Avaliação da atenção humanizada ao abortamento em maternidade-escola, em Natal, Rio Grande do Norte

Unplanned pregnancy is experienced by millions of women worldwide. Such fact increases the risk of abortion-related morbimortality, which represents a serious public health problem. This study aims to evaluate the advances and challenges of the implementation of Humanized Abortion Care at the Maternity-School in Natal, state of Rio Grande do Norte. The research was evaluative, was preceded by an Evaluative Study, and resulted in a Case Study. The intentional sample totaled 102 subjects (60 users, 39 professionals and 3 managers). The collection techniques included documental analysis, semi-structured interview and observation with a field diary. The documental analysis was descriptive, while the Content Analysis by Bardin was used for semi-structured interviews and field diary. The Evaluative Study observed that Humanized Abortion Care is an evaluative program with preparation and pact of the logical model, of the matrix of indicators and evaluative questions. The Case Study showed that users were satisfied with the problem-solving capacity and access to the service; however, is also showed that they pointed out inadequacy in terms of environment, qualified hearing and reproductive planning. Professionals reported that the inefficiency of service consists of infrastructure and environment, which are considered inefficient and inadequate to humanized care, especially regarding patient accommodation, the lack of hospital beds, the reduced number of rooms in the surgical center and the lack of laboratory inside the maternity. Moreover, reproductive planning does not consist of an institutionalized practice in the service, and integrality with other services or partnership with the community is not in place. The Maternity Board emphasizes that the excessive demand of patients is one of the reasons that hinders the appropriate implementation of the technical standard. We then conclude that although satisfied regarding problem-solving capacity in terms of service and ease of access, there is room for improvement in qualified hearing systems, in the creation of a system to promote team work, implementation of ombudsman and satisfaction surveys. The right of shared choice did not prevail among users and health professionals with regard to the option of uterine evacuation procedure. Environment was the most mentioned category as that requiring more changes, seeing as a limited factor for the development of humanized and welcoming practices. Health professionals do not establish a periodic routine of planning practices, and such practices are not aligned with the Technical Standard. Incorporation of guidelines and availability of a plurality of methods and possibilities of choices for family planning are required. There is no institutionalization of reference and counter-reference, or partnerships with the community, which makes integrality of care not viable. The Standard needs to be included in the action plans of managers as one of the priorities in the construction of care strategies for women's health, in order to enable, allied to other initiatives, the real integration among safe conduct service, primary care network and social organizations. As a result, respect for human rights and adequate humanized care, as a way of attention and prevention of abortion, can be secured.

Fatores determinantes da decisão sobre a prática da cesariana em Natal-RN

O objetivo deste estudo é analisar os fatores que contribuíram para as diferentes decisões para o parto cesáreo e a ligadura de trompas entre as mulheres de 18 a 45 anos de idade no Município de Natal, no Nordeste do Brasil, no ano de 2000. Tratou-se de um estudo longitudinal, originado da base de dados de um Estudo Multicêntrico, envolvendo outras localidades do Brasil, composta de mulheres em idade fértil que procuraram o serviço público ou privado. Foram realizadas três entrevistas: no início da gestação, no mês anterior à data provável do parto e até um mês após o parto, perfazendo um total de 433 entrevistas, sendo finalizada com uma amostra de 269 mulheres. O estudo satisfez a um critério de elegibilidade, abrangendo uma amostra das mulheres de 18 a 40 anos de idade, que residiam em Natal e que estavam grávidas no máximo, na 22a semana de gestação, e procuraram o serviço público ou privado para a realização do pré-natal. Não entraram no estudo, aquelas mulheres que faziam um acompanhamento em ambulatórios especiais (hipertensão ou diabetes gestacional, HIV/AIDS). A análise consistiu, primeiramente, num estudo descritivo, seguido de uma discussão sobre a trajetória do desejo à realização do parto e testou-se a significância estatística dos partos com variáveis socioeconômicas. Sequencialmente adotou-se uma análise bivariada centrada nos testes de associação, onde foi considerada a variável tipo de parto como sendo a variável resposta e as demais variáveis, relacionadas à condição sóciodemográfica e a saúde reprodutiva da mulher, como sendo as variáveis de risco ou independentes. Para o cálculo da razão de chance (OR), foi utilizado o modelo de regressão logística múltipla. Das 269 mulheres entrevistadas, 56,0% foram submetidas ao parto normal. Este tipo de parto foi desejado independente da categoria, por 71% das entrevistadas. Os resultados mostraram como fatores determinantes para cesárea, o serviço ser privado (OR = 5,6), a mulher ter idade acima de 20 anos (OR=2,87), ser primípara (OR=4,56) e a realização de ligadura de trompas (OR=12,94). Independente da parturição, 84% das mulheres do serviço público foram submetidas a um parto normal, enquanto que, 74% das primíparas do serviço privado, fizeram uma cesárea. Os resultados sinalizam um distanciamento efetivo entre o desejo por um tipo de parto e a sua realização, quando os fatores considerados, não foram somente técnicos, podendo, também, refletir a falta de prática do parto normal, pelo obstetra e a necessidade de uma maior consciência ética nos procedimentos obstétricos, de modo a favorecer uma maior abertura na participação da gestante na escolha pelo tipo de parto

