Plásticos reforçados a base de tecidos híbridos: efeitos da anisotropia e geometria normativa na caracterização mecânica e da fratura

As most current studies, reinforced plastics have been, in recent years, a viable alternative in building structural elements of medium and large, since the lightness accompanied by high performance possible. The design of hybrid polymer composites (combination of different types of reinforcements) may enable structural applications thereof, facing the most severe service conditions. Within this class of composite materials, reinforced the underlying tissues hybrid high performance are taking space when your application requires high load bearing and high rigidity. The objective of this research work is to study the challenges in designing these fabrics bring these materials as to its mechanical characterization and fracture mechanisms involved. Some parameters associated with the process and / or form of hybridization stand out as influential factors in the final performance of the material such as the presence of anisotropy, so the fabric weave, the process of making the same, normative geometry of the specimens, among others. This sense, four laminates were developed based hybrid reinforcement fabrics involving AS4 carbon fiber, kevlar and glass 49-E as the matrix epoxy vinyl ester resin (DERAKANE 411-350). All laminates were formed each with four layers of reinforcements. Depending on the hybrid fabric, all the influencing factors mentioned above have been studied for laminates. All laminates were manufactured industrially used being the lamination process manual (hand-lay-up). All mechanical characterization and study of the mechanism of fracture (fracture mechanics) was developed for laminates subjected to uniaxial tensile test, bending in three and uniaxial compression. The analysis of fracture mechanisms were held involving the macroscopic, optical microscopy and scanning electron microscopy

Modelagem analítica e experimental da filtração em meios porosos

Deep bed filtration occurs in several industrial and environmental processes like water filtration and soil contamination. In petroleum industry, deep bed filtration occurs near to injection wells during water injection, causing injectivity reduction. It also takes place during well drilling, sand production control, produced water disposal in aquifers, etc. The particle capture in porous media can be caused by different physical mechanisms (size exclusion, electrical forces, bridging, gravity, etc). A statistical model for filtration in porous media is proposed and analytical solutions for suspended and retained particles are derived. The model, which incorporates particle retention probability, is compared with the classical deep bed filtration model allowing a physical interpretation of the filtration coefficients. Comparison of the obtained analytical solutions for the proposed model with the classical model solutions allows concluding that the larger the particle capture probability, the larger the discrepancy between the proposed and the classical models

Geometria e simetria nas rendas de bilro: contribuições para matemática escolar

A tese tem como objetivo descrever e analisar características e princípios dos padrões das rendas de bilro de modo a estabelecer relações com a Matemática escolar, principalmente, no que se refere aos tópicos como Geometria, simetria, isometria, área, perímetro, entre outros. Desse modo, elaboramos atividades didáticas, com base na Matemática explorada nos padrões da criação da renda de bilro, visando concretizar um exercício investigatório nas aulas de Matemática, de modo que, sejam estabelecidas relações conceituais entre a prática investigada e os conteúdos da Matemática escolar. Para satisfazer esses objetivos, buscamos apoio metodológico na pesquisa bibliográfica, do tipo documental em catálogos como o da Professora Valdelice Girão (1984) e também o de Dawson (1984). Realizamos também a pesquisa empírica durante as visitas ao Museu do Ceará e ao Centro das Rendeiras na Prainha, em Aquiraz, no Ceará. Para realizar as atividades didáticas, apoiamo-nos em Mendes (2009). Consideramos relevante essa abordagem de ensino porque pressupõe a experiência direta do aprendiz com situações reais vivenciadas, nas quais a abordagem instrucional é centrada no aluno. Desse modo, concluímos que para o ensino de conteúdos como Geometria, simetria, isometria, relação entre perímetro e área, entre outros que são abordados na Educação Básica, os modelos decorrentes da criação renda de bilro e outros modelos já descritos na tradição cearense podem ser usados como artefato cultural na criação de atividades didáticas

Fatores de decisão da adoção do gás natural na geração de energia elétrica em pequena escala em postos de combustíveis: um estudo de anális de decusão usando o processo de hierarquia analítica AHP

