15 resultados para Curto-circuitos
em Universidade Federal do Rio Grande do Norte(UFRN)
Resumo:
Equipment maintenance is the major cost factor in industrial plants, it is very important the development of fault predict techniques. Three-phase induction motors are key electrical equipments used in industrial applications mainly because presents low cost and large robustness, however, it isn t protected from other fault types such as shorted winding and broken bars. Several acquisition ways, processing and signal analysis are applied to improve its diagnosis. More efficient techniques use current sensors and its signature analysis. In this dissertation, starting of these sensors, it is to make signal analysis through Park s vector that provides a good visualization capability. Faults data acquisition is an arduous task; in this way, it is developed a methodology for data base construction. Park s transformer is applied into stationary reference for machine modeling of the machine s differential equations solution. Faults detection needs a detailed analysis of variables and its influences that becomes the diagnosis more complex. The tasks of pattern recognition allow that systems are automatically generated, based in patterns and data concepts, in the majority cases undetectable for specialists, helping decision tasks. Classifiers algorithms with diverse learning paradigms: k-Neighborhood, Neural Networks, Decision Trees and Naïves Bayes are used to patterns recognition of machines faults. Multi-classifier systems are used to improve classification errors. It inspected the algorithms homogeneous: Bagging and Boosting and heterogeneous: Vote, Stacking and Stacking C. Results present the effectiveness of constructed model to faults modeling, such as the possibility of using multi-classifiers algorithm on faults classification
Resumo:
The objective of the present work is develop a model to simulate electrical energy networks in transient and stead states, using the software ATP (Alternative Transient Program), able to be a way to join two distinct themes, present in classical methodology planning networks: short circuit analysis and load flow theory. Beyond that, using a tool for relay simulation, this paper intend to use the new developed model to investigate the influence of transient phenomenon in operation of protection relays, and calibrate the enterprise's protections relays. For testing the model, some relays, actually, installed at COSERN were used
Resumo:
This work has as main objective to show all the particularities regarding the Three-phase Power Summation Method, used for load flow calculation, in what it says respect to the influence of the magnetic coupling among the phases, as well as to the losses presented in all the existent transformers in the feeder to be analyzed. Besides, its application is detailed in the study of the short-circuits, that happen in the presence of high impedance values, which possess a problem, that is its difficult detection and consequent elimination on the part of common devices of protection. That happens due to the characteristic presented by the current of short¬ circuit, in being generally of the same order of greatness that the load currents. Results of simulations accomplished in several situations will be shown, objectifying a complete analysis of the behavior of the proposed method in several types of short-circuits. Confront of the results obtained by the method with results of another works will be presented to verify its effectiveness
Resumo:
The use of flexible materials for the development of planar circuits is one of the most desired and studied characteristics, lately, by researchers. This happens because the flexibility of the substrate can provide previously impracticable applications, due to the rigidity of the substrates normally used that makes it difficult to fit into the circuits in irregular surfaces. The constant interest in recent years for more lighter devices, increasingly more compacts, flexible and with low cost, led to a new line of research of great interest from both academic and technological views, that is the study and development of textile substrates that can be applied in the development of planar circuits, for applications in the areas of security, biomedical and telecommunications. This paper proposes the development of planar circuits, such as antennas , frequency selective surfaces (FSS) and planar filters, using textile (cotton ticking, jeans and brim santista) as the dielectric substrate and the Pure Copper Polyester Taffeta Fabric, a textile of pure copper, highly conductive, lightweight and flexible, commercially sold as a conductive material. The electrical characteristics of textiles (electric permittivity and loss tangent) were characterized using the transmission line method (rectangular waveguide) and compared with those found in the literature. The structures were analyzed using commercial software Ansoft Designer and Ansoft HFSS, both from the company Ansys and for comparison we used the Iterative Method of Waves (WCIP). For the purpose of validation were built and measured several prototypes of antennas, planar filters and FSS, being possible to confirm an excellent agreement between simulated and measured results
Resumo:
This work proposes a new methodology to verify those analog circuits, providing an automated tools to help the verifiers to have a more truthful result. This work presents the development of new methodology for analog circuits verification. The main goal is to provide a more automated verification process to certify analog circuits functional behavior. The proposed methodology is based on the golden model technique. A verification environment based on this methodology was built and results of a study case based on the validation of an operational amplifier design are offered as a confirmation of its effectiveness. The results had shown that the verification process was more truthful because of the automation provided by the tool developed
Resumo:
The planar circuits are structures that increasingly attracting the attention of researchers, due the good performance and capacity to integrate with other devices, in the prototyping of systems for transmitting and receiving signals in the microwave range. In this context, the study and development of new techniques for analysis of these devices have significantly contributed in the design of structures with excellent performance and high reliability. In this work, the full-wave method based on the concept of electromagnetic waves and the principle of reflection and transmission of waves at an interface, Wave Concept Iterative Procedure (WCIP), or iterative method of waves is described as a tool with high precision study microwave planar circuits. The proposed method is applied to the characterization of planar filters, microstrip antennas and frequency selective surfaces. Prototype devices were built and the experimental results confirmed the proposed mathematical model. The results were also compared with simulated results by Ansoft HFSS, observing a good agreement between them.
