Estudo da incorporação de resíduo industrial polimérico ao CAP

This work presents the incorporation of an industrial polymeric waste into a petroleum asphalt cement with penetration grade 50-60 (CAP 50-60). The main goal of this research is the development of a polymer-modified asphalt, with improvements in its physical properties, in order to obtain a more resistant material to the traffic loads. Furthermore, the use of this polymeric waste will result in economic and environmental benefits. The CAP 50-60 used in this research was kindly supplied by LUBNOR Lubrificantes e Derivados de Petróleo do Nordeste (produced in Fazenda Belém Aracati - Ceará) and the industrial polymeric waste was provided by a button manufacturer industry, located in Rio Grande do Norte state. This polymeric waste represents an environmental problem due to its difficulty in recycling and disposal, being necessary the payment by the industry to a landfill. The difficulty in its reuse is for being this material a termofixed polymer, as a result, the button chips resulting from the molding process cannot be employed for the same purpose. The first step in this research was the characterization of the polymeric waste, using Differential Scanning Calorimetry (DSC) Infrared spectroscopy (IR spectroscopy), and Thermogravimetric analysis (TGA). Based on the results, the material was classified as unsaturated polyester. After, laboratory experiments were accomplished seeking to incorporate the polymeric waste into the asphalt binder according to a 23 experimental factorial design, using as main factors: the polymer content (2%, 7% and 14%), the temperature of the mixture (140 and 180 oC) and the reaction time (20 and 60 minutes). The characterization of the polymer-modified asphalt was accomplished by traditional tests, such as: penetration, ring and ball softening point, viscosity, ductility and flash point temperature. The obtained results demonstrated that the addition of the polymeric waste into the asphalt binder modified some of its physical properties. However, this addition can be considered as a feasible alternative for the use of the polymeric waste, which is a serious environmental and technological problem.

Tributos indiretos na cadeia produtiva do camarão

The state of Rio Grande do Norte counts with a relevant potential in the shrimp farming supply chain. In the larviculture step the state responds for more than half of the national production. In the farming step it is the second largest producer. In the industrial step, its industries have almost 40% of the shrimp processing capacity of the northeast of Brazil. However, this country has the highest tax rate comparing with the main shrimp producer countries. Considering the influence of taxes in the competition among companies, the main goal of this research is to analyze the impact of indirect taxes in the above steps of the supply chain. To achieve it, it will be used the data of the 2011 Census of the Shrimp Farming and it will be applied the Herfindahl-Hirschman Index to identify the market form of those steps. In order to contribute with the characterization of the supply chain, CEO´s of farms and industries will be interviewed. The price-elasticity of the shrimp larvae, the in natura shrimp and the processed shrimp will be analyzed in order to verify the possibility that each one of those three steps has to pass-through the onus of the end of benefit over the ICMS. The data analysis shows that the larviculture step functions as a duopoly and, facing the end of that benefit, it will be able to pass-through most its onus to the farming step. On the other hand, this step functions similar to a perfect competing market, which diminishes its capacity to pass-through that onus to the processing step. This step operates as oligopoly with a lower concentration than the larviculture step but, due to the fact that it faces an oligopsony, it will end up assuming most of that onus, which will cause a decrease in the amount of processed shrimp. It is concluded that the end of that benefit would impact negatively, in this state, the supply chain at all, but mainly the farming and the industrial steps

Intervenções urbanas em espaços de desvalia. Transformar para valorizar.

