Ética na pesquisa em Administração

Ethics on scientific research is approached and often discussed in several areas of knowledge connected to health. In the Administration area there are very few studies which approach the topic of ethics on research. The present paper tried to fill in this gap in the production of knowledge about the topic, investigating how the ethical principles found in the literature and in the codes of conduct are noticed and taken into account in Administration research activities developed by acting researchers in Administration Post Graduation Programs. Theoretically speaking, the study was based mainly on the approaches by Creswell (2007) and Bell and Bryman (2007), which discuss the research ethical principles. Methodologically speaking it was all about an exploratory kind of study, with qualitative research approach. Upon data collection, personal interviews were made aiming at its depth and focus groups were formed. The first stage had interviews with four experienced researchers who took part on a teaching and researching event and on the second stage we used the focus group technique. The focus groups were done in four college institutions along with the post graduation programs in Administration in the states of Rio Grande do Norte, Paraíba and Pernambuco, in Brazil. The results suggest the existence of general principles and parameters for the scientific research recommended in the literature and on official resolution. However, in the Administration area, there are only a few recommendations of good practices when it comes to submitting articles for scientific publications but we found no guidance with ethical principles and parameters which cover all the activities in the scientific research and which specifically meet the research particularities in Administration. The main ethical dilemma pointed by the researchers refers to ethical questions which arise at the time of data collection and on disclosing the results. Most researchers do not know the guidelines and the ethical norms on ethics about research that we have in our country neither do they send in their projects to the research ethics committee. When dilemma arises, they decide the ethical question based on their values and common sense. These elements confirm the thesis that the researcher s procedure in the research activities in Administration is predominantly signed by personal values or by common sense and less by ethical principles, whether by not knowing the normative instruments related to ethics or by disagreeing with any disciplining rules on ethical behavior in the research

Estudo morfológico da blenda polimérica poli(metacrilato de metila)/poli(tereftalato de etileno) reciclado (PMMA/PET)

Among the options for plastics modification more convenient, both from a technical-scientific and economic, is the development of polymer blends by processing in the molten state. This work was divide into two stages, with the aim to study the phase morphology of binary blend PMMA / PET blend and this compatibilized by the addition of the poly(methyl methacrylate-co-glycidyl methacrylate-co-ethyl acrylate) copolymer (MMA-GMA-EA). In the first stage is analyzed the morphology of the blend at a preliminary stage where we used the bottle-grade PET in a Haake torque rheometer and the effect of compatibilizer in this blend was evaluated. In the second stage the blend was processed using the recycled PET in a single screw extruder and subsequently injection molding in the shape of specimens for mechanical tests. In both stages we used a transmission electron microscopy (TEM) to observe the morphologies of the samples and an image analyzer to characterize them. In the second stage, as well as analysis by TEM, tensile test, scanning electron microscopy (SEM) and atomic force microscopy (AFM) was performed to correlate the morphology with the mechanical properties. The samples used in morphological analyzes were sliced by cryo-ultramicrotomy technique for the analysis by TEM and the analysis by SEM and AFM, we used the flat face of the block after cut cryogenic. It was found that the size of the dispersed phase decreased with the addition of MMA-GMA-EA in blends prepared in a Haake. In the tensile test, the values of maximum tensile strength and modulus of elasticity is maintained in a range between the value of pure PMMA the pure PET, while the elongation at break was influenced by the composition by weight of the PMMA mixture. The coupling agent corroborated the results presented in the blend PMMA / PETrec / MMA-GMA-EA (80/15/5 %w/w), obtained by TEM, AFM and SEM. It was concluded that the techniques used had a good morphologic correlation, and can be confirmed for final analysis of the morphological characteristics of the blends PMMA / PET

Avaliação de concretos reforçados por confinamento com manta de fibra de vidro estrutural e pré-impreganada

Due to the occurrence of diseases in the use of structural reinforcements in composites, with presentation of concrete blanket detachment, has been identified the need to evaluate the performance of concrete reinforced with glass fiber. This study aims to evaluate these concretes by means of testing methodologies, using concrete with low resistance with structural reinforcement for confinement by preimpregnated glass fiber and traditional fiberglass blanket. The first stage of work was the development of methodologies for analysis, opting for four types, such as the acoustic survey, strength to compressive, the pull-off and ultrasound. Next, tests were carried out using the four selected methodologies in 30 of proof-of-specimens by 5x10 cm, 15 were reinforced with the traditional fiberglass blanket with 5specimens exposed to test a marine environment of marine coastline of Natal-RN and 15 were reinforced with a pre-impregnated glass fiber blanket, as well as 5specimens exposed to a test environment of the marine coastline of Natal-RN. After conducting the acoustic survey, it has been verified a lack of delaminating and air bubbles in the samples, confirming the absence of gross shortcomings in the implementation of the ribs both the traditional fiberglass blanket and in the preimpregnated fiber glass blanket. After carrying out methods of pull-off and compressive strengthening test it was observed that the reinforced proof-bodies with pre-impregnated glass blanket showed maximum stresses higher than the traditional fiberglass blanket; consequently a greater grip with the formation of a smaller area of . fracture, unlike traditional glass mat, which showed lower maximum stresses, with a greater area of fracture. It was also found that the traditional fiberglass blanket presented detachment of blanket-concrete interface, unlike the pre-impregnated fiberglass blanket, which showed a better grip on the blanket-concrete interface. In the trial of ultrasound there was no presence of cracks in the blanket-concrete interface, yielding to both blankets good compactness of the concrete. At the end of this work, they were developed and proposed two methods of testing for evaluation of reinforced concrete structures with composites, for standardization, the acoustic survey and pull-off

Adsorção de cobre e cromo utilizando fibra de sisal visando o tratamento da água produzida pela indústria petrolífera

Currently, the oil industry is the biggest cause of environmental pollution. The objective was to reduce the concentration of copper and chromium in the water produced by the oil industry. It was used as adsorbent natural sisal fiber Agave sp treated with nitric acid and sodium hydroxide. All vegetable fibers have physical and morphological properties that enablies the adsorption of pollutants. The basic composition of sisal is cellulose, hemicellulose and lignin. The features are typically found in the characterization of vegetable fibers, except the surface area that was practically zero. In the first stage of adsorption, it was evaluated the effect of temperature and time skeeking to optimize the execution of the factorial design. The results showed that the most feasible fiber was the one treated with acid in five hours (30°C). The second phase was a factorial design, using acid and five hours, this time was it determined in the first phase. The tests were conducted following the experimental design and the results were analyzed by statistical methods in order to optimize the main parameters that influence the process: pH, concentration (mol / L) and fiber mass/ metal solution volume. The volume / mass ratio factor showed significant interference in the adsorption process of chromium and copper. The results obtained after optimization showed that the highest percentages of extraction (98%) were obtained on the following operating conditions: pH: 5-6, Concentration: 100 ppm and mass/ volume: 1 gram of fiber/50mL solution. The results showed that the adsorption process was efficient to remove chromium and copper using sisal fibers, however, requiring further studies to optimize the process.

Metodologias estatísticas aplicadas a dados de análises químicas da água produzida em um campo maduro de petróleo

Produced water is characterized as one of the most common wastes generated during exploration and production of oil. This work aims to develop methodologies based on comparative statistical processes of hydrogeochemical analysis of production zones in order to minimize types of high-cost interventions to perform identification test fluids - TIF. For the study, 27 samples were collected from five different production zones were measured a total of 50 chemical species. After the chemical analysis was applied the statistical data, using the R Statistical Software, version 2.11.1. Statistical analysis was performed in three steps. In the first stage, the objective was to investigate the behavior of chemical species under study in each area of production through the descriptive graphical analysis. The second step was to identify a function that classify production zones from each sample, using discriminant analysis. In the training stage, the rate of correct classification function of discriminant analysis was 85.19%. The next stage of processing of the data used for Principal Component Analysis, by reducing the number of variables obtained from the linear combination of chemical species, try to improve the discriminant function obtained in the second stage and increase the discrimination power of the data, but the result was not satisfactory. In Profile Analysis curves were obtained for each production area, based on the characteristics of the chemical species present in each zone. With this study it was possible to develop a method using hydrochemistry and statistical analysis that can be used to distinguish the water produced in mature fields of oil, so that it is possible to identify the zone of production that is contributing to the excessive elevation of the water volume.

Contribuição da Geodésia ao monitoramento costeiro do Litoral Setentrional do Rio Grande do Norte, área de influência da indústria petrolífera

The general objective of this thesis has been seasonal monitoring (quarterly time scale) of coastal and estuarine areas of a section of the Northern Coast of Rio Grande do Norte, Brazil, environmentally sensitive and with intense sediment erosion in the oil activities to underpin the implementation of projects for containment of erosion and mitigate the impacts of coastal dynamics. In order to achieve the general objective, the work was done systematically in three stages which consisted the specific objectives. The first stage was the implementation of geodetic reference infrastructure for carrying out the geodetic survey of the study area. This process included the implementation of RGLS (Northern Coast of the RN GPS Network), consisting of stations with geodetic coordinates and orthometric heights of precision; positioning of Benchmarks and evaluation of the gravimetric geoid available, for use in GPS altimetry of precision; and development of software for GPS altimetry of precision. The second stage was the development and improvement of methodologies for collection, processing, representation, integration and analysis of CoastLine (CL) and Digital Elevation Models (DEM) obtained by geodetic positioning techniques. As part of this stage have been made since, the choice of equipment and positioning methods to be used, depending on the required precision and structure implanted, and the definition of the LC indicator and of the geodesic references best suited, to coastal monitoring of precision. The third step was the seasonal geodesic monitoring of the study area. It was defined the execution times of the geodetic surveys by analyzing the pattern of sediment dynamics of the study area; the performing of surveys in order to calculate and locate areas and volumes of erosion and accretion (sandy and volumetric sedimentary balance) occurred on CL and on the beaches and islands surfaces throughout the year, and study of correlations between the measured variations (in area and volume) between each survey and the action of the coastal dynamic agents. The results allowed an integrated study of spatial and temporal interrelationships of the causes and consequences of intensive coastal processes operating in the area, especially to the measurement of variability of erosion, transport, balance and supply sedimentary over the annual cycle of construction and destruction of beaches. In the analysis of the results, it was possible to identify the causes and consequences of severe coastal erosion occurred on beaches exposed, to analyze the recovery of beaches and the accretion occurring in tidal inlets and estuaries. From the optics of seasonal variations in the CL, human interventions to erosion contention have been proposed with the aim of restoring the previous situation of the beaches in the process of erosion.

Fatores litogênicos em pacientes com litíase urinária de Fortaleza, Ceará

Lithiasis is considered a public health issue due to its high prevalence and rates of recurrence. Objective: To identify risk factors for lithiasis in kidney stone patients from Fortaleza, Brazil. In the first stage of the study, the medical records of 197 patients with urinary lithiasis covering the period 1996 2006 were analyzed with regard to clinical and metabolic data. In the second stage, 340 kidney stones were submitted to morphological examination under 10x magnification. According to the external morphology and the cut surface, the stones were classified as pure or mixed, and major and minor components were identified. In addition, the stone fragments of 25 patients treated with lithotripsy were submitted to morphological analysis. In the third stage, a subsample of 50 stones was used in a double-blind comparison of morphological and chemical findings. Results were expressed as concordant, partly concordant (discordant for minor components) or discordant (discordant for major components). The average age of first symptoms was 35.8±13.3 years, with no significant difference between the genders. The male/female ratio was 1:1.7. Recurrence was reported in 53.3% of cases. The main metabolic changes observed were hypernatriuria (80.7%), hypercalciuria (48.7%), low urine volume (43.7%), hyperoxaluria (30.5%) and hyperuricosuria (17.3%). Pure stones represented 34.7% of the total sample of 340 stones. The most common route of elimination was spontaneous for pure stones (49.1%) and surgical for mixed stones (50.5%). Pure stones consisted most frequently of calcium oxalate (OxCa) (59.3%) and uric acid (UA) (23.7%), the former prevalent in women, the latter prevalent in men. The most frequently observed component in mixed stones was OxCa (67.1%), followed by carbapatite (11.2%) and struvite (7.9%). The main components were OxCa and UA for men, and carbapatite and struvite for women. Nearly half (48%) the 25 analyzed fragments were pure, consisting of calcium oxalate dihydrate (COD) (56%), calcium oxalate monohydrate (COM) (48%), phosphate (32%) and UA (20%). Four patients (16%) had infectious stones. In the chemical analysis of the subsample of 50 stones, the most 64 frequently observed major components were calcium (70%), oxalate (66%), ammonium (56%), urate (28%) and carbonate (24%). In the morphological analysis, the main components were calcium and magnesium phosphate (32%), COM (24%), UA (20%), COD (18%) and cystine (6%). Morphological and chemical findings were totally concordant for 38% of the stones, partly concordant in 52% and discordant in 10%. Conclusion: The risk factors for lithiasis in kidney stone patients from Fortaleza (Brazil) were hyperoxaluria, hypercalciuria with or without hypernatriuria, hyperuricosuria and low urine volume