Trajetória de mulheres e a participação masculina no processo de aborto provocado

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Desempenho e background familiar: um estudo no acesso a uma instituição de ensino técnico federal no Brasil

This paper comprises an investigation on the influence of the variable family backgrounds (father school level, mother school level and family income) over the pupil s performance in admissions examination (entrance test or PROITEC) at Instituto Federal de Educação, Ciência e Tecnologia do Rio Grande do Norte (IFRN). From that point of view, the main goal of this research is to analyze the influence of the family background as a determiner of the pupil´s performance in the access to Technical and Professional education at IFRN. Secondary data were used from two databases (entrance test and PROITEC) adding up to 19.226 observations to the vacancies offered in the year of 2013. Aiming at achieving the proposed goal, a conceptual model composed of three hypothesis was developed. The results were presented in four stages: stage I presentation of the descriptive statistical results of the two databases; stage II separation of the campi in clusters; stage III analysis of multiple regressions; stage IV analysis of the logistics regressions. Two statistical tests were used to validate the hypothesis: T-test and Wald test. Hypothesis 1 and 2 were confirmed and H3 was refused. The results presented favorable causal connections to the family income and the father school level variables (with bigger effect for fathers with a higher education degree). The mother school level variable did not provide statistical significance for this research. Based on this result, after this work, this institution is to develop a strategic plan to assist in the success rate of students preparing diagnoses in order to diminish the effects of the variables that impacted negatively

Síntese de pigmento cerâmico ferrita de cobalto utilizando planejamento experimental

Synthetic inorganic pigments are the most widely used in ceramic applications because they have excellent chemical and thermal stability and also, in general, a lower toxicity to man and to the environment. In the present work, the ceramic black pigment CoFe2O4 was synthesized by the polymerization Complex method (MPC) in order to form a material with good chemical homogeneity. Aiming to optimize the process of getting the pigment through the MPC was used a fractional factorial design 2(5-2), with resolution III. The factors studied in mathematical models were: citric acid concentration, the pyrolysis time, temperature, time and rate of calcination. The response surfaces using the software statistica 7.0. The powders were characterized by thermal analysis (TG/DSC), x-ray diffraction (XRD), scanning electron microscopy (SEM) and spectroscopy in the UV-visible. Based on the results, there was the formation of phase cobalt ferrite (CoFe2O4) with spinel structure. The color of the pigments obtained showed dark shades, from black to gray. The model chosen was appropriate since proved to be adjusted and predictive. Planning also showed that all factors were significant, with a confidence level of 95%

Agregação familiar e resultados maternos e perinatais da pré-eclâmpsia severa em população do Rio Grande do Norte

