Associação entre consumo alimentar e atividade física com a síndrome metabólica em mulheres na pós-menopausa

Post-menopause is characterized as the period beginning one year after the permanent cessation of menstrual cycles, which is typically related to medical disorders that, in association with Metabolic Syndrome (MS), represent a set of cardiovascular risk factors. Objective: To assess dietary intake and the prevalence of metabolic syndrome in postmenopausal women, according to the level of physical activity. Methods: The sample consisted of 82 women, evaluated in the Northern Zone of the city of Natal / RN who were participants in the Natal Active Program. People completed a Food Frequency Consumption Questionnaire (FFCQ) and were interviewed about physical activity. Anthropometric measurements and biochemical tests were used to diagnose MS (Metabolic Syndrome). Result: The active women consumed more protective foods (flaxseed, nuts, whole wheat bread, brown rice and olive oil) than inactive women. Risky foods (sugar, crackers, white bread, white rice, margarine and beef) were consumed more by the group of inactive women. The prevalence of MS was higher in inactive women (53.30%) than in physically active women (46.70%). Conclusion: Active post-menopausal women had a higher daily intake of protective foods in relation to cardiovascular disease, while the inactive post-menopausal women had higher intake of risky foods for such diseases

Proposição de um modelo para análise de fluxo de carga, curto-circuito e simulação de relés de produção

The objective of the present work is develop a model to simulate electrical energy networks in transient and stead states, using the software ATP (Alternative Transient Program), able to be a way to join two distinct themes, present in classical methodology planning networks: short circuit analysis and load flow theory. Beyond that, using a tool for relay simulation, this paper intend to use the new developed model to investigate the influence of transient phenomenon in operation of protection relays, and calibrate the enterprise's protections relays. For testing the model, some relays, actually, installed at COSERN were used

Dinâmica de tempos curtos aplicado ao modelo de ising diluído por sítio em duas dimensões

Existem vários métodos de simulação para calcular as propriedades críticas de sistemas; neste trabalho utilizamos a dinâmica de tempos curtos, com o intuito de testar a eficiência desta técnica aplicando-a ao modelo de Ising com diluição de sítios. A Dinâmica de tempos curtos em combinação com o método de Monte Carlos verificou que mesmo longe do equilíbrio termodinâmico o sistema já se mostra insensível aos detalhes microscópicos das interações locais e portanto, o seu comportamento universal pode ser estudado ainda no regime de não-equilíbrio, evitando-se o problema do alentecimento crítico ( critical slowing down ) a que sistema em equilíbrio fica submetido quando está na temperatura crítica. O trabalho de Huse e Janssen mostrou um comportamento universal e uma lei de escala nos sistemas críticos fora do equilíbrio e identificou a existência de um novo expoente crítico dinâmico θ, associado ao comportamento anômalo da magnetização. Fazemos uima breve revisão das transições de fase e fenômeno críticos. Descrevemos o modelo de Ising, a técnica de Monte Carlo e por final, a dinâmica de tempos curtos. Aplicamos a dinâmica de tempos curtos para o modelo de Insing ferromagnéticos em uma rede quadrada com diluição de sítios. Calculamos o expoente dinâmicos θ e z, onde verificamos que existe quebra de classe de universilidade com relação às diferentes concentrações de sítios (p=0.70,0.75,0.80,0.85,0.90,0.95,1.00). calculamos também os expoentes estáticos β e v, onde encontramos pequenas variações com a desordem. Finalmente, apresentamos nossas conclusões e possíveis extensões deste trabalho

Uma janela tropical: análise do desempenho luminoso de ambientes com aberturas sombreadas para o clima de Natal/RN

This master thesis introduces assessment procedures of daylighting performance in office rooms with shaded opening, recommendations for Natal-RN (Latitude 05,47' S, Longitude 35,11' W). The studies assume the need of window exterior shading in hot and humid climate buildings. The daylighting performance analyses are based on simulated results for three levels of illuminance (300,500 e 1000 lux) between 08h00 e 16h00, in rooms with 2,80 m height, 6 m large and 4 m, 6 m e 8 m depths, with a centered single opening, window wall ratio (20%, 40% e 60%), four orientations (North, East, South and West), and two types of sky (clear and partially cloudy). The sky characteristics were statistically determined based on hourly data from INPE-CRN solar and daylighting weather station. The lighting performance is resulted from dynamic computer simulation of 72 models using Troplux 3.12. The simulation results were assessed using a new parameter to quantify the use of interior daylighting, the useful percentage of daylight (PULN), which corresponds to the time fraction with satisfactory light, in accordance with the illuminance design. The passive zone depths are defined based on the PULN. Despite the failures of illuminance data from the weather station, the analyses ratified the high potential of daylighting for shaded rooms. The most influential variables on the lighting performance are the opening size and the illuminance of design, while the orientation is a little influential

