Desenvolvimento de Modelos no Programa DigSILENT PowerFactoryTM para o Estudo de Estabilidade Transitória em Sistemas Elétricos de Potência com Aerogerador

This work presents a description of models development at DigSILENT PowerFactoryT M program for the transient stability study in power systems with wind turbine. The main goal is to make available means to use a dynamic simulation program in power systems, widely published, and utilize it as a tool that helps in programs results evaluations used for this intent. The process of simulations and analyses results starts after the models setting description phase. The results obtained by the DigSILENT PowerFactoryT M and ATP, program chosen to the validation also international recognized, are compared during this phase. The main tools and guide lines of PowerFactoryT M program use are presented here, directing these elements to the solution of the approached problem. For the simulation it is used a real system which it will be connected a wind farm. Two different technologies of wind turbines were implemented: doublyfed induction generator with frequency converter, connecting the rotor to the stator and to the grid, and synchronous wind generator with frequency converter, interconnecting the generator to the grid. Besides presenting the basic conceptions of dynamic simulation, it is described the implemented control strategies and models of turbine and converters. The stability of the wind turbine interconnected to grid is analyzed in many operational conditions, resultant of diverse kinds of disturbances

Bolton freeware: aplicativo de avaliação de discrepância de massa dentária desenvolvido pelo programa de pós-graduação em odontologia/UFRN

The calculation of tooth mass discrepancy, essential for good planning and a proper orthodontic finishing, when performed manually, besides being laborious, requires considerable time consumption. The aim of this study was to develop and test Bolton Freeware, a software for analysis of the tooth mass discrepancy of Bolton, aiming to minimize the consumption of time in a less onerous way. The digital analysis of the software was done by means of two-dimensional scanning of plaster study models and compared to manual evaluation (gold standard), using 75 pairs of stone plaster study models divided into two groups according to the magnitude of the Curve of Spee (group I from 0 to 2 mm, group II greater than 2 to 3mm). All the models had permanent dentition and were in perfect condition. The manual evaluation was performed with a digital caliper and a calculator, and the time required to perform the analysis for both methods was recorded and compared. In addition, the software was evaluated by orthodontists regarding its use, by means of questionnaires developed specifically for this purpose. Calibration was performed prior to manual analysis, and excellent levels of inter-rater agreement were achieved, with ICC > 0.75 and r > 0.9 for total and anterior proportion. It was observed in the evaluation of error of the digital method that some teeth showed a significant systematic error, being the highest measured at 0.08 mm. The analysis of total tooth mass discrepancy performed by Bolton Freeware, for those cases in which the curve of Spee is mild and moderate, differ from manual analysis, on average, 0.09 mm and 0.07 mm respectively, for each tooth evaluated, with r> 0, 8 for total and anterior proportion. According to the specificity and sensitivity test, Bolton Freeware has an improved ability to detect true negatives, i.e. the presence of discrepancy. The Bolton analysis digitally performed was faster, with an average difference of time consumed to perform the analysis of Bolton between the two methods of approximately 6 minutes. Most experts interviewed (93%) approved the usability of the software

Análise preditiva a partir da caracterização das emissões gasosas e do óleo lubrificante em frotas com motorização a diesel

This work was motivated by the importance of conducting a study of vehicle emissions in captive fleets with diesel engine, coupled with the predictive maintenance plan. This type of maintenance includes techniques designed to meet the growing market demand to reduce maintenance costs by increasing the reliability of diagnoses, which has increased interest in automated predictive maintenance on diesel engines, preventing problems that might evolve into routine turn into serious situations, solved only with complex and costly repairs, the Reliability Centered Maintenance, will be the methodology that will make our goal is reached, beyond maintaining the vehicles regulated as fuel consumption and emissions. To Therefore, technical improvements were estimated capable of penetrating the automotive market and give the inshore fleet emission rates of opacity of the vehicles, being directly related to the conditions of the lubricating oil thus contributing to reducing maintenance costs by contributing significantly to emissions of pollutants and an improvement in the air in large cities. This criterion was adopted and implemented, em 241 buses and produced a diagnosis of possible failures by the correlation between the characterization of used lubricating oils and the analysis of opacity, with the objective of the aid the detection and solution of failures for the maintenance of sub-systems according to design criteria, and for this to be a deductive methodology to determine potential causes of failures, has been automated to implement a predictive maintenance system for this purpose was used in our study a mobile unit equipped with a opacimeter and a kit for collection and analysis of lubricating oil and the construction of the network diagnostics, we used a computer program in Microsoft Office Access 2007 platform tool is indispensable for creating a database data, this method is being used and successfully implemented in seven (7) bus companies from the city of Natal (RN) Brazil