Resumo:
Low voltage solar panels increase the reliability of solar panels due to reduction of in series associations the configurations of photovoltaic cells. The low voltage generation requires DCDC converters devices with high efficiency, enabling raise and regulate the output voltage. This study analyzes the performance of a photovoltaic panel of Solarex, MSX model 77, configured to generate an open circuit voltage of 10.5 V, with load voltage of 8.5 V, with short circuit current of 9 A and a power of 77 W. The solar panel was assembled in the isolated photovoltaic system configuration, with and without energy storage as an interface with a DCDC converter, Booster topology. The converter was designed and fabricated using SMD (Surface Mounted Devices) technology IC (integrated circuit) that regulates its output voltage at 14.2 V, with an efficiency of 87% and providing the load a maximum power of 20.88 W. The system was installed and instrumented for measurement and acquisition of the following data: luminosities, average global radiation (data of INPE Instituto Nacional de Pesquisas Espaciais), solar panel and environment temperatures, solar panel and DC-DC converter output voltages, panel, inverter, and battery charge output currents. The photovoltaic system was initially tested in the laboratory (simulating its functioning in ideal conditions of operation) and then subjected to testing in real field conditions. The panel inclination angle was set at 5.5°, consistent with the latitude of Natal city. Factors such as climatic conditions (simultaneous variations of temperature, solar luminosities and ra diation on the panel), values of load resistance, lower limit of the maximum power required by the load (20.88 W) were predominant factors that panel does not operate with energy efficiency levels greater than 5 to 6%. The average converter efficiency designed in the field test reached 95%
Resumo:
Even nowadays there is in Brasil a large number of edentulous and a precarious financial condition of most of the population. In addition, World Health Organization aims for oral health, which consists on the maintenance of a natural dentition, functional and aesthetic composed of at least 20 teeth, without need of prosthetic intervention throughout life. From this and considering the lack of researches about the permanence of edentulous spaces in the oral cavity, and also avoiding overtreatment, this research has been proposed. Thus, the aim was to evaluate the effect of different lengths of the shortened lower dental arch in the presence or absence of a removable partial denture (RPD) on masticatory function, quality of life and occurrence of temporomandibular dysfunction. To achieve this goal, we compared the masticatory efficiency (colorimetric test), the oral comfort through the analysis of the impact of oral health in quality of life (OHIP-14), the presence of temporomandibular dysfunction (RDC/TMD) and the general quality of life (WHOQOL) of patients with shortened dental arches (SDA) (n=60), which is an arch with a reduction of teeth starting posteriorly, and patients with complete dental arch (Complete DA) (n = 34). The group of patients whit SDA was divided among PPR wears (PPD + SDA) (n = 17) and non-wears (n = 43). The population of this study consisted on patients who received or looked for treatment at the clinics of the Department of Dentistry of UFRN, from clinical analysis and records. The sample was chosen by convenience. For statistical analysis, it was a database in SPSS 17.0, followed by descriptive analysis with frequencies, absolute values, tests of central tendency and variability. The statistical tests used were chi-squared and analysis of variance as well as Tukey s post test, when applicable, all with a 95% confidence level. The results shown a prevalence of TMD of 47,1% among patients using PRP and 69,8% among those who didn t, but this result wasn t statistically significant. The mean of the results of masticatory efficiency, WHOQOL and OHIP didn t show association to the presence or absence of PPR and to the lower number of occlusal units of the patients (0, 1, 2 or more occlusal). The association only occurred among the different groups of SDA and the patients with complete dental arch. Taking into account the results, it could be observed that studied patients with low posterior support using lower PRP didn t have better masticatory efficiency, general quality of life, less impacts of their oral conditions in quality of life or not even less temporomandibular dysfunction or better masticatory efficiency when compared to those who didn t use the prosthesis
Resumo:
Down syndrome (DS) is one of the most frequent causes of intellectual disability, affecting one in every 600 to 1000 live births. Studies have demonstrated that people with DS have a lower capacity for short-term memory (STM) and working memory (WM), which affects their capability to learn new words and to follow spoken instructions, specially when they involve multiple information or consecutive orders/orientations. It seems that the basis of the learning process, as it happens with language and mathematics comprehension and reasoning, relies in the STM and WM systems. Individuals with DS are increasingly included in mainstream education, and yet, very few researches have been conducted to investigate the influence of memory development and the type of enrollment (regular school and special school). This study investigated the relationship between the type of school enrollment with the performance on STM tests and also, the relationship of this performance with early stimulation (ES). The tests used in the first research were the digit span, free recall, word recognition and subtests of the