Cinemática de partículas em fluidos de viscosidade variável com o tempo e sua aplicação na construção de poços de petróleo: avaliação durante paradas operacionais

The new oil reservoirs discoveries in onshore and ultra deep water offshore fields and complex trajectories require the optimization of procedures to reduce the stops operation during the well drilling, especially because the platforms and equipment high cost, and risks which are inherent to the operation. Among the most important aspects stands out the drilling fluids project and their behavior against different situations that may occur during the process. By means of sedimentation experiments, a correlation has been validated to determe the sedimentation particles velocity in variable viscosity fluids over time, applying the correction due to effective viscosity that is a shear rate and time function. The viscosity evolution over time was obtained by carrying out rheologic tests using a fixed shear rate, small enough to not interfere in the fluid gelling process. With the sedimentation particles velocity and the fluid viscosity over time equations an iterative procedure was proposed to determine the particles displacement over time. These equations were implemented in a case study to simulate the cuttings sedimentation generated in the oil well drilling during stops operation, especially in the connections and tripping, allowing the drilling fluid project in order to maintain the cuttings in suspension, avoiding risks, such as stuck pipe and in more drastic conditions, the loss of the well

Terapia ocupacional em ação interdisciplinar: jogos educativo-nutricionais na prevenção da obesidade infantil

The inter-subjectivity is the answer in the search for the solution of complex problems, which concerns interfaces of knowledge, respecting their borders. This paradigm is essential in the author's work. So, the search on screen is based on this perspective, by using inter-subject groups of work conduced by professionals of Computer Science, Social Communication, Architecture and Urbanism, Pedagogy, Psicopegagogy, Nutritional Science, Endocrinology, Occupational Therapy and Nursing, it was also part of this group an 8 year old child, daughter of one of the professional who took part of the group. This thesis aims to present the course of investigation developed, analyzing the action of inter-subject Occupational Therapy and Nutrition on the promotion of learning nutritional concepts through educative-nutritional games in order to prevent child's obesity in an educative context. The research was analytic, interventionist and almost experimental. It took place in a public school in Fortaleza, Ceará, Brazil, between August and December 2004. It was selected a sample non-probabilistic, by convenience, of 200 children, born from 1994 to 1996. It was selected almost nonprobabilistically, by convenience, 200 children born between 1994 and 1996. To analyze the results it was used a triangulation, associated by quantitative and qualitative approaches. The basis collect happened through games specially manufactured to these research- video-games, board games, memory games, puzzles, scramble, searching words and iterative basics. There were semi-structured interviews, direct and structured observations and focus in-groups. It was noticed the efficiency of educativenutritional games in the learning process, which lead to a changing of attitude towards the eating choices. These games gave similar results in relation to the compared variations preferences, experience and attitudes, theses attitudes were observed through the game; and the categories to compare the possibility of learning by playing, the fantasy in the learning process, learning concepts of nutritional education and the need of help in the learning process (mediation). It was proved that educativenutritional games could be used to teach nutritional concepts, in an inter-subjective action of Occupational Therapy and Nutrition in schools. The simultaneous application of these games lead to the optimization of child s learning process. It should be emphasized the need of studies about the adaptation of tools used in a child s Nutritional Education, with the help of inter-subjective action. Because just one subject, in a fractionated way can give an answer to complex problems and help to a change of the reality with effectiveness and resolution

Sobre uma cultura do mal-estar com a política

The current dissertation has as its main object of study the malaise with politics phenomenon. To comprehend it, is carried out in this work a inquiry, in different stages of analysis, based in the empirical data raised by the research Os Processos Sociais de Recepção do Horário Gratuito de Propaganda Eleitoral , made by the Grupo de Estudos Mídia e Poder, of the Universidade Federal do Rio Grande do Norte, during the local elections of 2004 in the city of Natal. Based in the focus group technique, such research raised an ample set of information about the decoding process of the electoral television programs, made by six different groups of citizens from the popular classes. Beginning from the presuppose which such process is influenced by the representations about politics made by those subjects, we use that set of empirical information to inquiry not only the decoding, but that same representations which this process is based. In this way, we analyse, in one side, the globally contrary decoding which subjects made from a conforming code of opposition and, in the other, the structure of feeling which it s based, called structure of feeling of the malaise with politics. Such structure is compound by generating themes which expresses the contraposition about the institutionalized politics and, in the same time, a resignation about politics which fortifies the dominant groups hegemony. We support the thesis which this set of representations about politics is caused by the denial of rights frame which those subjects are immersed

Globos e mapas ao alcance das mãos : ensino de matemática numa perspectiva de alfabetização funcional na EJA