Otimização de um sistema de distribuição predial de água fria: estudo de caso

This dissertation presents a methodology to the optimization of a predial system of cold water distribution. It s about a study of a case applied to the Tropical Buzios Residential Condominium, located in the Búzio s Beach, Nísia Floresta city, the east coast of the Rio Grande do Norte state, twenty kilometers far from Natal. The design of cold water distribution networks according to Norm NBR 5626 of the ABNT - Brazilian Association of Techniques Norms, does not guarantee that the joined solution is the optimal solution of less cost. It s necessary the use of an optimization methodology, that supplies us, between all the possible solutions, the minimum cost solution. In the optimization process of the predial system of water distribution of the Tropical Búzios Condominium, is used Method Granados, that is an iterative algorithm of optimization, based on the Dynamic Programming, that supplies the minimum cost s network, in function of the piezometric quota of the reservoir. For the application of this Method in ramifies networks, is used a program of computer in C language. This process is divided in two stages: attainment of the previous solution and reduction of the piezometric quota of headboard. In the attainment of the previous solution, the minors possible diameters are used that guarantee the limit of maximum speed and the requirements of minimum pressures. The piezometric quota of headboard is raised to guarantee these requirements. In the second stage of the Granados Method, an iterative process is used and it objective is to reduce the quota of headboard gradually, considering the substitution of stretches of the network pipes for the subsequent diameters, considering a minimum addition of the network cost. The diameter change is made in the optimal stretch that presents the lesser Exchange Gradient. The process is locked up when the headboard quota of desired is reached. The optimized network s material costs are calculated, and is made the analysis of the same ones, through the comparison with the conventional network s costs

Os Polímeros como Sistemas Complexos

Neste trabalho, através de simulações computacionais, identificamos os fenômenos físicos associados ao crescimento e a dinâmica de polímeros como sistemas complexos exibindo comportamentos não linearidades, caos, criticalidade auto-organizada, entre outros. No primeiro capítulo, iniciamos com uma breve introdução onde descrevemos alguns conceitos básicos importantes ao entendimento do nosso trabalho. O capítulo 2 consiste na descrição do nosso estudo da distribuição de segmentos num polímero ramificado. Baseado em cálculos semelhantes aos usados em cadeias poliméricas lineares, utilizamos o modelo de crescimento para polímeros ramificados (Branched Polymer Growth Model - BPGM) proposto por Lucena et al., e analisamos a distribuição de probabilidade dos monômeros num polímero ramificado em 2 dimensões, até então desconhecida. No capítulo seguinte estudamos a classe de universalidade dos polímeros ramificados gerados pelo BPGM. Utilizando simulações computacionais em 3 dimensões do modelo proposto por Lucena et al., calculamos algumas dimensões críticas (dimensões fractal, mínima e química) para tentar elucidar a questão da classe de universalidade. Ainda neste Capítulo, descrevemos um novo modelo para a simulação de polímeros ramificados que foi por nós desenvolvido de modo a poupar esforço computacional. Em seguida, no capítulo 4 estudamos o comportamento caótico do crescimento de polímeros gerados pelo BPGM. Partimos de polímeros criticamente organizados e utilizamos uma técnica muito semelhante aquela usada em transições de fase em Modelos de Ising para estudar propagação de danos chamada de Distância de Hamming. Vimos que a distância de Hamming para o caso dos polímeros ramificados se comporta como uma lei de potência, indicando um caráter não-extensivo na dinâmica de crescimento. No Capítulo 5 analisamos o movimento molecular de cadeias poliméricas na presença de obstáculos e de gradientes de potenciais. Usamos um modelo generalizado de reptação para estudar a difusão de polímeros lineares em meios desordenados. Investigamos a evolução temporal destas cadeias em redes quadradas e medimos os tempos característicos de transporte t. Finalizamos esta dissertação com um capítulo contendo a conclusão geral denoss o trabalho (Capítulo 6), mais dois apêndices (Apêndices A e B) contendo a fenomenologia básica para alguns conceitos que utilizaremos ao longo desta tese (Fractais e Percolação respectivamente) e um terceiro e ´ultimo apêndice (Apêndice C) contendo uma descrição de um programa de computador para simular o crescimentos de polímeros ramificados em uma rede quadrada