Otimização de modelos de predição da perda de propagação aplicáveis em 3,5GHZ utilizando algoritmos genéticos

The telecommunications industry has experienced recent changes, due to increasing quest for access to digital services for data, video and multimedia, especially using the mobile phone networks. Recently in Brazil, mobile operators are upgrading their networks to third generations systems (3G) providing to users broadband services such as video conferencing, Internet, digital TV and more. These new networks that provides mobility and high data rates has allowed the development of new market concepts. Currently the market is focused on the expansion of WiMAX technology, which is gaining increasingly the market for mobile voice and data. In Brazil, the commercial interest for this technology appears to the first award of licenses in the 3.5 GHz band. In February 2003 ANATEL held the 003/2002/SPV-ANATEL bidding, where it offered blocks of frequencies in the range of 3.5 GHz. The enterprises who purchased blocks of frequency were: Embratel, Brazil Telecom (Vant), Grupo Sinos, Neovia and WKVE, each one with operations spread in some regions of Brazil. For this and other wireless communications systems are implemented effectively, many efforts have been invested in attempts to developing simulation methods for coverage prediction that is close to reality as much as possible so that they may become believers and indispensable tools to design wireless communications systems. In this work wasm developed a genetic algorithm (GA's) that is able to optimize the models for predicting propagation loss at applicable frequency range of 3.5 GHz, thus enabling an estimate of the signal closer to reality to avoid significant errors in planning and implementation a system of wireless communication

Uma janela tropical: análise do desempenho luminoso de ambientes com aberturas sombreadas para o clima de Natal/RN

This master thesis introduces assessment procedures of daylighting performance in office rooms with shaded opening, recommendations for Natal-RN (Latitude 05,47' S, Longitude 35,11' W). The studies assume the need of window exterior shading in hot and humid climate buildings. The daylighting performance analyses are based on simulated results for three levels of illuminance (300,500 e 1000 lux) between 08h00 e 16h00, in rooms with 2,80 m height, 6 m large and 4 m, 6 m e 8 m depths, with a centered single opening, window wall ratio (20%, 40% e 60%), four orientations (North, East, South and West), and two types of sky (clear and partially cloudy). The sky characteristics were statistically determined based on hourly data from INPE-CRN solar and daylighting weather station. The lighting performance is resulted from dynamic computer simulation of 72 models using Troplux 3.12. The simulation results were assessed using a new parameter to quantify the use of interior daylighting, the useful percentage of daylight (PULN), which corresponds to the time fraction with satisfactory light, in accordance with the illuminance design. The passive zone depths are defined based on the PULN. Despite the failures of illuminance data from the weather station, the analyses ratified the high potential of daylighting for shaded rooms. The most influential variables on the lighting performance are the opening size and the illuminance of design, while the orientation is a little influential

Aplicações da teoria da percolação à modelagem e simulação de reservatórios de petróleo

In this thesis we study some problems related to petroleum reservoirs using methods and concepts of Statistical Physics. The thesis could be divided percolation problem in random multifractal support motivated by its potential application in modelling oil reservoirs. We develped an heterogeneous and anisotropic grid that followin two parts. The first one introduce a study of the percolations a random multifractal distribution of its sites. After, we determine the percolation threshold for this grid, the fractal dimension of the percolating cluster and the critical exponents ß and v. In the second part, we propose an alternative systematic of modelling and simulating oil reservoirs. We introduce a statistical model based in a stochastic formulation do Darcy Law. In this model, the distribution of permeabilities is localy equivalent to the basic model of bond percolation

Propriedades críticas de sistemas fora do equilíbrio via simulação Monte Carlo

Conselho Nacional de Desenvolvimento Científico e Tecnológico

Análise de métodos para aplicação de ventilação natural em projetos de edificações em Natal-RN

Natural ventilation is an efficient bioclimatic strategy, one that provides thermal comfort, healthful and cooling to the edification. However, the disregard for quality environment, the uncertainties involved in the phenomenon and the popularization of artificial climate systems are held as an excuse for those who neglect the benefits of passive cooling. The unfamiliarity with the concept may be lessened if ventilation is observed in every step of the project, especially in the initial phase in which decisions bear a great impact in the construction process. The tools available in order to quantify the impact of projected decisions consist basically of the renovation rate calculations or computer simulations of fluids, commonly dubbed CFD, which stands for Computational Fluid Dynamics , both somewhat apart from the project s execution and unable to adapt for use in parametric studies. Thus, we chose to verify, through computer simulation, the representativeness of the results with a method of simplified air reconditioning rate calculation, as well as making it more compatible with the questions relevant to the first phases of the project s process. The case object consists of a model resulting from the recommendations of the Código de Obras de Natal/ RN, customized according to the NBR 15220. The study has shown the complexity in aggregating a CFD tool to the process and the need for a method capable of generating data at the compatible rate to the flow of ideas and are discarded during the project s development. At the end of our study, we discuss the necessary concessions for the realization of simulations, the applicability and the limitations of both the tools used and the method adopted, as well as the representativeness of the results obtained

