Dedução de Funções de Alívio para Priorização de Variantes de Chaveamento Adequadas à Eliminação de Sobrecargas

Eventually, violations of voltage limits at buses or admissible loadings of transmission lines and/or power transformers may occur by the power system operation. If violations are detected in the supervision process, corrective measures may be carried out in order to eliminate them or to reduce their intensity. Loading restriction is an extreme solution and should only be adopted as the last control action. Previous researches have shown that it is possible to control constraints in electrical systems by changing the network topology, using the technique named Corrective Switching, which requires no additional costs. In previous works, the proposed calculations for verifying the ability of a switching variant in eliminating an overload in a specific branch were based on network reduction or heuristic analysis. The purpose of this work is to develop analytical derivation of linear equations to estimate current changes in a specific branch (due to switching measures) by means of few calculations. For bus-bar coupling, derivations will be based on short-circuit theory and Relief Function methodology. For bus-bar splitting, a Relief Function will be derived based on a technique of equivalent circuit. Although systems of linear equations are used to substantiate deductions, its formal solution for each variant, in real time does not become necessary. A priority list of promising variants is then assigned for final check by an exact load flow calculation and a transient analysis using ATP Alternative Transient Program. At last, results obtained by simulation in networks with different features will be presented

Caracterização de estruturas planares com substratos Iso/Anisotrópicos truncados através da técnica da ressonância transversa modificada

This work presents a theoretical and numerical analysis using the transverse resonance technique (TRT) and a proposed MTRT applied in the analysis of the dispersive characteristics of microstrip lines built on truncated isotropic and anisotropic dielectric substrates. The TRT uses the transmission lines model in the transversal section of the structure, allowing to analyze its dispersive behavior. The difference between TRT and MTRT consists basically of the resonance direction. While in the TRT the resonance is calculated in the same direction of the metallic strip normal axis, the MTRT considers the resonance in the metallic strip parallel plane. Although the application of the MTRT results in a more complex equivalent circuit, its use allows some added characterization, like longitudinal section electric mode (LSE) and longitudinal section magnetic mode (LSM), microstrips with truncated substrate, or structures with different dielectric regions. A computer program using TRT and MTRT proposed in this work is implemented for the characterization of microstrips on truncated isotropic and anisotropic substrates. In this analysis, propagating and evanescent modes are considered. Thus, it is possible to characterize both the dominant and higher order modes of the structure. Numerical results are presented for the effective permittivity, characteristic impedance and relative phase velocity for microstrip lines with different parameters and dimensions of the dielectric substrate. Agreement with the results obtained in the literature are shown, as well as experimental results. In some cases, the convergence analysis is also performed by considering the limiting conditions, like particular cases of isotropic materials or structures with dielectric of infinite size found in the literature. The numerical convergence of the formulation is also analyzed. Finally, conclusions and suggestions for the continuity of this work are presented

Reconhecimento de padrões de falhas em motores trifásicos utilizando redes neurais

This work presents a diagnosis faults system (rotor, stator, and contamination) of three-phase induction motor through equivalent circuit parameters and using techniques patterns recognition. The technology fault diagnostics in engines are evolving and becoming increasingly important in the field of electrical machinery. The neural networks have the ability to classify non-linear relationships between signals through the patterns identification of signals related. It is carried out induction motor´s simulations through the program Matlab R & Simulink R , and produced some faults from modifications in the equivalent circuit parameters. A system is implemented with multiples classifying neural network two neural networks to receive these results and, after well-trained, to accomplish the identification of fault´s pattern

Análise de onda completa de superfície seletiva em freqüência do tipo anteparo duplo

This work presents a theoretical analysis and numerical and experimental results of the scattering characteristics of frequency selective surfaces, using elements of type patch perfectly conductor. The structures are composed of two frequency selective surfaces on isotropic dielectric substrates cascaded, separated by a layer of air. The analysis is performed using the method of equivalent transmission line in combination with the Galerkin method, to determine the transmission and reflection characteristics of the structures analyzed. Specifically, the analysis uses the impedance method, which models the structure by an equivalent circuit, and applies the theory of transmission lines to determine the dyadic Green's function for the cascade structure. This function relates the incident field and surface current densities. These fields are determined algebraically by means of potential incidents and the imposition of the continuity of the fields in the dielectric interfaces. The Galerkin method is applied to the numerical determination of the unknown weight coefficients and hence the unknown densities of surface currents, which are expanded in terms of known basis functions multiplied by these weight coefficients. From the determination of these functions, it becomes possible to obtain numerical scattered fields at the top and bottom of the structures and characteristics of transmission and reflection of these structures. At work, we present numerical and experimental results for the characteristics of transmission and reflection. Comparisons were made with other results presented in literature, and it was observed a good agreement in the cases presented suggestions continuity of the work are presented

