Adsorção de Pb(II) utilizando adsorvente composto por montmorilonita e dolomita

The destructive impact of improper disposal of heavy metals in the environment increases as a direct result of population explosion, urbanization and industrial expansion and technological developments. Argil are potential materials for adsorption of inorganic and the pelletization of it is required for use in adsorptive columns of fixed bed. The low cost and the possibility of regeneration makes these materials attractive for use in the purification process, capable of removing inorganic compounds in contaminated aquatic environments. In this work was made pellets of a mixture of dolomite and montmorillonite by wet agglomeration, in different percentages. The removal of Pb (II) was investigated through experimental studies, and was modeled by kinetic models and isotherms of adsorption. The materials were characterized using the techniques of XRD, TG / DTA, FT-IR, and surface area by BET method. The results showed the adsorption efficiency of the contaminant by the composite material studied in synthetic solution. The study found that the adsorption follows the Langmuir model, and the kinetics of adsorption follows the model of pseudosecond order

Estudo da molhabilidade de ligas de adição à base de prata sobre insertos cerâmicos para aplicação em brocas perfuração de poços de petróleo

Metal-ceramic interfaces are present in tricone drill bits with hard ceramic inserts for oil well drilling operations. The combination of actions of cutting, crushing and breaking up of rocks results in the degradation of tricone drill bits by wear, total or partial rupture of the drill bit body or the ceramic inserts, thermal shock and corrosion. Also the improper pressfitting of the ceramic inserts on the bit body may cause its total detachment, and promote serious damages to the drill bit. The improvement on the production process of metal-ceramic interfaces can eliminate or minimize some of above-mentioned failures presented in tricone drill bits, optimizing their lifetime and so reducing drilling metric cost. Brazing is a widely established technique to join metal-ceramic materials, and may be an excellent alternative to the common mechanical press fitting process of hard ceramic inserts on the steel bit body for tricone drill bit. Wetting phenomena plays an essential role in the production of metal/ceramic interfaces when a liquid phase is present in the process. In this work, 72Silver-28Copper eutectic based brazing alloys were melted onto zirconia, silicon nitride and tungsten carbide/Co substrates under high vacuum. Contact angle evolution was measured and graphically plotted, and the interfaces produced were analysed by SEM-EDX. The AgCu eutectic alloy did not wet any ceramic substrates, showing high contact angles, and so without chemical interaction between the materials. Better results were found for the systemns containing 3%wt of titanium in the AgCu alloy. The presence os titanium as a solute in the alloy produces wettable cand termodinamically stable compounds, increasing the ceramics wetting beahviour

Estudo da influência da temperatura de brasagem nas uniões zircônia/aço inox 304 utilizando metalização mecânica

Metal-Ceramic (M/C) Zirconia-stainless steel interfaces have been processed through brazing techniques due to the excellent combination of properties such as high temperature stability, high corrosion resistance and good mechanical properties. However, some M/C interfaces show some defects, like porosity and cracks results in the degradation of the interfaces, leading even to its total rupture. Most of time, those defects are associated with an improper brazing parameters selection to the M/C system. In this work, ZrO2 Y-TZP and ZrO2 Mg - PSZ were joint with the stainless steel grade 304 by brazing using a eutectic silver-copper (Ag28Cu) interlayer alloy with different thermal cycles. Ceramic surfaces were previous mechanically metallized with titanium to improve adhesion of the system. The effect of temperature on the M/C interface was studied. SEM-EDS and 3 point flexural bend test were performed to evaluate morphology, chemical composition and mechanical resistance of the M/C interfaces. Lower thermal cycle temperatures produced better results of mechanical resistance, and more regular/ homogeneous reaction layers between braze alloy and metal-ceramic surfaces. Also was proved the AgCu braze alloy activation in situ by titanium

A função social do contrato como concretização de direitos fundamentais nas relações privadas

This dissertation deals with the social function of the contract, based on constitutional principles, especially those relating to fundamental rights. The social function of the contract (general clause) is described in the Civil Code so intentionally generic, no precise criteria to define it. Because of the fluidity of this principle, it is justified its closer study, seeking to assess its various meanings and looking away from the legal uncertainty that an unlimited conceptual vagueness can cause. The social function of the contract arises from a transformation experienced in private law from the inflows received from the Constitutional Law, the result of an evolutionary process by which it became the state structure, leaving the foundations of the classical liberal state and moving toward a vision guided by existential human values that give the keynote of the Welfare State. Arose, then the concern about the effectiveness of fundamental rights in relations between individuals, which is studied from the inapplicability of fundamental rights in private relations (U.S. doctrine of State action), passing to the analysis of the Theory of indirect horizontal effect of fundamental rights (of German creation and majority acceptance), reaching the right horizontal efficacy Theory of fundamental rights, prevailing Brazilian doctrine and jurisprudence. It has also been investigated the foundations of the social contract, pointing out that, apart from the provisions of the constitutional legislation, that base the principle on screen, there have also been noticed foundations in the Federal Constitution, in devices like the art. 1, III, the dignity of the human person is the north of the relationship between contractors. Also art. 3rd, I CF/88 bases the vision of social covenants, equipping it for the implementation of social solidarity, as one of the fundamental objectives of the Republic. Still on art. 170 of the Constitution it is seen as a locus of reasoning in the social function of the contract, the maintenance of the economic order. It is also studied the internal and external aspects of the social function of the contract, being the first part the one that considers the requirement of respect for contractual loyalty, through the objective good faith, as a result of the dignity of the hirer may not be offended by the other through the contract. On the other hand, the external facet of the social function of the contract, in line with the constitutional mandate of solidarity, indicates the need for contractors to respect the rights of society, namely the diffuse, collective and individual third party. In this external appearance, it is also pointed the notion of external credit protection, addressing the duty of society to respect the contract. There has been shown some notions of the social contract in comparative law. Then, there has been investigated the content of principle study, through their interrelationships with other provisions of private and constitutional law, namely equality, objective good faith, private autonomy and dignity of the human person. We study the application of the social contract in contractual networks as well as the guidance of conservation of contracts, especially those denominated long-term captive contracts, considering the theory of substantive due performance, concluding with an analysis of the social contract in code of Consumer Protection

Segurança do paciente no sistema de medicação: análise de enfermeiros de um hospital de ensino

This study aimed to identify and describe the factors related to Patient Safety in a medication system according to the nurses analysis in a teaching hospital from the photographic analysis method. This was a cross-sectional, descriptive study with mixed approach in a teaching hospital in Rio Grande do Norte. The population consisted of 42 nurses from inpatient units, of which 34 composed the study sample. As eligibility criteria, we defined nurses from public service and nurses who agreed to participate. Ethical determinations were observed, the study was submitted to the Ethics and Research of the University Hospital Onofre Lopes, obtaining the assent with ethical assessment certificate (CAAE 0098.0.051.294-11). For data collection, we used the photographic method (Photographic Analysis Technique) by Patricia Marck (Canada). It was developed in two phases: at first, we randomly captured photos from the medication system, resulting in 282 images; then we selected/processed the photographs, which were reduced to 10 images in Microsoft Excel 2010; in the second phase, the nurses answered the questionnaire divided into socio-professional profile and Digital Photography Scoring Tool (questions a and b ). For analysis of the question a , we used the content analysis technique, and for b , we used the Statistical Package for the Social Sciences 20.0 (temporary license). The socio-professional profile revealed the predominance of females; age group 34-43 years; professionals with specialization; 10-18 years of length of service; and nurses working exclusively in the hospital and who know the Patient Safety. The photographic analysis in relation to Patient Safety resulted in specific categories for each stage of the medication system. Regarding disposal, we identified Proper verification ; Improper verification ; Correct identification ; Disposal in single doses ; and Improper Environment , with predominance of that last category. As for storage: Proper storage ; Improper storage ; Risk of exchange/disappearance ; and Poor hygiene , with special reference to improper storage. In preparation: Risk of exchanging medication/patient ; Inappropriate physical space ; and Inadequate 9 preparation of controlled drugs , highlighting the first category. In drug administration: Lack of Personal Protective Equipment ; Use of Personal Protective Equipment ; Improper administration technique ; Proper administration technique ; Correct drug identification ; Incorrect drug identification ; and Peripheral venous access without identification . From the safety assessment of 10 photographs, by adapting the scores (1-10) to the Likert Scale, we identified three Totally Unsafe (Level 1), three Unsafe (Level 2), three Partially Safe (Level 3), one Safe (Level 4), and no photograph considered Totally Safe. This study identified the prevalence of unsafety in the medication system in the nurses opinion. We were also able to understand that, although nurses identify safety aspects, the most prevalent categories characterize an unsafe assessment. Nursing needs to reflect on its practice, identifying gaps in the medication system in order to achieve a proper and safe care