The following dissertation has as its main advantage the privilege of visualizing the literacy processes through the angle of the functional perspective, which does not see the literary process as a practice solely based on the decoding of alphabetical codes, and then allows for the opening of ample spaces for the allocation of mathematical skills in the realms of the functional literacy. The main object of this study was to investigate which are the contributions that a sequence of activities and of methodologies developed for the teaching of Geometry could provide for a part of the functional literacy process in mathematics of youngsters and adults of EJA, corresponding to the acquisition or to the improvement of skills related to the orientation capacity. The focus of the analyses consisted in the practice of these activities with the young and adult students of an EJA class belonging to a municipal public school of Natal/RN. The legacies of Paulo Freire about the redimensioning of the role of the teacher, of the students, of the knowledge and of their connections within the teaching-learning process, prevailed in the actions of the methodology implemented in the classroom and, especially, in the establishing of dialogic connections with the students, which directed all the observations and analyses regarding the collected information. The results indicated that the composition of articulations between the teaching of mathematics and the exploration of maps and the earth globe enabled the creation of multidisciplinary learning environments and situations, where we could observe, gradually, the development of procedures and attitudes indicating the evolution of space-visual type skills

Análise e desenvolvimento de controladores preditivos multivariáveis baseados em multi-modelos bilineares

This work addresses issues related to analysis and development of multivariable predictive controllers based on bilinear multi-models. Linear Generalized Predictive Control (GPC) monovariable and multivariable is shown, and highlighted its properties, key features and applications in industry. Bilinear GPC, the basis for the development of this thesis, is presented by the time-step quasilinearization approach. Some results are presented using this controller in order to show its best performance when compared to linear GPC, since the bilinear models represent better the dynamics of certain processes. Time-step quasilinearization, due to the fact that it is an approximation, causes a prediction error, which limits the performance of this controller when prediction horizon increases. Due to its prediction error, Bilinear GPC with iterative compensation is shown in order to minimize this error, seeking a better performance than the classic Bilinear GPC. Results of iterative compensation algorithm are shown. The use of multi-model is discussed in this thesis, in order to correct the deficiency of controllers based on single model, when they are applied in cases with large operation ranges. Methods of measuring the distance between models, also called metrics, are the main contribution of this thesis. Several application results in simulated distillation columns, which are close enough to actual behaviour of them, are made, and the results have shown satisfactory

Uma Aplicação de Redes Neurais Auto-Organizaveis à Reconstrução Tridimensional de Superfícies

We propose a multi-resolution approach for surface reconstruction from clouds of unorganized points representing an object surface in 3D space. The proposed method uses a set of mesh operators and simple rules for selective mesh refinement, with a strategy based on Kohonen s self-organizing map. Basically, a self-adaptive scheme is used for iteratively moving vertices of an initial simple mesh in the direction of the set of points, ideally the object boundary. Successive refinement and motion of vertices are applied leading to a more detailed surface, in a multi-resolution, iterative scheme. Reconstruction was experimented with several point sets, induding different shapes and sizes. Results show generated meshes very dose to object final shapes. We include measures of performance and discuss robustness.

Desenvolvimento de circuitos planares sobre substratos têxteis

The use of flexible materials for the development of planar circuits is one of the most desired and studied characteristics, lately, by researchers. This happens because the flexibility of the substrate can provide previously impracticable applications, due to the rigidity of the substrates normally used that makes it difficult to fit into the circuits in irregular surfaces. The constant interest in recent years for more lighter devices, increasingly more compacts, flexible and with low cost, led to a new line of research of great interest from both academic and technological views, that is the study and development of textile substrates that can be applied in the development of planar circuits, for applications in the areas of security, biomedical and telecommunications. This paper proposes the development of planar circuits, such as antennas , frequency selective surfaces (FSS) and planar filters, using textile (cotton ticking, jeans and brim santista) as the dielectric substrate and the Pure Copper Polyester Taffeta Fabric, a textile of pure copper, highly conductive, lightweight and flexible, commercially sold as a conductive material. The electrical characteristics of textiles (electric permittivity and loss tangent) were characterized using the transmission line method (rectangular waveguide) and compared with those found in the literature. The structures were analyzed using commercial software Ansoft Designer and Ansoft HFSS, both from the company Ansys and for comparison we used the Iterative Method of Waves (WCIP). For the purpose of validation were built and measured several prototypes of antennas, planar filters and FSS, being possible to confirm an excellent agreement between simulated and measured results

Uma implementação da análise de componentes independentes em plataforma de hardware reconfigurável

Blind Source Separation (BSS) refers to the problem of estimate original signals from observed linear mixtures with no knowledge about the sources or the mixing process. Independent Component Analysis (ICA) is a technique mainly applied to BSS problem and from the algorithms that implement this technique, FastICA is a high performance iterative algorithm of low computacional cost that uses nongaussianity measures based on high order statistics to estimate the original sources. The great number of applications where ICA has been found useful reects the need of the implementation of this technique in hardware and the natural paralelism of FastICA favors the implementation of this algorithm on digital hardware. This work proposes the implementation of FastICA on a reconfigurable hardware platform for the viability of it's use in blind source separation problems, more specifically in a hardware prototype embedded in a Field Programmable Gate Array (FPGA) board for the monitoring of beds in hospital environments. The implementations will be carried out by Simulink models and it's synthesizing will be done through the DSP Builder software from Altera Corporation.

