59 resultados para Maximização da utilidade
em Universidade Federal do Rio Grande do Norte(UFRN)
Resumo:
This work develops a methodology for defining the maximum active power being injected into predefined nodes in the studied distribution networks, considering the possibility of multiple accesses of generating units. The definition of these maximum values is obtained from an optimization study, in which further losses should not exceed those of the base case, i.e., without the presence of distributed generation. The restrictions on the loading of the branches and voltages of the system are respected. To face the problem it is proposed an algorithm, which is based on the numerical method called particle swarm optimization, applied to the study of AC conventional load flow and optimal load flow for maximizing the penetration of distributed generation. Alternatively, the Newton-Raphson method was incorporated to resolution of the load flow. The computer program is performed with the SCILAB software. The proposed algorithm is tested with the data from the IEEE network with 14 nodes and from another network, this one from the Rio Grande do Norte State, at a high voltage (69 kV), with 25 nodes. The algorithm defines allowed values of nominal active power of distributed generation, in percentage terms relative to the demand of the network, from reference values
Resumo:
The spread of wireless networks and growing proliferation of mobile devices require the development of mobility control mechanisms to support the different demands of traffic in different network conditions. A major obstacle to developing this kind of technology is the complexity involved in handling all the information about the large number of Moving Objects (MO), as well as the entire signaling overhead required to manage these procedures in the network. Despite several initiatives have been proposed by the scientific community to address this issue they have not proved to be effective since they depend on the particular request of the MO that is responsible for triggering the mobility process. Moreover, they are often only guided by wireless medium statistics, such as Received Signal Strength Indicator (RSSI) of the candidate Point of Attachment (PoA). Thus, this work seeks to develop, evaluate and validate a sophisticated communication infrastructure for Wireless Networking for Moving Objects (WiNeMO) systems by making use of the flexibility provided by the Software-Defined Networking (SDN) paradigm, where network functions are easily and efficiently deployed by integrating OpenFlow and IEEE 802.21 standards. For purposes of benchmarking, the analysis was conducted in the control and data planes aspects, which demonstrate that the proposal significantly outperforms typical IPbased SDN and QoS-enabled capabilities, by allowing the network to handle the multimedia traffic with optimal Quality of Service (QoS) transport and acceptable Quality of Experience (QoE) over time.
Resumo:
VANTI, Nadia. Links hipertextuais na comunicação científica: análise webométrica dos sítios acadêmicos latino-americanos em Ciências Sociais. Porto Alegre, 2007. 292 f. Tese (Doutorado em Comunicação e Informação) – Universidade Federal do Rio Grande do Sul. Porto Alegre, 2007.
Resumo:
From the end of the 80s, the Brazilian higher education experience strong growth, coming from the private sector, which would intensify further in the late 90th Higher education has become a lucrative business. With a drop in the number of students entering and strong competition, the number of idle places in private institutions of higher education reached 49.5% in 2004. That same year, by Measure, was the University for All Program (PROUNI) program, to include high school students from public higher education, offering scholarships to those students in private HEIs. In exchange, the IES gain tax exemption. The objective of this research is to investigate the game of interest occurred in the formulation of this program and identify the model and the political game and has led to the creation of PROUNI, analyzing the process occurred since the wording of a bill, the issue of Measure Law and that the legitimacy PROUNI, with the most important changes made initial model. Since the first draft of the Law to the final Act, the PROUNI was disfigured in its main points, as the percentage of stock for paying students, the process of selection of stock and bond of the IES program. Throughout the process of creating the program, it is quite clear the performance of the institutions representing the private higher education. As reference for the analysis was based on Rational Choice Theory of Political Science. The basic argument of the methods based on rational choice is the maximization of the benefit will be the main motivation of individuals, but they can give that your goals can be achieved more effectively through institutional action and thereby discover that their conduct is shaped by institutions. Thus, individuals rationally choose to get to a certain extent constrained to join in certain institutions, whether voluntarily or not. The PROUNI was submitted by government and public policy covered by the mystical aura of the discourse of social justice and economic development, as in higher education includes a stratum of people who would not have access to the university, due to restrictions in the supply network public higher education. However, the greatest benefit from the program are the private HEIs, which through a difficult time in a scenario marked by high competition and idleness of nearly half of the vacancies offered. The PROUNI became a program that prioritizes access and not the residence of the student to higher education. More serious than a supporting program for students Fellows is a program supporting the institutions of private education
Resumo:
This study examines the factors that influence public managers in the adoption of advanced practices related to Information Security Management. This research used, as the basis of assertions, Security Standard ISO 27001:2005 and theoretical model based on TAM (Technology Acceptance Model) from Venkatesh and Davis (2000). The method adopted was field research of national scope with participation of eighty public administrators from states of Brazil, all of them managers and planners of state governments. The approach was quantitative and research methods were descriptive statistics, factor analysis and multiple linear regression for data analysis. The survey results showed correlation between the constructs of the TAM model (ease of use, perceptions of value, attitude and intention to use) and agreement with the assertions made in accordance with ISO 27001, showing that these factors influence the managers in adoption of such practices. On the other independent variables of the model (organizational profile, demographic profile and managers behavior) no significant correlation was identified with the assertions of the same standard, witch means the need for expansion researches using such constructs. It is hoped that this study may contribute positively to the progress on discussions about Information Security Management, Adoption of Safety Standards and Technology Acceptance Model
Resumo:
In recent decades the public sector comes under pressure in order to improve its performance. The use of Information Technology (IT) has been a tool increasingly used in reaching that goal. Thus, it has become an important issue in public organizations, particularly in institutions of higher education, determine which factors influence the acceptance and use of technology, impacting on the success of its implementation and the desired organizational results. The Technology Acceptance Model - TAM was used as the basis for this study and is based on the constructs perceived usefulness and perceived ease of use. However, when it comes to integrated management systems due to the complexity of its implementation,organizational factors were added to thus seek further explanation of the acceptance of such systems. Thus, added to the model five TAM constructs related to critical success factors in implementing ERP systems, they are: support of top management, communication, training, cooperation, and technological complexity (BUENO and SALMERON, 2008). Based on the foregoing, launches the following research problem: What factors influence the acceptance and use of SIE / module academic at the Federal University of Para, from the users' perception of teachers and technicians? The purpose of this study was to identify the influence of organizational factors, and behavioral antecedents of behavioral intention to use the SIE / module academic UFPA in the perspective of teachers and technical users. This is applied research, exploratory and descriptive, quantitative with the implementation of a survey, and data collection occurred through a structured questionnaire applied to a sample of 229 teachers and 30 technical and administrative staff. Data analysis was carried out through descriptive statistics and structural equation modeling with the technique of partial least squares (PLS). Effected primarily to assess the measurement model, which were verified reliability, convergent and discriminant validity for all indicators and constructs. Then the structural model was analyzed using the bootstrap resampling technique like. In assessing statistical significance, all hypotheses were supported. The coefficient of determination (R ²) was high or average in five of the six endogenous variables, so the model explains 47.3% of the variation in behavioral intention. It is noteworthy that among the antecedents of behavioral intention (BI) analyzed in this study, perceived usefulness is the variable that has a greater effect on behavioral intention, followed by ease of use (PEU) and attitude (AT). Among the organizational aspects (critical success factors) studied technological complexity (TC) and training (ERT) were those with greatest effect on behavioral intention to use, although these effects were lower than those produced by behavioral factors (originating from TAM). It is pointed out further that the support of senior management (TMS) showed, among all variables, the least effect on the intention to use (BI) and was followed by communications (COM) and cooperation (CO), which exert a low effect on behavioral intention (BI). Therefore, as other studies on the TAM constructs were adequate for the present research. Thus, the study contributed towards proving evidence that the Technology Acceptance Model can be applied to predict the acceptance of integrated management systems, even in public. Keywords: Technology
Resumo:
This research aims to understand the factors that influence intention to online purchase of consumers, and to identify between these factors those that influence the users and the nonusers of electronic commerce. Thus, it is an applied, exploratory and descriptive research, developed in a quantitative model. Data collection was done through a questionnaire administered to a sample of 194 graduate students from the Centre for Applied Social Sciences of UFRN and data analysis was performed using descriptive statistics, confirmatory factorial analysis and simple and multiple linear regression analysis. The results of descriptive statistics revealed that respondents in general and users of electronic commerce have positive perceptions of ease of use, usefulness and social influence about buying online, and intend to make purchases on Internet over the next six months. As for the non-users of electronic commerce, they do not trust the Internet to transact business, have negative perceptions of risk and social influence over purchasing online, and does not intend to make purchases on Internet over the next six months. Through confirmatory factorial analysis six factors were set up: behavioral intention, perceived ease of use, perceived usefulness, perceived risk, trust and social influence. Through multiple regression analysis, was observed that all these factors influence online purchase intentions of respondents in general, that only the social influence does not influence the intention to continue buying on the Internet from users of electronic commerce, and that only trust and social influence affect the intention to purchase online from non-users of electronic commerce. Through simple regression analysis, was found that trust influences perceptions of ease of use, usefulness and risk of respondents in general and users of electronic commerce, and that trust does not influence the perceptions of risk of non-users of electronic commerce. Finally, it was also found that the perceived ease of use influences perceived usefulness of the three groups. Given this scenario, it was concluded that it is extremely important that organizations that work with online sales know the factors that influence consumers purchasing intentions in order to gain space in their market
