Estudo da sinterabilidade de ligas de níquel obtidas por meio dos portadores de liga sic, si3n4 ou si metálico com grafita

Nickel alloys are frequently used in applications that require resistance at high temperatures associated with resistance to corrosion. Alloys of Ni-Si-C can be obtained by means of powder metallurgy in which powder mixtures are made of metallic nickel powders with additions of various alloying carriers for such were used in this study SiC, Si3N4 or Si metal with graphite. Carbonyl Ni powder with mean particle size of 11 mM were mixed with 3 wt% of SiC powders with an average particle size of 15, 30 and 50 μm and further samples were obtained containing 4 to 5% by mass of SiC with average particle size of 15 μm. Samples were also obtained by varying the carrier alloy, these being Si3N4 powder with graphite, with average particle size of 1.5 and 5 μm, respectively. As a metallic Si graphite with average particle size of 12.5 and 5 μm, respectively. The reference material used was nickel carbonyl sintered without adding carriers. Microstructural characterization of the alloys was made by optical microscopy and scanning electron microscopy with semi-quantitative chemical analysis. We determined the densities of the samples and measurement of microhardness. We studied the dissociation of carriers alloy after sintering at 1200 ° C for 60 minutes. Was evaluated also in the same sintering conditions, the influence of the variation of average particle size of the SiC carrier to the proportion of 3% by mass. Finally, we studied the influence of variation of the temperatures of sintering at 950, 1080 and 1200 ° C without landing and also with heights of 30, 60, 120 and 240 minutes for sintering where the temperature was 950 °C. Dilatometry curves showed that the SiC sintered Ni favors more effectively than other carriers alloy analyzed. SiC with average particle size of 15 μm active sintering the alloy more effectively than other SiC used. However, with the chemical and morphological analyzes for all leagues, it was observed that there was dissociation of SiC and Si3N4, as well as diffusion of Si in Ni matrix and carbon cluster and dispersed in the matrix, which also occurred for the alloys with Si carriers and metallic graphite. So the league that was presented better results containing Si Ni with graphite metallic alloy as carriers, since this had dispersed graphite best in the league, reaching the microstructural model proposed, which is necessary for material characteristic of solid lubricant, so how we got the best results when the density and hardness of the alloy

Compósitos de matriz metálica à base níquel com adição de TaC e NbC produzidos via metalurgia do pó

Carbide reinforced metallic alloys potentially improve some important mechanical properties required for the overall use of important engineering materials such as steel and nickel. Nevertheless, improved performance is achieved not only by composition enhancement but also by adequate processing techniques, such as novel sintering methods in the case of powder metallurgy. The method minimizes energy losses in addition to providing uniform heating during sintering. Thus, the general objective of this study was to evaluate the density, hardness, flexural strength, dilatometric behavior and to analyze the microstructure of metal matrix composites based nickel with addition of carbides of tantalum and / or niobium when sintered in a conventional furnace and Plasma assisted debinding and sintering (PADS). Initially, were defineds best parameters of granulation, screening and mixing procedure. After, mixtures of carbonyl Ni and 5%, 10% and 15 wt.% NbC and TaC were prepared in a Y-type mixer under wet conditions during 60 minutes. The mixtures were then dried and granulated using 1.5 wt. % paraffin diluted in hexane. Granulates were cold pressed under 600 MPa. Paraffin was then removed from the pressed pellets during a pre-sintering process carried out in a tubular furnace at 500 °C during 30 min. The heating rate was 3 ºC/min. The pellets were then sintered using either a plasma assisted reactor or a conventional resistive tubular furnace. For both methods, the heating rate was set to 8 ºC/min up to 1150 °C. The holding time was 60 minutes. The microstructure of the sintered samples was evaluated by SEM. Brinell hardness tests were also carried out. The results revealed that higher density and higher hardness values were observed in the plasma-assisted sintered samples. Hardness increased with the concentration of carbides in the Ni-matrix. The flexural strength also increased by adding the carbides. The decline was larger for the sample with addition of 5% 5% TaC and NbC. In general, compositions containing added carbide 10% showed less porous and more uniform distribution of carbides in the nickel matrix microstructural appearance. Thus, both added carbide and plasma sintering improved density, hardness, flexural strength and microstructural appearance of the composites