Avaliação e monitoramento de políticas públicas: criação de um modelo sistêmico aplicado ao Instituto de Assistência Técnica e Extensão Rural do Rio Grande do Norte (EMATER-RN)

The nature of this thesis is interventionist and aims to create an alternative on how to control and evaluate the public policies implementation developed at the Institute for Technical Assistance and Rural Extension of Rio Grande do Norte State. The cenarium takes place in a public institution , classified as a municipality that belongs to the Rio Grande do Norte government and adopts the design science research methodology , where it generates a set of artifacts that guide the development of a computerized information system . To ensure the decisions, the literature was reviewed aiming to bring and highlight concepts that will be used as base to build the intervention. The use of an effective methodology called Iconix systems analysis , provides a software development process in a short time . As a result of many artifacts created by the methodology there is a software computer able of running on the Internet environment with G2C behavior, it is suggested as a management tool for monitoring artifacts generated by the various methods. Moreover, it reveals barriers faced in the public companies environment such as lack of infrastructure , the strength of the workforce and the executives behavior

Detecção de predadores por dicromatas e tricromatas humanos e a sua implicação na evolução da visão de cores em primatas

Among placental mammals, primates are the only ones to present trichromatic color vision. However, the distribution of trichromacy among primates is not homogeneous: Old World primates shows an uniform trichromacy (with all individuals being trichromats) and New World primates exhibit a color vision polymorphism (with dichromatic males and dichromatic or trichromatic females). Visual ecology studies have investigated which selective pressures may have been responsible for the evolution of trichromacy in primates, diverging from the dichromat standard found in other mammals. Cues associated with foraging and the socio-reproductive status were analyzed, indicating a trichromatic advantage for the rapid detection of visually conspicuous objects against a green background. However, dichromats are characterized by an efficient capture of cryptic and camouflaged stimuli. These advantages regarding phenotype may be responsible for the maintenance of the visual polymorphism in New World primates and for the high incidence of color blindness in humans (standing around 8% in Caucasian men). An important factor that has not yet been experimentally taken into account is the predation risk and its effect on the evolution of trichromacy in primates. To answer this question, we prepared and edited pictures of animals with different coats: oncillas (Leopardus spp.), puma (Puma concolor) and ferret (Galictis cuja). The specimens were taxidermized and the photographs were taken in three different vegetation scenarios (dense forest, cerrado and grassland). The images of the predators were manipulated so that they fit into two categories of stimulus size (small or large). After color calibration and photo editing, these were presented to 40 humans (20 dichromats and 20 trichromats) by a computer program, which presented a set of four photos at a time (one picture containing the taxidermized animal amid the background vegetation and three depicting only the background vegetation) and recorded the response latency and success rate of the subjects. The results show a trichromatic advantage in detecting potential predators. The predator detection was influenced by the background, the predator species, the dimension of the stimulus and the observer s visual phenotype. As humans have a high rate of dyschromatopsias, when compared to wild Catarrhini or human tribal populations, it is possible that the increased rate of dichromats is a result of reduced pressure for rapid predator detection. Since our species came to live in more cohesive groups and resistant to attack by predators, with the advent of agriculture and the formation of villages, it is possible that the lower risk of predation has reduced the selection in favor of trichromats