Resumo:
The study aims to identify the factors that influence the behavior intention to adopt an academic Information System (SIE), in an environment of mandatory use, applied in the procurement process at the Federal University of Pará (UFPA). For this, it was used a model of innovation adoption and technology acceptance (TAM), focused in attitudes and intentions regarding the behavior intention. The research was conducted a quantitative survey, through survey in a sample of 96 administrative staff of the researched institution. For data analysis, it was used structural equation modeling (SEM), using the partial least squares method (Partial Least Square PLS-PM). As to results, the constructs attitude and subjective norms were confirmed as strong predictors of behavioral intention in a pre-adoption stage. Despite the use of SIE is required, the perceived voluntariness also predicts the behavior intention. Regarding attitude, classical variables of TAM, like as ease of use and perceived usefulness, appear as the main influence of attitude towards the system. It is hoped that the results of this study may provide subsidies for more efficient management of the process of implementing systems and information technologies, particularly in public universities
Resumo:
The petrochemical industry has as objective obtain, from crude oil, some products with a higher commercial value and a bigger industrial utility for energy purposes. These industrial processes are complex, commonly operating with large production volume and in restricted operation conditions. The operation control in optimized and stable conditions is important to keep obtained products quality and the industrial plant safety. Currently, industrial network has been attained evidence when there is a need to make the process control in a distributed way. The Foundation Fieldbus protocol for industrial network, for its interoperability feature and its user interface organized in simple configuration blocks, has great notoriety among industrial automation network group. This present work puts together some benefits brought by industrial network technology to petrochemical industrial processes inherent complexity. For this, a dynamic reconfiguration system for intelligent strategies (artificial neural networks, for example) based on the protocol user application layer is proposed which might allow different applications use in a particular process, without operators intervention and with necessary guarantees for the proper plant functioning
Resumo:
In the last decades, the oil, gas and petrochemical industries have registered a series of huge accidents. Influenced by this context, companies have felt the necessity of engaging themselves in processes to protect the external environment, which can be understood as an ecological concern. In the particular case of the nuclear industry, sustainable education and training, which depend too much on the quality and applicability of the knowledge base, have been considered key points on the safely application of this energy source. As a consequence, this research was motivated by the use of the ontology concept as a tool to improve the knowledge management in a refinery, through the representation of a fuel gas sweetening plant, mixing many pieces of information associated with its normal operation mode. In terms of methodology, this research can be classified as an applied and descriptive research, where many pieces of information were analysed, classified and interpreted to create the ontology of a real plant. The DEA plant modeling was performed according to its process flow diagram, piping and instrumentation diagrams, descriptive documents of its normal operation mode, and the list of all the alarms associated to the instruments, which were complemented by a non-structured interview with a specialist in that plant operation. The ontology was verified by comparing its descriptive diagrams with the original plant documents and discussing with other members of the researchers group. All the concepts applied in this research can be expanded to represent other plants in the same refinery or even in other kind of industry. An ontology can be considered a knowledge base that, because of its formal representation nature, can be applied as one of the elements to develop tools to navigate through the plant, simulate its behavior, diagnose faults, among other possibilities
Resumo:
Originally aimed at operational objectives, the continuous measurement of well bottomhole pressure and temperature, recorded by permanent downhole gauges (PDG), finds vast applicability in reservoir management. It contributes for the monitoring of well performance and makes it possible to estimate reservoir parameters on the long term. However, notwithstanding its unquestionable value, data from PDG is characterized by a large noise content. Moreover, the presence of outliers within valid signal measurements seems to be a major problem as well. In this work, the initial treatment of PDG signals is addressed, based on curve smoothing, self-organizing maps and the discrete wavelet transform. Additionally, a system based on the coupling of fuzzy clustering with feed-forward neural networks is proposed for transient detection. The obtained results were considered quite satisfactory for offshore wells and matched real requisites for utilization
Resumo:
Nearly 3 x 1011 m3 of medium and light oils will remain in reservoirs worldwide after conventional recovery methods have been exhausted and much of this volume would be recovered by Enhanced Oil Recovery (EOR) methods. The in-situ combustion (ISC) is an EOR method in which an oxygen-containing gas is injected into a reservoir where it reacts with the crude oil to create a high-temperature combustion front that is propagated through the reservoir. The High Pressure Air Injection (HPAI) method is a particular denomination of the air injection process applied in light oil reservoirs, for which the combustion reactions are dominant between 150 and 300°C and the generation of flue gas is the main factor to the oil displacement. A simulation model of a homogeneous reservoir was built to study, which was initially undergone to primary production, for 3 years, next by a waterflooding process for 21 more years. At this point, with the mature condition established into the reservoir, three variations of this model were