56 resultados para Infra-estruturas
em Universidade Federal do Rio Grande do Norte(UFRN)
Resumo:
The continuous advances in ceramic systems for crowns and bridges infrastructure getting researchers and manufacturers looking for a material that has good mechanical properties and aesthetic. The purpose of this study was to verify in which composition and sintering temperature the ceramic system for infrastructure composed of alumina and zirconia would have the best mechanical properties. With this objective we made in UFRN laboratories 45 test bodies in the form of rectangular bars with the following dimensions: 30mm x 8mm x 3mm, where we separated by the sintering temperature: 1200°C, 1300ºC and 1400ºC, and by comp osition: 33% Zirconia + 67% Alumina; 50% Zirconia + 50% Alumina and 25% Zirconia + 75% Alumina, these test bodies were not infiltrated with glass. Also, were made nine test bodies by a technical from a laboratory with a commercial ceramic system: in the Ceram Zircônia (Vita - Zahnfabrik) with the following dimensions: 20mm x 10mm x 0.5mm, these test bodies following all recommendations of the manufacturer and were infiltrated with glass. Were realized optical and electronic microscopy analyses, hardness testing, resistance to bending in three points, porosity and bulk density. After analysis of the results we verified that with the increasing of sintering temperature, increased the value of resistance to bending, but with the same temperature there was no significant difference between the different compositions, samples made with the commercial ceramic that were infiltrated, presented a resistance to bending six times greater than the samples sintered to 1400°C and which have not been infiltra ted. There was no significant difference between the values of apparent porosity for the samples made in UFRN laboratories, but the samples of commercial ceramic obtained 0% in porosity apparent value. In tests of Rockwell Hardness there is an increase in the value of Hardness, with the increase of sintering temperature for the samples not infiltrated. Samples infiltrated showed similar values as the samples sintered in 1400°C. There was no significant difference between the values of apparent density among samples manufactured in UFRN laboratories and samples made with a commercial ceramic
Resumo:
The continuous advances in ceramic systems for crowns and bridges infrastructure getting researchers and manufacturers looking for a material that has good mechanical properties and aesthetic. The purpose of this study was to verify in which composition and sintering temperature the ceramic system for infrastructure composed of alumina and zirconia would have the best mechanical properties. With this objective we made in UFRN laboratories 45 test bodies in the form of rectangular bars with the following dimensions: 30mm x 8mm x 3mm, where we separated by the sintering temperature: 1200°C, 1300ºC and 1400ºC, and by comp osition: 33% Zirconia + 67% Alumina; 50% Zirconia + 50% Alumina and 25% Zirconia + 75% Alumina, these test bodies were not infiltrated with glass. Also, were made nine test bodies by a technical from a laboratory with a commercial ceramic system: in the Ceram Zircônia (Vita - Zahnfabrik) with the following dimensions: 20mm x 10mm x 0.5mm, these test bodies following all recommendations of the manufacturer and were infiltrated with glass. Were realized optical and electronic microscopy analyses, hardness testing, resistance to bending in three points, porosity and bulk density. After analysis of the results we verified that with the increasing of sintering temperature, increased the value of resistance to bending, but with the same temperature there was no significant difference between the different compositions, samples made with the commercial ceramic that were infiltrated, presented a resistance to bending six times greater than the samples sintered to 1400°C and which have not been infiltra ted. There was no significant difference between the values of apparent porosity for the samples made in UFRN laboratories, but the samples of commercial ceramic obtained 0% in porosity apparent value. In tests of Rockwell Hardness there is an increase in the value of Hardness, with the increase of sintering temperature for the samples not infiltrated. Samples infiltrated showed similar values as the samples sintered in 1400°C. There was no significant difference between the values of apparent density among samples manufactured in UFRN laboratories and samples made with a commercial ceramic
Resumo:
Pervasive applications use context provision middleware support as infrastructures to provide context information. Typically, those applications use communication publish/subscribe to eliminate the direct coupling between components and to allow the selective information dissemination based in the interests of the communicating elements. The use of composite events mechanisms together with such middlewares to aggregate individual low level events, originating from of heterogeneous sources, in high level context information relevant for the application. CES (Composite Event System) is a composite events mechanism that works simultaneously in cooperation with several context provision middlewares. With that integration, applications use CES to subscribe to composite events and CES, in turn, subscribes to the primitive events in the appropriate underlying middlewares and notifies the applications when the composed events happen. Furthermore, CES offers a language with a group of operators for the definition of composite events that also allows context information sharing