The worldwide transformations that took place in the 20th century redefined the cities fate in this new century. The consolidation of urbanization, the technological revolution that fostered globalization, the economic restructuration and informalization, modified space and time concepts, bringing populations closer together and provoking political transformations. They made contemporaries cities protagonists of world events and as a consequence of such processes, worthlessness spaces appeared and cities all over the world started to bet on the strategy of acting in this problematic areas through initiatives aimed at promoting intentional transformations to obtain a multidimensional valorization urban, financial, environmental, cultural and social. In short, such urban initiatives intend to make cities more competitive, sustainable, creative, productive and fair. Also in Brazil, countless worthless spaces appeared in waterfronts, central areas, and deactivated industrial/urbanized areas, as well as in sub-used or misused areas lacking infrastructure and public services where it is imperative and urgent to perform urban initiatives. This research proposes as a thesis that urban initiatives, when carried out based on an adequate politicalinstitutional model, transform and give value to worthless spaces in their multiple dimensions, offering better quality of life to their residents and helping to fulfill the social role of the city. We intend to prove this thesis through the analysis of national and international cases and by introducing thoughts, critique and guidelines as a contribution to the improvement of the urban initiatives implementation processes, in particular to those regarding worthless areas of Brazilian cities

Efeito da adição de carbonatos em formulação de massa para revestimento cerâmico utilizando matérias-primas do Piauí

Piauí state is a major producer of traditional red ceramic burning as bricks, tiles and ceramic tiles, with its main production center located in the city of Teresina. The state has large reserves of raw materials that can be used in the ceramic coating as clays, quartz, talc and carbonates. However, in the preparation of ceramic bodies using only a mixture of clays with different characteristics. The study aims to evaluate the effect of adding two types of carbonates in the ceramic semiporous mass coating produced in Piauí and then to verify the potential use of these carbonates as supplementary raw material product manufactured or the feasibility of obtaining a ceramic plate that meets the specifications for the porous coating. For this, were characterized the ceramic Piauí coating mass, a calcitic carbonate and a dolomitic, were made in the levels of 2, 4, 8, 16, and 32%. The masses were formed by pressing and burneds in two environments: a laboratory furnace (1080°C, 1120°C, 1140°C, and 1160°C) and an industrial furnace (1140°C). Then, following tests of linear shrinkage water absorption, apparent porosity, bulk density and flexural strength. Furthermore, the fired specimens were tested for their macrostructure and microstructure. The results showed the possibility of using the carbonate in ceramic mass flooring produced in Piauí, as added in small proportions improved dimensional stability and increased mechanical strength of ceramics pieces. It also proved itself possible to produce porous coating when added in higher levels

Reconfiguração dinâmica de estratégias distribuídas em dispositivos foundation fieldbus para a otimização de processos na indústria do petróleo

The petrochemical industry has as objective obtain, from crude oil, some products with a higher commercial value and a bigger industrial utility for energy purposes. These industrial processes are complex, commonly operating with large production volume and in restricted operation conditions. The operation control in optimized and stable conditions is important to keep obtained products quality and the industrial plant safety. Currently, industrial network has been attained evidence when there is a need to make the process control in a distributed way. The Foundation Fieldbus protocol for industrial network, for its interoperability feature and its user interface organized in simple configuration blocks, has great notoriety among industrial automation network group. This present work puts together some benefits brought by industrial network technology to petrochemical industrial processes inherent complexity. For this, a dynamic reconfiguration system for intelligent strategies (artificial neural networks, for example) based on the protocol user application layer is proposed which might allow different applications use in a particular process, without operators intervention and with necessary guarantees for the proper plant functioning

Estudo de adsorvente obtido de terras diatomáceas para remoção de metais pesados em águas produzidas: processamento, caracterização e dinâmica em leito fixo