selected, according to the recovery factors (RF) reached, for study the in-situ combustion (HPAI) technique. Next to this, a sensitivity analysis on the RF of characteristic operational parameters of the method was carried out: air injection rate per well, oxygen concentration into the injected gas, patterns of air injection and wells perforations configuration. This analysis, for 10 more years of production time, was performed with assistance of the central composite design. The reservoir behavior and the impacts of chemical reactions parameters and of reservoir particularities on the RF were also evaluated. An economic analysis and a study to maximize the RF of the process were also carried out. The simulation runs were performed in the simulator of thermal processes in reservoirs STARS (Steam, Thermal, and Advanced Processes Reservoir Simulator) from CMG (Computer Modelling Group). The results showed the incremental RF were small and the net present value (NPV) is affected by high initial investments to compress the air. It was noticed that the adoption of high oxygen concentration into the injected gas and of the five spot pattern tends to improve the RF, and the wells perforations configuration has more influence with the increase of the oil thickness. Simulated cases relating to the reservoir particularities showed that smaller residual oil saturations to gas lead to greater RF and the presence of heterogeneities results in important variations on the RF and on the production curves
Resumo:
Although it has been suggested that retinal vasculature is a diffusion-limited aggregation (DLA) fractal, no study has been dedicated to standardizing its fractal analysis . The aims of this project was to standardize a method to estimate the fractal dimensions of retinal vasculature and to characterize their normal values; to determine if this estimation is dependent on skeletization and on segmentation and calculation methods; to assess the suitability of the DLA model and to determine the usefulness of log-log graphs in characterizing vasculature fractality . To achieve these aims, the information, mass-radius and box counting dimensions of 20 eyes vasculatures were compared when the vessels were manually or computationally segmented; the fractal dimensions of the vasculatures of 60 eyes of healthy volunteers were compared with those of 40 DLA models and the log-log graphs obtained were compared with those of known fractals and those of non-fractals. The main results were: the fractal dimensions of vascular trees were dependent on segmentation methods and dimension calculation methods, but there was no difference between manual segmentation and scale-space, multithreshold and wavelet computational methods; the means of the information and box dimensions for arteriolar trees were 1.29. against 1.34 and 1.35 for the venular trees; the dimension for the DLA models were higher than that for vessels; the log-log graphs were straight, but with varying local slopes, both for vascular trees and for fractals and non-fractals. This results leads to the following conclusions: the estimation of the fractal dimensions for retinal vasculature is dependent on its skeletization and on the segmentation and calculation methods; log-log graphs are not suitable as a fractality test; the means of the information and box counting dimensions for the normal eyes were 1.47 and 1.43, respectively, and the DLA model with optic disc seeding is not sufficient for retinal vascularization modeling
Resumo:
The performance of the State in the economic area is only legitimized when to be given in virtue of the protection of the principles established constitutionally. Thus, the economic intervention of the State prioritizes the formation of a joust economic order and in this context, it fulfills to us to define, to the long one of this work, the contours of the intervention of the State in the economic domain in the presence of the Federal Constitution of the Republic of 05 of October of 1988, and, more specifically, in the petroliferous economic sector by means of the interventive contribution instituted after the Constitutional amendment 33/2001, with Law 10.336/2001. With the creation of this institute, in Brazil, emerged innumerable quarrels concerning its constitutional legitimacy, directing uncurling of the research to the study of the state intervention through this contribution and its constitutional limits, in the purpose to demonstrate the parameters for its institution and application. In this way, the interventive contribution in the fuel sector (CIDE-Combustíveis) shows itself as an intervention instrument on the economic domain, acting in way to finance the indirect performance of the State, specially in what concerns to the promotion of the principle of sustainable development principle. Therefore, CIDE-Combustíveis is an able instrument to concretizes the mentioned constitutional principle. Thus, the division of its incomes promotes the consolidation of the principle of the cooperative federalism. In this direction, from premises of the environmental tax law, this intends to demonstrate the utility and constitutionality of this exaction tax, primordially with regard to the realization of the basic right to the balanced environment
Resumo:
When scientists study methods, theory and standards in an inseparable form, he is facing a paradigm. Throughout the development of a determined science, paradigms can change by changing the methods, objective and standards of research. Fisheries science is changing the paradigm moving from the paradigm of maximization in the use of resources, quantified by the index of the catch, which was influenced by evolutionary concepts such as Optimal Foraging Theory, to the sustainability paradigm that seeks its foundation in the fishery ecosystem perspective. The goal of this study was to review methods, theory and the history of ecosystem indexes of fishery science that attempts to determine sustainability of fishery resources from the data capture. Ecosystems indexes by themselves may not be useful to measure the sustainability of fishing because they focus only on the environmental or ecological side of the sustainability tripod. Probably to measure the sustainability of fishing these indexes should include in the future the Payments for Ecosystem Services and Social Resilience. Thus the methods and theories are in constantly changing within science to meet the most current paradigm