Estado nutricional antropométrico, perfil lipídico e consumo alimentar como fatores de risco para doença cardiovascular em adolescentes

The dyslipidemia and excess weight in adolescents, when combined, suggest a progression of risk factors for cardiovascular disease (CVD). Besides these, the dietary habits and lifestyle have also been considered unsuitable impacting the development of chronic diseases. The study objectives were: (1) estimate the prevalence of lipid profile and correlate with body mass index (BMI), waist circumference (WC) and waist / height ratio (WHR) in adolescents, considering the maturation sexual, (2) know the sources of variance in the diet and the number of days needed to estimate the usual diet of adolescents and (3) describe the dietary patterns and lifestyle of adolescents, family history of CVD and age correlates them with the patterns of risk for CVD, adjusted for sexual maturation. A cross-sectional study was performed with 432 adolescents, aged 10-19 years from public schools of the Natal city, Brazil. The dyslipidemias were evaluated considering the lipid profile, the index of I Castelli (TC / HDL) and II (LDL / HDL) and non-HDL cholesterol. Anthropometric indicators were BMI, WC and WHR. The intake of energy, nutrients including fiber, fatty acids and cholesterol was estimated from two 24-hour recalls (24HR). The variables of lipid profile, anthropometric and clinical data were used in the models of Pearson correlation and linear regression, considering the sexual maturation. The variance ratio of the diet was calculated from the component-person variance, determined by analysis of variance (ANOVA). The definition of the number of days to estimate the usual intake of each nutrient was obtained by taking the hypothetical correlation (r) ≥ 0.9, between nutrient intake and the true observed. We used the principal component analysis as a method of extracting factors that 129 accounted for the dependent variables and known cardiovascular risk obtained from the lipid profile, the index for Castelli I and II, non-HDL cholesterol, BMI, and WC the WHR. Dietary patterns and lifestyle were obtained from the independent variables, based on nutrients consumed and physical activity weekly. In the study of principal component analysis (PCA) was investigated associations between the patterns of cardiovascular risk factors in dietary patterns and lifestyle, age and positive family history of CVD, through bivariate and multiple logistic regression adjusted for sexual maturation. The low HDL-C dyslipidemia was most prevalent (50.5%) for adolescents. Significant correlations were observed between hypercholesterolemia and positive family history of CVD (r = 0.19, p <0.01) and hypertriglyceridemia with BMI (r = 0.30, p <0.01), with the CC (r = 0.32, p <0.01) and WHR (r = 0.33, p <0.01). The linear model constructed with sexual maturation, age and BMI explained about 1 to 10.4% of the variation in the lipid profile. The sources of variance between individuals were greater for all nutrients in both sexes. The reasons for variances were  1 for all nutrients were higher in females. The results suggest that to assess the diet of adolescents with greater precision, 2 days would be enough to R24h consumption of energy, carbohydrates, fiber, saturated and monounsaturated fatty acids. In contrast, 3 days would be recommended for protein, lipid, polyunsaturated fatty acids and cholesterol. Two cardiovascular risk factors as have been extracted in the ACP, referring to the dependent variables: the standard lipid profile (HDL-C and non-HDL cholesterol) and "standard anthropometric index (BMI, WC, WHR) with a power explaining 75% of the variance of the original data. The factors are representative of two independent variables led to dietary patterns, "pattern 130 western diet" and "pattern protein diet", and one on the lifestyle, "pattern energy balance". Together, these patterns provide an explanation power of 67%. Made adjustment for sexual maturation in males remained significant variables: the associations between puberty and be pattern anthropometric indicator (OR = 3.32, CI 1.34 to 8.17%), and between family history of CVD and the pattern lipid profile (OR = 2.62, CI 1.20 to 5.72%). In females adolescents, associations were identified between age after the first stage of puberty with anthropometric pattern (OR = 3.59, CI 1.58 to 8.17%) and lipid profile (OR = 0.33, CI 0.15 to 0.75%). Conclusions: The low HDL-C was the most prevalent dyslipidemia independent of sex and nutritional status of adolescents. Hypercholesterolemia was influenced by family history of CVD and sexual maturation, in turn, hypertriglyceridemia was closely associated with anthropometric indicators. The variance between the diets was greater for all nutrients. This fact reflected in a variance ratio less than 1 and consequently in a lower number of days requerid to estimate the usual diet of adolescents considering gender. The two dietary patterns were extracted and the pattern considered unhealthy lifestyle as healthy. The associations were found between the patterns of CVD risk with age and family history of CVD in the studied adolescents