Resumo:
The current debate on rural development focuses on the territorial approach, recognizing the multifunctional character of rural areas. Emphasize the use of endogenous forces, the need of implement policies which valorize local specificities, the participation of social actors in revitalization of rural areas. In this context tourism enters as a means to induce a new dynamic to rural areas, since the activity is regarded as a channel for the upgrading of the natural and cultural resources and the rural way of life. This study focuses on local-based tourism as a promoter of rural development, giving an analysis of the social reality and potential for this tourism in the district of Dondo. In it, is proposed to analyze the potential for development of local-based tourism in the district of Dondo, assessing the extent to which local reality enables the inclusion of the community in the management of local tourism resources. For this, was showed the inclusion of local-based tourism in the current context of rural development, was identified and organized systematically the factors that influence the implementation of local-based tourism in the study area and was verified as far as possible the study area corresponds to the constraints identified, showing how local-based tourism can best been encouraged. Was adopted a qualitative methodological approach to both the procedures and data processing, but also by critical approach, using bibliographical research, semi-structured interviews that fell on the group of public administrators who work in tourism and community leaders. The critical analysis was based on the principles of sustainability o Sachs particular ecological, social, cultural, economic, space, beyond the analysis of political and institutional aspects. The survey results show that the district of Dondo has a potential for implementing a model of tourism development on a local basis, since it is rich in natural and cultural research, benefits from good network accessibility in the context of the market in the region, the population live according to their habits and customs and value their identity. There is also a good cooperation between community members, although not in tourism, a fact which is observed through the lever of community participation in associations, cooperatives, working in areas such as agriculture, fishing, environment, civic education etc. It also has public funding sources to augment or stimulate local investment. Despite obstacles such as inexistence of policies and local plans for tourism development, lack of awareness of tourism, lack of basic infrastructure, as well as equipment and facilities to support tourism, the results shows that these problems can be solved through a public commitment from both government, and community through a joint planning and participation
Resumo:
The present research if inserts in the subject of the habitation of social interest and its relation with the sanitation infra-structure questions (sewer, water, draining and garbage). Having as study universe the narrow river of the Forty , situated one in the city of Manaus, capital of Amazon, approaches questions that if present between the necessities of housing and the especificidades of the natural environment, whose characteristics evidence limits for the implantation of adequate habitations. The objective is to analyze the possibilities and the limits of the urbanística regularization in the palafitas of the narrow rivers of Manaus, in view of the factors of habitability and ambient protection, expresses for the sanitation system - sanitary exhaustion, water supply, urban draining and garbage collection. The work approaches initially relative the conceptual aspects to the subject of social habitation in the country and its relation with the habitability factors, also focusing the question of the housing and the processes of urban informality in the city of Manaus. It deals with the process of constitution of the palafitas in the space of the city and its relation with the habitacionais politics, presenting the analysis of the implantation of the palafitas in relation to the sanitation infra-structure conditions (sewer, water, draining and garbage). As conclusion, it identifies to the possibilities and limits of urbanística regularization of the palafitas implanted to the long one of the narrow river of the Forty , taking in consideration the systems of the sanitation infrastructure
Resumo:
Protein and caloric malnutrition has been considered one of the most concerned endemic diseases in Brazil and in the world. It has been known that depletion or reduction of proteins as far as meals are concerned can steer irreversible damages upon several organic systems. This study had as aim evaluate the effects the low-protein diet had over the formation and composition of the teeth components. 18 females and 6 males were used for the experiment. 12 from the 18 females had undertaken the low-protein diet (DH) for 03 weeks and the other 6, which remained, and those males had undertaken a controlled diet (DC) for the same period. All animals had the diets during their mating, pregnancy and lactation cycle. As soon as the offsprings had been born, 10 young males and females of each group faced a disease hood analysis to check the teeth germs of their lower fore teeth. The rest of the group had their lactation cycle normally 60 days. Then they were put to death and had their lower fore teeth removed both to be analyzed through a scanning electronic microscopy (SEM) of the structure alterations and to have their calcium checked by an atomic absorption of the phosphorus vanadate-molibdate method and by other minerals EDX method. The animals livers were removed to have their hepatic proteins analyzed as well. The histopatologic study showed that at first day of birth, all animals had their lower fore teeth come out. It was verified that 90% of the animals teeth were in an apposition and calcification period and it was possible to observe the dentin formation from 60% of the 90% already mentioned. Through the SEM method it could be realized that 90% of the animals of the DH group had their lower fore teeth easily broken and no definite shape. In this same group itself, it was also observed long micro fissures 369,66 nm ± 3,45 while the DC group had fissures of 174 nm ± 5,72. Now regarding the calcium and phosphorus concentration, it could be noticed that there was a great reduction of these components and other minerals in the DH group. Almost all minerals, except for the Cl and K, presented higher levels in the DC group enamel.The reduction of the protein input greatly influenced the offsprings´ weight and height. However the hepatic proteins had no important difference between the groups what can make one believe that those animals suffered from protein malnutrition of marasmic kind
Resumo:
In this work we developed a computer simulation program for physics porous structures based on programming language C + + using a Geforce 9600 GT with the PhysX chip, originally developed for video games. With this tool, the ability of physical interaction between simulated objects is enlarged, allowing to simulate a porous structure, for example, reservoir rocks and structures with high density. The initial procedure for developing the simulation is the construction of porous cubic structure consisting of spheres with a single size and with varying sizes. In addition, structures can also be simulated with various volume fractions. The results presented are divided into two parts: first, the ball shall be deemed as solid grains, ie the matrix phase represents the porosity, the second, the spheres are considered as pores. In this case the matrix phase represents the solid phase. The simulations in both cases are the same, but the simulated structures are intrinsically different. To validate the results presented by the program, simulations were performed by varying the amount of grain, the grain size distribution and void fraction in the structure. All results showed statistically reliable and consistent with those presented in the literature. The mean values and distributions of stereological parameters measured, such as intercept linear section of perimeter area, sectional area and mean free path are in agreement with the results obtained in the literature for the structures simulated. The results may help the understanding of real structures.
Resumo:
This work focuses on the creation and applications of a dynamic simulation software in order to study the hard metal structure (WC-Co). The technological ground used to increase the GPU hardware capacity was Geforce 9600 GT along with the PhysX chip created to make games more realistic. The software simulates the three-dimensional carbide structure to the shape of a cubic box where tungsten carbide (WC) are modeled as triangular prisms and truncated triangular prisms. The program was proven effective regarding checking testes, ranging from calculations of parameter measures such as the capacity to increase the number of particles simulated dynamically. It was possible to make an investigation of both the mean parameters and distributions stereological parameters used to characterize the carbide structure through cutting plans. Grounded on the cutting plans concerning the analyzed structures, we have investigated the linear intercepts, the intercepts to the area, and the perimeter section of the intercepted grains as well as the binder phase to the structure by calculating the mean value and distribution of the free path. As literature shows almost consensually that the distribution of the linear intercepts is lognormal, this suggests that the grain distribution is also lognormal. Thus, a routine was developed regarding the program which made possible a more detailed research on this issue. We have observed that it is possible, under certain values for the parameters which define the shape and size of the Prismatic grain to find out the distribution to the linear intercepts that approach the lognormal shape. Regarding a number of developed simulations, we have observed that the distribution curves of the linear and area intercepts as well as the perimeter section are consistent with studies on static computer simulation to these parameters.
Resumo:
Thin commercial aluminum electrolytic and passed through reactions was obtained with anodic alumina membranes nanopores. These materials have applications in areas recognized electronic, biomedical, chemical and biological weapons, especially in obtaining nanostructures using these membranes as a substrate or template for processing nanowires, nanodots and nanofibers for applications noble. Previous studies showed that the membranes that have undergone heat treatment temperature to 1300° C underwent changes in morphology, crystal structure and optical properties. This aim, this thesis, a study of the heat treatment of porous anodic alumina membranes, in order to obtain and to characterize the behavior changes structures during the crystallization process of the membranes, at temperatures ranging between 300 and 1700° C. It was therefore necessary to mount a system formed by a tubular furnace resistive alumina tube and controlled environment, applying flux with special blend of Ag-87% and 13% N2, in which argon had the role of carrying out the oxygen nitrogen system and induce the closing of the pores during the densification of the membrane. The duration of heat treatment ranged from 60 to 15 minutes, at temperatures from 300 to 1700° C respectively. With the heat treatment occurred: a drastic reduction of porosity, grain growth and increased translucency of the membrane. For the characterization of the membranes were analyzed properties: Physical - thermogravimetric, X-ray diffraction, BET surface area; morphological - SEM, EDS through compositional and, optical absorbance, and transmittance in the UV-VIS, and FTIR. The results using the SEM showed that crystallization has occurred, densification and significant changes in membrane structure, as well as obtaining microtube, the BET analysis showed a decrease in specific surface area of the membranes has to 44.381 m2.g-1 to less than 1.8 m2.g-1 and in the analysis of transmittance and absorbance was found a value of 16.5% in the range of 800 nm, characteristic of the near infrared and FTIR have confirmed the molecular groups of the material. Thus, one can say that the membranes were mixed characteristics and properties which qualify for use in gas filtration system, as well as applications in the range of optical wavelength of the infra-red, and as a substrate of nanomaterials. This requires the continuation and deepening of additional study
Resumo:
Since minetics The economics and political promotion along the necessity of flexibility in states actions admited actors partipction and social controlo on process of construction in local development. The Programa Nacional de Fortalecimento à Agricultura Familiar (PRONAF) by this framework consists suprass the specific points about contry world in order to embrace territorial dimension of development, focalizing actions that estimulate co-operative pratices among local agents. This work proposal intends to identify advances and regression of PRONAF Infra-estrutura (Framework) by one territorial pact organization considering its administration about mechamisms on advantage conmflicts between distinct actor and their ables to atimulates a construction of new relationships between governors and population. Undderstanding PRONAF action like a process that come from its instrumental proportion surpass looking for substantial elements constructionm on intervention of local development considering administration mechamisms in São Paulo do Potengi (RN) city-council-starting by Conselho Municipal de Desenvolvimento Rural as well changes of institutional arrangement with território da Borborema erection. Throngh documental studies, bibliography researches and interviews we indenttfy an articulante power of Territorial pact partnerships like one of these political process and its sector character as their limits
Resumo:
The Federal Constitution of 1988, when taking care of the economical order, denotes special concern in the abuses of the economical power and the disloyal competition. The mark to mediate of all this is, in fact, the defense and the consumer's protection, once this is final addressee of whatever if it puts at the consumption market. The coming of the Law 8.078/90, Code of Protection and Defense of the Consumer, inaugurates a time of effective concern with the homogeneous individual interests originating from of the consumption relationships. In this point, the focus of main to face of the present work lives, in other words, the protection of the right to the individual property, especially manifests in the exercise of the trade freedom that keeps direct relationship with the respective social function the one that is destined. The code of the consumer's defense doesn't just take care of this, but also of the other star of the relationships of the consumption. When affirming in the interruption VI of the art. 4th that the national politics of those relationships, finds ballast in the prohibition and repression efficient of all of the abuses committed in the consumption relationships, keeping inherent relationship-causality in the economical order, sculpted for the article 170 in the Constitution of 1988. In the generic plan, the