A modeling of criterias and alternatives is through and applied a questionnaire based on method AHP to proprietors of gas stations. The considered alternatives had been the maintenance of the current state with electric energy of the deliverer and the generation in small scale based on the natural gas. The used criteria had been Cost of the Investment, Final Cost of the Energy, Operational cost, Ambient Benefits, Risk and Variation of Costs. The study it was carried through in the city of Natal, RN in ranks that make use of the natural as for resale, where the generation alternative on the basis of the available gas is present. The main results evidence in a dimension the viability of use of method AHP with questionnaire by means of validation of the judgments with analysis of variance beyond proper the normal mechanisms of analysis of consistency to the method. The main results of the analysis help to show that in this in case that the profile of models of criteria and judgments of the actors is similar, with the final evidence of that it has a dominance of the maintenance of the energy of the deliverer. The main criterion to influence this decision was the risk

Modelagem da decisão por pacotes de viagem: um estudo usando processo de hierarquia analítica AHP

The objective of this dissertation is to propose a Multi Criteria Decision Aid Model to be used by the costumers of the travel agencies and help them to choose the best package travel. The main objective is to contribute for the simplification of the travel package decision choice from the identification of the models of values and preference of the customers and applying them to the existing package. It is used the Analytic Hierarchy Process (AHP) method to structuralize a decision hierarchic model composed by six criteria (package cost, hotel category, security of the city, travel time, direct flight and position in ranking of the 10 most visited destination) and five real alternatives of packages for a holiday of three days created from travel agency data. The decision analysis was realized for the choice of a travel package by a group composed by two couples that regularly travels together, to which was asked to do a pairwise judgment of the criteria and the alternatives. The mains results show that, although been a group that travels together, there are different models of values in the weights of the criteria and a certain convergence in the scales of preferences of the alternatives in the criteria. It was not pointed a dominant alternative for all the members of the group separately, but an analysis of a total utility of the group shows a classification and an order of the travel packages and an alternative clearly in front of the others. The sensitivity analysis revels that there are changes in the ranking, but the two alternatives best classified in the normal analysis are the same ones in the sensitivity analysis, although with the positions changed. The analysis also led to a simplification of the process with the exclusion of alternatives dominated for the others ones. As main conclusion, it is evaluated that the model and method suggested allow a simplification of the decision process in the choice of travel packages

Análise de critérios de decisão em estratégia de arranjos produtivos locais: um estudo aplicando o processo de hierarquia analítica (AHP) no setor de cerâmica

This master thesis has the objective of investigating the strategic decision criteria of participants of Local Production Arrangements (LPA) in Brazil. The LPA s are an initiative of support agents to enterprises with the purpose of organizing joint actions for the development of groups (clusters) of enterprises. The choice of the actions is a decision of the participating enterprises and this paper aims at applying a Multi-criteria Analysis Method to analyze the criteria of entrepreneurs that are participating of a LPA. The used method is the Process of Analytical Hierarchy (PAH) and an application is presented along with questionnaires to participants of a ceramic LPA in the northeast of Brazil. The main results show that, in first place, from the implicit strategy of each enterprise there is only one objective for the LPA group and so, at the beginning, an action decided by all of them tends to favor some more than others. In second place, it was observed that there are general inconsistencies between the strategic objectives and the importance as to criteria, even though there have been cases of coherency. As the main conclusion it is pointed that the use of Methods of MCDA is useful to improve the decision making process and to bring more transparency to the logic of the found results

Uma aplicação de análise de decisão com o método AHP Processo de hierarquia analítica: um estudo sobre adoção de Sistema eletrônico de cobrança no Transporte público urbano

This thesis carries through an application of Analysis of Multicriterion Decision with use of the method of Analytical Hierarchy Process (AHP) in the problematic one of taking of decision of the adoption of electronic collecting in the system of urban transport in the country, a subject that has been controversial. A modeling of criteria and alternatives is carried through and applied a questionnaire based on method AHP the excellent actors in the system of urban transport - Leading of the Managing Agency Public Municipal theatre of Urban Transports, Controller of Company of Bus, Controller of Labor union, Controller of Union of Companies, Communitarian Leader. The considered alternatives were: the maintenance of the current state with collectors, the implementation of electronic collection without collectors, and the implementation of electronic collection with collectors. The used criteria were: job, impact in the fare, control of the system, easiness of use, information. The study was carried through in the city of Natal, RN, where if the adoption of electronic collection argues and where this implementation in some bus lines between Natal and Parnamirim exists, city that integrates the region of the great Natal. The main results of the method evidence in a dimension, the viability of use of method AHP with questionnaire by means of validation of the judgments with analysis of variance beyond proper the normal mechanisms of analysis of consistency to the method, and in another one, the contribution of the analysis boarding multicriterion to become the judgments more clearly. The main results of the analysis help to show that although to models of criteria and distinct judgments of the actors, the method evidenced that it has inclination the adoption of the electronic collection on the current situation, even so with divergences between the maintenance or not of the collector. The research points to the possibility of accomplishment of the application of the AHP in successive rounds of judgments

