthetics has been increasingly diffused, being of interest to both the general public and the surgeon-dentists. However the difficult standardization and high variability in parameters aesthetic existing in the literature result in a huge difference of opinions between professionals and layperson. In this way, objective of this research was to evaluate the perception of periodontistas, protesistas, orthodontists and layperson about aesthetics smile. The sample included 30 periodontistas, 30 protesistas, 31 orthodontists and 37 layperson. The data collection was performed through an interview indirect, by the site, which had fifteen photos to be assessed by the participants. Each photograph was intentionally modified, with four increments 1mm for each amendment, in the program Adobe Photoshop CS2 version 9.0, adding-four aesthetic alterations: exposure gingival, recession gingival, absence of papilla and contour gingival. The smile for periodontistas, 3mm for orthodontists and laity and 4mm for protesistas. And changes in recession gingival, have undertaken the aesthetics of smiling from 2mm in accordance with the periodontistas and protesistas and 4mm for orthodontists and lay people. The end of the research was possible to conclude that the perception of periodontistas, protesistas, orthodontists and layperson are different in relation to aesthetics smile, and that among the changes in the research evaluated the papilla and recession have undertaken the aesthetics of smile