mark of the present work is to question concerning the limits of the trade freedom and previsible collisions with protection norms and the consumer's defense, as well as factual convergences of those small systems, especially in what he/she refers to the innate interests to the suppliers. In the specific plan, we aspirated to identify the protection device-commands to the actors of the trade relationship, capable to guarantee the free competition in a global economy of market, seeking especially the Well-being, for soon afterwards, in an analytical perspective, to discover the possible applications that it holds the Federal Constitution, in headquarters of economical freedoms. It was observed that the consumer today doesn't need only of laws that their needs, fruit of the vulnerability that it is him/her meditate innate. He/she lacks, yes, of effective mechanisms that prevent lesions that can be them impinged by the suppliers at the time in that you/they are useful to repair the damages when happened, punishing the author of the damage
Resumo:
In the middle of modern social changes produced by globalization and capitalism, several markets have changed. States have left the direct coordination of these markets (chiefly public utility sector in the form of monopolies), introducing regulation in order to promote competition. These changes have affected natural gas industry by promoting competition as a key factor to the development and the increase of firms in this market. The regulatory reform of natural gas industry ocurred in EUA and Europe Union and it has produced its first results. In Brazilian context, Constitutional Amendment nbr. 09 and Federal Law nbr. 9.478/97 ( Petroleum Law ) opened the natural gas market to a broad range of private economic agents and they finished the monopoly over the industry before managed by Petrobras. The new regulatory framework of Brazilian natural gas industry has designed competition as a central element to the new form of managment of business and contractual relationships of this industry. Among the regulatory instruments, open access regulation in natural gas pipelines is directed to promote competition. The questions arised about its implementation in Brazilian context are studied in the present work, in which it is discussed the constitutional rules and principles are to be applied to the open access regulation within the theme of statal regulation of economy present in constitutional economic order
Resumo:
This thesis is a result of a research on Natal/RN as a tourist destination. We understand that cities are chosen as tourist destinations beyond its cartographic localization, from other dimensions of meanings that, in its set, constitute images. These images are, probably, very different of the images constructed by native and resident populations, who possess relations of identity with the place. The knowledge of the meanings that others attribute to this city as tourist destination, bring us near to the symbolic bonds established by individuals or social groups on the act of their choices, as well as bring us near to the interaction process city-tourists where the expectations are confirmed or not. The images divulgated by the media also participate of the complex formation of the tourist image that is being constructed and available for the different public, in different social contexts. The tourism constitutes a symbolic asset of the modern society, being considered by the studious, as one of the most expressive phenomena of the modernity, for involving each year displacement and the interaction of thousand of people of different cultures in the entire world. All this people s mobilization points to practical social related to personal motivations, to the entailed desired to the idea to travel and to exceed borders. It is already consensus that tourism is a phenomenon of economic growth, generating jobs, income, professional, qualification, bringing improvements for the host cities. Since 1995, in Brazil, the tourism as a sector of the economy, passed to be considered one of the national priorities, and in this perspective, the national politics of the tourism invested in infrastructure of Brazilian cities with high tourist potential, objecting to increase the flows of Brazilian and foreign tourists. Owing to this fact, the country still invests in programs of tourist marketing, mainly divulging the images of the natural beauties of Brazil abroad. And for Brazilians, the campaigns appeal to rescue the feeling to be Brazilian, associating the idea to travel and know its country. Natal city possesses an excellent positioning in the tourist marketing, being predominantly divulgated in national and international level, for its naturalistic singularity, where the images of its natural enchantments as warm water beaches, white dunes, warm weather, constant breeze and an always blue sky are shown as the favorite scene on this city. From what was viewed above that the choice of a tourist destination articulates from a determined imaginary of a place, already constructed or in process of construction, we consider the knowledge of this imaginary a basic learning for the population of the city and