Caracterização de circuitos planares de micro-ondas pelo método iterativo das ondas

The planar circuits are structures that increasingly attracting the attention of researchers, due the good performance and capacity to integrate with other devices, in the prototyping of systems for transmitting and receiving signals in the microwave range. In this context, the study and development of new techniques for analysis of these devices have significantly contributed in the design of structures with excellent performance and high reliability. In this work, the full-wave method based on the concept of electromagnetic waves and the principle of reflection and transmission of waves at an interface, Wave Concept Iterative Procedure (WCIP), or iterative method of waves is described as a tool with high precision study microwave planar circuits. The proposed method is applied to the characterization of planar filters, microstrip antennas and frequency selective surfaces. Prototype devices were built and the experimental results confirmed the proposed mathematical model. The results were also compared with simulated results by Ansoft HFSS, observing a good agreement between them.

Otimização de um sistema de distribuição predial de água fria: estudo de caso

This dissertation presents a methodology to the optimization of a predial system of cold water distribution. It s about a study of a case applied to the Tropical Buzios Residential Condominium, located in the Búzio s Beach, Nísia Floresta city, the east coast of the Rio Grande do Norte state, twenty kilometers far from Natal. The design of cold water distribution networks according to Norm NBR 5626 of the ABNT - Brazilian Association of Techniques Norms, does not guarantee that the joined solution is the optimal solution of less cost. It s necessary the use of an optimization methodology, that supplies us, between all the possible solutions, the minimum cost solution. In the optimization process of the predial system of water distribution of the Tropical Búzios Condominium, is used Method Granados, that is an iterative algorithm of optimization, based on the Dynamic Programming, that supplies the minimum cost s network, in function of the piezometric quota of the reservoir. For the application of this Method in ramifies networks, is used a program of computer in C language. This process is divided in two stages: attainment of the previous solution and reduction of the piezometric quota of headboard. In the attainment of the previous solution, the minors possible diameters are used that guarantee the limit of maximum speed and the requirements of minimum pressures. The piezometric quota of headboard is raised to guarantee these requirements. In the second stage of the Granados Method, an iterative process is used and it objective is to reduce the quota of headboard gradually, considering the substitution of stretches of the network pipes for the subsequent diameters, considering a minimum addition of the network cost. The diameter change is made in the optimal stretch that presents the lesser Exchange Gradient. The process is locked up when the headboard quota of desired is reached. The optimized network s material costs are calculated, and is made the analysis of the same ones, through the comparison with the conventional network s costs

Oscilações Teta no hipocampo do rato durante tarefa de tomada de decisão espacial

The processing of spatial and episodic information during memory tasks depends on hippocampal theta oscillations. In the present study, I investigated the relationship between theta power and choice selection during spatial decision-making. I recorded local field potentials from the CA1 region of rats retrieving reward locations in a 4-arm maze. In trained but not in naïve animals, I observed a significant increase in theta power during decision-making, which could not be explained by changes in locomotion speed. Furthermore, a Bayesian decoder based on theta power predicted choice outcomes in speed-matched trials. The decoding time course revealed that performance increased above chance before the decision moment exclusively for theta power, remaining flat for other frequency bands. These results occurred for trained animals, but no significant prediction could be made for naïve animals. Altogether, the data support a mnemonic function of theta rhythm during spatial decision-making, indicating that these oscillations correlate with the retrieval of memories required for successful decisions

Model-Driven requirements engineering process aided by ontologies and natural controlled languages

Researches in Requirements Engineering have been growing in the latest few years. Researchers are concerned with a set of open issues such as: communication between several user profiles involved in software engineering; scope definition; volatility and traceability issues. To cope with these issues a set of works are concentrated in (i) defining processes to collect client s specifications in order to solve scope issues; (ii) defining models to represent requirements to address communication and traceability issues; and (iii) working on mechanisms and processes to be applied to requirements modeling in order to facilitate requirements evolution and maintenance, addressing volatility and traceability issues. We propose an iterative Model-Driven process to solve these issues, based on a double layered CIM to communicate requirements related knowledge to a wider amount of stakeholders. We also present a tool to help requirements engineer through the RE process. Finally we present a case study to illustrate the process and tool s benefits and usage

Método de Projeções Ortogonais

The problem treated in this dissertation is to establish boundedness for the iterates of an iterative algorithm in 2, under some technical conditions. However, this paper uses non-trivial intuitive arguments and its proofs lack suficient rigor. In this dissertation we discuss and strengthen the results of this paper, in order to complete and simplify its proofs