Interface para tecnologia assistiva baseada em eletrooculografia

We propose in this work, a new method of conceptual organization of areas involving assistive technology, categorizing them in a logical and simple manner; Furthermore, we also propose the implementation of an interface based on electroculography, able to generate high-level commands, to trigger robotic, computer and electromechanical devices. To validate the eye interface, was developed an electronic circuit associated with a computer program that captured the signals generated by eye movements of users, generating high-level commands, able to trigger an active bracing and many other electromechanical systems. The results showed that it was possible to control many electromechanical systems through only eye movements. The interface is presented as a viable way to perform the proposed task and can be improved in the signals analysis in the the digital level. The diagrammatic model developed, presented as a tool easy to use and understand, providing the conceptual organization needs of assistive technology

Controle feedback de nível baseado em sensor de imagem aplicado ao equipamento misturador-decantador à inversão de fases (MDIF®)

The treatment of wastewaters contaminated with oil is of great practical interest and it is fundamental in environmental issues. A relevant process, which has been studied on continuous treatment of contaminated water with oil, is the equipment denominated MDIF® (a mixer-settler based on phase inversion). An important variable during the operation of MDIF® is the water-solvent interface level in the separation section. The control of this level is essential both to avoid the dragging of the solvent during the water removal and improve the extraction efficiency of the oil by the solvent. The measurement of oil-water interface level (in line) is still a hard task. There are few sensors able to measure oil-water interface level in a reliable way. In the case of lab scale systems, there are no interface sensors with compatible dimensions. The objective of this work was to implement a level control system to the organic solvent/water interface level on the equipment MDIF®. The detection of the interface level is based on the acquisition and treatment of images obtained dynamically through a standard camera (webcam). The control strategy was developed to operate in feedback mode, where the level measure obtained by image detection is compared to the desired level and an action is taken on a control valve according to an implemented PID law. A control and data acquisition program was developed in Fortran to accomplish the following tasks: image acquisition; water-solvent interface identification; to perform decisions and send control signals; and to record data in files. Some experimental runs in open-loop were carried out using the MDIF® and random pulse disturbances were applied on the input variable (water outlet flow). The responses of interface level permitted the process identification by transfer models. From these models, the parameters for a PID controller were tuned by direct synthesis and tests in closed-loop were performed. Preliminary results for the feedback loop demonstrated that the sensor and the control strategy developed in this work were suitable for the control of organic solvent-water interface level

Trendtv : uma arquitetura para mudança automática de canais de TV baseada em redes sociais virtuais com graus de amizade e suporte a múltiplos dispositivos no cenário da TV digital brasileira

Due to the large amount of television content, which emerged from the Digital TV, viewers are facing a new challenge, how to find interesting content intuitively and efficiently. The Personalized Electronic Programming Guides (pEPG) arise as an answer to this complex challenge. We propose TrendTV a layered architecture that allows the formation of social networks among viewers of Interactive Digital TV based on online microblogging. Associated with a pEPG, this social network allows the viewer to perform content filtering on a particular subject from the indications made by other viewers of his network. Allowing the viewer to create his own indications for a particular content when it is displayed, or to analyze the importance of a particular program online, based on these indications. This allows any user to perform filtering on content and generate or exchange information with other users in a flexible and transparent way, using several different devices (TVs, Smartphones, Tablets or PCs). Moreover, this architecture defines a mechanism to perform the automatic exchange of channels based on the best program that is showing at the moment, suggesting new components to be added to the middleware of the Brazilian Digital TV System (Ginga). The result is a constructed and dynamic database containing the classification of several TV programs as well as an application to automatically switch to the best channel of the moment

Análise gráfica de elementos do design na interface de aplicativos de notícias baseados em mobilidade: um estudo do aplicativo Brasil 247

The different characteristics and needs of mobile device users, the situations in which these devices are operated and the limitations and characteristics of these devices are all factors which influence usability and ergonomics; two elements highly required for achieving successful interaction between users and devices. This research aims to identify characteristics of interface design for apps in mobile device applications, focussing on design, visual publishing and content editing, and the actual process of creation of these interfaces, with a view to guarantee quality interaction through touch technology, in observance of service limitations, the opportunities offered by the devices and the application requirements. The study will examine the interface of the mobile device application titled “Brasil 247” which provides news broadcasts using the concept of usability and ergonomics mainly in the field of adaptation, searching and browsing informative articles, as well as clarifying the processes and techniques necessary to carry out interaction tests which seek to evaluate the usability of interface.

Bibliotecas digitais em Arquitetura e urbanismo: um estudo sobre a arquitetura da informação digital

The goal of this paper was to search the state of the art from the Digital Libraries in Architecture and Urbanism in the Higher Education Institutions (IES) through conceptualizations and showing the importance of Digital Libraries in the disclosure and easing of information transferring. Questions about digital information architecture, usability, digital preservation and accessibility were approached. The research was made in the websites of Brazilian Universities, firstly to identify the institutions which offered the Architecture and Urbanism course, focusing on postgraduate education. After identifying the offering, the research was done by analyzing the contents, storage and dissemination and access to information, these libraries. It was found that the digital libraries are increasingly and taking part of organizations and educational institutions focusing on the knowledge dissemination releasing digitally information that may be needed for institution or the individual. A monitoring was done over of the physical and computational restructuring of the Board of Studies and Research in Architecture and Urbanism (Câmara de Estudos e Pesquisa em Arquitetura e Urbanismo, CEPAU), from the Architecture and Urbanism Course of the Federal University of Rio Grande do Norte (UFRN), showing the need of installing a Digital Library to integrate the databases of PPGAU s research groups, which today remain independent, with no interface among themselves. The research chosen area was Architecture and Urbanism, because there is a gap and little documentation about digital libraries in this area

Interface cena e tecnologia : composições cênicas mediadas

Based on the presupposition that the arts in the West always counted on resources, supports, and devices pertaining to its time context, an reflection is intended regarding the scenic compositions mediated by digital technologies do. Such technologies are inserted in the daily routine, also composing artistic experiments, thus playing a dialogical role with the art/technology intersection. Therefore, the proposal is to investigate what relationships are established in the contemporary theatrical scene from the contagion by digital technologies, aiming at establishing this parallel through a dialogue with the authors discussing the subject, and also based on the group practices having technological resources as a determinant factor in their plays. Furthermore, a reflection should be made on the scene that incorporates or is carried out in intermediatic events, analyzing how digital technologies (re)configure compositional processes of the plays by GAG Phila7, in the city of São Paulo/SP. For such, the dissertation is organized in three sections comprising four moments, to wit: brief overview of the field, contextualization, poetic analysis and synthesis. Qualitative methods are used as the methodological proposal: semi-structure interview, note and document taking (program, website, playing book, disclosure material for advertising text, photographs, and videos). Within the universe of qualitative research, it works with the epistemological perspective of the Gadamer philosophical hermeneutics. The possibilities allowed by the double virtual (Internet/web) generated a type of theater with another material basis and new forms of organization and structure, being possible to perceive that such technological advances and the arts are mutually contaminated, generating a dislocation in the logics of theatrical composition, movement beginning with the artistic vanguards, gradually intensified, thus offering new possibilities of constructions and hybridization of the of the most different possible types. Experiment ―Profanações_superfície de eventos de construção coletiva‖, idealized by Phila7 is inserted in this perspective. Object of the discussion of such research, the experiment works with possible poetics arising from the intersection with the digital technologies, aiming at identifying and problematizing the challenges from the technological evolution and expansion in a scenic context

RoboEduc: especificação de um software educacional para ensino da robótica às crianças como uma ferramenta de inclusão digital

Because of social exclusion in Brazil and having as focus the digital inclusion, was started in Federal University of Rio Grande do Norte a project that could talk, at the same time, about concepts of collaborative learning and educational robotics , focused on children digitally excluded. In this context was created a methodology that approaches many subjects as technological elements (e. g. informatics and robotics) and school subjects (e. g. Portuguese, Mathematics, Geography, History), contextualized in everyday situations. We observed educational concepts of collaborative learning and the development of capacities from those students, as group work, logical knowledge and learning ability. This paper proposes an educational software for robotics teaching called RoboEduc, created to be used by children digitally excluded from primary school. Its introduction prioritizes a friendly interface, that makes the concepts of robotics and programming easy and fun to be taught. With this new tool, users without informatics or robotics previous knowledge are able to control a robot, previously set with Lego kits, or even program it to carry some activities out. This paper provides the implementation of the second version of the software. This version presents the control of the robot already used. After were implemented the different levels of programming linked to the many learning levels of the users and their different interfaces and functions. Nowadays, has been implemented the third version, with the improvement of each one of the mentioned stages. In order to validate, prove and test the efficience of the developed methodology to the RoboEduc, were made experiments, through practice of robotics, with children for fourth and fifth grades of primary school at the City School Professor Ascendino de Almeida, in the suburb of Natal (west zone), Rio Grande do Norte. As a preliminary result of the current technology, we verified that the use of robots associated with a well elaborated software can be spread to users that know very little about the subject, without the necessity of previous advanced technology knowledges. Therefore, they showed to be accessible and efficient tools in the process of digital inclusion

Classificação Automática de Modulação Digital com uso de Correntropia para Ambientes de Rádio Cognitivo

Modern wireless systems employ adaptive techniques to provide high throughput while observing desired coverage, Quality of Service (QoS) and capacity. An alternative to further enhance data rate is to apply cognitive radio concepts, where a system is able to exploit unused spectrum on existing licensed bands by sensing the spectrum and opportunistically access unused portions. Techniques like Automatic Modulation Classification (AMC) could help or be vital for such scenarios. Usually, AMC implementations rely on some form of signal pre-processing, which may introduce a high computational cost or make assumptions about the received signal which may not hold (e.g. Gaussianity of noise). This work proposes a new method to perform AMC which uses a similarity measure from the Information Theoretic Learning (ITL) framework, known as correntropy coefficient. It is capable of extracting similarity measurements over a pair of random processes using higher order statistics, yielding in better similarity estimations than by using e.g. correlation coefficient. Experiments carried out by means of computer simulation show that the technique proposed in this paper presents a high rate success in classification of digital modulation, even in the presence of additive white gaussian noise (AWGN)

Superando os riscos da segurança baseada em perímetro - Uma abordagem com identificação federada através de certificados digitais A3/ICP-Brasil e SAML

The traditional perimeter-based approach for computer network security (the castle and the moat model) hinders the progress of enterprise systems and promotes, both in administrators and users, the delusion that systems are protected. To deal with the new range of threats, a new data-safety oriented paradigm, called de-perimeterisation , began to be studied in the last decade. One of the requirements for the implementation of the de-perimeterised model of security is the definition of a safe and effective mechanism for federated identity. This work seeks to fill this gap by presenting the specification, modelling and implementation of a mechanism for federated identity, based on the combination of SAML and X.509 digital certificates stored in smart-cards, following the A3 standard of ICP-Brasil (Brazilian official certificate authority and PKI)

Projeto e Implementação em Ambiente Foundation Fieldbus de Filtragem Estocástica Baseada em Análise de Componentes Independentes (M175)

This work considers the development of a filtering system composed of an intelligent algorithm, that separates information and noise coming from sensors interconnected by Foundation Fieldbus (FF) network. The algorithm implementation will be made through FF standard function blocks, with on-line training through OPC (OLE for Process Control), and embedded technology in a DSP (Digital Signal Processor) that interacts with the fieldbus devices. The technique ICA (Independent Component Analysis), that explores the possibility of separating mixed signals based on the fact that they are statistically independent, was chosen to this Blind Source Separation (BSS) process. The algorithm and its implementations will be Presented, as well as the results

Adaptação eletrônica de um leitor mecânico de coto, investigação e desenvolvimento de interface CAD

Due to advances in the manufacturing process of orthopedic prostheses, the need for better quality shape reading techniques (i.e. with less uncertainty) of the residual limb of amputees became a challenge. To overcome these problems means to be able in obtaining accurate geometry information of the limb and, consequently, better manufacturing processes of both transfemural and transtibial prosthetic sockets. The key point for this task is to customize these readings trying to be as faithful as possible to the real profile of each patient. Within this context, firstly two prototype versions (α and β) of a 3D mechanical scanner for reading residual limbs shape based on reverse engineering techniques were designed. Prototype β is an improved version of prototype α, despite remaining working in analogical mode. Both prototypes are capable of producing a CAD representation of the limb via appropriated graphical sheets and were conceived to work purely by mechanical means. The first results were encouraging as they were able to achieve a great decrease concerning the degree of uncertainty of measurements when compared to traditional methods that are very inaccurate and outdated. For instance, it's not unusual to see these archaic methods in action by making use of ordinary home kind measure-tapes for exploring the limb's shape. Although prototype β improved the readings, it still required someone to input the plotted points (i.e. those marked in disk shape graphical sheets) to an academic CAD software called OrtoCAD. This task is performed by manual typing which is time consuming and carries very limited reliability. Furthermore, the number of coordinates obtained from the purely mechanical system is limited to sub-divisions of the graphical sheet (it records a point every 10 degrees with a resolution of one millimeter). These drawbacks were overcome by designing the second release of prototype β in which it was developed an electronic variation of the reading table components now capable of performing an automatic reading (i.e. no human intervention in digital mode). An interface software (i.e. drive) was built to facilitate data transfer. Much better results were obtained meaning less degree of uncertainty (it records a point every 2 degrees with a resolution of 1/10 mm). Additionally, it was proposed an algorithm to convert the CAD geometry, used by OrtoCAD, to an appropriate format and enabling the use of rapid prototyping equipment aiming future automation of the manufacturing process of prosthetic sockets.

O impacto das tarefas de aprendizagem mediadas pela lousa digital interativa na motivação situacional de aprendizes de inglês

Some authors have suggested that learning tasks conducted in L2 classes can motivate learners in different ways. Similarly, Interactive Whiteboards (IWB) have already been linked as drivers to engagement and enthusiasm in L2 classes, which may cause some impact on affective variables that influence learning (e.g. motivation). This crosssectional mixed-methods study aims to understand how situational motivation caused by learning tasks mediated by the IWB impact participants. We seek to answer the following research questions: (1) How does motivation as a personality trait of the learner relate to his/her additional language learning performance?, (2) How does the type of learning task mediated by the IWB impact the learner s motivation?, (3) How does motivation vary along the learning task mediated by the IWB? and (4) What is the relation between the learning task motivation and the learners perception about the task mediated by the IWB? Data collection lasted four months with 29 learners from a private language school. The instruments used were the following: (a) an initial questionnaire (adapted from the Attitudes/Motivation Test Battery by GARDNER, 2004), (b) situation-specific on-line scales to assess learners motivation in three moments: before, during and after the task, and analyze how motivation varies along the task; (c) class observations and field notes resulting from these observations, (d) participants end-of-course grades to understand the connection between academic success and their motivational profiles and (e) a final questionnaire with the qualitative purpose to know learners perceptions about the tasks mediated by the IWB. Our theoretical framework is based on Task-Based Learning and cognitive aspects present in tasks (WILLIS, 1996; SKEHAN, 1996), theories on motivation and second language learning (GARDNER, 2001; DÖRNYEI e OTTÓ, 1998; DÖRNYEI, 2000; 2002) and conceptions about L2 learning mediated by technology (GIBSON, 2001; OLIVEIRA, 2001; MILLER et al, 2005). Our results do not point out to a significative correlation between learners end-of-course grades and their motivational profiles. However, they indicate that there is some variability in situational motivation along the tasks, even among learning tasks from the same type. Furthermore, they show that learners report different perceptions for each learning task and that the impact of the IWB on participants did not have a large proportion

Uma estratégia dirigida a modelos e baseada em linguagem de descrição arquitetural para linhas de produtos de software

Model-oriented strategies have been used to facilitate products customization in the software products lines (SPL) context and to generate the source code of these derived products through variability management. Most of these strategies use an UML (Unified Modeling Language)-based model specification. Despite its wide application, the UML-based model specification has some limitations such as the fact that it is essentially graphic, presents deficiencies regarding the precise description of the system architecture semantic representation, and generates a large model, thus hampering the visualization and comprehension of the system elements. In contrast, architecture description languages (ADLs) provide graphic and textual support for the structural representation of architectural elements, their constraints and interactions. This thesis introduces ArchSPL-MDD, a model-driven strategy in which models are specified and configured by using the LightPL-ACME ADL. Such strategy is associated to a generic process with systematic activities that enable to automatically generate customized source code from the product model. ArchSPLMDD strategy integrates aspect-oriented software development (AOSD), modeldriven development (MDD) and SPL, thus enabling the explicit modeling as well as the modularization of variabilities and crosscutting concerns. The process is instantiated by the ArchSPL-MDD tool, which supports the specification of domain models (the focus of the development) in LightPL-ACME. The ArchSPL-MDD uses the Ginga Digital TV middleware as case study. In order to evaluate the efficiency, applicability, expressiveness, and complexity of the ArchSPL-MDD strategy, a controlled experiment was carried out in order to evaluate and compare the ArchSPL-MDD tool with the GingaForAll tool, which instantiates the process that is part of the GingaForAll UML-based strategy. Both tools were used for configuring the products of Ginga SPL and generating the product source code

BRIDGE: uma ferramenta para o Design de Interfaces de Usuário baseada em especificações IMML

With hardware and software technologies advance, it s also happenning modifications in the development models of computational systems. New methodologies for user interface specification are being created with user interface description languages (UIDL). The UIDLs are a way to have a precise description in a language with more abstraction and independent of how will be implemented. A great problem is that even using these nowadays methodologies, we still have a big distance between the UIDLs and its design, what means, the distance between abstract and concrete. The tool BRIDGE (Interface Design Generator Environment) was created with the intention of being a linking bridge between a specification language (the Interactive Message Modeling Language IMML) and its implementation in Java, linking the abstract (specification) to the concrete (implementation). IMML is a language based on models, that allows the designer works in distinct abstraction levels, being each model a distinct abstraction level. IMML is a XML language, that uses the Semiotic Engineering concepts, that deals the computational system, with the user interface and its elements like a metacommunicative artifact, where these elements must to transmit a message to the user about what task must to be realized and the way to reach this goal. With BRIDGE, we intend to supply a lot of support to the design task, being the user interface prototipation the greater of them. BRIDGE allows the design becomes easier and more intuitive coming from an interface specification language

Técnica para segmentação automática de imagens microscópicas de componentes sanguíneos e classificação diferencial de leucócitos baseada em lógica fuzzy

Automatic detection of blood components is an important topic in the field of hematology. The segmentation is an important stage because it allows components to be grouped into common areas and processed separately and leukocyte differential classification enables them to be analyzed separately. With the auto-segmentation and differential classification, this work is contributing to the analysis process of blood components by providing tools that reduce the manual labor and increasing its accuracy and efficiency. Using techniques of digital image processing associated with a generic and automatic fuzzy approach, this work proposes two Fuzzy Inference Systems, defined as I and II, for autosegmentation of blood components and leukocyte differential classification, respectively, in microscopic images smears. Using the Fuzzy Inference System I, the proposed technique performs the segmentation of the image in four regions: the leukocyte’s nucleus and cytoplasm, erythrocyte and plasma area and using the Fuzzy Inference System II and the segmented leukocyte (nucleus and cytoplasm) classify them differentially in five types: basophils, eosinophils, lymphocytes, monocytes and neutrophils. Were used for testing 530 images containing microscopic samples of blood smears with different methods. The images were processed and its accuracy indices and Gold Standards were calculated and compared with the manual results and other results found at literature for the same problems. Regarding segmentation, a technique developed showed percentages of accuracy of 97.31% for leukocytes, 95.39% to erythrocytes and 95.06% for blood plasma. As for the differential classification, the percentage varied between 92.98% and 98.39% for the different leukocyte types. In addition to promoting auto-segmentation and differential classification, the proposed technique also contributes to the definition of new descriptors and the construction of an image database using various processes hematological staining