Wechsler Intelligence Scale for Children Third Edition (WISC-III). Individuals enrolled in the regular schools group had higher scores on the digit span test and the subtests of the WISC-III. In the free recall and recognition tests, no differences were found. This study indicates that the type of enrollment might influence the memory development of individuals with DS and clearly points the need for future investigations. In the second research, the tests used were the digit span, free word recall and subtests of the WISC-III. The test results showed better performance by adults that received ES before six months of age. The studies showed improvement in STM both in people who attended or were attending regular school, as well as those who benefited from ES before six months of age. However, some issues still need to be better understood. What is the relation between this stimulation with the individual s education? Since ES may reflect a greater family involvement with the individual, what is the role of emotional components derived from this involvement in the cognitive improvement? These and other questions are part of the continuity of this study
Resumo:
Multi-objective combinatorial optimization problems have peculiar characteristics that require optimization methods to adapt for this context. Since many of these problems are NP-Hard, the use of metaheuristics has grown over the last years. Particularly, many different approaches using Ant Colony Optimization (ACO) have been proposed. In this work, an ACO is proposed for the Multi-objective Shortest Path Problem, and is compared to two other optimizers found in the literature. A set of 18 instances from two distinct types of graphs are used, as well as a specific multiobjective performance assessment methodology. Initial experiments showed that the proposed algorithm is able to generate better approximation sets than the other optimizers for all instances. In the second part of this work, an experimental analysis is conducted, using several different multiobjective ACO proposals recently published and the same instances used in the first part. Results show each type of instance benefits a particular type of instance benefits a particular algorithmic approach. A new metaphor for the development of multiobjective ACOs is, then, proposed. Usually, ants share the same characteristics and only few works address multi-species approaches. This works proposes an approach where multi-species ants compete for food resources. Each specie has its own search strategy and different species do not access pheromone information of each other. As in nature, the successful ant populations are allowed to grow, whereas unsuccessful ones shrink. The approach introduced here shows to be able to inherit the behavior of strategies that are successful for different types of problems. Results of computational experiments are reported and show that the proposed approach is able to produce significantly better approximation sets than other methods
Resumo:
Cette étude a été fondée sur la reconaissance, la description et l'analyse du circuit spatial de la production de l activité des fabriques des casquettes dans la région du Seridó Potiguar. L activité des fabriques des casquettes est située dans les villes de Caicó, Serra Negra do Norte e São José do Seridó, qui forment le pôle de fabriques de casquettes, composé de soixante-quatre (64) unités de fabrication, le deuxième plus grand producteur de casquettes au Brésil. Dans la condition de base géographique, l'opérationnalisation du concept de circuits spatiales de la production a été essentielle à la compréhension de l'utilisation du territoire et de l'indivisibilité de l'espace, du fournisseur de matières premières au consommateur final, comprenant les étapes des matières premières, la main-d'oeuvre, le stockage, les transports, le commerce et la consommation dans la période actuelle, dans laquelle les instances de la production, la circulation, la distribution et de la consommation sont spatialement diffus. Sur la base de l'identification et de la localisation de ces étapes et des principaux acteurs impliqués dans la activité des fabriques de casquettes, une configuration de circuit spatial de la production a été élaborée, en s'interprétant l'utilisation des territoires par les instances productives. L'interprétation des étapes de production a identifié que les entreprises liées à l'Association Seridoense des Fabricants de Casquettes agissent plus efficacement sur le territoire que celles nonassociées, alors que toujours elles investissent dans des nouveaux équipements, en augmentant sa puissance technique pour se renforcer avant un marché si compétitif comme celui des casquettes. En examinant la contribution de la fabrication des casquettes à l'utilisation actuelle des territoires de la coupe, nous avons appris que les activités complémentaires et des matières premiéres nécessaires à sa réalisation se trouvent dans leur environnement géographique. Ainsi, la proximité spatiale entre les étapes de la fabrication des casquettes fait entrevoir la matérialité du territoire, conférée dans la coexistence des techniques passées et présentes, et l'ensemble des actions effectuées par un certain nombre de travailleurs sociaux qui collaborent à la création du circuit spatial de la production de l activité des fabriques des casquettes. Cette étude a confirmé que les fabriques des casquettes sont organisées sous la forme de cellules de production, continues ou discontinues, dont les équipements et les machines à coudre industrielles obéissent à la logique d'une production de plus en plus standardisée. Ce circuit spatial de la production contribue à l'utilisation actuelle des territoires de Caicó, Serra Negra do Norte et de São José do Seridó car il amplifie le mouvement du commerce et des relations entre les lieux, à travers la dynamique des flux des personnes, des biens et des produits, en constante circulation, guidées par la division du travail entre les étapes productives
