Um serviço de certificação digital para plataformas de middleware

Nowadays due to the security vulnerability of distributed systems, it is needed mechanisms to guarantee the security requirements of distributed objects communications. Middleware Platforms component integration platforms provide security functions that typically offer services for auditing, for guarantee messages protection, authentication, and access control. In order to support these functions, middleware platforms use digital certificates that are provided and managed by external entities. However, most middleware platforms do not define requirements to get, to maintain, to validate and to delegate digital certificates. In addition, most digital certification systems use X.509 certificates that are complex and have a lot of attributes. In order to address these problems, this work proposes a digital certification generic service for middleware platforms. This service provides flexibility via the joint use of public key certificates, to implement the authentication function, and attributes certificates to the authorization function. It also supports delegation. Certificate based access control is transparent for objects. The proposed service defines the digital certificate format, the store and retrieval system, certificate validation and support for delegation. In order to validate the proposed architecture, this work presents the implementation of the digital certification service for the CORBA middleware platform and a case study that illustrates the service functionalities

Aborto: um fenômeno sem lugar – uma experiência de plantão psicológico a mulheres em situação de abortamento

The present paper discusses the experience of a psychological emergency attendance in Maternidade Escola Januário Cicco (MEJC) in Natal and has as main objective to investigate the limits and possibilities of this practice in offering psychological care to women in abortion situation. The Ministry of Health considers the abortion a serious medical problem in Brazil and acknowledge the repercussions it causes in personal life and between the women’s family, most of all among the younger ones, in fully productive and reproductive age, that if not supported may suffer deep psychological and physical wounds. This research inserts itself in the field of psychological practices in institutions, by many ways, and aim to offer, by different approaches, among then the psychological emergency attendance, a psychological attention at the institutions. This attention refers to a care during the suffering at the time of crisis and in the many ways that the problem is present. The results were analyzed at a heideggerian hermeneutics optics, which search a determined aspect of reality that intends to know/understand, accompanied by the man’s own movement in existence. The cartography and the logbook were chosen in narrative form as a resource to allow the approximation of daily experience. The emergency psychological attendance was realized on curettage setor of MEJC between march of 2013 and february 2014 at tuesdays and Thursdays from 9h to 12h. The existential plot unveiled at this experience showed some possibilities and limits of emergency psychological attendance as studied. Among the possibilities, the emergency attendance helped the women that suffered an abortion to find new meanings, as: realize the need to self-care; see in the attendance a way to cope with the lost or other issues in their life’s; to enlarge the possibilities of her choice; to rethink her sex e reproductive life, and rethink her relationships and life projects. The attendance has proven itself as a health care mechanism showing the women the need to search for the necessary condition to self-care and to question what in that environment was saw as natural. The attendance showed itself as a suitable practice to the health care demand by creating/inventing ways of meet the woman needs. The attendance promoted an opening at the technical horizons of women’s, what was realized when the complaints moved past the physical health. As refered to the limits, some needs was beyond the emergency attendance service and demanded forwarding to regular psychological care or others specialized services. The service was not able to attend all of the demands of the sector. The attendance did not touched the medical staff to its need or made a change in posture to act beyond the technicality. The attendance, although has not made change in this context, was able to show the main difficulties, like the lack on prepare of the medical staff to deal with the abortion past beyond the technical procedure and the precariousness of the infrastructure of the services offered. At last, the attendance represented a shelter to the women in abortion situation, allowing the suffering to have a place.

Incidência de cárie dentária em adolescentes em município do Nordeste brasileiro, 2006

NORO, Luiz Roberto Augusto et al. Incidência de cárie dentária em adolescentes em município do Nordeste brasileiro, 2006, Cadernos de Saúde Pública, Rio de Janeiro, v. 25, n. 4, p. 783-790, abr. 2009.

Impactos da adoção de sistemas de informação no judiciário: pesquisa com usuários do sistema processual virtual em um juizado especial federal

The Information Technology (IT) is increasing his applicability to business, both private and public companies. It is necessary the adequate use of the new technologies and get cooperation and technology acceptance of the system. People tend to resist to the changes, contributing so that the technology is rejected or even it is not recognized as promoting of the changes. This study is relevant and aim to evaluate the impacts of new technologies, considering their users as fundamental factors in the change process. The survey analyzed the advantages and the barriers of the system use in three federal special judicial of Rio Grande do Norte, with data collected in May of 2007, through the application of questionnaires to thirty eight users of the virtual system CRETA. The users' perception was evaluated, under the optics of five variables: efficiency, image, agility, ease of use and quality. Starting from the obtained results, it was evidenced that the implementation of the system felt accordingly the expected and it reached the objectives intended that were: the velocity and efficiency in the path of the lawsuits, larger productivity, resulting in a better quality of the final work introduced to the citizen and proportionate an improvement in the organizational image of the judiciary power

Mudança dos processos de negócios e adequação da TI nas empresas em decorrência da implantação do sistema público de escrituração digital SPED: um estudo de casos múltiplos

Companies have always been organized by processes, often imperceptible to its employees. With the advancement of technology, organizational processes currently run an organization through computers, and thus generate immediate information that is available to each sector. With the objective of seeking business information in real time, the government created the SPED - Public System of Digital, which involves three subsystems, which are the Electronic Invoice, Digital Accounting Bookkeeping and Digital Tax Bookkeeping. This system is revolutionizing the business structures when gathering, in an innovative way, all information and interlinked business processes. For the implementation of SPED, a revision in the organizational processes is required, since the information is generated and is sent online to the government, without mistakes. Thus the study aimed to analyze the change brought about by the implementation of the Public System of Digital SPED in the main business processes. In order to do so, we have performed a multiple case study involving three companies in the state of Para, two operate in wholesale and one explores agribusiness. The Data collection was performed by accounting professionals, IT and managers. According to the results obtained, it was found that in two companies, the IT infrastructure was capable of deploying the new system without major problems, while one company had more difficulties to cope with the new system. However, all companies had to examine its processes to make the customizations needed to fit. It was also observed that there is no IT Governance in two companies. Therefore, we recommend the use of an appropriate model, not only for the implementation of SPED, but as a way to manage and extract better results from investment in information technology

Construção, caracterização e aplicação de eletrodos para descarga por arco de cátodo oco

The system built to characterize electrodes and, consequently, deposited fine films are constituted by a hollow cathode that works to discharges and low pressures (approximately 10-3 to 5 mbar), a source DC (0 to 1200 V), a cylindrical camera of closed borossilicato for flanges of stainless steel with an association of vacuum bombs mechanical and spread. In the upper flange it is connected the system of hollow cathode, which possesses an entrance of gas and two entrances for its refrigeration, the same is electrically isolated of the rest of the equipment and it is polarized negatively. In front of the system of hollow cathode there is a movable sample in stainless steel with possibility of moving in the horizontal and vertical. In the vertical, the sample can vary its distance between 0 and 70 mm and, in the horizontal, can leave completely from the front of the hollow cathode. The sample and also the cathode hollow are equipped with cromel-alumel termopares with simultaneous reading of the temperatures during the time of treatment. In this work copper electrodes, bronze, titanium, iron, stainless steel, powder of titanium, powder of titanium and silício, glass and ceramic were used. The electrodes were investigated relating their geometry change and behavior of the plasma of the cavity of hollow cathode and channel of the gas. As the cavity of hollow cathode, the analyzed aspects were the diameter and depth. With the channel of the gas, we verified the diameter. In the two situations, we investigated parameters as flow of the gas, pressure, current and applied tension in the electrode, temperature, loss of mass of the electrode with relationship at the time of use. The flow of gas investigated in the electrodes it was fastened in a work strip from 15 to 6 sccm, the constant pressure of work was among 2.7 to 8 x 10-2 mbar. The applied current was among a strip of work from 0,8 to 0,4 A, and their respective tensions were in a strip from 400 to 220 V. Fixing the value of the current, it was possible to lift the curve of the behavior of the tension with the time of use. That curves esteem in that time of use of the electrode to its efficiency is maximum. The temperatures of the electrodes were in the dependence of that curves showing a maximum temperature when the tension was maximum, yet the measured temperatures in the samples showed to be sensitive the variation of the temperature in the electrodes. An accompaniment of the loss of mass of the electrode relating to its time of use showed that the electrodes that appeared the spherical cavities lost more mass in comparison with the electrodes in that didn't appear. That phenomenon is only seen for pressures of 10-2 mbar, in these conditions a plasma column is formed inside of the channel of the gas and in certain points it is concentrated in form of spheres. Those spherical cavities develop inside of the channel of the gas spreading during the whole extension of the channel of the gas. The used electrodes were cut after they could not be more used, however among those electrodes, films that were deposited in alternate times and the electrodes that were used to deposit films in same times, those films were deposited in the glass substrata, alumina, stainless steel 420, stainless steel 316, silício and steel M2. As the eletros used to deposit films in alternate time as the ones that they were used to deposit in same times, the behavior of the thickness of the film obeyed the curve of the tension with relationship the time of use of the electrode, that is, when the tension was maximum, the thickness of the film was also maximum and when the tension was minimum, the thickness was minimum and in the case where the value of the tension was constant, the thickness of the film tends to be constant. The fine films that were produced they had applications with nano stick, bio-compatibility, cellular growth, inhibition of bacterias, cut tool, metallic leagues, brasagem, pineapple fiber and ornamental. In those films it was investigated the thickness, the adherence and the uniformity characterized by sweeping electronic microscopy. Another technique developed to assist the production and characterization of the films produced in that work was the caloteste. It uses a sphere and abrasive to mark the sample with a cap impression, with that cap form it is possible to calculate the thickness of the film. Through the time of life of the cathode, it was possible to evaluate the rate of waste of its material for the different work conditions. Values of waste rate up to 3,2 x 10-6 g/s were verified. For a distance of the substratum of 11 mm, the deposited film was limited to a circular area of 22 mm diameter mm for high pressures and a circular area of 75 mm for pressure strip. The obtained films presented thickness around 2,1 µm, showing that the discharge of arch of hollow cathode in argon obeys a curve characteristic of the tension with the time of life of the eletrodo. The deposition rate obtained in this system it is of approximately 0,18 µm/min

Desenvolvimento de um sistema misto de pasta à base de geopolímero e cimento portland para correção de perda de circulação

The materials engineering includes processes and products involving several areas of engineering, allowing them to prepare materials that fulfill the needs of various new products. In this case, this work aims to study a system composed of cement paste and geopolymers, which can contribute to solving an engineering problem that directly involves the exploitation of oil wells subject to loss of circulation. To correct it, has been already proposed the use of granular materials, fibers, reducing the drilling fluid or cement paste density and even surface and downhole mixed systems. In this work, we proposed the development of a slurry mixed system, the first was a cement-based slurry and the second a geopolymer-based slurry. The cement-based slurry was formulated with low density and extenders, 12.0 ppg (1.438 g/cm ³), showing great thixotropic characteristics. It was added nano silica at concentrations of 0.5, 1.0 and 1.5 gps (66.88, 133.76 and 200.64 L/m3) and CaCl2 at concentrations of 0.5, 1, 0 and 1.5%. The second system is a geopolymer-based paste formulated from molar ratios of 3.5 (nSiO2/nAl2O3), 0.27 (nK2O/nSiO2), 1.07 (nK2O/nAl2O3) and 13.99 (nH2O/nK2O). Finally, we performed a mixture of these two systems, for their application for correction of circulation lost. To characterize the raw materials, XRD, XRF, FTIR analysis and titration were performed. The both systems were characterized in tests based on API RP10B. Compressive strength tests were conducted after curing for 24 hours, 7 and 28 days at 58 °C on the cement-based system and the geopolymer-based system. From the mixtures have been performed mixability tests and micro structural characterizations (XRD, SEM and TG). The results showed that the nano silica, when combined with CaCl2 modified the rheological properties of the cement slurry and from the concentration of 1.5 gpc (200.64 L / m³) it was possible to obtain stable systems. The system mixture caused a change in the microstructure of the material by favoring the rate of geopolymer formation to hinder the C3S phase hydration, thus, the production of CSH phases and Portlandite were harmed. Through the mixability tests it can be concluded that the system, due to reduced setting time of the mixture, can be applied to plug lost circulation zones when mixed downhole

Tratamento de fístulas enterocutâneas através de sistema a vácuo com alta pressão e dieta oral normal

Enterocutaneous fistulas are associated with prolonged hospital stay, high morbidity/mortality, and increase in hospital costs. This study aims to describe the use of a vacuum system and normal oral diet in dealing with this problem. Methods: Seventy-four consecutive patients with recent and defined external postoperative fistulas were analyzed. Abdominal imaging was used to exclude abscess and distal obstruction. The fistula tract was sealed with Foley catheter, connected to a negative pressure flask, changed daily for 5, 10 or 15 days, as necessary. Normal oral diet was permitted. Results: No patient died. Serum albumin and transferrin showed significantly higher levels at the end of treatment than at the beginning. The moderate and low-output fistulas had the best results (97% closed). Forty-eight (65%) fistulas closed after five days, 16(22%) after 10 days and 4(5%) after 15 days. Treatment failed in 6(8%) patients, who subsequently underwent surgery. Only one patient with low-output did not close her fistula. The cost of the treatment was US$ 41.75/day and it was considered cost effective. Conclusions: The vacuum system demonstrated good results in the treatment of fistulas. It included simplicity, low cost, short hospital stay, absence of skin breakdown, normal eating, good nutrition and activity patterns

Apelação no código de processo civil: uma análise sob o prisma do princípio da efetividade

The present dissertation, elaborated is based on the deductive method, through the use of the General Theory of Resources concepts, by the main types of judgments existing in the Code of Civil Procedure, the interlocutory judgment and sentence, as well as the features and effects that challenge these decisions, we sought to identify on this theme one of the greatest evils facing the justice system in the world, which is the processing delays. This slowness in adjudication affects seriously the principle of effectiveness, one of the postulates of procedural law and society as a whole. Thus, the use of tort serves to fight the interlocutory decision and appeal which challenges the judge`s ruling. It is a resource for excellence in appellate system as it meets with the most awaited decision of the process. In weighing the importance of the appeal that seeks to oppose the court decision today by the numerous reforms that the procedural system has been through, it has ended up to transform the process ineffective or inconsistent, for it is much easier to have efficacy in a interlocutory decision for preliminary injunction than by judgment on the merits of the judge. This is due to the prevision of the resources and their effect to those decisions. That is, the interlocutory decision involves interlocutory appeal only in the devolved effect, allowing its provisional execution, and the sentence has as recourse to appeal the double effect, remanding and suspension, which necessarily prevents its provisional execution. But it undeniably shows a paradox, because as to give effect to a measure that is based on a mere probability by a summary cognition, partial and superficial, and stop it on a decision by a court that is closer to the truth and sure, for a full and depleting cognition? It is seriously affect the principle of effectiveness. Therefore, starting from this ineffectiveness, sought to defend the solution of this problem with the approval of the bill n. º 3.605/2004 or the new Code of Civil Procedure project that modifies the general rule the effects of appeal. That is, remanding and suspensive, as to merely remanding effect to and thereby enable the provisional execution of the judgment of the court of the first degree of jurisdiction, giving effectiveness and enhancing the decision of the magistrate, making a fair distribution of time in the process and better guaranteed principle of access to justice

SAMVC sistema de autoria de museus virtuais colaborativos

The use of graphical objects three-dimensional (3D) multimedia applications is gaining more space in the media. Networks with high transmission rates, computers with large processing and graphics boost and popularize such three-dimensional applications. The areas of 3D applications ranging from military applications, entertainment applications geared up for education. Within the applications related to education, we highlight the applications that create virtual copies of cultural spaces such as museums. Through this copy, you can virtually visit a museum, see other users, communicate, exchange information on works, etc. Thereby allowing the visit museums physically distant remote users. A major problem of such virtual environments is its update. By dealing with various media (text, images, sounds, and 3D models), its subsequent handling and update on a virtual environment requires staff with specialized knowledge. Speaking of museums, they hardly have people on your team with this profile. Inside the GT-MV (Grupo de Trabalho de Museus Virtuais), funded by RNP (Rede Nacional de Ensino e Pesquisa) propose a portal for registration, amendment and seen collaborative virtual museums of Brazil. The update, be it related to work or physical space, a system with a national scale like this, would be impossible if done only by the project team. Within this scenario, we propose the modeling and implementation of a tool that allows editing of virtual spaces in an easy and intuitive as compared with available tools. Within the context of GT-MV, we apply the SAMVC (Sistema de Autoria de Museus Virtuais Colaborativos) to museums where curators build the museum from a 3D floor plan (2D). The system, from these twodimensional information, recreates the equivalent in three dimensions. With this, through little or no training, team members from each museum may be responsible for updating the system

Métricas de desempenho para sistema de alarmes de processos industriais

The evolution of automation in recent years made possible the continuous monitoring of the processes of industrial plants. With this advance, the amount of information that automation systems are subjected to increased significantly. The alarms generated by the monitoring equipment are a major contributor to this increase, and the equipments are usually deployed in industrial plants without a formal methodology, which entails an increase in the number of alarms generated, thus overloading the alarm system and therefore the operators of such plants. In this context, the works of alarm management comes up with the objective of defining a formal methodology for installation of new equipment and detect problems in existing settings. This thesis aims to propose a set of metrics for the evaluation of alarm systems already deployed, so that you can identify the health of this system by analyzing the proposed indices and comparing them with parameters defined in the technical norms of alarm management. In addition, the metrics will track the work of alarm management, verifying if it is improving the quality of the alarm system. To validate the proposed metrics, data from actual process plants of the petrochemical industry were used

Projeto, construção e análise de desempenho de coletores solares alternativos utilizando garrafas pet

A solar alternative system for water heating is presented. It work on a thermosiphon, consisting of one or two alternative collectors and a water storage tank also alternative, whose main purpose is to socialize the use of energy mainly to be used by people of low income. The collectors were built from the use of pets bottles, cans of beer and soft drinks and tubes of PVC, ½ " and the thermal reservoirs from a drum of polyethylene used for storage of water and garbage placed inside cylinder of fiber glass and EPS ground between the two surfaces. Such collectors are formed by three elements: pet bottles, cans and tubes absorbers. The heating units, which form the collector contains inside the cans that can be closed, in original form or in the form of plate. The collectors have an absorber grid formed by eight absorbers PVC tube, connected through connections at T of the same material and diameter. It will be presented data of the thermal parameters which demonstrate the efficiency of the heating system proposed. Relative aspects will be boarded also the susceptibility the thermal degradation and for UV for the PVC tubes. It will be demonstrated that this alternative heating system, which has as its main feature low cost, presents thermal, economic and materials viabilities

Caracterização do óleo de carnaúba para uso como biolubrificante

Lubricant is responsible for reducing the wear on the friction protect the metal against oxidation, corrosion and dissipates excess heat, making it essential for the balance of a mechanical system, consequently prolonging the useful life of such a system. The origin of lubricating oils is usually mineral being extracted from the petroleum. But the search for a new source of production of lubricants and fuels it is necessary to meet future demands and reduce the possible environmental damage. For this reason, looking alternative means to produce certain products derived from petroleum, such as biodiesel, for example. Returning to the realm of lubricants, also one realizes this need for new raw materials for their production. Vegetable oil is a renewable resource and biodegradable, and its use entails advantages in environmental, social and economic. The development of this project aims to characterize the carnauba oil as a lubricant plant, or biolubricant. To analyze the oil carnauba tests as checking density, flash point, fire point, viscosity, viscosity, acid number, pH, copper corrosion, thermal conductivity and thermal resistivity were developed. In addition, for conducting the wear on the friction and the gradient of the system temperature, the analysis equipment is designed for wear on the friction. Based on these results, it is observed that the oil carnauba show good correlation to its application as biolubricant

Determinação do coeficiente de decaimento bacteriano em wetland - alagado construído

Wetlands systems are considered nowadays as a treatment method that uses simple, easy operation and low cost technology, which has been used in various parts of the world and also in Brazil. Used alone or as a complement to other types of treatment systems, once it effectively removes nutrients, pathogens and other pollutants in the water. Due to the high complexity found in wetlands, making it difficult to predict the response of the system to treat wastewater, one should consider as ideal to base the sizing of the wetland system over the necessary removal of this parameter instead of scaling it from empiricism. The study was conducted to determine the coefficient of bacterial decrease in the Wetland unit located at Ponta Negra Station Sewage Treatment, located in Natal, the coastal region of Rio Grande do Norte. The most representative model to determine the bacterial decrease in this system was the one from Chick for hydraulic piston system. Kb of 0.37 d-1 were found for the flow rate of 15m³/d, while for the system operating at maximum design flow, 30m³/d, the Kb of 0.98 d-1 was found

Percepção de riscos ambientais de populações vulneráveis a inundações e deslizamentos de dunas em Natal-RN

In urban, flooding and landslides are among the troubles that most bring human and material loss. Therefore, this study objected to perform an analysis on the risk perception on the population living in social environmental vulnerable places in order to understand what is the way this population realize the risks they are exposed to and what are the outbrave strategies the develop. The first analyzed area was Complexo Passo da Pátria for the flooding risk problematic and then the Cidade Nova neighborhood threatened by the dunes slides. The areas locate, respectively, in the West and East zones of Natal-RN. Using an interview screenplay adapted from risk perception researches from different brazilian cities, it was collected primarily data on the variables: perception, evaluation and choice, safety threshold, adjustment, decision and participation. Due to the studied areas characteristics the qualitative approach adjusted itself to the difficulties for accessing the areas. The studied places characterize for its insecure situation like selling/using drugs, robbery and murder among others. Due to this situation the interviewed individuals were the ones that could be found more accessibly and available in the moment and the interviews were made in the community leader presence of each area. Through the discourse of the respondents analysis it was able to conclude that the interviewed population is exposed to a high vulnerability grade and risks. However it was identified substantial differences between the perception and risks of Complexo Passo da Pátria and bairro Cidade Nova, because in the first area the intervied ones can recognize the high risk they are exposed to in a more emphatic way to the interviewed ones for the Cidade Nova neighborhood. Furthermore, there is a heavy dissatisfaction for the population of the two places about the city hall positions relating to the present problems in the studied areas. It was also identified the strategy development of acquaintanceship with the risk in the research places beyond a feeling of belonging and affection between the dwellers and the places, yet it was more evident for Complexo Passo da Pátria. Though this analysis it was possible to understand and perceptions and the behavior of the individuals or social groups facing the risks as acceptance and rejection of determined risks beyond adaptation measures of living together with the persistence presence of risks. Therefore, qualitative nature researches emphasizing the perception approach are in the fundamental importance in the studies about risks making it possible to offer aids to the urban planning and management in the implement of effective preventive measures and compatible with the population aims