Efeitos da sintomatologia depressiva na mobilidade de idosos de um centro urbano do nordeste brasileiro

O processo de envelhecimento da humanidade é um fenômeno mundial e nas últimas décadas a população brasileira tem acompanhado essa tendência. No entanto, este fenômeno somente pode ser considerado como uma real conquista em termos sócios demográficos na medida em que se agregue qualidade aos anos adicionais de vida para a população. Em populações idosas, a incapacidade funcional e os sintomas depressivos tornaram-se importantes conceitos tanto por suas consequências para a saúde pública, quanto pelo impacto na qualidade de vida dessas populações. Este estudo tem como objetivo verificar se há associação entre os sintomas depressivos e o desempenho funcional de idosos comunitários. Foram avaliados 313 idosos de um centro urbano do nordeste brasileiro através das baterias de testes; Center for Epidemiologic Studies Depression CES-D e Short Physical Performance Battery - SPPB; além de variáveis relacionadas ao estado físico, condições crônicas, função cognitiva e características sócio demográficas. Foram utilizadas medidas de correlação e aplicado método de análise multivariada para construir um modelo explicativo da influência da sintomatologia depressiva no desempenho funcional. Os resultados revelaram que as mulheres apresentaram mais sintomas depressivos (p< 0.01) e pior desempenho funcional (p< 0.01) que os homens. Os indivíduos com sintomatologia depressiva apresentaram pior desempenho funcional, especialmente as mulheres. A idade, o sexo feminino, o estado de saúde percebido, o nível de função cognitiva e o Índice de massa corporal foram identificados como fatores associados ao desempenho funcional na amostra estudada. Os resultados deste estudo permitem inferir a relação de associação entre sintomas depressivos e desempenho funcional em uma população de idosos de um centro urbano no nordeste do Brasil. Estes resultados fornecem informações úteis para intervenções terapêuticas adequadas voltadas para a prevenção do declínio na mobilidade em idosos

As sanções políticas, mecanismo de intervenção do estado na ordem econômica e tributária

This work pursues to analyze the sanctions of restrictive nature, which are characterized by impeding the business of the contributor in debt. Such sanctions known as political sanctions, are truly understood as an indirect way of tax enforcement, liable to cause problems to the private entity in curtailing, the initiative freedom, opposing the Article 5°, item XIII and Article 170, single paragraph of CF/88. As the State gets the several means to assure the economic order effective performance, it is up to the State to restrain the economic power abuse that objects to the marketing domination, to the ending of competition, and arbitrary increasing of profits (CF Article 173, § 4ª.) Therefore, it depends on the state, besides maintaining the economic order, to ensure a fair distribution of tax burden and act under the command of the Democratic State of Law principles. In order to make the tax collection effective, specific in some cases, the administrative fiscal agent uses coercive, excessive, and institutional, in imposing sanctions which causes constraint, maculating the contributor s essential rights, that matters of the necessity to force the tax credit ending. The principle of the free initiative and free competition, which are intended to be analyzed in this study, comes from a constitutional context and it will be reviewed in its systematic relations and with another rules, in order to evidence, at the end, the occurrence of an intervention towards the economic order when the State makes do of political sanctions as a tool for the tax credit effectiveness, infringing the Tax and Constitutional principles

Planejamento tributário: Critérios e limites para a desconsideração dos atos e negócios jurídicos pela administração fiscal

Tax planning is a subject that has been increasing in relevance in Tax Law. This current dissertation s objective is to approach the criterion and limits for the disqualification of law acts and business through the Tax Administration. Law acts and business resulted from the conduct of contributors that seek to diminish the growing raise of the tax load, using some means to reduce their burden and increase the possibilities of success in an economical activity, without violating the law in the persecution of paying fewer burdens. On the other hand, the tax administration, through its organs, hoping the increase of burden collection to withstand some determined sectors of the State, with a clear purpose to stop the contributor organizing his activity and structuring it as efficiently as possible, came up with a preliminary draft which left Complementary Law 104, from 10.02.2001, enacted, that inserted the unique paragraph of the National Tax Code, article 116, authorizing the disregard, by the administrative fiscal authority, of Law acts and business practiced to dissimulate the occurrence of burden gain or the nature of obligated incorporating elements, observing the procedures to be established in common law . Our goal is to identify the criteria and limits to disregard law acts and business through the tax administration, pointing out some possible means of action by the tax administration that qualifies it to disregard the contributor s acts and business, just claiming that a saving in the tax costs was made by the contributor s act

Experimentação, inovação cultura oganizacional: estudo de caso em uma indústria

A experimentação industrial é um método científico de aprendizagem que visa aprimorar conhecimentos sobre o funcionamento de sistemas, almejando redução de variabilidade e incertezas nos processos produtivos. Em inovação, constitui-se como uma oportunidade de teste e pré-implementação, permitindo à empresa aperfeiçoar seus projetos de inovação antes de levá-los ao mercado. Contudo, para que empresas obtenham sucesso em inovar, faz-se necessário um ambiente favorável à inovação, considerando que a cultura organizacional impacta diretamente no potencial inovador. Uma cultura de inovação bem desenvolvida demanda o envolvimento de todos os líderes da empresa atuando como facilitadores do processo. Nesse contexto, esta pesquisa tem como propósito avaliar o perfil da cultura organizacional visando o uso de experimentação no processo de inovação em uma indústria do ramo alimentício no Estado do Rio Grande do Norte. Para tanto, busca-se, por meio de fundamentação teórica, ampliar a compreensão da relação existente entre os temas experimentação, inovação e cultura organizacional, e tem-se como método de pesquisa, uma abordagem quanti-qualitativa em um estudo de caso. Os dados para análise da pesquisa são coletados por meio de entrevistas e aplicação de questionários. Para avaliar a cultura organizacional, utiliza-se como instrumento o questionário baseado no Modelo de Valores Competitivos, desenvolvido por Cameron e Quinn (2006), aplicado com os líderes na empresa em estudo. Este instrumento, denominado OCAI (em inglês Organizacional Culture Assessment Instrument), permite diagnosticar o perfil da cultura organizacional e da cultura da qualidade no cenário atual e no contexto ideal, a partir da percepção dos líderes da organização. Para análise dos dados, utiliza-se a técnica de análise de agrupamento, que permite avaliar a homogeneidade das opiniões dos líderes. Os resultados apontam, conforme a visão dos líderes, a necessidade de mudança no perfil cultural organizacional da empresa em estudo, de uma cultura em que predominam elementos da cultura de mercado (cenário atual) para uma cultura com maior ênfase em elementos da cultura clã e inovadora (cenário ideal), bem como uma cultura de qualidade que estimule a inovação, favorável à geração de ideia e conhecimento, a melhoria contínua e a busca por soluções criativas

Análise da precipitação no semi-árido potiguar

The semiarid rainfall regime is northeastern Brazil is highly variable. Climate processes associated with rainfall are complex and their effects may represent extreme situations of drought or floods, which can have adverse effects on society and the environment. The regional economy has a significant agricultural component, which is strongly influenced by weather conditions. Maximum precipitation analysis is traditionally performed using the intensity-duration-frequency (IDF) probabilistic approach. Results from such analysis are typically used in engineering projects involving hydraulic structures such as drainage network systems and road structures. On the other hand, precipitation data analysis may require the adoption of some kind of event identification criteria. The minimum inter-event duration (IMEE) is one of the most used criteria. This study aims to analyze the effect of the IMEE on the obtained rain event properties. For this purpose, a nine-year precipitation time series (2002- 2011) was used. This data was obtained from an automatic raingauge station, installed in an environmentally protected area, Ecological Seridó Station. The results showed that adopted IMEE values has an important effect on the number of events, duration, event height, mean rainfall rate and mean inter-event duration. Furthermore, a higher occurrence of extreme events was observed for small IMEE values. Most events showed average rainfall intensity higher than 2 mm.h-1 regardless of IMEE. The storm coefficient of advance was, in most cases, within the first quartile of the event, regardless of the IMEE value. Time series analysis using partial time series made it possible to adjust the IDF equations to local characteristics

Uso e ocupação do solo e a concentração de metais pesados no sedimento e na água: bacia do rio Pitimbu

The accelerated growth of urban regions have produced relevant effects on water resources. Urban regions need an adequate institutional structure that can be able to face environmental demands and the adverse effects of land use on water resources. This study aims at analysing land use effects on heavy metals concentration in sediments and water, as well as making a comparative analysis involving water physical-chemical parameters. Applied methodology included both in loco water parameters measurement and water and bed sediment sampling at 8 sections along the fluvial system. Sample analysis was performed in laboratory in order to measure heavy metal concentrations. It was measured metal concentrations of Al, Cu, Pb, Cd, Fe, Ni and Zn. Once the samples were subjected to acid digestion (method 3050B), concentration values were measured by using atomic absorption spectrometry by flame (ICP-FLAA). The analysis results were compared with normative reference, these standards is intended to assess the risks of toxic substances in sediment and water management programs. The normative reference used in this work were: a) Ontario Ministry of the Environment and Energy (OMEE, 1993) b) Normative Netherlands (VROM, 2000); c) Normative Canadian (CCME, 1999); d) United States Environmental Protection Agency (USEPA, 1977), e) CONAMA Resolution No. 344/2004; f) CONAMA Resolution No. 357/2005. The high concentrations of iron (38,750 mg.g-1), Lead (1100 mg.g-1), Nickel (100 μg.g-1) and zinc (180 μg.g-1) detected sediments confirm the state of degradation of the aquatic system. Iron concentrations (1.08 mg.L-1), Aluminum (0.6 mg.L-1) and phosphorus (0.05 mg.L-1) present in the water are outside the established standards for human consumption

A poesia ibero-americana de José de Anchieta

El poeta José de Anchieta, a través de sus poesías, contribuyó para la formación de la literatura en suelo brasileño. Con eso, él proporcionó un encuentro entre los dos mundos lo Nuevo y lo Viejo, América y Europa representados en la unión entre los pares antagónicos que son constantes en la poética anchietana, como lo sagrado y lo profano, la muerte y la vida, lo simple y lo erudito. Su poética traduce, por lo tanto, las huellas de la antropofagia cultural, en que el indio y el blanco son uno sólo; el pagano y el cristiano, juntos, caminan para el centro de sus ideologías concebidas por la catequesis y por el popular. En esa amalgama entre las culturas, él construye un nuevo código cultural-lingüístico-literario, formando una nueva identidad para la tierra brasileña, abriendo las puertas para el barroco. Sus poemas están en cuatro lenguas: portugués, tupí, latín y español. Y de ese conjunto, nuestra disertación analiza el corpus en lengua española, que en el suelo americano deja de ser española y se vuelve ibero-americana. Como fuentes de estudio crítico-teórico, nos basamos, como ejemplos, en las obras de Haroldo de Campos, Severo Sarduy, Eugênio D Ors, Lezama Lima, Oswald de Andrade, Alfredo Bosi, Massaud Moisés. Así, esta disertación muestra, por el medio de la poesía iberoamericana de José de Anchieta el rasgo del inicio de nuestra literatura así como del barroco americano y, además, conjuga su poesía dentro del espacio de los Clásicos una vez que se comunica con estos desde el proceso de su producción. En esa intercomunicación, José de Anchieta promueve una apertura para la consciencia poética que hace parte de los grandes poetas de la Literatura Universal. Él une el Brasil, con sus matas vírgenes, con su primitivismo, al Mundo, con su censura desmedida ante la visión del Paraíso

Cecília Meireles: mulher ao espelho, imaginário poético e metafísica do amor em Viagem e Mar Absoluto

En el florescer de la modernidad brasileña, surge la poesía de Cecília Meireles, revelando la mujer que opta conscientemente por la labor intelectual, por la especulación filosófica del amor y por la pasión de escribir. La lectura de su obra representa um desafío a la sensibilidad del estudioso de la literatura. En esta disertación, tratamos de ese trabajo em filigranas que la autora realiza. Nos situamos em las obras Viagem y Mar Absoluto como anclas simbólicas de un discurso que nos remite a la relación del poetar com el pensar. Se inserta, así, esa poética ceciliana en um modo filosófico platónico, trayendo elementos simbólicos, míticos, metafóricos capaces de remitirnos a las interpretaciones filosóficas del siglo XX, tal la heideggeriana que entiende la poesía dentro del principio del eterno juego del ser, que es lo del próprio lenguaje. Nuestra preocupación fundamental fue trillar los caminos del erostismo filosófico y la búsqueda de la autora em transcender la rigidez de los límites entre el masculino y el femenino, lanzándose em um imaginario poético cristiano, reinterpretado neoplatonicamente. Se exponen Mujer y Letras al espejo, velando y desvelando marcas e trazos de identidad. Tal juego especular nos ofreció elementos poéticos, estéticos y una experiencia ceciliana del lenguaje del ser, designio de la poesía mísma. De esta nuestra iniciativa, que es también reflejada y reflexiva, reunimos a las Letras la Filosofia, resaltando que ambas de manera diferente - nos dieron acceso a la construcción de esa poesía en que fulguran la escritura, el ser y la naturaleza metaforizada, caracterizando la multiplicidad de sentidos y la pluralidad de voces del presente y del pasado

Expressão de genes imediatos induzidos por vocalizações em sagüis-comuns (Callithrix jacchus)

Immediate-early genes (IEGs) expression has been widely used as a valuable tool to investigate brain areas activated by specific stimuli. Studies of natural vocalizations, specially in songbirds, have largely benefited from this tool. Here we used IEGs expression to investigate brain areas activated by the hearing of conspecific common marmoset (Callithrix jacchus) vocalizations and/or utterance of antiphonal vocalizations. Nine adult male common marmosets were housed in sound-attenuating cages. Six animals were stimulated with playbacks of freely recorded natural long distance vocalizations (phee calls and twitters; 45 min. total duration). Three of them vocalized in response (O/V group) and three did not (O/n group). The control group (C) was composed by the remaining animals, which neither heard the playbacks nor spontaneously vocalized. After one hour of the stimulation onset (or no stimulation, in the case of the C group), animals were perfused with 0,9% phosphate-saline buffer and 4% paraformaldehyde. The tissue was coronally sectioned at 20 micro meter in a cryostat and submitted to immunohistochemistry for the IEGs egr-1 and c-fos. Marked immunoreactivity was observed in the auditory cortex of O/V and O/n subjects and in the anterior cingulate cortex, the dorsomedial prefrontal cortex and the ventrolateral prefrontal cortex of O/V subjects. In this study, brain areas activated by vocalizations of common marmosets were investigated using IEGs expression for the first time. Our results with the egr-1 gene indicate that potential plastic phenomena occur in areas related to hearing and uttering conspecific vocalizations.

Análise das medidas de boa e má diversidade na construção de comitês de classificadores através de metaheurísticas de otimização multiobjetivo

Committees of classifiers may be used to improve the accuracy of classification systems, in other words, different classifiers used to solve the same problem can be combined for creating a system of greater accuracy, called committees of classifiers. To that this to succeed is necessary that the classifiers make mistakes on different objects of the problem so that the errors of a classifier are ignored by the others correct classifiers when applying the method of combination of the committee. The characteristic of classifiers of err on different objects is called diversity. However, most measures of diversity could not describe this importance. Recently, were proposed two measures of the diversity (good and bad diversity) with the aim of helping to generate more accurate committees. This paper performs an experimental analysis of these measures applied directly on the building of the committees of classifiers. The method of construction adopted is modeled as a search problem by the set of characteristics of the databases of the problem and the best set of committee members in order to find the committee of classifiers to produce the most accurate classification. This problem is solved by metaheuristic optimization techniques, in their mono and multi-objective versions. Analyzes are performed to verify if use or add the measures of good diversity and bad diversity in the optimization objectives creates more accurate committees. Thus, the contribution of this study is to determine whether the measures of good diversity and bad diversity can be used in mono-objective and multi-objective optimization techniques as optimization objectives for building committees of classifiers more accurate than those built by the same process, but using only the accuracy classification as objective of optimization

Integrating strategic and sustainable design approach for innovation process: a cement case study

Global society and technology have changed the relationships of the market. Quality and cost are not the main aspects of any industrial product. On the other hand, design, innovation and sustainability became significant requirements to company’s competitiveness. In this context, the design approach has shown evolutions, integrating social and environmental aspects beside traditional aspects such as technical and economic. Still, design has been becoming a strategic opportunity for companies, improving their competitiveness and increasing their market share. Thus, this research has analyzed the integration of both the Sustainable Design and Strategic Design Coaching (SDC) method in the making decision activities of companies. A cement company (BQMIL) was assigned as case study, in which the previous results have pointed out the significant hole of those concepts to generate Eco-innovation and Eco-Brand to increase its market share, corroborating the expectative of the design team

Avaliação do ciclo de vida no Brasil: uma investigação nas principais bases científicas nacionais

A avaliação do ciclo de vida (ACV) é uma metodologia de avaliação de impacto ambiental de produtos e sistemas de produção considerando todo o ciclo de vida, desde a aquisição de matérias-primas até a disposição final. Este trabalho consistiu na investigação do progresso dos estudos sobre ACV no Brasil, por meio de uma pesquisa bibliográfica em eventos e periódicos oficiais ou reconhecidos pela Associação Brasileira de Engenharia de Produção e na base de dados SciELO Brasil. Foram identificados 80 artigos, a maioria de instituições das regiões Sul e Sudeste. A Universidade de São Paulo (USP) e Universidade Federal de Santa Catarina (UFSC) apresentaram o maior número de publicações dentre as 50 instituições identificadas. Verificou-se que 17 artigos aplicaram efetivamente a metodologia ACV em um estudo de caso, sendo que 11 utilizaram a metodologia para avaliar processo produtivo e 6 para comparar materiais ou processos

Correlação entre contexto morfoestrutural e sismicidade nas regiões de João Câmara e São Rafael (RN)

This MSc thesis describes brittle deformation in two seismic zones located in north-eastern Brazil: João Câmara and São Rafael, Rio Grande do Norte State. Both areas show seismogenic faults, Samambaia and São Rafael, indicated by narrow zones of epicentres with a strike of 040o, a lenght of 30 km and 4 km, and a depth of 1-12 and 0,5-4 km, respectively. The first seismological and geological studies suggested blind faults or faults that were still in the beginning of the nucleation process. The region is under E-W-oriented compression and is underlain by Precambrian terrains, deformed by one or more orogenic cycles, which generated shear zones generally marked by strong pervasive foliation and sigmoidal shapes. The crystalline basement is capped by the Cretaceous Potiguar basin, which is also locally capped by Pliocene continental siliciclastic deposits (Barreiras Formation), and Quaternary alluvium. The main aim of this study was to map epicentral areas and find whether there are any surface geological or morphotectonic expression related to the seismogenic faults. A detailed geological map was carried out in both seismic areas in order to identify brittle structures and fault-related drainage/topographic features. Geological and morphotectonic evidence indicate that both seismogenic faults take place along dormant structures. They either cut Cenozoic rocks or show topographic expression, i.e., are related to topographic heights or depressions and straight river channels. Faults rocks in the Samambaia and São Rafael faults are cataclasite, fault breccia, fault gouge, pseudotachylyte, and quartz veins, which point to reactivation processes in different crustal levels. The age of the first Samambaia and the São Rafael faulting movement possibly ranges from late Precambrian to late Cretaceous. Both fault cut across Precambrian fabric. They also show evidence of brittle processes which took place between 4 and 12 km deep, which probably have not occurred in Cenozoic times. The findings are of great importance for regional seismic hazard. They indicate that fault zones are longer than previously suggested by seismogenic studies. According to the results, the methodology used during this thesis may also be useful in other neotectonic investigation in intraplate areas