Caracterização geológica, geomorgológica e geotécnica de um corpo de dunas na cidade de Natal-RN

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Modelagem numérica de escoamento em padrão anular com transferência de calor e massa

Annular flow is the prevailing pattern in transport and energy conversion systems and therefore, one of the most important patterns in multiphase flow in ducts. The correct prediction of the pressure gradient and heat transfer coefficient is essential for optimizing the system s capacity. The objective of this work is to develop and implement a numerical algorithm capable of predicting hydrodynamic and thermal characteristics for upflow, vertical, annular flow. The numerical algorithm is then complemented with the physical modeling of phenomena that occurs in this flow pattern. These are, turbulence, entrainment and deposition and phase change. For the development of the numerical model, axial diffusion of heat and momentum is neglected. In this way the time-averaged equations are solved in their parabolic form obtaining the velocity and temperature profiles for each axial step at a time, together with the global parameters, namely, pressure gradient, mean film thickness and heat transfer coefficient, as well as their variation in the axial direction. The model is validated for the following conditions: fully-developed laminar flow with no entrainment; fully developed laminar flow with heat transfer, fully-developed turbulent flow with entrained drops, developing turbulent annular flow with entrained drops, and turbulent flow with heat transfer and phase change

Um estudo na teoria do movimento brownianno com viscosidade variável

In this work we investigate the stochastic behavior of a large class of systems with variable damping which are described by a time-dependent Lagrangian. Our stochastic approach is based on the Langevin treatment describing the motion of a classical Brownian particle of mass m. Two situations of physical interest are considered. In the first one, we discuss in detail an application of the standard Langevin treatment (white noise) for the variable damping system. In the second one, a more general viewpoint is adopted by assuming a given expression to the so-called collored noise. For both cases, the basic diffententiaql equations are analytically solved and al the quantities physically relevant are explicitly determined. The results depend on an arbitrary q parameter measuring how the behavior of the system departs from the standard brownian particle with constant viscosity. Several types of sthocastic behavior (superdiffusive and subdiffusive) are obteinded when the free pamameter varies continuosly. However, all the results of the conventional Langevin approach with constant damping are recovered in the limit q = 1

Influência da adição de resíduo de caulim nas propriedades tecnológicas de uma massa padrão de porcelanato produzido em escala industrial

VARELA, M. L. et al. Influência da adição de resíduo de caulim nas propriedades tecnológicas de uma massa padrão de porcelanato produzido em escala industrial. Cerâmica, v.55, n.334 p.209-215. 2009.ISSN 0366-6913.Disponível em: . Acesso em: 06 out. 2010.

A esquina do povo de alt’lam: aprimoramento racial e moral no movimento espírita natalense

A partir de um conjunto de dados obtidos em pesquisa, o texto deseja salientar uma face pouco examinada pelos estudiosos do espiritismo no Brasil: aquela dos grupos espíritas que cultuam extraterrestres. Examina a narrativa Rebelião de Lúcifer, escrita pelo médium potiguar Jan Val Ellam. Sustenta que esta atualiza noções importantes em relação a narrativas de salvação anteriores construídas pelo espiritismo. Destaca em especial o aprimoramento racial e moral através da reencarnação em distintos corpos humanos e em diferentes planetas. Examina-os a partir das noções de exílio planetário e de evolução racializada. Argumenta que Jan Val Ellam as atualiza através da categoria nativa Povo de Alt’Lam e através de bricolagem com outros campos semânticos, notadamente a ufologia e a fi cção científica

Twitter e ciberativismo: o movimento social da hashtag #ForaMicarla em Natal-RN

The spatial and temporal fluidity conditioned by the technologies of social interaction online have been allowing that collective actions of protest and activism arise every day in cyberspace - the cyber-activism. If before these actions were located in geographical boundaries, today's demands and mobilizations extrapolate the location, connect to the global, and at the same time, return to the regional through digital virtuality. Within this context of the relationship between digital technology and global flow of sociability, emerges in October 2010 the social movement of the hashtag "#ForaMicarla", which means the dissatisfaction of cibernauts from Natal of Twitter with the current management of the municipality of Natal-RN, Micarla de Sousa (Green Party). We can find in the center of this movement and others who appeared in the world at the same time a technological condition of Twitter, with the hashtag "#". Given this scenario, this research seeks to analyze how the relationship of the agents of movement hashtag "ForaMicarla", based on the principle that it was formed in the Twitter network and is maintained on the platform on a daily basis, it can create a new kind of political culture. Thus, this study discusses theoretically the importance of Twitter and movements that emerge on the platform and through it to understand the social and political demands of the contemporary world and this public sphere, which now seems to include cyberspace