Análise e otimização de superfícies seletivas de Frequência utilizando redes neurais artificiais e algoritmos de otimização natural

The bidimensional periodic structures called frequency selective surfaces have been well investigated because of their filtering properties. Similar to the filters that work at the traditional radiofrequency band, such structures can behave as band-stop or pass-band filters, depending on the elements of the array (patch or aperture, respectively) and can be used for a variety of applications, such as: radomes, dichroic reflectors, waveguide filters, artificial magnetic conductors, microwave absorbers etc. To provide high-performance filtering properties at microwave bands, electromagnetic engineers have investigated various types of periodic structures: reconfigurable frequency selective screens, multilayered selective filters, as well as periodic arrays printed on anisotropic dielectric substrates and composed by fractal elements. In general, there is no closed form solution directly from a given desired frequency response to a corresponding device; thus, the analysis of its scattering characteristics requires the application of rigorous full-wave techniques. Besides that, due to the computational complexity of using a full-wave simulator to evaluate the frequency selective surface scattering variables, many electromagnetic engineers still use trial-and-error process until to achieve a given design criterion. As this procedure is very laborious and human dependent, optimization techniques are required to design practical periodic structures with desired filter specifications. Some authors have been employed neural networks and natural optimization algorithms, such as the genetic algorithms and the particle swarm optimization for the frequency selective surface design and optimization. This work has as objective the accomplishment of a rigorous study about the electromagnetic behavior of the periodic structures, enabling the design of efficient devices applied to microwave band. For this, artificial neural networks are used together with natural optimization techniques, allowing the accurate and efficient investigation of various types of frequency selective surfaces, in a simple and fast manner, becoming a powerful tool for the design and optimization of such structures

Uma proposta de FSS fractal com geometria simplificada

Frequency Selective Surfaces (FSS) are periodic structures in one or two dimensions that act as spatial filters, can be formed by elements of type conductors patches or apertures, functioning as filters band-stop or band-pass respectively. The interest in the study of FSS has grown through the years, because such structures meet specific requirements as low-cost, reduced dimensions and weighs, beyond the possibility to integrate with other microwave circuits. The most varied applications for such structures have been investigated, as for example, radomes, antennas systems for airplanes, electromagnetic filters for reflective antennas, absorbers structures, etc. Several methods have been used for the analysis of FSS, among them, the Wave Method (WCIP). Are various shapes of elements that can be used in FSS, as for example, fractal type, which presents a relative geometric complexity. This work has as main objective to propose a simplification geometric procedure a fractal FSS, from the analysis of influence of details (gaps) of geometry of the same in behavior of the resonance frequency. Complementarily is shown a simple method to adjust the frequency resonance through analysis of a FSS, which uses a square basic cell, in which are inserted two reentrance and dimensions these reentrance are varied, making it possible to adjust the frequency. For this, the structures are analyzed numerically, using WCIP, and later are characterized experimentally comparing the results obtained. For the two cases is evaluated, the influence of electric and magnetic fields, the latter through the electric current density vector. Is realized a bibliographic study about the theme and are presented suggestions for the continuation of this work

A modelagem matemática como alternativa de ensino e aprendizagem da geometria na educação de jovens e adultos

This is work itself insert in the mathematics education field of the youth and adult education to aim to practitioners of the educational action into the mathematics area performing to with this is teaching kind, adopting to as parameter the Mathematics Molding approach. The motive of the research is to draw up a application proposal of the molding mathematics as teaching and learning geometry alternative in the youth and adult education. The research it develops in three class of the third level (series 5th and 6th) of he youth and adults education in the one school municipal from the Natal outskirts. Its have qualitative nature with participating observation approach, once performing to directly in to research environment as a mathematics teacher of those same classes. We are used questionnaires, lesson notes and analyses of the officials documents as an basis of claim instruments. The results indicates that activity used the mathematic moldings were appreciated the savoir-faire of the student in to knowledge construction process, when search develop to significant learning methods, helping to student build has mathematics connections with other knowledge areas and inside mathematics himself, so much that enlarges your understanding and assist has in your participation in the other socials place, over there propitiate to change in student and teacher posture with relation to mathematic classroom dynamics