Análise de métodos de predição de conforto térmico de habitação em clima quente-úmido com condicionamento passivo

The assessment of building thermal performance is often carried out using HVAC energy consumption data, when available, or thermal comfort variables measurements, for free-running buildings. Both types of data can be determined by monitoring or computer simulation. The assessment based on thermal comfort variables is the most complex because it depends on the determination of the thermal comfort zone. For these reasons, this master thesis explores methods of building thermal performance assessment using variables of thermal comfort simulated by DesignBuilder software. The main objective is to contribute to the development of methods to support architectural decisions during the design process, and energy and sustainable rating systems. The research method consists on selecting thermal comfort methods, modeling them in electronic sheets with output charts developed to optimize the analyses, which are used to assess the simulation results of low cost house configurations. The house models consist in a base case, which are already built, and changes in thermal transmittance, absorptance, and shading. The simulation results are assessed using each thermal comfort method, to identify the sensitivity of them. The final results show the limitations of the methods, the importance of a method that considers thermal radiance and wind speed, and the contribution of the chart proposed

Análise paramétrica da simulação composicional do processo de Drenagem Gravitacional Assistida por Gás (GAGD)

In Brazil and around the world, oil companies are looking for, and expected development of new technologies and processes that can increase the oil recovery factor in mature reservoirs, in a simple and inexpensive way. So, the latest research has developed a new process called Gas Assisted Gravity Drainage (GAGD) which was classified as a gas injection IOR. The process, which is undergoing pilot testing in the field, is being extensively studied through physical scale models and core-floods laboratory, due to high oil recoveries in relation to other gas injection IOR. This process consists of injecting gas at the top of a reservoir through horizontal or vertical injector wells and displacing the oil, taking advantage of natural gravity segregation of fluids, to a horizontal producer well placed at the bottom of the reservoir. To study this process it was modeled a homogeneous reservoir and a model of multi-component fluid with characteristics similar to light oil Brazilian fields through a compositional simulator, to optimize the operational parameters. The model of the process was simulated in GEM (CMG, 2009.10). The operational parameters studied were the gas injection rate, the type of gas injection, the location of the injector and production well. We also studied the presence of water drive in the process. The results showed that the maximum vertical spacing between the two wells, caused the maximum recovery of oil in GAGD. Also, it was found that the largest flow injection, it obtained the largest recovery factors. This parameter controls the speed of the front of the gas injected and determined if the gravitational force dominates or not the process in the recovery of oil. Natural gas had better performance than CO2 and that the presence of aquifer in the reservoir was less influential in the process. In economic analysis found that by injecting natural gas is obtained more economically beneficial than CO2

Simulação do escoamento monofásico em um estágio de uma bomba centrífuga utilizando técnicas de fluidodinâmica computacional

Oil production and exploration techniques have evolved in the last decades in order to increase fluid flows and optimize how the required equipment are used. The base functioning of Electric Submersible Pumping (ESP) lift method is the use of an electric downhole motor to move a centrifugal pump and transport the fluids to the surface. The Electric Submersible Pumping is an option that has been gaining ground among the methods of Artificial Lift due to the ability to handle a large flow of liquid in onshore and offshore environments. The performance of a well equipped with ESP systems is intrinsically related to the centrifugal pump operation. It is the pump that has the function to turn the motor power into Head. In this present work, a computer model to analyze the three-dimensional flow in a centrifugal pump used in Electric Submersible Pumping has been developed. Through the commercial program, ANSYS® CFX®, initially using water as fluid flow, the geometry and simulation parameters have been defined in order to obtain an approximation of what occurs inside the channels of the impeller and diffuser pump in terms of flow. Three different geometry conditions were initially tested to determine which is most suitable to solving the problem. After choosing the most appropriate geometry, three mesh conditions were analyzed and the obtained values were compared to the experimental characteristic curve of Head provided by the manufacturer. The results have approached the experimental curve, the simulation time and the model convergence were satisfactory if it is considered that the studied problem involves numerical analysis. After the tests with water, oil was used in the simulations. The results were compared to a methodology used in the petroleum industry to correct viscosity. In general, for models with water and oil, the results with single-phase fluids were coherent with the experimental curves and, through three-dimensional computer models, they are a preliminary evaluation for the analysis of the two-phase flow inside the channels of centrifugal pump used in ESP systems

Prevalência e fatores associados à dor em professores de educação física em academias de ginástica da cidade do Salvador-BA