Estudo do perfil térmico de fornos do tipo "caipira" utilizados pelo setor de cerâmica vermelha em parelhas na região Seridó-RN

The present study aimed to characterize the thermal profile of wood fired oven used by the red ceramic industry in Parelhas, in the Seridó region/RN, aiming to propose structural interventions that can contribute to increasing productivity and product quality, optimize wood consumption and mitigate existing losses during the burning process. The study was conducted at Cerâmica Esperança in the city of Parelhas -RN, Brazil, during the period from August 2012 to September 2013. Four treatments were performed with three replicates, ie, with, a total of 12 experimental units (burnings). In the first stage 4 treatments were performed with three replicates, totaling 12 experimental units (firings). In the second stage 2 treatments were performed with three replications, totaling 6 experimental units (firings). The physical characteristics of the wood were analyzed using standard NBR 11941 and NBR 7190 for basic density and moisture, respectively. The clay was used as a reference parameter for distinguishing treatments. For both the analysis and characterization was carried out using techniques of fluorescence X (XRF) rays, X-ray diffraction (XRD) analysis, particle size analysis (FA). In the first and second stages were monitored: the time during the firing process, the amount of wood used at each firing, the number of parts enfornadas for subsequent determination of the percentages of losses, but also product quality. To characterize the thermal profile of the oven, we measured the temperature at 15 points scored in the surface charge put into the oven. Measurements were taken every 30 minutes from preheat until the end of burning, using a pyrometer laser sight sighting from preheating until the end of burning. In the second step 12 metal cylinders distributed on the oven walls, and the cylinder end walls 8 of the furnace 2 and rollers on each side walls are installed equidistant to 17 cm from the soil and the surface 30 of the wall are installed. The cylinders distributed on the front were placed 50 cm above the furnace, and the base of the oven 20 cm distant from the ground. 10 also thermocouples were installed, and five thermocouples distributed 1.77 cm above the combustion chambers, and one thermocouple on each side, and three thermocouples in front of the oven. We carried out the measurements of the temperatures every 1 hour during the burning two hours in cooling the cylinders with a pyrometer and thermocouples for dattaloger. These were fixed with depth of 30 cm from the wall. After statistical analysis it was found that: the thermal profile of the furnace surface and at different heights was heterogeneous; and the ranges of density and moisture content of wood are within recommended for use as an energy source standards. We conclude that even at low temperatures reached during firing there was a significant production of good quality products, this is due to high concentrations of iron oxide and potassium oxide found in clay, which lowers the melting point of the piece. The average burn time for each step varied 650-2100 minutes wood consumption was on average 20 m3, product quality was on average 16% of first quality, 70% second, third and 5% to 10% loss . The distance between the wire and the surface of the oven was a significant parameter for all treatments, but with different variations, meaning that the wire should not be so generic and unique form, used as a criterion for completion of the burn process. The central part of the furnace was the area that reached higher temperature, and in a unified manner, with the highest concentration of top quality products. The ideal temperature curve, which provided the highest quality of ceramic products was achieved in the central part of the furnace

A Fruticultura Irrigada de pequenos produtores no Baixo-Açu: Uma análise da eficiência de custo

This work has as an objective analyze the efficiency of producers costs of the irrigation Project Baixo-Açu , and identify the determining factors of this efficiency. To achieve these targets it was estimated, in a first stage, a frontier of costs by the method, non parametric of Data Envelopment Analysis-DEA, and measured the stakes of efficiency producers. On the second stage, it was utilized the Tobit regression pattern, estimating an inefficiency function of costs, and were indentified the associated factors of resources waste. Among the results found it was noticed the existence of a high waste of resources, that represent more than 54% of effective cost. Among the factors with the highest wastes are: energy, herbicides, defensives and chemical fertilizers. In a general way, the producers presented low efficiency level and, only, two, of seventy-five researched, achieved the frontier of costs minimization. These results reveal, in a certain way, that the producers in irrigated fruit growing in the project Baixo-Açu don t seek to minimize the production costs. It was still noticed, that the reduction of resources waste, and this way the inefficiency of costs, is associated with the agriculturalist education, his experience in agriculture, his access to the technical assistance and credit

Diferenciais de rendimentos por gênero: uma análise dos efeitos composição e estrutura salarial no Brasil (1976, 1987, 1996 e 2009)

This study aims to analyze the income differentials by gender in Brazil, in the years 1976, 1987, 1996 and 2009. Specifically, there are two objectives. First, attempt to analyze the importance of the effects of composition and wage structure in the job market. In the second, to verify which socioeconomic variables explain the effects of composition and wage structure in the job market. The information in this study was obtained from the microdata of Pesquisa Nacional por Amostra de Domicílios (PNAD) regarding the respective years. In the first stage of the methodology we used: the index of income distribution Theil-T; the income gap decompositions proposed by Oaxaca (1973) and Blinder (1973); and Firpo et al. (2007). In the second stage we applied the RIF regression method (Recentered Influence Function) of Firpo et al. (2007). The results show that income inequality is higher among men than among women in the country. It was observed that the component of inequality between people of the same gender represented the largest share in the decomposition of income inequality between genders. It was found, in the decomposition of the average income, a downward trend of income gap, but the differential remains favorable to the men. We noticed that the impact of the composition effect in reducing the gap was offset by the positive effect of wage structure. Regarding the distribution quantis, income differential between genres appeared greater at the bottom, in the years 1976, 1987 and 2009; and at the top of the distribution, in 1996 featuring, respectively, the sticky floor and glass ceiling effects in Brazil. As for the decomposition of the RIF, it turns out that the composition effect assisted in the downfall of the income gap between 1976 and 2009, but was offset by the positive effect of the wage structure in quantis 10th, 50th, and 90th. The main socioeconomic variables influenced the drop in income gap were: the composition effect, the manual labor occupations, service sector and low-grade and high school, and the wage structure effect, schooling low and high experience professional and technical occupations and urban centers

Reconfigurações industriais das regiões metropolitanas do Nordeste: uma análise a partir do emprego formal

Industrial development experienced by Brazil from the 1950s, changed the concentration of population in the country. The process of development of domestic industry, concentrated in urban areas, crowded growing portion of the population.The Southeast region during the first stage of industrialization driven by the state, with the implementation of Plan goals, captained the major industrial projects implemented in the period and became the main industrial center of the country.In the decade from 1960 to 1980 the state action was marked by numerous regional development projects, softening the industrial concentration and Brazilian investment redirected to the Northeast.The second National Development Plan implemented in the 1970s led to major investments Northeast.This period marked the widespread urban growth and institutionalization of the first metropolitan areas in Brazil.The change of this developmental process is altered with the fiscal and financial crisis of the state in the 1980s and 1990s and spending cuts aimed at national development, reorienting the economy to liberal policies of economic liberalization and reduction of activity in the economy.Industrial policy was relegated to local development plans from the 1990s to the federating units fitting the wide use of tax incentives, the "war tax" to the continued industrialization process.In this context of the national economy work seeks to analyze the industrial setting in the metropolitan areas of Fortaleza, Recife and Salvador between 1995 and 2010.Although the metropolitan areas of Fortaleza, Recife and Salvador are the main urban centers of the Northeast, responsible for the advancement of industrial development, reconfigurations occurred between 1995 and 2010 by changing the level of industrial specialization built by regional division of labor in these regions.The work will be carried out by the method of descriptive analysis of the literature review on regional and urban development.Constitute quantitative method as the secondary data analysis of formal employment from the Annual Social Information (RAIS) Ministry of Labour and Employment (MTE).Using data RAIS / MTE analyzes the industrial specialization index using the Locational Quotient (LQ).Thus, it is assumed as a parameter analysis QL> 1, when the region has become specialized in a particular sector or QL <1, when the region does not have expertise in industrial sector analyzed.The conclusion of study indicates that there was in these metropolitan areas maintained the same bias hub.Fiscal policies, the states, was not successful in diversifying the productive structure and the Northeast region itself.This result is demonstrated by the need and dependence on state investments in the region to promote development.Industrial policies of recent years have been positive to meet the objectives of employment generation, but there must be specific policies for better diversification of production, in addition to integrating the economy of the Northeast sector and regionally

Da representação social do ser professor da EJA à descoberta de seu aluno como referente

Evidence of learning object like representation to social teachings that active in the education of young and adult with the point of view of the ―To be teacher‖ in this modality of teaching, to direct the intention, this research is way, understand the existence of this representation in center acting teachers in the initial periods of the EJA in the Rio Grande do Norte and its reasoning the theories of social representation (MOSCOVICI, 1978, 2003; JODELET, 2001; ABRIC, 1998). We interviewed one hundred and ten (110) teachers who work at schools in the Metropolitan Regions of Natal. We use two procedures: focal group (GATTI, 2005) and multiple classification analysis MCA (ROAZZI, 1995).Thus us with the focal group, attended by eight (08) teachers and seek to know understanding their ideas about EJA, what was possible from the content analysis (BARDIN, 1977; FRANCO, 2007) of the following category: the teacher s view of the EJA context. Developing the MCA, we met twenty (20) teachers in the first stage, free-word association technique FAT (ABRIC, 1998), and ninety in the second stage, including the participants of the focal group. The results of this procedure were submitted to multidimensional analysis and content analysis. The first showed three facets: having and being teacher dimension (ideal), which was about the example teacher s characteristics and behaviors; teacher/ student relation which was about the difficulties and doubts of this relationship as well as its success; at last, conflicting dimension from/ with practice, based on the conflicts experienced by the teachers as EJA workers. Content analysis based on the theme organization from the interpreted data showed four categories: resources to be a teacher which also brought out the definition of an ideal teacher; talk about teaching which disclosed teachers thoughts about the knowledge and being a teacher; obstacles to EJA which showed situations and conditions that prejudice EJA development; and also admission as EJA teacher: viewing reasons which revealed the reasons why teachers went to EJA even though they were formed to deal with children. The conjoint analysis us evidenced the little the dominion of the teachers a participation these search at respect of origin, of the meaning of the character while the singular of EJA modality of teaching the conformation of the social representation from the ―To be‖ on the general vision dissociating with it of inexistence of a social representation of ―to be teacher of the EJA‖ white striking element in the reference at singularity that define the related modality of teaching

Mecanismos sócio-genéticos da representação social de trabalho docente por grupos de licenciandos de física e de química da Universidade Federal do Rio Grande do Norte

This research aims to understand the social representations Teaching Work in groups of undergraduate students of Physics and Chemistry of the Federal University of Rio Grande do Norte. For this, the proposal was based on the three theoretical and methodological consensus Carvalho (2012) in the explanation of socio-genetic mechanisms constituents of dynamic consensus that has functionality to your organization. It Was used to achieve this goal, the theoretical-epistemological Serge Moscovici (1978, 2003), Jodelet (2011), Wagner (1998,( 2011) and Carvalho (2012). The corpus analyzed results from a qualitative and quantitative research, developed in three stages. The first two (2) questionnaires to fifty (50) of each undergraduate course, a questionnaire and another profile for collection of free associations concerning motes inductors "Give Lesson," "Student" and "Teacher". The second step in the procedure Multiple Classifications, Roazzi (1995), aimed for another thirty (30) undergraduate students for each course, as well as Document Analysis of Educational Projects Curriculum courses in Physics and Chemistry. The data analysis of the first stage focused on descriptive statistics and frequency and average order of the words associated with motes inductors. The results from the Multiple Classification Procedure submitted to multidimensional analysis (MSA multidimensional scalogram analysis) and SSA (Similarity Structure Analysis), were interpreted by the theoretical and methodological proposal of the three consensus, supported by analysis of the rhetorical nature of justifications classifications and categorizations of words, boosted in times of application of Procedure Multiple Classification. The data revealed that the groups surveyed were the same Social Representation with specific dynamic consensual. Thinking Teaching Work for these groups it is considered in three dimensions: the BE-DO-HAVE of teaching. In the group of Physics consensus was clear semantic, which expressed a dynamic in which the interpretations of "Teaching Work" peacefully coexist on perceptions of two concepts: An identity around the "BE" "Teacher" or "BE" "Educator" and the other, how they think about professional development. The type of group consensus Chemistry pointed to a consensual logic hierarchical order in which the gradual between the elements of BE-DO-HAVE attested conflicts and disagreements about the perceptual object "Teaching Work", around what value most, whether they are the attributes of personal or professional-technical dimension of teaching, in the course of professional development. The thesis to explain the mechanisms of socio-genetic Representation Social Teaching Work by theoretical and methodological proposal was confirmed

Assistência aos portadores de úlceras venosas: proposta de protocolo

Venous ulcers (VU), recurrent chronic wounds resulting from Chronic Venous Insufficiency (CVI), affect different age groups and would severely affect ambulation of patients. The lesions require treatment lasting and complex and are responsible for significant morbidity and mortality. Thus, this study aims to identify the important aspects covered in the scientific literature protocol for assisting patients with venous ulcers, identifying the issues to be proposed by the judges of the study (nurses, doctors and physiotherapists) to the protocol of care provided to patients venous ulcers and present the structure of protocol proposed by the judges of the study to assist patients with venous ulcers treated at a referral hospital of Rio Grande do Norte. This is a descriptive study using a quantitative approach, carried out at the dressings, located in the outpatient surgical clinic of the Hospital University Onofre Lopes (HUOL), located in East Sanitary District, Natal-RN. The sample consisted of 39 professionals, 30 nurses, seven doctors and two physical therapists, team members HUOL surgical clinic and other public and private institutions of Rio Grande do Norte and Jequié/Bahia. These professionals were the judges responsible for selecting the guidelines already proposed in the literature on VU protocols. Approved by the Ethics in Research HUOL (Report n.o 081/07), began the first stage of the study which consisted of reviewing the scientific literature about the relevant aspects to be included in a protocol for assisting patients with VU. These aspects were organized into a proposed questionnaire to the judges of the study. Following examination, held on the content validation with application of the Kappa (K), accepting a score higher than 0.80 and the Likert Scale, whereas rates from 4.0 to 5.0. The data collected were organized in Microsoft Excel and exported into Statistical Package for Social Sciences (SPSS) 15.0. The literature review included national and international scientific articles, thesis, dissertation and institutional protocols. Regarding the characterization of professional nurses predominated (76.1%), between 34 and 45 years (41.0%), female (79.5%), married/consensual union (46.2%), with specialization in VU care (61.5%), working in the hospital network (46.1%), with up to 5 years experience in VU (69.2%) and claiming to feel prepared to care for these injuries (92.3 %). With regard to aspects that had very good agreement (K ≥ 0.81), remained the items found in the literature with some modifications. In the analysis of the proposed evaluation items had very important, ranging from 4.1 (drug treatment) to 4.9 (patient assessment and care of the injury and the injured and perilesional skin). The proposition of the protocol is arranged in eleven items: A) Evaluation of patient and lesion, B) Registration and documentation, C) the wound and perilesional skin, D) an indication of coverage, E) Use of antibiotic and pain treatment, F) Surgical treatment of CVI, G) Drug treatment, H) Improving venous return and prevetion of recurrence, I) Referral of patients, J) Training and K) Reference and counter reference