Geometria e arirmética numa visão multicultural: uma experiência pedagógica

This paper aims to build a notebook of activities that can help the teacher of elementary school mathematics. Topics covered are arithmetic and geometry and the activities proposed here were developed aiming print them a multicultural character. We take as a base line developed by Claudia Zaslavsky multiculturalism and reflected in his books "Games and activities worldwide" and "More games and activities worldwide." We structure our work around four themes: the symbol of the Olympic Games, the pyramids of Egypt, the Russian abacus abacus and Chinese. The first two themes allow you to explore basic concepts of geometry while the latter two themes allow us to explore numerical notation and arithmetic operations

Geometrias não-eucludianas como anomalias: implicações para o ensino de geometria e medidas

This present research the aim to show to the reader the Geometry non-Euclidean while anomaly indicating the pedagogical implications and then propose a sequence of activities, divided into three blocks which show the relationship of Euclidean geometry with non-Euclidean, taking the Euclidean with respect to analysis of the anomaly in non-Euclidean. PPGECNM is tied to the line of research of History, Philosophy and Sociology of Science in the Teaching of Natural Sciences and Mathematics. Treat so on Euclid of Alexandria, his most famous work The Elements and moreover, emphasize the Fifth Postulate of Euclid, particularly the difficulties (which lasted several centuries) that mathematicians have to understand him. Until the eighteenth century, three mathematicians: Lobachevsky (1793 - 1856), Bolyai (1775 - 1856) and Gauss (1777-1855) was convinced that this axiom was correct and that there was another geometry (anomalous) as consistent as the Euclid, but that did not adapt into their parameters. It is attributed to the emergence of these three non-Euclidean geometry. For the course methodology we started with some bibliographical definitions about anomalies, after we ve featured so that our definition are better understood by the readers and then only deal geometries non-Euclidean (Hyperbolic Geometry, Spherical Geometry and Taxicab Geometry) confronting them with the Euclidean to analyze the anomalies existing in non-Euclidean geometries and observe its importance to the teaching. After this characterization follows the empirical part of the proposal which consisted the application of three blocks of activities in search of pedagogical implications of anomaly. The first on parallel lines, the second on study of triangles and the third on the shortest distance between two points. These blocks offer a work with basic elements of geometry from a historical and investigative study of geometries non-Euclidean while anomaly so the concept is understood along with it s properties without necessarily be linked to the image of the geometric elements and thus expanding or adapting to other references. For example, the block applied on the second day of activities that provides extend the result of the sum of the internal angles of any triangle, to realize that is not always 180° (only when Euclid is a reference that this conclusion can be drawn)

O Brasil n o berço da desigualdade: uma abordagem analítica sobre os significados das fotografias de Sebastião Salgado

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

O Mitsein e as perspectivas decisórias da autenticidade segundo a analítica existencial: ponderações ontológicas para além dos limites éticos e políticos do ser-com

The present work focuses in the question of being-wit-others (Mitsein) on Martin Heidegger s philosophy. To do so, it takes base on his pivotal scripts, such as Being and Time and Na Introduction to Philosophy, in which this theme is scrutinized. The development line adopted in this work consists in advancing the existential connection between the being-with-others question attained to Dasein s ontological relation in its terms of authenticity and inauthenticity. So on, it is necessary to comment é others philosophical elements that surround this alterity relationship, analyzing phenomenologically how being-in-the-world inflicts the Dasein in its deepest and more important choice aspects, which can direct Dasein to its authenticity or inauthenticity. Facing this decisory context, also shall be observed the way Dasein finds to share the truth in accordance with its interaction with others, and how this mode of being summarizes all ontological structure of man s comprehension. The truth works as an integrative element from which the Dasein cannot escape, being-with-others is an existential situation that Dasein is not able to stop itself from living (its life-in-progress). This work also contemplates the apparent contradiction of Dasein s been always unfolded in The They mode of being, in its everydayness and being like that interacting with others. As along as this question is developed, the work explains how it is possible to be authentic and resolute (as much as inauthentic) as the Dasein interscts with others, even though, there is no pre-defined rule for these ways of relationship between the Dasein and the others

Calculando distância em geometria espacial usando material manipulável como recurso didático

This work presents a proposal for introducing the teaching of Geometry Space study attempts to demonstrate that the use of manipulatives as a teaching resource can be an alternative learning facilitator for fixing the primitive concepts of geometry, the postulates and theorems, position relationships between points, lines and planes and calculating distances. The development makes use of a sequence of activities aimed at ensuring that students can build a more systematic learning and these are divided into four steps