Physical Education professionals are usually exposed to excessive physical workloads that evolve into painful symptomatology and muscle and bone disorders that originate from the work-related exercises. Purposo: The goal of this study was to investigate the prevalence and factors associated with pain painful symptomatology in teachers in gymnastics academies. An analytical transversal cut study was performed involving 163 gymnastics teachers working in the main gyms in the city of Salvador-BA. For evaluation of pain, validated versions in Portuguese of the McGill Protocol and the Wisconsin Pain Inventory were used. For obtain results of descriptive statistical analysis of the collected data was performed, followed by TStudent, and Pearson and Spearman correlation tests to verify possible correlations between the presence of pain and other variables which were considered independent. Finally, for the identification of potential risk factors associated with pain, a binary logistic regression analysis was performed. For all statistical analysis, we cnsidered p< 0.05. Results: The painful symptoms was reported by 88.3% of the subjects surveyed. High pain levels were observed in 63.8% of the interviewed professionals, where the intensity varied from moderate to severe. Pain in the lumbar region was present in 55.2% of subjects. Positive correlations were found between the level of pain intensity and the variables related with the workload activity and daily life of the teachers in almost all body joints analyzed. Some factors had been verified associates to the painful sintomatologia as the age of the professionals, the daily hours load of labor work, and the lack of interval of rest between the lessons. Conclusions: We found a high prevalence in gym teachers working in the city of Salvador-BA, which interfered in various daily activities of their home and professional lives. The most affected region was the lumbar region, followed by the knees, neck, shoulders, ankles, hands, hips, feet, elbows and forearms. The factors associated with development of painful symptomatology were the age of the professionals, daily hours of work and the lack of rest intervals between lessons. The high prevalence of pain in Physical Education teachers can be regarded as a serious occupational health problem, which would demand the urgent deployment of preventive intervention programs to minimize the impact of pain among these professionals

Correr, saltar, lançar, dialogar :uma reflexão sobre corpo e aprendizagem nas aulas de educação física

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Como vão se formando os professores em física e química: embates entre o ser, o ter e o fazer na formação de licenciandos da UFRN sob a perspectiva da teoria das representações sociais

The purpose of this work is to approach and understand the Social Representations (SR) (MOSCOVICI, 2003) about Physics and Chemistry from people who are major in these courses, as well as their Social Representations about teaching . We took as principle that approaching these representations it would be possible to relate their symbolic contents, in order to show how people who are following the first segments of bachelor degree courses in Physics and Chemistry become teachers, taking into account a psychosocial view. Two source of data was used during this research: Free-association Technique FA (ABRIC, 1994); and Multiple Classification Procedure (MCP) (ROAZZI, 1995). The analytical treatment of the collected data from FA was done according to the proposition of Grize, Vergés and Silem (1987 apud ABRIC, 1994, p. 66). MCP data were analyzed through MSA (Multidimensional Scalogram Analysis) and SSA (Singular Spectrum Analysis) methods associated with the Facet Theory (BILSKY, 2003). The discourses of MCP discussing groups at the moment of explanations were studied by Content Analysis as it was proposed by Bardin (1977) and Franco (2005). Indicative of an approach to the relations with knowledge (CHARLOT, 2000), the connections which aroused from the analyses showed that the group of future majors in Physics thought that this scientific field was based on a rationalist conception, influencing the idealization sense of the phenomena to be explained by Physics. Thus, Physics as school content started to require the student of the fundamental and high school to think abstractly as a cognitive skill of learning. The identifying elements observed in the relations between SR about Physics and Teaching aroused from the antagonism between future majors and their teacher, as well as from the speculation between their fundamental and high school students and themselves, mainly when they had to face the act of teaching due to the obstacles imposed by the own educational system, and by the weakness of the initial preparation. The group of future majors in Chemistry, through its discourses, showed these relations when they conceived empiricist Chemistry and said that teaching was the way of transmission of this knowledge, and didactics of Chemistry teaching was the direction to learning through pedagogic methods in order to lead the students to discoveries. The psychosocial contents which were built and showed from the symbolic relations in the studied SR achieved the relation of identity. This relation revealed identifying elements for these people, resulting from the traffic between their condition as students of Chemistry, and as teachers regarding their work, what placed the current relational contents in the teaching space, named as Knowledge changing and Adaptability . In order to study emerging questions in the discussing environment about formation and teaching professionalization, we focused the psychosocial view on this traffic and managed to observe epistemological practical and pedagogic obstacles that limited a configuration of the teaching work as a professional activity, especially from the particular conditions which led the relations of senses to Physics , Chemistry and Teaching ; and Chemistry and Physics as it was seen in this research. Generally speaking, we noted that these obstacles can denounce such obstacles concerning to the pedagogic doings which mainly impair the learning process of fundamental and high school students