Turismo cultural na ZEPH-Ribeira: possibilidades e limitações

Considering that urban interventions, planned and executed recently at Natal, RN, should put Ribeira - one of the town centers - in the new limits of the expanded center of the city, this work examines the use of this new accessibility for the benefit of the development of an infrastructure to support a type of tourism currently seen as an alternative to diversification into areas dominated by entertainment tourism (the case of Natal). A local with city's traditional cultural facilities and holder of a set built that is a synthesis of the images of the neighborhood, it fears that this increase in the potential for movement and flows of use stimulate speculation and deployment of a bulk type of activity incompatible with the preservation the architectural heritage. Important economy for the city, tourism has been showing a factor propellant processing urban related changes in accessibility. It is argued that cultural tourism, often used in plans and projects of revitalization across the country, may be factor for sustainable development and conserve the assets, and contributes to the process of revitalization of the historic cultural center as Ribeira. Intended to illustrate the need to consider other information that might help in the revitalization of the neighborhood, this research presents the offer cultural tourism of Ribeira and identifies and maps certain physical attributes that, combined with functional attributes, can stimulate or inhibit the diversity and vitality in the region

Influência do lodo de ETE na massa para fabricação de cerâmica vermelha

The WTP produce many kinds of residue on your treatment stages, but the sludge is the more problematic from the final disposition point view. The actual rate of residue production deriving from technological evolution and the crescent population needs prevents the subtle equilibrium generation between consumption and recycling/reuse, creating problems of pollution resulting from inappropriate management of residues. Thus, is necessary achieve a new equilibrium between the grow from raw materials and energy and the residue generation. This equilibrium should be achieved by technical and economic feasibility of environmental supported models through recycling and reuse. The red ceramic industry stand out in residue absorption question as raw material due their clay mass heterogeneity, constituted by clay minerals and non-clay minerals with wide mineralogical variation, allowing residue inclusion which act like plastic or non-plastic materials, contributing to retain heavy metals contained in residues in the vitreous mass formed during the burning of the ceramic bodies. This work propose the study of the influence of incorporation of 25 wt.% sludge from wastewater treatment plant, according preliminary results, in the mass to produce ceramic bodies. The raw materials was characterized through chemical composition analyses by XRF, mineralogical analyses by XRD, thermal analyses by TG and DTA, Atterberg limits and thermodilatometry. Subsequently was composed the mass with 75 wt.% of clay and 25 wt.% of dried wastewater sludge from UFRN WWTP. Samples with 6,0 x 2,0 x 0,5 cm was produced with unidirectional compacting under pressure of 20MPa and burned in temperatures between 950 and 1,200ºC. After fired, the ceramic bodies have been submitted to physical and mechanical analyses through the measure of firing shrinkage, water absorption, density, apparent porosity and flexural strength; crystallographic analyses through XRD and microstructure analyses by SEM. The technological properties obtained was satisfactory to production of roof tiles with 25 wt.% at 1,200 ºC, but the production of others products at lower temperatures was not feasible

Efeito da adição de carbonatos em formulação de massa para revestimento cerâmico utilizando matérias-primas do Piauí

Piauí state is a major producer of traditional red ceramic burning as bricks, tiles and ceramic tiles, with its main production center located in the city of Teresina. The state has large reserves of raw materials that can be used in the ceramic coating as clays, quartz, talc and carbonates. However, in the preparation of ceramic bodies using only a mixture of clays with different characteristics. The study aims to evaluate the effect of adding two types of carbonates in the ceramic semiporous mass coating produced in Piauí and then to verify the potential use of these carbonates as supplementary raw material product manufactured or the feasibility of obtaining a ceramic plate that meets the specifications for the porous coating. For this, were characterized the ceramic Piauí coating mass, a calcitic carbonate and a dolomitic, were made in the levels of 2, 4, 8, 16, and 32%. The masses were formed by pressing and burneds in two environments: a laboratory furnace (1080°C, 1120°C, 1140°C, and 1160°C) and an industrial furnace (1140°C). Then, following tests of linear shrinkage water absorption, apparent porosity, bulk density and flexural strength. Furthermore, the fired specimens were tested for their macrostructure and microstructure. The results showed the possibility of using the carbonate in ceramic mass flooring produced in Piauí, as added in small proportions improved dimensional stability and increased mechanical strength of ceramics pieces. It also proved itself possible to produce porous coating when added in higher levels