Utilização do éster de soja como biolubrificante

The lubricants found in the market are of mineral or synthetic origin and harm to humans and the environment, mainly due to their improper discard. Therefore industries are seeking to develop products that cause less environmental impact, so to decrease mainly, operator aggression the Cutting Fluids became an emulsion of oil / water or water / oil. However, the emulsion was not considered the most suitable solution for environmental question, therefore the search for biodegradable lubricants and which no are toxic continues and so vegetable oils are seen, again, as a basis for the production of lubricants. The biggest problem with these oils is their oxidative instability that is intensified when working at high temperatures. The process transesterification decreases the oxidation, however changes some physical and chemical properties. Therefore soybean oil after the transesterification process was subjected to tests of density, dynamic viscosity, kinematic viscosity which is calculated from two parameters mentioned, flash point and acidity. Besides the physico-chemical test the soybean oil was subjected to a dynamic test in a tribometer adapted from a table vise, whose induced wear was the adhesive and ultimately was used as cutting fluid in a process of turning in two different materials, steel 1045 and cast iron. This latter test presented results below the mineral cutting fluid which it was compared in all tests, already in other experiments the result was satisfactory and other experiments not, so that chemical additives can be added to the oil analyzed to try equate all parameters and so formulate a biolubrificante not toxic to apply in machining processes of metalworking industry

Remoção de nitrogênio em biofiltros aerado e anóxico, com alto índice de vazios e sem remoção de lodo

The improper disposal of nitrogen in receiving water courses causes problems such as toxicity to living beings through the consumption of oxygen to meet the nitrogen demand, eutrophication and nitrate contamination of aquifers. For this reason it is often necessary to be carried out complementary treatment of wastewater to eliminate or reduce the concentration of this compound in the wastewater. The objective of this study is to evaluate the biological removal of nitrogen compounds using submerged aerated and anoxic filters as post-treatment of an anaerobic system, with low cost and innovative technology, which in previous studies has shown high removal efficiency of organic matter and great potential biological nitrogen compounds removal. The simple design with perforated hoses for air distribution and filling with plastic parts proved to be very efficient in relation to organic matter removal and nitrification. The system presented, in the best stage, efficiency in converting ammonia to nitrate by 71%, and produced a final effluent concentration below 10 mg / L of NH3-N. In addition, carbon concentration was removed by 77%, producing final effluent with 24 mg/L COD. However, denitrification in anoxic filter was not effective even with the addition of an external carbon source. There was a reduction of up to 56% of nitrogen caused by the process of simultaneous nitrification and denitrification (SND). The high voids space presented by this type of support material coupled with direct aeration of the sludge, allows the respiration of biomass retained between the endogenous phase, increased cell retention time and sludge retention capacity, producing a final effluent with turbidity less than 5 UT and total suspended solids around 5.0 mg/L

Avaliação da disponibilidade hídrica e da demanda hídrica no trecho do Rio Piranhas-Açu entre os açudes Coremas-mãe D´água e Armando Ribeiro Gonçalves

Piranhas-Açu basin is a Federal watershed with a drainage area of 43.681,5 km2, sited at Brazilian northeast semi arid, with 60% of your area in Paraiba State and 40% in Rio Grande do Norte State. The main river, Piranhas-Açu, has strategic importance for development of these states, because it s an essential source for many socio-economics activities developed along watercourse. The river s reach between Coremas-Mãe D`água Dam and Armando Ribeiro Gonçalves Dam has many irrigation projects, and supply many riverside cities. All this activities practiced in this river s reach consumes high water volumes. Due the importance of this stream and the necessity of an adequate management, this work aims for an impartial and detailed evaluation of real water supply conditions in this river s reach, by the application of hydrological modeling, including the arrangement of main dams in tributaries, and storage reservoir water balance. The rainfall-discharge model s applied in each sub-basins it was selected the model MODHISA- Hydrological Model of Semi Arid, that is a concentrated model with easy application. The simulation produced 50 years of inflows into the reservoirs, for which, were constructed the guaranties curves; and produced 50 years of synthetic discharge data in relevant points on the river and on its affluents; so it was constructed the permanence curves. Confronting the available discharge with the current and futures volumes of raw water captured in this river s reach, it was verified that de demands have high guaranties. This work concluded that the MODHISA Model is suitable to reproduce the hydrologic characteristics of Piranhas-Açu sub-basins, and showing good results