Resumo:
The Feira da Pedra is an extension of the open fair of São Bento in the State of Paraiba. It is a system of trade in textile goods produced by textile industry in manufacturing of hammocks and derivatives of this industry, present in some cities in the state of Paraiba and Rio Grande do Norte, as a survival strategy, inserted in the list of tertiary and retail of the urban economics of this city. It is thereby aimed to discuss about the urban economics, reflecting on the open fair system from the two circuits of urban economy, mainly in the context of the dynamics of the current period of geographic space, the technical-scientific-informational period, as the specific empirical object, the Feira da Pedra of São Bento (PB). For this, this research was carried out in two stages of operation: a) surveys of secondary data and b) primary data collection which were reported an operational triad: I) literature; II) documentary research, and III) research of field. The presence of the Feira da Pedra in São Bento has shown us one of the most important characteristics of this city, in order to present major economic, social and cultural benefits to the local population, and contribute to (re) production of sertanejo space, making lower part of the circuit of its urban economy. This activity has entailed several dynamics for urban space in this city, mainly because of attracting large numbers of people, carrying typical actions of its relationship with the urban space are são-bentense and built environment. Thus, its importance is not only a local and regional phenomenon, but also a cultural reference of a place in the geographical area of many paraibanos and norte-rio-grandenses subjects, as the case of this activity has brought to its weekly routine, this product resulting from the textile working of this area of Sertão Paraibano and Seridó Potiguar
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
Resumo:
Ethanol withdrawn individuals present a wealth of signs and symptoms, some of them related with anxiety. To better understand brain areas involved in anxiety caused by ethanol abstinence, preclinical studies have been employing models of ethanol consumption followed by withdrawal in rodents submitted to behavioral tests of anxiety, such as the elevated plus-maze. The aim of this study was to investigate if short- or long-term ethanol withdrawal could alter both anxiety-related behaviors in the elevated plus-maze (EPM) and open field tests and the number of serotonin immunorreactive cels in the dorsal raphe nucleus, a midbrain area associated with anxiety. Female Wistar rats (90 days old) were submitted to increasing concentrations of ethanol (2% for 3 days, 4% for 3 days and 6% for 15 days) as the only source of liquid diet and the control group received water ad libitum. Both groups received food ad libitum. In the behavioral experiments, on 21st day of consumption, ethanol was substituted by water (withdrawal) and 72 h or 21 days after withdrawal animals were submitted to the EPM, where it was evaluated the percentage of time and entries in the open arms and the entries in the enclosed arms during 5 minutes. Twenty and four hours after testing in the EPM, animals were submitted to the open field test for 15 minutes, where the distance traveled by the animals was observed along this period. During the first 5 minutes, the distance traveled, entries and time spent in the center of the test were analyzed. In the immunohistochemistry study, animals were submitted to 21 days of consumption of ethanol followed or not by 72 hours and 21 days of withdrawal previously perfusion, brain tissue preparation and quantification of serotonin dyed cells in the dorsal and caudal portions in the dorsal raphe nucleus. Behavioral data showed that both short- and long-term ethanol withdrawals reduced the open arms exploration in the EPM. In the open field test there were no locomotor activity changes during the total 15 minutes; however, longterm ethanol withdrawal reduced the exploration in the center of the open field during the first 5 minutes. In the immunohistochemistry step, there were no differences, when short- and long-term withdrawn groups were compared with control group; nevertheless, the chronic consumption of ethanol decreased the number of serotonergic immunorreactive cells in the dorsal part of dorsal raphe nucleus. Taken together, results here obtained suggest that both short- and long-term ethanol withdrawals promoted an anxiogenic-like effect that was not related with changes in the serotonin immunorreactivity in the dorsal and caudal parts of the dorsal raphe nucleus.
Resumo:
The present study aims to analyze the spatial organization of the Ribeira district in Natal/ RN from the two circuits of the urban economy. For its realization, was used the bibliographical, documentary and field research. From the information collected in the field research and of secondary data was elaborated the maps, tables, graphics, frames and photographic collections. In the analysis of the results identified the presence of two circuits of the urban economy in the said neighborhood, thus as the predominance of the upper circuit compared to the lower circuit between the surveyed establishments, well as the role that each of the circuits represents to their spatial organization. Some variables such as technology, organization, information, publicity and consumption were important to establish the main differences between the circuits.