To determine whether there is familiar aggregation of severe preeclampsia in a Brazilian population from Rio Grande do Norte and to characterize the maternal and perinatal outcomes in the studied population. Methods: A case control study was performed with 412 participants who were admitted at Maternidade Escola Januário Cicco (MEJC) for medical care. Of these, 264 subjects presented normal blood pressure and 148 were cases. Cases were composed of eclampsia (n=47), HELLP Syndrome (n=85) and Eclampsia associated with HELLP syndrome (n=16). The diagnosis of these illness were based on the citeria developed by National High Blood Pressure Education Program Working (2000). An interview was performed with each subject and questions related to personal and familiar history of hypertension, preeclampsia, HELLP syndrome and eclampsia. Statistical analysis was performed and comparison of median and mean between cases and controls were performed, with the level of significance of 5%. The Odds-Ratio was determined to estimate the risk of preeclampsia within the families. Results: There were no difference in the demographic data between cases and controls. Previous history of chronic hypertension and preeclampsia was more frequent in the case group. Headaches were more frequent in eclampsia and epigastric pain in the HELLP syndrome cases. Bleeding and oliguria were more frequently found in the eclampsia associated with HELLP syndrome cases. Acute Renal insufficiency was a common complication in the case group, but these cases did not evolve to chronic renal insufficiency. The maternal mortality was 0.4% and the perinatal mortality was high, 223 per 1,000 live births. The 111 risk of a woman to develop preeclampsia whose mother has hypertension or had preeclampsia was respectively 2.5 and 3.5. This risk was increased 5 times, when a sibling has hypertension and 6 times when both sibling and mother had previous history of preeclampsia. Conclusions: This study confirms that there is familiar aggregation of preeclampsia in this Brazilian population. The potential for cardiovascular complications due to development of chronic hypertension indicates the need of closely follow up of women who develop preeclampsia

Relação entre ambiente familiar e capacidade funcional de idosos residentes no município de Jequié-BA

(Objective) Assess the functional capacity and determine the difference between the means of functional capacity (basic and instrumental activities of daily living) and the age groups of elderly residents in an outlying area in the hinterland of Bahia/Northeast of Brazil. (Methods) Analytical study with cross-sectional design and a sample of 150 elderly individuals enrolled in four Health Units in the municipality of Jequié, Bahia, Brazil. The instrument consisted of sociodemographic and health data, the Barthel Index and the Lawton scale. (Results) In all, 78.00% of the elderly were classified as dependent in the basic activities and 65.33% in the instrumental activities of daily living. Using the Kruskal- Wallis test, we found a statistically significant difference between the means of instrumental activities and the age groups (p= 0.011). (Conclusion) An elevated number of elderly were classified as dependent in terms of functional capacity and increased age is related to greater impairment in the execution of instrumental activities of daily living

Desenvolvimento, sustentabilidade e conservação da biodiversidade na amazônia: a produção familiar agroextrativista em áreas protegidas no sul do amapá

The establishment of Extractivism and Sustainable Development Reserves comes from an amazon forestry people resistance initiative. It means an option of natural resources management as protected areas for agroextractivism purposes. According to the institutional point of view, these lands, called Conservation Unity for Sustainable Exploration, belong to the government which grants the usufruct rights to the agroextractivist families under a sharing territory administration agreement among government and rural communities. The main roles of these lands are both: to improve the dwellers wellbeing, and protecting the local biodiversity. Additionally, they also represent the start of this thesis theme entitled Development, sustainability, and biodiversity conservation in the Amazon region: the use of protected areas for agroextractivism domestic yield in south of Amapá state with the objective of analyzing the performance that each territory has been reaching in terms of the attributions proposed at the beginning, when they were created. Social, economics, and environment changes that occurred in the agroextractivist areas have been evaluated from two selected test sites, named Rio Cajari Extractivist Reserve and Rio Iratapuru Sustainable Reserve, both, localized in the south of Amapá state

Conhecimento dos adolescentes sobre métodos contraceptivos: pesquisa-ação em uma unidade do programa saúde da família de Natal

It is a descriptive study with a qualitative approach, and an action-research type, which aimed to analyze the changes of knowledge about contraceptive methods invested to a teenager group attended in Igapó Family Healthcare Unit, in the city of Natal/RN, after consent and institutional assent of Ethics Committee of Rio Grande do Norte Federal University (Protocol No. 131/07). It were researched 16 teenagers of both sexes, with age ranging from 11 to 16 years. We used two structured questionnaires, one in the initial diagnosis and another during the seven meetings of the focus group, in addition to the field notes and the meetings discussions transcriptions. The data-collection was performed in the period of two months by a team composed by a nurse the research coordinator, a dentist, a nursing assistant, a community-based healthcare worker and a nursing academic. The quantitative and qualitative data were organized, tagged and categorized into spreadsheet in Microsoft Excel, being held a thematic analysis of speeches performed by the study participants. The results were presented as tables, graphics, photos, drawings and word clippings. The educational strategy developed in focus group allowed adolescents to discuss, exchange ideas and opinions on several contraceptive methods, providing expansion in knowledge of all contraceptives discussed, especially those natural and surgical, which were less mentioned at the beginning of the study. Among the advantages of the contraceptive methods listed by teenagers, was highlighted avoiding pregnancy and STDs in use of the barrier method of condom. As for the disadvantages more frequently noted by the survey with the misuse of barrier methods, was highlighted get pregnant, acquire STD's and do not prevent STD's in hormonal, natural and surgical methods. Adolescents showed consistency between the advantages and disadvantages and types of contraceptive methods, showing a widening in knowledge among them. It may be said that, in general, those surveyed had a good understanding about the use of the various contraceptive methods. Thus, the study participants had positively evaluated all the criteria used to qualify the meetings in the focus group. The action strategy of the focus group should be encouraged by professionals who work with teenagers, since they prefer to live in groups, one characteristic of adolescence.