especially, for educators, in the formation of professionals in this area and for tourism managers, elaborators of public politics. Based on this estimative, we developed this research that had as a general objective to identify the images that illustrate Natal city as a tourist destination - our objective of study, particularly the meanings and senses attributed by the tourist marketing (hotel s folders) and by the tourists that visited the city during this study. The discussions and reflections that had guided this research had been given from the theoretical link between imaginary and social representation, also considering some interfaces between the fields of communication and symbol. From the studied authors, Baczko (1985) clarifies that the study of social imaginary is directed for the mechanisms and structures of the social life, especially for the intervention accomplishes and efficient of the representations and symbols in the practical collectives, as well as in its direction and orientation . Following this same thought, Moscovici (1978) says that the social representation are produced in communicational and symbolic contexts, and these representations once that already constituted circulate socially as almost tangible entities. Based on this fundament and on the analyze of Barthes (1990), particularly in the approach given to the reading of photographic image, we could observe on hotel s folders that each page evidences senses and meanings of functionality of internal and external spaces, pointing to the way of leisure offered by the keepers of city which is the hotels. About, the leisure that they offer, it is directed to young public, giving meaning to the young myth of personalized leisure tourism on children, young and adults images. The image about security that hotels offer and the singular image of Natal city as a paradise place, provide an idealization of pleasure through the sun, dunes, and beaches and also due to the hospitability of the natives who are assigned as educated . For the tourist that participated on this research, Natal city is tied only by the imaginary of leisure and nature which constitute the emotional link of the relation media-city-tourist. And with such force and fullness of directions the city discloses without tensions and contradictions as a place protected by a mythical and sacred aura. The study also demonstrates us that the potiguar culture remains (almost) forgotten, due to the silenced in this imaginary. In this perspective, we highlight that this culture silence is very close related to the disvalue of education in its general meaning. We defend that the imaginary apprehended constitutes a new reading and a new looking and understanding the tourist reality that comes historically consolidating in this city. In this direction, we glimpse that this study and its future dismemberments can collaborate with the process of rescue the cultural values of the potiguar people, in the way that the meaning of tourist may be redefined, and the tourist image of the city can be also disclosed for its identities particularities of its culture
Resumo:
A numerical study on the behavior of tied-back retaining walls in sand, using the finite element method (FEM) is presented. The analyses were performed using the software Plaxis 2D, and were focused on the development of horizontal displacements, horizontal stresses, shear forces and bending moments in the structure during the construction process. Emphasis was placed on the evaluation of wall embedment, tie-back horizontal spacing, wall thickness, and free anchor length on wall behavior. A representative soil profile of a specific region at the City of Natal, Brazil, was used in the numerical analyses. New facilities built on this region often include retaining structures of the same type studied herein. Soil behavior was modeled using the Mohr-Coulomb constitutive model, whereas the structural elements were modeled using the linear elastic model. Shear strength parameters of the soil layers were obtained from direct shear test results conducted with samples collected at the studied site. Deformation parameters were obtained from empirical correlations from SPT test results carried out on the studied site. The results of the numerical analyses revealed that the effect of wall embedment on the investigated parameters is virtually negligible. Conversely, the tie-back horizontal spacing plays an important role on the investigated parameters. The results also demonstrated that the wall thickness significantly affects the wall horizontal displacements, and the shear forces and bending moments within the retaining structure. However, wall thickness was not found to influence horizontal stresses in the structure
Resumo:
The present work deals with the linear analysis of bi-dimensional axisymmetric structures, through development and implementation of a Finite Element Method code. The structures are initially studied alone and afterwards compatibilized into coupled structures, that is, assemblages, including tanks and pressure vessels. Examples are analysed and, in order to prove accuracy, the results were compared with those furnished by the analytical solutions