The acceleration of industrial growth in recent decades on all continents aroused the interest of the companies to counter the impacts produced on the environment, spurred primarily by major disasters in the petroleum industry. In this context, the water produced is responsible for the largest volume of effluent from the production and extraction of oil and natural gas. This effluent has in its composition some critical components such as inorganic salts, heavy metals (Fe, Cu, Zn, Pb, Cd, ), presence of oil and chemicals added in the various production processes. In response to impact, have been triggered by research alternative adsorbent materials for water treatment and water produced, in order to removing oils and acids and heavy metals. Many surveys of diatomaceous earth (diatomite) in Brazil involve studies on the physico-chemical, mineral deposits, extraction, processing and applications. The official estimated Jazi are around 2.5 million tonnes, the main located in the states of Bahia (44%) and Rio Grande do Norte (37,4%). Moreover, these two states appear as large offshore producers, earning a prominent role in research of adsorbents such as diatomite for treatment of water produced. Its main applications are as an agent of filtration, adsorption of oils and greases, industrial load and thermal insulator. The objective of this work was the processing and characterization of diatomite diatomaceous earth obtained from the municipality of Macaíba-RN (known locally as tabatinga) as a low cost regenerative adsorbent for removal of heavy metals in the application of water produced treatment. In this work we adopted a methodology for batch processing, practiced by small businesses located in producing regions of Brazil. The characterization was made by X-ray diffraction (XRD), scanning electron microscopy (SEM) and specific surface area (BET). Research conducted showed that the improvement process used was effective for small volume production of diatomite concentrated. The diatomite obtained was treated by calcination at temperature of 900 oC for 2 hours, with and without fluxing Na2CO3 (4%), according to optimal results in the literature. Column adsorption experiments were conducted to percolation of the in nature, calcined and calcined fluxing diatomites. Effluent was used as a saline solution containing ions of Cu, Zn, Na, Ca and Mg simulating the composition of produced waters in the state of Rio Grande do Norte, Brazil. The breakthrough curves for simultaneous removal of copper ions and zinc as a result, 84.3% for calcined diatomite and diatomite with 97.3 % for fluxing. The calcined fluxing diatomite was more efficient permeability through the bed and removal of copper and zinc ions. The fresh diatomite had trouble with the permeability through the bed under the conditions tested, compared with the other obtained diatomite. The results are presented as promising for application in the petroleum industry

Tear identitário:a prática docente em arte como conhecimento compartilhado

This investigative tissue is about the formation of identification processes of teachers and pedagogical practice of Art, in Teresina city. This search comprised the sum of the needs presented, agreed upon with the teachers engaged in the process, it was developed through the establishment of interactive environment Loom Team where collaboration and critical reflection were steering actions to promote the understanding of existing connections or relations within the processes of identifications and the pedagogical practice of Art. The tissue is formed by the polyphonic plot of the critical reflection of nine teachers of Art who engaged voluntarily and this investigation of formative nature and a production of knowledge. All these teachers have degree and the course of artistic education and especial qualification in Fine Arts and/or Drawing. The texture, which we denominated Identification Loom: The pedagogical practice of Art as share knowledge is (de) (re) construction of knowledge resulting from the critical reflection, in an environment of collaboration, which may have implications and ethical political attitudes in the pedagogical practice of the group. Within this context, we pose the following question: - How does the pedagogical practice in Art influence and/or be influenced by the identification processes of the teachers, and how do they interfere with the search and manifestation of the knowledge involved and the investment in professionalization? In view of this query, we make use of the cooperative investigation, having social history as theoretical reference and as analytic perspective of interactive and dialogical-reflexive processes. Thus, social historic theory, cooperative approach and pedagogical practice were the major components of the plot. The methodological texture counted on the threads of dialogical reflexion, of mediation and of collaboration. The conceptual formulation, the recording in videos of classes and the narratives of formations were the main threads of the analytic substrate of the investigation. With this articulation, theses threads appear as developers of processes leading to a major approximation of the thought on the identity/alterity dialectical pair of the participants involved. The language within this plot had a decisive importance in all the moments of the search of signification, embracing and connecting the identification/alterative processes, the pedagogical practice of Art and the knowledge shared. In such processes involving (de) (re) construction, one can notice a close correlation of the triad social identity, pedagogical practice and knowledge shared. For this reason, the vigotskian, guetmanovian and kopnian theoretizations were the major framework for the analysis of conceptual formulations; and, as for discourse analysis, Baktin and Orlandi were our masters. For these teachers, the experience shared throughout the process of this typology of tri-axial investigation focused the experience of many theoretical and practical assumptions. Such an experience enabled them to state that this, with collaboration, can make reflection on the practice a starting and promoting element, within the individual level of self-management, in addition to being a space of (de)(re)construction of meanings, of knowledge and of reinvention per se