Uso de técnicas de otimização baseadas em derivadas como suporte do planejamento operacional de redes de distribuição de energia elétrica

The usual programs for load flow calculation were in general developped aiming the simulation of electric energy transmission, subtransmission and distribution systems. However, the mathematical methods and algorithms used by the formulations were based, in majority, just on the characteristics of the transmittion systems, which were the main concern focus of engineers and researchers. Though, the physical characteristics of these systems are quite different from the distribution ones. In the transmission systems, the voltage levels are high and the lines are generally very long. These aspects contribute the capacitive and inductive effects that appear in the system to have a considerable influence in the values of the interest quantities, reason why they should be taken into consideration. Still in the transmission systems, the loads have a macro nature, as for example, cities, neiborhoods, or big industries. These loads are, generally, practically balanced, what reduces the necessity of utilization of three-phase methodology for the load flow calculation. Distribution systems, on the other hand, present different characteristics: the voltage levels are small in comparison to the transmission ones. This almost annul the capacitive effects of the lines. The loads are, in this case, transformers, in whose secondaries are connected small consumers, in a sort of times, mono-phase ones, so that the probability of finding an unbalanced circuit is high. This way, the utilization of three-phase methodologies assumes an important dimension. Besides, equipments like voltage regulators, that use simultaneously the concepts of phase and line voltage in their functioning, need a three-phase methodology, in order to allow the simulation of their real behavior. For the exposed reasons, initially was developped, in the scope of this work, a method for three-phase load flow calculation in order to simulate the steady-state behaviour of distribution systems. Aiming to achieve this goal, the Power Summation Algorithm was used, as a base for developing the three phase method. This algorithm was already widely tested and approved by researchers and engineers in the simulation of radial electric energy distribution systems, mainly for single-phase representation. By our formulation, lines are modeled in three-phase circuits, considering the magnetic coupling between the phases; but the earth effect is considered through the Carson reduction. It s important to point out that, in spite of the loads being normally connected to the transformer s secondaries, was considered the hypothesis of existence of star or delta loads connected to the primary circuit. To perform the simulation of voltage regulators, a new model was utilized, allowing the simulation of various types of configurations, according to their real functioning. Finally, was considered the possibility of representation of switches with current measuring in various points of the feeder. The loads are adjusted during the iteractive process, in order to match the current in each switch, converging to the measured value specified by the input data. In a second stage of the work, sensibility parameters were derived taking as base the described load flow, with the objective of suporting further optimization processes. This parameters are found by calculating of the partial derivatives of a variable in respect to another, in general, voltages, losses and reactive powers. After describing the calculation of the sensibility parameters, the Gradient Method was presented, using these parameters to optimize an objective function, that will be defined for each type of study. The first one refers to the reduction of technical losses in a medium voltage feeder, through the installation of capacitor banks; the second one refers to the problem of correction of voltage profile, through the instalation of capacitor banks or voltage regulators. In case of the losses reduction will be considered, as objective function, the sum of the losses in all the parts of the system. To the correction of the voltage profile, the objective function will be the sum of the square voltage deviations in each node, in respect to the rated voltage. In the end of the work, results of application of the described methods in some feeders are presented, aiming to give insight about their performance and acuity

Uso de técnicas de otimização baseadas em derivadas como suporte do planejamento operacional de redes de distribuição de energia elétrica

The usual programs for load flow calculation were in general developped aiming the simulation of electric energy transmission, subtransmission and distribution systems. However, the mathematical methods and algorithms used by the formulations were based, in majority, just on the characteristics of the transmittion systems, which were the main concern focus of engineers and researchers. Though, the physical characteristics of these systems are quite different from the distribution ones. In the transmission systems, the voltage levels are high and the lines are generally very long. These aspects contribute the capacitive and inductive effects that appear in the system to have a considerable influence in the values of the interest quantities, reason why they should be taken into consideration. Still in the transmission systems, the loads have a macro nature, as for example, cities, neiborhoods, or big industries. These loads are, generally, practically balanced, what reduces the necessity of utilization of three-phase methodology for the load flow calculation. Distribution systems, on the other hand, present different characteristics: the voltage levels are small in comparison to the transmission ones. This almost annul the capacitive effects of the lines. The loads are, in this case, transformers, in whose secondaries are connected small consumers, in a sort of times, mono-phase ones, so that the probability of finding an unbalanced circuit is high. This way, the utilization of three-phase methodologies assumes an important dimension. Besides, equipments like voltage regulators, that use simultaneously the concepts of phase and line voltage in their functioning, need a three-phase methodology, in order to allow the simulation of their real behavior. For the exposed reasons, initially was developped, in the scope of this work, a method for three-phase load flow calculation in order to simulate the steady-state behaviour of distribution systems. Aiming to achieve this goal, the Power Summation Algorithm was used, as a base for developping the three phase method. This algorithm was already widely tested and approved by researchers and engineers in the simulation of radial electric energy distribution systems, mainly for single-phase representation. By our formulation, lines are modeled in three-phase circuits, considering the magnetic coupling between the phases; but the earth effect is considered through the Carson reduction. Its important to point out that, in spite of the loads being normally connected to the transformers secondaries, was considered the hypothesis of existence of star or delta loads connected to the primary circuit. To perform the simulation of voltage regulators, a new model was utilized, allowing the simulation of various types of configurations, according to their real functioning. Finally, was considered the possibility of representation of switches with current measuring in various points of the feeder. The loads are adjusted during the iteractive process, in order to match the current in each switch, converging to the measured value specified by the input data. In a second stage of the work, sensibility parameters were derived taking as base the described load flow, with the objective of suporting further optimization processes. This parameters are found by calculating of the partial derivatives of a variable in respect to another, in general, voltages, losses and reactive powers. After describing the calculation of the sensibility parameters, the Gradient Method was presented, using these parameters to optimize an objective function, that will be defined for each type of study. The first one refers to the reduction of technical losses in a medium voltage feeder, through the installation of capacitor banks; the second one refers to the problem of correction of voltage profile, through the instalation of capacitor banks or voltage regulators. In case of the losses reduction will be considered, as objective function, the sum of the losses in all the parts of the system. To the correction of the voltage profile, the objective function will be the sum of the square voltage deviations in each node, in respect to the rated voltage. In the end of the work, results of application of the described methods in some feeders are presented, aiming to give insight about their performance and acuity

Determinação de Chaveamento para Recomposição do Serviço em Redes de Distribuição de Energia Elétrica em Média Tensão Através de Métodos Baseado em Parâmetros de Sensibilidade

The reconfiguration of a distribution network is a change in its topology, aiming to provide specific operation conditions of the network, by changing the status of its switches. It can be performed regardless of any system anomaly. The service restoration is a particular case of reconfiguration and should be performed whenever there is a network failure or whenever one or more sections of a feeder have been taken out of service for maintenance. In such cases, loads that are supplied through lines sections that are downstream of portions removed for maintenance may be supplied by the closing of switches to the others feeders. By classical methods of reconfiguration, several switches may be required beyond those used to perform the restoration service. This includes switching feeders in the same substation or for substations that do not have any direct connection to the faulted feeder. These operations can cause discomfort, losses and dissatisfaction among consumers, as well as a negative reputation for the energy company. The purpose of this thesis is to develop a heuristic for reconfiguration of a distribution network, upon the occurrence of a failure in this network, making the switching only for feeders directly involved in this specific failed segment, considering that the switching applied is related exclusively to the isolation of failed sections and bars, as well as to supply electricity to the islands generated by the condition, with significant reduction in the number of applications of load flows, due to the use of sensitivity parameters for determining voltages and currents estimated on bars and lines of the feeders directly involved with that failed segment. A comparison between this process and classical methods is performed for different test networks from the literature about networks reconfiguration

Localização de um robô móvel usando odometria e marcos naturais

Several methods of mobile robot navigation request the mensuration of robot position and orientation in its workspace. In the wheeled mobile robot case, techniques based on odometry allow to determine the robot localization by the integration of incremental displacements of its wheels. However, this technique is subject to errors that accumulate with the distance traveled by the robot, making unfeasible its exclusive use. Other methods are based on the detection of natural or artificial landmarks present in the environment and whose location is known. This technique doesnt generate cumulative errors, but it can request a larger processing time than the methods based on odometry. Thus, many methods make use of both techniques, in such a way that the odometry errors are periodically corrected through mensurations obtained from landmarks. Accordding to this approach, this work proposes a hybrid localization system for wheeled mobile robots in indoor environments based on odometry and natural landmarks. The landmarks are straight lines de.ned by the junctions in environments floor, forming a bi-dimensional grid. The landmark detection from digital images is perfomed through the Hough transform. Heuristics are associated with that transform to allow its application in real time. To reduce the search time of landmarks, we propose to map odometry errors in an area of the captured image that possesses high probability of containing the sought mark

Desenvolvimento de métodos construtivos e de novos materiais empregados na confecção de cartuchos de próteses de membros inferiores

The manufacture of prostheses for lower limb amputees (transfemural and transtibial) requires the preparation of a cartridge with appropriate and custom fit to the profile of each patient. The traditional process to the patients, mainly in public hospitals in Brazil, begins with the completion of a form where types of equipment, plugins, measures, levels of amputation etc. are identified. Currently, such work is carried out manually using a common metric tape and caliper of wood to take the measures of the stump, featuring a very rudimentary, and with a high degree of uncertainty geometry of the final product. To address this problem, it was necessary to act in two simultaneously and correlated directions. Originally, it was developed an integrated tool for viewing 3D CAD for transfemoral types of prostheses and transtibial called OrtoCAD I. At the same time, it was necessary to design and build a reader Mechanical equipment (sort of three-dimensional scanner simplified) able to obtain, automatically and with accuracy, the geometric information of either of the stump or the healthy leg. The methodology includes the application of concepts of reverse engineering to computationally generate the representation of the stump and/or the reverse image of the healthy member. The materials used in the manufacturing of prostheses nor always obey to a technical scientific criteria, because, if by one way it meets the criteria of resistance, by the other, it brings serious problems mainly due to excess of weight. This causes to the user various disorders due to lack of conformity. That problem was addressed with the creation of a hybrid composite material for the manufacture of cartridges of prostheses. Using the Reader Fitter and OrtoCAD, the new composite material, which aggregates the mechanical properties of strength and rigidity on important parameters such as low weight and low cost, it can be defined in its better way. Besides, it brings a reduction of up steps in the current processes of manufacturing or even the feasibility of using new processes, in the industries, in order to obtain the prostheses. In this sense, the hybridization of the composite with the combination of natural and synthetic fibers can be a viable solution to the challenges offered above

Otimização do processo de flotação de emulsão óleo/água através do planejamento fatorial completo

In recent decades, the generation of solid and liquid waste has increased substantially due to increased industrial activity that is directly linked to economic growth. For that is the most efficient process, it is inevitable generation of such wastes. In the oil industry, a major waste generated in oil exploration is produced water, which due to its complex composition and the large amount generated, has become a challenge, given the restrictions imposed by environmental laws regarding their disposal, making if necessary create alternatives for reuse or treatment in order to reduce the content of contaminants and reduce the harmful effects to the environment. This water can be present in free form or emulsified with the oil, when in the form of an emulsion of oil-water type, it is necessary to use chemicals to promote the separation and flotation is the treatment method which has proved to be more efficient, for it can remove much of the emulsified oil when compared to other methods. In this context, the object of this work was to study the individual effects and interactions of some physicochemical parameters of operations, based on previous work to a flotation cell used in the separation of synthetic emulsion oil / water in order to optimize the efficiency of the separation process through of the 24 full factorial design with center point. The response variables to evaluate the separation efficiency was the percentage of color and turbidity removal. The independent variables were: concentration of de-emulsifying, oil content in water, salinity and pH, these being fixed, minimum and maximum limits. The analysis of variance for the equation of the empirical model, was statistically significant and useful for predictive purposes the separation efficiency of the floater with R2 > 90%. The results showed that the oil content in water and the interaction between the oil content in water and salinity, showed the highest values of the estimated effects among all the factors investigated, having great and positive influence on the separation efficiency. By analyzing the response surface was determined maximum removal efficiency above 90% for both measured for turbidity as a measure of color when in a saline medium (30 g/L), the high oil concentrations (306 ppm) using low concentrations of de-emulsifying (1,1 ppm) and at pH close to neutral