Estudo de massa cerâmica triaxial visando à otimização do ciclo de queima da indústria de cerâmica estrutural

Over recent years the structural ceramics industry in Brazil has found a very favorable market for growth. However, difficulties related to productivity and product quality are partially inhibiting this possible growth. An alternative for trying to solve these problems and, thus, provide the pottery industry the feasibility of full development, is the substitution of firewood used in the burning process by natural gas. In order to contribute to this process of technological innovation, this paper studies the effect of co-use of ceramic phyllite and kaolin waste on the properties of a clay matrix, verifying the possible benefits that these raw materials can give to the final product, as well as the possibility of such materials to reduce the heat load necessary to obtain products with equal or superior quality. The study was divided into two steps: characterization of materials and study of formulations. Two clays, a phyllite and a residue of kaolin were characterized by the following techniques: laser granulometry, plasticity index by Atterberg limits, X-ray fluorescence, X-ray diffraction, mineralogical composition by Rietveld, thermogravimetric and differential thermal analysis. To study the formulations, specifically for evaluation of technological properties of the parts, was performed an experimental model that combined planning involving a mixture of three components (standard mass x phyllite x kaolin waste) and a 23 factorial design with central point associated with thermal processing parameters. The experiment was performed with restricted strip-plot randomization. In total, 13 compositional points were investigated within the following constraints: phyllite ≤ 20% by weight, kaolin waste ≤ 40% by weight, and standard mass ≥ 60% by weight. The thermal parameters were used at the following levels: 750 and 950 °C to the firing temperature, 5 and 15 °C/min at the heating rate, 15 and 45min to the baseline. The results showed that the introduction of phyllite and/or kaolin waste in ceramic body produced a number of benefits in properties of the final product, such as: decreased absorption of water, apparent porosity and linear retraction at burn; besides the increase in apparent specific mass and mechanical properties of parts. The best results were obtained in the compositional points where the sum of the levels of kaolin waste and phyllite was maximal (40% by weight), as well as conditions which were used in firing temperatures of 950 °C. Regarding the prospect of savings in heat energy required to form the desired microstructure, the phyllite and the residue of kaolin, for having small particle sizes and constitutions mineralogical phases with the presence of fluxes, contributed to the optimization of the firing cycle.

Adição de subprodutos da cinza da casca de café (coffea canephora) em massa cerâmica para porcelanato

To produce porcelain tiles fluxing agents are used in order to obtain a liquid phase during firing. This liquid phase fills the pores decreasing porosity, water absorption and contributes to material densification. In the porcelain tiles industry, feldspar is the main flux material used, with quantities ranging between 35 and 50%. Studies focus on the discovery of materials with flux characteristics that can reduce the consumption of feldspar by porcelain tiles industry. In this context, the coffee husk ashes, a residue obtained when coffee husks are burned to produce heat for the dryers during the processing of the green fruit, have as main chemical constituents potassium, calcium and magnesium, giving them characteristics of fluxing material. Brazil is the largest coffee producer in the world and is responsible for over 30% of the world s production. In this work a physical treatment of coffee husk ash was carried out in order to eliminate the organic matter and, after this, two by-products were obtained: residual wastes R1 and R2. Both residues were added separately as single fluxes and also in association with feldspar in mixtures with raw materials collected in a porcelain industry located in Dias d Ávila-Ba. The addition of these residues aimed to contribute to the reduction of the consumption of feldspar in the production of porcelain tiles. Specimens were produced with dimensions of 60 mm x 20 mm x 6 mm in an uniaxial die with compacting pressure of 45 MPa. The samples were heated to a temperature of 1200 °C, for 8 minutes. Tests were performed to characterize the raw materials by XRF, XRD, particle size analysis, DTA and TGA and, additionally, the results of the physical properties of water absorption, apparent porosity, linear shrinkage, density, dilatometry, flexural strength and SEM of sintered body were analyzed. Additions of less than 8% of the residue R1 contributed to the decrease of porosity, but the mechanical strength of the samples was not satisfactory. Additions of 5% the R2 residue contributed significantly to decrease the water absorption and apparent porosity, and also to increase the mechanical strength. Samples with addition of feldspar associated with the R2 residue, in proportions of 6.7% of R2 and 6.7% of feldspar, led to results of water absorption of 0.12% and mechanical strength of 46 MPa, having parameters normalized to the manufacture of porcelain stoneware tiles

Juventude universitária nos anos 1980: as práticas culturais do movimento estudantil na UFRN

The 1980s, at UFRN represented a moment of resumption of student struggles. The major goals of the student movement in this period was the fight against the authoritarian regime and for the democracy within and outside the university. In this context, events, activities, artistic and cultural productions were organized in order to make a critical policy for the procedure, trying to establish a dialogue between the university community and the population. Our work has made a research on cultural practices of the student movement in the 1980s. We did an analysis on the process of democratic transition in Brazil, the political participation of youth, their cultural practices in the country, society and politics in the RN, the student movement at UFRN and its cultural practices. We also discussed the concept of culture and cultural practices, but also pointed each of the the main activities and cultural productions organized by students of UFRN in that period. As methodological resource, were used the oral sources, the academic literature on the subject and newspaper pieces, newsletters and advertisement material of the students

Organização e institucionalização política do movimento negro de Uberlândia(MG)

Este trabajo forma parte de una investigación cualitativa empírica que se ha realizado con el Movimiento Negro en Brasil, sobre todo en Uberlandia (MG), en busca de Políticas Públicas para la Promoción de la Igualdad Racial y sus conflictos históricos con la sociedad brasileña entre los años 1980 , 1990 y 2009. En cuanto a los objetivos generales destacan la variación en la forma de organización social y política de la comunidad Uberlandense negro, ya que es un ejemplo de los patrones de producción de la organización política y las correlaciones entre las múltiples formas de organización política de la población por la política pública Promoción de la Igualdad Racial, aprobada por el legislativo y constitucional

Gênero ou sexualidade?: (re) produção das identidades homoeróticas masculinas no cinema de massa

Homosexuality has been gaining strength in Cinema from the late twentieth century, when there is a dissemination of freedoms around the peripheral or marginal sexualities. Based on this assumption, it was formulated in the dissertation work, an analysis of the relationship between Cinema and Sexuality in order to understand, describe, reflect and analyze possible changes around the performative behaviors of male homosexual from the introduction of them in film production, arising from the mass culture industry. These productions are located in three different decades. In this case, the Cinema has not only the reproductive character of realities, but also a producing agent and consolidating them. The methodology applied was discourse analysis of three film works, namely La Cage aux Folles (1978), In & Out (1997) and Boat Trip (2002). The image, research object of this work, is developed by a mass culture that will produce mass identities which is characterized by crystallization of clichés around the gay world

A trajetória dos movimentos socioambientais em Sergipe : personagens, instituições e estratégias de comunicação

The research aimed to study the emergence, role, and the possibilities of environmental movements in Sergipe, running through an analysis of the period between 1983 and 2011. This goal has been guided by the core issue of research, which was to analyze the relationship between the mission, structure and action of environmental organizations in Sergipe. The research arose from the need to map and critically evaluate the environmental movement in Sergipe. The methodological procedures focused on the literature search, survey papers in Sergipe a time gap of 28 years, detailed analysis of nine "movements" and selected in-depth interviews, semi-structured interviews with dozens of social actors involved in the area. In conclusion, we observed that environmentalism in Sergipe, from its inception, was associated with recovery of consciousness regarding the environment, to combat local problems of degradation, and the search for legitimacy of public opinion. Although the environmental movement have been, at times, the attention of mass media, the movement failed to leave the niche and achieve a more representative portion of society. You can still see the deep relationship between the profile of environmental leaders, capital strength and the practical results of the environmental actions and finally, it was observed that the action of the movements has much stronger bond with the relationship of the organization and its main leaders with the other "environmentalist," than with the structure and mission of the institution