O computador no ensino de lígnua inglesa no CEFET/RN

The present study has as goal to analyze the aplicability of the computational technology as mediator in the english-speaking teaching in the Centro Federal de Educação Tecnológica do Rio Grande do Norte-CEFET/RN. The object of study was centered in the use of the computer incorporated in the teaching of English by four institution groups. The research was ruled metodologically in the study of case, adopting a qualitative and quantitative boarding of interpretative-reflexive mark. We support ourselves on a bibliographical literature revision that cares of the use of the computational technology matter into the class-room, aiming an education new practice, regarding the current reality conceptions in what we live in the technological education. We also use a referencial for a pedagogical action, trying to offer subsidies for a practice that provides the knowledges generation through the interaction, aiming a subject reflexive and critical education. For materialization of this study, we used esrutuctured action, as interviews for the teachers and students, besides the observations of the dayly in class-room, in order to get the necessary datas for analysis. During this study, we oserved that the use of the computer, while pedagogical support instrument in the english-speaking teaching, has acted like mediator of the teaching-learning process. The results demonstrate use of the computer use has been each more a practice adopted by other institution languages teachers. The conclusions confirm the hypothesis showed at the beginning of the work and evidence that the teachers are warden of forming thinking, reflexive and critical subjects. For that, they need to be prepared to face situations in which they can take the pedagogical practice to tune with the technological advances, consequently providing an effective technological education

Formação de professores, saberes, reflexividade e apropriação da cultura digital no Projeto Um Computador por Aluno (UCA)

This study investigates teacher training and cognitive practice of teachers in a Basic Education school that adopted the Project One Computer per Student (OCS) in their school routine. Its relevance consists in provide directions for the continuation of training activities on the Project and guide the teachers with their pedagogical practices using the laptop model one to one. The thesis defended is that the educator formation for social using of digital media (specially the laptops from the Project UCA) gives space to establish new sociotechnical relationships, of new social and professionals practices, new identitary components and a process of reflexivity and knowledge reconstruction to teach. We reaffirm the importance of reflexivity and appropriation of digital culture for the better development of teaching practice using the Information and Communication Technologies (ICTs), giving focus to the aspects of social and professional use of the technology. The study is part of the qualitative aspect and is a procedural tracking based on principles of ethnographic research. As procedures and methodological tools, were used: intensive observation of school environments, documental analysis, focal group, semi-structured questionnaires and semi-structured individual interviews. The research was held in a public school in the city of Parnamirim - RN. The subject sample relates to 17 teachers, coming from the elementary school I and II, Youth and Adult Education and High School, who went through the process of training UCA and having entered the laptops in their teaching. The research corpus is structured based on the messages built into the process of data collection and is analyzed based on principles of Content Analysis, specified by Laurence Bardin (2011). Was taken as theoretical reference studies by Tardif (2000; 2011), Pimenta (2009), Gorz (2004, 2005), Giddens (1991), Dewey, J. (1916), Boudieu (1994; 1999), Freire (1996; 2005), among others. The analysis indicates a process of reconstruction / revision of knowledge to teach and work in digital culture, being these knowledges guided by the experience of the subjects investigated. The reconstructed knowledges will be revealed from a categorization process. The following groups of knowledges: "technical knowledges", "didactic-methodological knowledges and knowledges of professionalization" were built on the assumption of ownership of digital culture in the educational context. The analysis confirms the appearance of new ways of sociability when acquiring other forms of acting and thinking ICTs, despite the environment adverse to the reflexivity shared among the teachers. Also reveals, based on the ownership concept present on the data analysis, the construction of meanings of belonging and transformation of individuals into social routes from the interweaving of the teaching practice with the digital culture. Emphasizes, finally, the importance of a training for use of ICTs that exceeds the instrumentation, in other words, what we call "technical knowledges", but taking on its structural basis the shared reflection, the opening for the ressignificance (new meaning) and reconstruction of new knowledges and practices and that really allows, to the teacher, the living of an experience capable of providing socio-technical transformations of their relationships

Um sistema inteligente de classificação de sinais de EEG para Interface Cérebro-Computador

The Brain-Computer Interfaces (BCI) have as main purpose to establish a communication path with the central nervous system (CNS) independently from the standard pathway (nervous, muscles), aiming to control a device. The main objective of the current research is to develop an off-line BCI that separates the different EEG patterns resulting from strictly mental tasks performed by an experimental subject, comparing the effectiveness of different signal-preprocessing approaches. We also tested different classification approaches: all versus all, one versus one and a hierarchic classification approach. No preprocessing techniques were found able to improve the system performance. Furthermore, the hierarchic approach proved to be capable to produce results above the expected by literature

Interfaces cérebro-computador: estudo, design e desenvolvimento do jogo AdmiralMind Battleship

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior