4 resultados para Crutch transducer
em Universidade Federal do Rio Grande do Norte(UFRN)
Resumo:
This work was originated through the results of the analysis of the services for the needs of people with disabilities that were permitted by the physical space of two schools of the municipality of Natal/RN. The general objective/goal was to subsidize the elaboration of alternatives for the planning of environments that could be used by any person. The study used the empirical research through the adoption of a multimethod approach including: (i) technical visits oriented by the NBR 9050, (ii) contact with users that have reduced mobility (visually impaired and wheelchair or crutch users) through escorted travels and interviews, and (iii) interview with school managers. The evidence from the research, even though with significant development of laws that guarantee people with disabilities their right to citizenship, the physical environment of our schools still present with many obstacles that prevent the mobility of people with disabilities which proves their lack of readiness to accommodate them. Therefore, the actions taken to address the accessibility has been the adoption of temporary solutions that makes the adaptation more difficult, adds obstacles and reinforces the undesirable segregation, however still very present in our society. Finally, there is the indication that in order to achieve the spatial configuration that promotes social contact and integration in between the persons with different physical status, it is necessary to completely comprehend the activities developed in each space, from the conception of the equipment to the individual learning needs, having in mind creating environments that stimulates the execution of the tasks in an independent manner without the assistance of others. The inclusion regarding attention to accessibility in the decision making process, directed to the arquitectural and urban project, would decrease the constant need to redevelop and adapt spaces, and should be definitely incorporated as an important component in the production of space
Resumo:
The management of water resources in the river basin level, as it defines the Law nº 9433/97, requires the effective knowledge of the processes of hydrological basin, resulting from studies based on consistent series of hydrological data that reflect the characteristics of the basin. In this context, the objective of this work was to develop the modeling of catchment basin of the river Jundiaí - RN and carry out the study of attenuation of a flood of the dam Tabatinga, by means of a monitoring project of hydrological data and climatology of the basin, with a view to promoting the development of research activities by applying methodologies unified and appropriate for the assessment of hydrological studies in the transition region of the semiarid and the forest zone on the coast of Rio Grande do Norte. For the study of the hydrological characteristics of the basin was conducted the automatic design of the basin of the river Jundiaí, with the aid of programs of geoprocessing, was adopted a hydrological model daily, the NRCS, which is a model determined and concentrated. For the use of this model was necessary to determine some parameters that are used in this model, as the Curve Number. Having in mind that this is the first study that is being conducted in the basin with the employment of this model, it was made sensitivity analysis of the results of this model from the adoption of different values of CN, situated within a range appropriate to the conditions of use, occupation and the nature of the soil of this basin. As the objective of this study was also developing a simulation model of the operation of the Tabatinga dam and with this flood control caused in the city of Macaíba, it was developed a mathematical model of fluid balance, developed to be used in Microsoft Excel. The simulation was conducted in two phases: the first step was promoted the water balance daily that allowed the analysis of the sensitivity of the model in relation to the volume of waiting, as well as the determination of the period of greatest discharges daily averages. From this point, it was assumed for the second stage, which was in the determination of the hydrograph of discharges effluent slots, that was determined by means of the fluid balance time, on the basis of the discharges effluents generated by a mathematical equation whose parameters were adjusted according to the hydrograph daily. Through the analyzes it was realized that the dam Tabatinga only has how to carry out the attenuation of floods through the regularization of the volume of waiting, with this there is a loss of approximately 56.5% on storage capacity of this dam, because for causing the attenuation effect of filled the shell of this dam has to remain more than 5m below the level of the sill, representing at least 50.582.927m3. The results obtained with the modeling represents a first step in the direction of improving the level of hydrological information about the behavior of the basins of the semiarid. In order to monitor quantitatively the hydrographic basin of the river Jundiaí will be necessary to install a rain gauge register, next to the Tabatinga dam and a pressure transducer, for regular measurements of flow in the reservoir of the dam. The climatological data will be collected in full automatic weather station installed in Agricultural School Jundiaí
Resumo:
In this work, the objective in study was the development of a biossensor potencyometric for urea detection, starting from the extracted urease of soy grains. Initially, was made a chemometrics study, through a planning factorial 24, objectified to find great conditions for the extraction of the urease without its properties were affected. Starting from this study, the best conditions were determined for the obtaining of rich extracts in urease, allowing the biossensors making with good characteristics. These were made using a platinum electrode as transducer with the dispersed urease in chitosan head office and reticulated in glutaraldehyde vapor. The biossensors obtained presented a limit of urea detection the same to 0,33 mM and lineal strip between 0,33 and 3 mM of the substratum. The time of answer was considered loud, mainly, in low concentrations of the substratum, where it was taken about 5 minutes by analysis. For high concentrations that time was reduced for not more than one minute. The time of life was limited by the adherence of the enzymatic membrane to the transducer, but it was possible to maintain the biossensor with operation for one month with about 50 accomplished measures. Application of the biossensor for analyses of fertilizers to the urea base presented excellent result for a sample with few interfering, but it was different when the used fertilizer was originating from of a complex sample. Even so the label was not expressed the text of nitrogen it was totally coming of the urea. An evaluation of the kinetic parameters of the catalytic reaction of the biossensor showed coherence with the results exposed in the literature
Resumo:
This work was originated through the results of the analysis of the services for the needs of people with disabilities that were permitted by the physical space of two schools of the municipality of Natal/RN. The general objective/goal was to subsidize the elaboration of alternatives for the planning of environments that could be used by any person. The study used the empirical research through the adoption of a multimethod approach including: (i) technical visits oriented by the NBR 9050, (ii) contact with users that have reduced mobility (visually impaired and wheelchair or crutch users) through escorted travels and interviews, and (iii) interview with school managers. The evidence from the research, even though with significant development of laws that guarantee people with disabilities their right to citizenship, the physical environment of our schools still present with many obstacles that prevent the mobility of people with disabilities which proves their lack of readiness to accommodate them. Therefore, the actions taken to address the accessibility has been the adoption of temporary solutions that makes the adaptation more difficult, adds obstacles and reinforces the undesirable segregation, however still very present in our society. Finally, there is the indication that in order to achieve the spatial configuration that promotes social contact and integration in between the persons with different physical status, it is necessary to completely comprehend the activities developed in each space, from the conception of the equipment to the individual learning needs, having in mind creating environments that stimulates the execution of the tasks in an independent manner without the assistance of others. The inclusion regarding attention to accessibility in the decision making process, directed to the arquitectural and urban project, would decrease the constant need to redevelop and adapt spaces, and should be definitely incorporated as an important component in the production of space