Uma viagem aos saberes das formadoras de professores da Educação Infantil

This study aims to contribute with the professional development of the Trainers of childhood education teachers of the City Department of Education of Natal/RN, through a formation in context, trying to understand the teaching knowledge required in the practice of these professionals. The focus of the research is in teaching knowledge understood as the ideas, beliefs, conceptions, reasons, arguments, speeches that the trainers builds during his life (ALTET, 2001; PIMENTA, 2002; TARDIF, 2001; 2002). The study inserts itself in the qualitative approach of the educational research and the chosen methodology has characteristics of an inquiryaction. In the process, the following instruments had been used: questionnaires, press conferences, personal documents. The relevance of the present research is in achieving reflections concerning the role of the trainers of teachers, who needs to be seen as a mediator in the formation of teachers, in view of the fact that he interferes and is determinative in such a way in the formative process as in its results. The findings demonstrate that: a) the identity of the trainer is in a development process, what it is resembled to the effective situation of that, symbolically, the trainer exists, however, his attributions still are not enough clear; b) the teaching knowledge of the formation in the childhood education are related, among others points, primordially, to the function / role of the childhood education, child and teacher s point of view of this stage of the basic education; c) the Trainers teaching knowledge, concerning the teaching performance, ratifies the multiplicity of knowledge that the trainer must has, beyond the necessary complementarities and conciliation between the administrative and pedagogical aspects in the exercise of the function; d) the Trainers have knowledge that are according to the speech, consisting as declarative knowledge; e) there is a conflict between the teaching knowledge of the Trainers and the actions that are part of real life, generating contradictions between the formative saying and making

Simulador computacional para poços de petróleo com método de elevação artificial por bombeio mecânico

This work proposes a computer simulator for sucker rod pumped vertical wells. The simulator is able to represent the dynamic behavior of the systems and the computation of several important parameters, allowing the easy visualization of several pertinent phenomena. The use of the simulator allows the execution of several tests at lower costs and shorter times, than real wells experiments. The simulation uses a model based on the dynamic behavior of the rod string. This dynamic model is represented by a second order partial differencial equation. Through this model, several common field situations can be verified. Moreover, the simulation includes 3D animations, facilitating the physical understanding of the process, due to a better visual interpretation of the phenomena. Another important characteristic is the emulation of the main sensors used in sucker rod pumping automation. The emulation of the sensors is implemented through a microcontrolled interface between the simulator and the industrial controllers. By means of this interface, the controllers interpret the simulator as a real well. A "fault module" was included in the simulator. This module incorporates the six more important faults found in sucker rod pumping. Therefore, the analysis and verification of these problems through the simulator, allows the user to identify such situations that otherwise could be observed only in the field. The simulation of these faults receives a different treatment due to the different boundary conditions imposed to the numeric solution of the problem. Possible applications of the simulator are: the design and analysis of wells, training of technicians and engineers, execution of tests in controllers and supervisory systems, and validation of control algorithms

Diagnóstico regional do processo de queijo coalho comercializado em Natal/RN

Coalho cheese is a typical product of the Northeastern Brazil, which is consumed both raw and cooked. The present work aimed to study the characteristics of artisanal and industrial processes in the production of coalho cheese sold in Natal / RN in order to evaluate its quality and consumer s profile. Four artisanal cheeses plants were monitored and a questionnaire was sent to different cheese industries. Besides this, eight cheese samples (four artisanal and four industrial) were evaluated in regard to the microbiological quality, physical-chemical and sensory attributes. The sensory acceptance was evaluated by using 108 non-trained panelists by using the hedonic scale. The consumer s profile survey was applied to 400 consumers of coalho cheese. The lack of hygiene control was detected at the artisanal cheese production, which uses raw milk as its raw material. Research has shown that the industrialized cheeses are made from pasteurized milk provided by their own production or by a third party, as observed in cheese making dairies. In general, the results indicate variation in the manufacturing process of coalho cheese, which results in the lack of product standardization. Regarding the physical-chemical analysis, most artisanal and industrial samples presented moisture content between 36 and 40 %, classified as medium moisture cheese, which is the only parameter that showed no significant difference (p>0.05). However, the water activity (Aw), pH and acidity results differed significantly. All artisanal samples showed coliform contamination at 35 °C, which confirms the poor hygienic conditions. In regard to coliforms at 45 °C, 75 % of artisanal coalho cheese samples had value higher than 103 MPN / g, a value above the lawful limits determined by RDC nº 12. Fifty percent of industrial coalho cheese samples showed coagulase-positive Staphylococcus values above the limit allowed by the RDC nº 12, indicating poor handling. The sensory evaluation revealed that the taste was the only parameter that showed significant difference, and this difference was only between two industrial brands. The consumer s survey showed that the coalho cheese flavor is the most important reason for buying this kind of cheese. Although coalho cheese is mainly bought in supermarkets, open street markets and country shops are still important selling points. It is concluded that there is no coalho cheese standardization in the RN state, which leads to variations in physical-chemical and sensory attributes. Moreover, it is necessary greater hygiene control in the production and handling procedures of coalho cheese.

Aplicação da tecnologia eletroquímica como alternativa para a remoção de corante têxteis em efluentes sintéticos e reais utilizando anodos de platina e diamante

In this work, electrochemical technology was used to treat synthetic wastewater containing Methyl Red (MR) and Blue Novacron (BN) by anodic oxidation using anodes platinum (Pt) and real samples of textile effluents using DDB anodes and platinum (Pt). The removal of color from the galvanostatic electrolysis of synthetic wastewater MR and BN, and the actual sample has been observed under different conditions (different current densities and temperature variation). The investigation of these parameters was performed in order to establish the best conditions for removal of color and chemical oxygen demand (BOD). According to the results obtained in this study, the electrochemical oxidation processes suitable for the degradation process of color and COD in wastewater containing such textile dyes, because the electrocatalytic properties of Pt and BDD anodes consumption energy during the electrochemical oxidation of synthetic solutions AN and MR and real sample, mainly depend on the operating parameters of operation, for example, the synthetic sample of MR, energy consumption rose from 42,00kWhm-3 in 40 mAcm-2 and 25 C to 17,50 kWhm-3 in 40mAcm-2 and 40 C, from the BN went 17,83 kWhm-3 in 40mAcm and 40°C to 14,04 kWhm- 3 in 40mAcm-2 and 40 C (data estimated by the volume of treated effluent). These results clearly indicate the applicability of electrochemical treatment for removing dyes from synthetic solutions and real industrial effluents

Da arenga ao debate: o aprimoramento da competência argumentativa por estudantes do ensino médio

In order to understand the factors involved in the improvement process of argumentative competence by students of 2nd year of high school, we undertook a qualitative approach research and interventional nature, during which we adopted the conduct of participant observation in a school belonging to the state schools of Rio Grande do Norte, located on the outskirts of the city of Natal. The analyzed corpus consisted in the interim intervention and entails the answers to a semi-structured questionnaire, fourteen opinion articles and three regrados debates, produced by the students, in addition to video recordings of ten sessions and personal notes pertaining to another six, totaling sixteen sessions observed during the school year 2014. As the most important bibliographical references we study skills and reasoning from the perspective of discursive social interactionism. Analyzing the data we loan the principle of categorization, opting for critical-descriptive presentation and were revealed to us, via the classified evidences, that among the factors involved in the study process, it appears with more relevance to set up an effective intellectual community, which meets in constant interaction subjects, which alternate assuming the conditions of speakers and audience. The constitution of this community depends largely on the teaching mediation and is indispensable to the (re)design of the studied competence, in interactions with her the subjects afforded learn and develop their competence, reshaping the limits of their zone of proximal development.