Eficiência de extração de cobre e níquel utilizando sistemas microemulsionados bifásicos e trifásicos

The environmental impact due to the improper disposal of metal-bearing industrial effluents imposes the need of wastewater treatment, since heavy metals are nonbiodegradable and hazardous substances that may cause undesirable effects to humans and the environment. The use of microemulsion systems for the extraction of metal ions from wastewaters is effective when it occurs in a Winsor II (WII) domain, where a microemulsion phase is in equilibrium with an aqueous phase in excess. However, the microemulsion phase formed in this system has a higher amount of active matter when compared to a WIII system (microemulsion in equilibrium with aqueous and oil phases both in excess). This was the reason to develop a comparative study to evaluate the efficiency of two-phases and three-phases microemulsion systems (WII and WIII) in the extraction of Cu+2 and Ni+2 from aqueous solutions. The systems were composed by: saponified coconut oil (SCO) as surfactant, n-Butanol as cosurfactant, kerosene as oil phase, and synthetic solutions of CuSO4.5H2O and NiSO4.6H2O, with 2 wt.% NaCl, as aqueous phase. Pseudoternary phase diagrams were obtained and the systems were characterized by using surface tension measurements, particle size determination and scanning electron microscopy (SEM). The concentrations of metal ions before and after extraction were determined by atomic absorption spectrometry. The extraction study of Cu+2 and Ni+2 in the WIII domain contributed to a better understanding of microemulsion extraction, elucidating the various behaviors presented in the literature for these systems. Furthermore, since WIII systems presented high extraction efficiencies, similar to the ones presented by Winsor II systems, they represented an economic and technological advantage in heavy metal extraction due to a small amount of surfactant and cosurfactant used in the process and also due to the formation of a reduced volume of aqueous phase, with high concentration of metal. Considering the reextraction process, it was observed that WIII system is more effective because it is performed in the oil phase, unlike reextraction in WII, which is performed in the aqueous phase. The presence of the metalsurfactant complex in the oil phase makes possible to regenerate only the surfactant present in the organic phase, and not all the surfactant in the process, as in WII system. This fact allows the reuse of the microemulsion phase in a new extraction process, reducing the costs with surfactant regeneration

Geração automática de hardware a partir de especificações formais: estendendo uma abordagem de tradução

Removing inconsistencies in a project is a less expensive activity when done in the early steps of design. The use of formal methods improves the understanding of systems. They have various techniques such as formal specification and verification to identify these problems in the initial stages of a project. However, the transformation from a formal specification into a programming language is a non-trivial task and error prone, specially when done manually. The aid of tools at this stage can bring great benefits to the final product to be developed. This paper proposes the extension of a tool whose focus is the automatic translation of specifications written in CSPM into Handel-C. CSP is a formal description language suitable for concurrent systems, and CSPM is the notation used in tools support. Handel-C is a programming language whose result can be compiled directly into FPGA s. Our extension increases the number of CSPM operators accepted by the tool, allowing the user to define local processes, to rename channels in a process and to use Boolean guards on external choices. In addition, we also propose the implementation of a communication protocol that eliminates some restrictions on parallel composition of processes in the translation into Handel-C, allowing communication in a same channel between multiple processes to be mapped in a consistent manner and that improper communication in a channel does not ocurr in the generated code, ie, communications that are not allowed in the system specification

Viabilidade da cultura Cnidoscolus quercifolius POHL para produção de Biodiesel no semiárido nordestino

