Estudo comparativo de pás para aerogeradores de grande porte fabricadas em materiais compósitos reforçadas com fibra de carbono ou fibra de vidro

The research and development of wind turbine blades are essential to keep pace with worldwide growth in the renewable energy sector. Although currently blades are typically produced using glass fiber reinforced composite materials, the tendency for larger size blades, particularly for offshore applications, has increased the interest on carbon fiber reinforced composites because of the potential for increased stiffness and weight reduction. In this study a model of blade designed for large generators (5 MW) was studied on a small scale. A numerical simulation was performed to determine the aerodynamic loading using a Computational Fluid Dynamics (CFD) software. Two blades were then designed and manufactured using epoxy matrix composites: one reinforced with glass fibers and the other with carbon fibers. For the structural calculations, maximum stress failure criterion was adopted. The blades were manufactured by Vacuum Assisted Resin Transfer Molding (VARTM), typical for this type of component. A weight comparison of the two blades was performed and the weight of the carbon fiber blade was approximately 45% of the weight of the fiberglass reinforced blade. Static bending tests were carried out on the blades for various percentages of the design load and deflections measurements were compared with the values obtained from finite element simulations. A good agreement was observed between the measured and calculated deflections. In summary, the results of this study confirm that the low density combined with high mechanical properties of carbon fibers are particularly attractive for the production of large size wind turbine blades

Função de distribuição generalizada aplicada à velocidade de rotação estelar

In the present work we use a Tsallis maximum entropy distribution law to fit the observations of projected rotational velocity measurements of stars in the Pleiades open cluster. This new distribution funtion which generalizes the Ma.xwel1-Boltzmann one is derived from the non-extensivity of the Boltzmann-Gibbs entropy. We also present a oomparison between results from the generalized distribution and the Ma.xwellia.n law, and show that the generalized distribution fits more closely the observational data. In addition, we present a oomparison between the q values of the generalized distribution determined for the V sin i distribution of the main sequence stars (Pleiades) and ones found for the observed distribution of evolved stars (subgiants). We then observe a correlation between the q values and the star evolution stage for a certain range of stel1ar mass

Caracterização estatística de processos sísmicos via Distribuição Generalizada de Pareto. Estudo de caso: João Câmara-RN

The work is to make a brief discussion of methods to estimate the parameters of the Generalized Pareto distribution (GPD). Being addressed the following techniques: Moments (moments), Maximum Likelihood (MLE), Biased Probability Weighted Moments (PWMB), Unbiased Probability Weighted Moments (PWMU), Mean Power Density Divergence (MDPD), Median (MED), Pickands (PICKANDS), Maximum Penalized Likelihood (MPLE), Maximum Goodness-of-fit (MGF) and the Maximum Entropy (POME) technique, the focus of this manuscript. By way of illustration adjustments were made for the Generalized Pareto distribution, for a sequence of earthquakes intraplacas which occurred in the city of João Câmara in the northeastern region of Brazil, which was monitored continuously for two years (1987 and 1988). It was found that the MLE and POME were the most efficient methods, giving them basically mean squared errors. Based on the threshold of 1.5 degrees was estimated the seismic risk for the city, and estimated the level of return to earthquakes of intensity 1.5°, 2.0°, 2.5°, 3.0° and the most intense earthquake never registered in the city, which occurred in November 1986 with magnitude of about 5.2º

Significados de família para crianças em abrigo

This research explores the meanings of family for institutionalized children. It identifies, more specifically, how the relationship between the child and his/ her family is. The field work was developed at a municipal shelter in Natal/RN, which houses children aged between 7 and 11 years old. The subjects of research consisted of three children: two boys and one girl. Besides age-group criterion, which facilitates the use of oral language and the procedures, we took into consideration another selection criterion: children whose family configurations were similar. In order to achieve the objectives, we used toys, pictures, collages and semi-structured interviews. Data were examined under the Thematic Content Analysis, with three thematic categories previously chosen: Configuration of geographic area, family composition and family s internal dynamics. Among the results, we highlight that, for children, the concept of family is based essentially on existence of affection ties, regardless of kinship. Through this study, we hope to contribute to the discussion on the rights of institutionalized children, concerning their need of experiencing family life and living in community

Taxonomia e biogeografia da espécie politípica Herpsilochmus rufimarginatus (TEMMINCK, 1822) (Aves: THAMNOPHILIDAE)

The genus Herpsilochmus is composed mainly of cryptic species, among them is Herpsilochmus rufimarginatus, which is currently represented by four subspecies: H. r. rufimarginatus, H. r. frater, H. r. scapularis and H. r. exiguus. Differences in plumage and vocalization suggest that there are more than one species involved in this complex. Thus this and other subspecific taxa need urgent revision, the disjunct distribution of this species also allows us to infer the relationship between birds that occur in this biome and / or different centers of endemism. This study aims to make a taxonomic revision of the taxa included in the complex time Herpsilochmus rufimarginatus based on morphological, morphometric, vocals and geographical distribution of this bird. Besides creating distribution models current potential and make the reconstruction of the distribution bygone using ecological niche modeling, and testing the niche conservatism and divergence between different subspecies. Consultations for examination of the skins of specimens of the museums: Museum of Zoology, University of São Paulo (MZUSP), National Museum of Rio de Janeiro (MN) and Emilio Goeldi Museum of Pará (MPEG), and the skins deposited at the collection of Ornithological Federal University of Rio Grande do Norte (COUFRN). We studied the following measures length of specimens: exposed culmen, culmen and total culmen nostril, tarsus, wing and tail flattened. The voice analysis was performed with vocalizations banks and / or digital banks people where 17 voice parameters were measured. This information and more available in the literature were used to assemble a bunch of data under the limit distribution of taxa and generate ecological niche models. This analyzes carried out in the program Maxent, having as model selection criterion the AUC, and the models were greater than 0.80 are considered good models. Environmental data for the realization of the modeling were downloaded on the website of Worldclim. The morphometric information, vocals and geographic distribution point for the separation of these taxa to be considering various uni and multivariate analyzes. The potential distribution models performed well (AUC> 0.80), and its distribution associated with environmental characteristics of the Amazon forest and Atlantic forest (forests of south and southeast, northeast and forest). The reconstruction of the distribution indicates a possible contact between the southern part of the Atlantic forest in the northern part of the Amazon. The analysis of niche overlap showed a low overlap between taxa and comparisons between the null model and the generated overlay link probably occurring niche conservatism. The data suggest that the taxa that occur in the Amazon and Atlantic forest represent three distinct species

Ecologia e história natural de população Hemidactylus agrius (Squamata: Gekkonidae) em área de Caatinga, com avaliação da distribuição das espécies nativas do gênero no nordeste do Brasil

The genus Hemidactylus Oken, 1817 has cosmopolite distribution, with three species occurring in Brazil, two of them native, H. brasilianus and H. agrius, and one exotic, H. mabouia. Considering the studies about ecology of lizards conducted in the Ecological Station of the Seridó, from 2001 to 2011, this study aimed (1) to re-evaluate the occurrence of the species of Hemidactylus in this ESEC; (2) to analyze ecological and biological aspects of the H. agrius population; and (3) to investigate the current and potential distribution of the native species of the genus in northeastern Brazil, analyzing the suitability of ESEC to this taxon. For the first two objectives, a sampling area consisting of five transects of 200 x 20 m, was inspected in alternating daily shifts for three consecutive days, from August 2012 to August 2013. For the latter objective, occurrence points of H. agrius and H. brasilianus from literature and from the database of Herpetological Collections of the UFRN and the UNICAMP were consulted to build predictive maps via the Maximum Entropy algorithm (MaxEnt). In ESEC Seridó, 62 H. agrius individuals were collected (25 females, 18 males and 19 juveniles), and two neonates were obtained from a communal nest incubated in the laboratory. No record was made for the other two species of the genus. Hemidactylus agrius demonstrated to be a nocturnal species specialized in habitats with rocky outcrops; but this species is generalist regarding microhabitat use. In the population studied, females had an average body length greater than males, and showed higher frequencies of caudal autotomy. Regarding diet, H. agrius is a moderately generalist species that consumes arthropods, especially insect larvae, Isoptera and Araneae; and vertebrates, with a case of cannibalism registered in the population. With respect to seasonal differences, only the number of food items ingested differed between seasons. The diet was similar between sexes, but ontogenetic differences were recorded for the total volume and maximum length of the food items. Significant relationships were found between lizard body/head size measurements and the maximum length of prey consumed. Cases of polydactyly and tail bifurcation were recorded in the population, with frequencies of 1.6% and 3.1%, respectively. In relation xv to the occurrence points of the native species, 27 were identified, 14 for H. agrius and 13 for H. brasilianus. The first species presented restricted distribution, while the second showed a wide distribution. In both models generated, the ESEC Seridó area showed medium to high suitability. The results of this study confirm the absence of H. brasilianus and H. mabouia this ESEC, and reveal H. agrius as a dietary opportunist and cannibal species. Further, the results confirm the distribution patterns shown by native species of Hemidactylus, and point ESEC Seridó as an area of probable occurrence for the species of the genus, the establishing of H. brasilianus and H. mabouia are probably limited by biotic factors, a fact yet little understood

Estudo comparativo de pás para aerogeradores de grande porte fabricadas em materiais compósitos reforçadas com fibra de carbono ou fibra de vidro

The research and development of wind turbine blades are essential to keep pace with worldwide growth in the renewable energy sector. Although currently blades are typically produced using glass fiber reinforced composite materials, the tendency for larger size blades, particularly for offshore applications, has increased the interest on carbon fiber reinforced composites because of the potential for increased stiffness and weight reduction. In this study a model of blade designed for large generators (5 MW) was studied on a small scale. A numerical simulation was performed to determine the aerodynamic loading using a Computational Fluid Dynamics (CFD) software. Two blades were then designed and manufactured using epoxy matrix composites: one reinforced with glass fibers and the other with carbon fibers. For the structural calculations, maximum stress failure criterion was adopted. The blades were manufactured by Vacuum Assisted Resin Transfer Molding (VARTM), typical for this type of component. A weight comparison of the two blades was performed and the weight of the carbon fiber blade was approximately 45% of the weight of the fiberglass reinforced blade. Static bending tests were carried out on the blades for various percentages of the design load and deflections measurements were compared with the values obtained from finite element simulations. A good agreement was observed between the measured and calculated deflections. In summary, the results of this study confirm that the low density combined with high mechanical properties of carbon fibers are particularly attractive for the production of large size wind turbine blades

O Processo de revisão do benefício de prestação continuada-BPC: uma lógica de exclusão ou inclusão social

This research comprises a study about the social assessment performed by the Social Worker in the review process of the Benefit of Continued Installment. The Benefit of Continued Installment was implemented in 1996 and guarantees a minimum salary to the deficiency person and to an elder with sixty five years or more and that proves not to have ways to support neither himself/herself nor his/her own family. It is a demand to include in the BPC that the maximum income of a family does not exceed ¼ of minimum salary and that every two years this benefit to be revised to evaluate its continuity based in its original conditions. This study was carried out in the municipality of Natal/RN, with thirteen social workers, being the collection of data performed through interviews and social assessments of the users that count with the benefit. The results show that the users selected by the criterion of the income, present a profile of poverty and deprivations demonstrated through several situations survived in its daily life, indicative of vulnerability. It was demonstrated that the Social workers has relative autonomy in the evaluations along with the users and that it denotes the necessity of inclusion. However, by following the imposed criteria, it corroborates with the logic of exclusion. So, it is identified in the Municipality of Natal/RN, following the orientation given the politics of social work at national level, the implementation of revision of the BPC, for the social workers, from rigorous processes of selection and exclusions