Da arenga ao debate: o aprimoramento da competência argumentativa por estudantes do ensino médio

In order to understand the factors involved in the improvement process of argumentative competence by students of 2nd year of high school, we undertook a qualitative approach research and interventional nature, during which we adopted the conduct of participant observation in a school belonging to the state schools of Rio Grande do Norte, located on the outskirts of the city of Natal. The analyzed corpus consisted in the interim intervention and entails the answers to a semi-structured questionnaire, fourteen opinion articles and three regrados debates, produced by the students, in addition to video recordings of ten sessions and personal notes pertaining to another six, totaling sixteen sessions observed during the school year 2014. As the most important bibliographical references we study skills and reasoning from the perspective of discursive social interactionism. Analyzing the data we loan the principle of categorization, opting for critical-descriptive presentation and were revealed to us, via the classified evidences, that among the factors involved in the study process, it appears with more relevance to set up an effective intellectual community, which meets in constant interaction subjects, which alternate assuming the conditions of speakers and audience. The constitution of this community depends largely on the teaching mediation and is indispensable to the (re)design of the studied competence, in interactions with her the subjects afforded learn and develop their competence, reshaping the limits of their zone of proximal development.

Tributos indiretos na cadeia produtiva do camarão

The state of Rio Grande do Norte counts with a relevant potential in the shrimp farming supply chain. In the larviculture step the state responds for more than half of the national production. In the farming step it is the second largest producer. In the industrial step, its industries have almost 40% of the shrimp processing capacity of the northeast of Brazil. However, this country has the highest tax rate comparing with the main shrimp producer countries. Considering the influence of taxes in the competition among companies, the main goal of this research is to analyze the impact of indirect taxes in the above steps of the supply chain. To achieve it, it will be used the data of the 2011 Census of the Shrimp Farming and it will be applied the Herfindahl-Hirschman Index to identify the market form of those steps. In order to contribute with the characterization of the supply chain, CEO´s of farms and industries will be interviewed. The price-elasticity of the shrimp larvae, the in natura shrimp and the processed shrimp will be analyzed in order to verify the possibility that each one of those three steps has to pass-through the onus of the end of benefit over the ICMS. The data analysis shows that the larviculture step functions as a duopoly and, facing the end of that benefit, it will be able to pass-through most its onus to the farming step. On the other hand, this step functions similar to a perfect competing market, which diminishes its capacity to pass-through that onus to the processing step. This step operates as oligopoly with a lower concentration than the larviculture step but, due to the fact that it faces an oligopsony, it will end up assuming most of that onus, which will cause a decrease in the amount of processed shrimp. It is concluded that the end of that benefit would impact negatively, in this state, the supply chain at all, but mainly the farming and the industrial steps

Intervenções urbanas em espaços de desvalia. Transformar para valorizar.

The worldwide transformations that took place in the 20th century redefined the cities fate in this new century. The consolidation of urbanization, the technological revolution that fostered globalization, the economic restructuration and informalization, modified space and time concepts, bringing populations closer together and provoking political transformations. They made contemporaries cities protagonists of world events and as a consequence of such processes, worthlessness spaces appeared and cities all over the world started to bet on the strategy of acting in this problematic areas through initiatives aimed at promoting intentional transformations to obtain a multidimensional valorization urban, financial, environmental, cultural and social. In short, such urban initiatives intend to make cities more competitive, sustainable, creative, productive and fair. Also in Brazil, countless worthless spaces appeared in waterfronts, central areas, and deactivated industrial/urbanized areas, as well as in sub-used or misused areas lacking infrastructure and public services where it is imperative and urgent to perform urban initiatives. This research proposes as a thesis that urban initiatives, when carried out based on an adequate politicalinstitutional model, transform and give value to worthless spaces in their multiple dimensions, offering better quality of life to their residents and helping to fulfill the social role of the city. We intend to prove this thesis through the analysis of national and international cases and by introducing thoughts, critique and guidelines as a contribution to the improvement of the urban initiatives implementation processes, in particular to those regarding worthless areas of Brazilian cities