The northeastern semiarid is a region that presents a serious picture stagnation or slowness of the economic growth, beyond the presence of social pointers below of the averages national and regional. The half-dryness conditions become the improper region for many agricultural cultures, what it affects the local populations directly, as well as the economy that is based mainly on agriculture. Cnidoscolus quercifolius Pohl, popularly know as favelone is a native species of the semiarid region that withholds great potential for the development of the region in virtue of its multiple uses. Being an oleaginous, its production in familiar farmings makes with that biodiesel either for the misery an important alternative eradication for the possibility of occupation of enormous contingents of people. The present study it aims at to evaluate the germination of the faveleira without thorns under conditions of water and saline stresses, main stresses which the vegetal species of the semiarid one are submitted; beyond verifying the acceptance of the species for agriculturists of a cooperative in the city of Apodi/RN. The methodology used for germination corresponds to using treatments with polyethylene glycol and sodium chloride to assess water and salt stress respectively, being held in rolo. O system approach used for the verification of acceptance of faveleira was the use of interview with farmers cooperative in the study area determined. In this direction it was verified that the faveleira is a resistant species the conditions of drought and salinity of the ground, factor of great relevance, since one is about a species with high added value, making possible the development for the semiarid region. It was verified that the agriculturists are favorable the introduction of the faveleira and reveal receptive the idea to cultivate a species with potential for production of biodiesel

Detecção de áreas degradadas na sub-bacia hidrográfica do rio taperoá/pb, utilizando parâmetros físicos dos sensores modis/terra e tm/landsat

This study includes the results of the analysis of areas susceptible to degradation by remote sensing in semi-arid region, which is a matter of concern and affects the whole population and the catalyst of this process occurs by the deforestation of the savanna and improper practices by the use of soil. The objective of this research is to use biophysical parameters of the MODIS / Terra and images TM/Landsat-5 to determine areas susceptible to degradation in semi-arid Paraiba. The study area is located in the central interior of Paraíba, in the sub-basin of the River Taperoá, with average annual rainfall below 400 mm and average annual temperature of 28 ° C. To draw up the map of vegetation were used TM/Landsat-5 images, specifically, the composition 5R4G3B colored, commonly used for mapping land use. This map was produced by unsupervised classification by maximum likelihood. The legend corresponds to the following targets: savanna vegetation sparse and dense, riparian vegetation and exposed soil. The biophysical parameters used in the MODIS were emissivity, albedo and vegetation index for NDVI (NDVI). The GIS computer programs used were Modis Reprojections Tools and System Information Processing Georeferenced (SPRING), which was set up and worked the bank of information from sensors MODIS and TM and ArcGIS software for making maps more customizable. Initially, we evaluated the behavior of the vegetation emissivity by adapting equation Bastiaanssen on NDVI for spatialize emissivity and observe changes during the year 2006. The albedo was used to view your percentage of increase in the periods December 2003 and 2004. The image sensor of Landsat TM were used for the month of December 2005, according to the availability of images and in periods of low emissivity. For these applications were made in language programs for GIS Algebraic Space (LEGAL), which is a routine programming SPRING, which allows you to perform various types of algebras of spatial data and maps. For the detection of areas susceptible to environmental degradation took into account the behavior of the emissivity of the savanna that showed seasonal coinciding with the rainy season, reaching a maximum emissivity in the months April to July and in the remaining months of a low emissivity . With the images of the albedo of December 2003 and 2004, it was verified the percentage increase, which allowed the generation of two distinct classes: areas with increased variation percentage of 1 to 11.6% and the percentage change in areas with less than 1 % albedo. It was then possible to generate the map of susceptibility to environmental degradation, with the intersection of the class of exposed soil with varying percentage of the albedo, resulting in classes susceptibility to environmental degradation

As praças públicas de Natal/RN no âmbito dos problemas socioambientais urbanos

This paper presents the public square as a subsystem of the city for the potential integration of elements 'natural' and built environment. But sometimes the suitability of projects and the social processes involved are not compatible and favorable to their real functions in urban space. The city of Natal, with a population of 803,739 inhabitants has 253 public parks not uniformly distributed in the urban area, but mostly in central areas and their absence in some peripheral neighborhoods. In this sense, the objective of this paper is to analyze the quality and spatiality of the city's public squares within the urban socio-environmental problems. For this, use of simple random sampling to define the sample and the proportional allocation of districts, totaling 168 squares to be raised. We prepared a form to collect data on the field that includes aspects of leisure, infrastructure and environment. For each square sampled was calculated Square Quality Index (PQI), then calculating the average per IQP neighborhood. The rates found were crossed with census data and Municipal Public Administration by neighborhood, using multivariate analysis. We generated maps, charts and tables, considered appropriate to each question format, focused comparison. The public square appears as an indicator of environmental challenges present in intra-urban spaces of the city. Their spatial distribution is not consistent demand population, both by disposition and by how much. In terms of quality are characterized by different levels of inadequacy and degradation aspects of leisure, environmental and infrastructure, often causing disfigurement, abandonment and improper occupation in such spaces. Multivariate analysis point to a central concentration and their problems in certain administrative units, not only as regards the public squares, but also to aspects of education, income, and other violence, perpetuating the problem. The various levels of inadequacy and degradation of public squares have been more blatant in the poorest neighborhoods of the city, pointing to a structural pattern associated with the intrinsic characteristics of the neighborhood and the socioeconomic profile of the local population. These are problems of social and environmental dimensions, threaded in and influenced the political, economic and broader social process of transformation of the city and the urban. Based on an uneven process in which space necessarily reflect the contradictions inherent in the active forces and interests. Thus evidencing the importance of managing the necessary public effectively engaged with the problems that are present there, in order to equate them, without being prioritized certain areas of the city at the expense of others

Zoneamento ambiental do Município de Aquiraz-CE

The Metropolitan Region of Fortaleza (RMF) is composed by thirteen cities, where is call the attention of Aquiraz. The city has a excellent resort area and a big importance in socioculture and historics aspects. It was one of the first village of Ceará, and it was founded in 1699, with was also the capital of the state until 1726. The urban local development has been disorganized in the last decades, the fact is, insert of turismon in its coast, and it is unable with alow capacity of the natural suppots, configuring unsustainable and et environment ambience. Considering as a turistic region, it is preoccupy, been necessart to create a better control of the nature of the region by the users. The environmental zoning in this work it is to plan of adequate form the use of the ground based in the management of the interests and the social and economic necessities in accord with the preservation of the environment and the natural characteristics of the city. The same is one great instrument planning where use to be analized in differents ways: social, ambiental, economical and institucional, and promove alternatives of use and occupation of the land to recreate the city. The methodo used to get the real objective, englobed zonal maps in ambiental unities and others themes (geologic/geomorphologic) since than the images from satelities LANDSAT and SPOT and fotografies under position of maps, secundaries listes gets in publics department, bibliographie, informations by the local populations. This prociduries mede easy to create maps, geologic/geomorphologic, of use and occupation the earth and the environmental zoning to analize the dynamic and the working of each ambiental unity of the city Aquiraz wich is located by map of this job. As a result of this job was confectionated the environmental zoning map of Aquiraz wich was divided in five ambiental unities and restrictions areas of occupation: unit I Littoral Plain (zoning with serious restrictions to the occupation); unit II Sub-Littoral Plain (improper zoning to the occupation); unit III between tray zoning Pré-Littoral and Peripheral Depression (improper zoning to the occupation); unit IV Strativism reserve of the plug (zoning used more under control in its occupation) and unit V Fluvial Plain Localities of the Indians Jenipapo-Kaninde/ locality Quilombolas (zoning used more without official regulation). With proposal in the ambient units above one expects that it has a reduction of the ambient degradation and protection of the local biodiversity of the city of Aquiraz in the State of the Ceará

Uma abordagem ergonômica para análise da qualidade do pescado, desde sua captura ao seu desembarque na praia, resultante da atividade dos jangadeiros de Ponta Negra - Natal/RN

The artisan fishing activity, which involves historical - cultural, environmental, social, political, economi c, among other factors, presents, nowadays, as an important source of income, creating jobs and food, contributing to the permanence of man in their own birthplace. However, the fish, considered one of the most perishable foods, requires a proper handling and conservation, from capture to its availability in the market, in order to slow the deterioration process. Thereby, this dissertation aims to study the effect of the manipulation practices on fish quality, from capture to its landing on the beach, resul ting from fisherman’s activity from Ponta Negra - Natal/RN. It also presents the purpose of analyzing the quality of the fish and propose recommendations for their proper handling and possible solutions to add value to the product, through the improvement of the quality and good handling practices. For this purpose, the methodology used was based on ergonomic analysis of their work through observational techniques and interactional with the focus group, the jangadeiros, to understand their activity and eval uated the freshness and quality of the fish by sensory analysis, and microbiological parameters and physicochemical from existing legislation Ordinance No. 185 of May 13, 1997 and RIISPOA - amended on December 1, 2007 and RDC No. 12, dated January 2, 2001. According to the results obtained in laboratory tests, it can be established, the acceptable quality of fish as the existing rules and regulations parameters , not getting significant deterioration caused by poor handling and improper storage of fish.