Método híbrido para projeto de superfícies seletivas em frequência

This thesis presents a hybrid technique of frequency selective surfaces project (FSS) on a isotropic dielectric layer, considering various geometries for the elements of the unit cell. Specifically, the hybrid technique uses the equivalent circuit method in conjunction with genetic algorithm, aiming at the synthesis of structures with response single-band and dual-band. The equivalent circuit method allows you to model the structure by using an equivalent circuit and also obtaining circuits for different geometries. From the obtaining of the parameters of these circuits, you can get the transmission and reflection characteristics of patterned structures. For the optimization of patterned structures, according to the desired frequency response, Matlab™ optimization tool named optimtool proved to be easy to use, allowing you to explore important results on the optimization analysis. In this thesis, numeric and experimental results are presented for the different characteristics of the analyzed geometries. For this, it was determined a technique to obtain the parameter N, which is based on genetic algorithms and differential geometry, to obtain the algebraic rational models that determine values of N more accurate, facilitating new projects of FSS with these geometries. The optimal results of N are grouped according to the occupancy factor of the cell and the thickness of the dielectric, for modeling of the structures by means of rational algebraic equations. Furthermore, for the proposed hybrid model was developed a fitness function for the purpose of calculating the error occurred in the definitions of FSS bandwidths with transmission features single band and dual band. This thesis deals with the construction of prototypes of FSS with frequency settings and band widths obtained with the use of this function. The FSS were initially reviewed through simulations performed with the commercial software Ansoft Designer ™, followed by simulation with the equivalent circuit method for obtaining a value of N in order to converge the resonance frequency and the bandwidth of the FSS analyzed, then the results obtained were compared. The methodology applied is validated with the construction and measurement of prototypes with different geometries of the cells of the arrays of FSS.

Método híbrido para projeto de superfícies seletivas em frequência

This thesis presents a hybrid technique of frequency selective surfaces project (FSS) on a isotropic dielectric layer, considering various geometries for the elements of the unit cell. Specifically, the hybrid technique uses the equivalent circuit method in conjunction with genetic algorithm, aiming at the synthesis of structures with response single-band and dual-band. The equivalent circuit method allows you to model the structure by using an equivalent circuit and also obtaining circuits for different geometries. From the obtaining of the parameters of these circuits, you can get the transmission and reflection characteristics of patterned structures. For the optimization of patterned structures, according to the desired frequency response, Matlab™ optimization tool named optimtool proved to be easy to use, allowing you to explore important results on the optimization analysis. In this thesis, numeric and experimental results are presented for the different characteristics of the analyzed geometries. For this, it was determined a technique to obtain the parameter N, which is based on genetic algorithms and differential geometry, to obtain the algebraic rational models that determine values of N more accurate, facilitating new projects of FSS with these geometries. The optimal results of N are grouped according to the occupancy factor of the cell and the thickness of the dielectric, for modeling of the structures by means of rational algebraic equations. Furthermore, for the proposed hybrid model was developed a fitness function for the purpose of calculating the error occurred in the definitions of FSS bandwidths with transmission features single band and dual band. This thesis deals with the construction of prototypes of FSS with frequency settings and band widths obtained with the use of this function. The FSS were initially reviewed through simulations performed with the commercial software Ansoft Designer ™, followed by simulation with the equivalent circuit method for obtaining a value of N in order to converge the resonance frequency and the bandwidth of the FSS analyzed, then the results obtained were compared. The methodology applied is validated with the construction and measurement of prototypes with different geometries of the cells of the arrays of FSS.

Efeitos da composição domiciliar e da escala equivalente sobre as medidas de desigualdade de renda e pobreza no Brasil

MARIANO, J. L. ; FIGUEIREDO, ERIK A. . Efeitos da composição domiciliar e da escala equivalente sobre as medidas de desigualdade de renda e pobreza no Brasil. In: XXXVI Encontro Nacional de Economia,Salvador 2008.

Circuito regional de performance BodeArte: encontros, coletividade e porítica na performance do Rio Grande do Norte

This dissertation aims to look into the structure of the event Circuito Regional de Performance BodeArte1 to think how it collaborate with its proposal providing theoretical points to relevant questions to the comprehension of Brazilian performance art in contemporaneity, since its conceptual format until its occurrence and practical limitations. From this proposition the dissertation is organized into three chapters guided for the following aspects: the resumption of the events encompassed on the occurrence of Circuit BodeArte as well as a tabulation of the data reunited in its history, the presentation of its conceptual choices, and the metaphors conducted by the use of the term performance and how they can lead us to the idea of a performance-as-BodeArte. The methodological structures moved for this organization are qualitative, and have been formed from printed materials, texts, festival programs, blog, videos, photos, interviews, lectures and forums, plus our own memory as a producer and performer of the event, looking through these set points of the epistemological organization contained on the proposal of the Circuito, expanding and discussing them. This way this research moves between the propositions of this event in its three editions, promoting discussions that dialogue with concepts such as the emergence of Steve Johnson (2004), the metaphors of thought proposed by Christine Greiner (2005), the idea of performance hacker of Maria Beatriz de Medeiros (AQUINO, et al., 2012), as well as other propositions presented by Jan Swidzinski (2005) and Eleonora Fabião (2012)

Proposição de um modelo para análise de fluxo de carga, curto-circuito e simulação de relés de produção

The objective of the present work is develop a model to simulate electrical energy networks in transient and stead states, using the software ATP (Alternative Transient Program), able to be a way to join two distinct themes, present in classical methodology planning networks: short circuit analysis and load flow theory. Beyond that, using a tool for relay simulation, this paper intend to use the new developed model to investigate the influence of transient phenomenon in operation of protection relays, and calibrate the enterprise's protections relays. For testing the model, some relays, actually, installed at COSERN were used

Participação do circuito dopaminérgico nas alterações do comportamento de medo inato de camundongos infectados pelo Toxoplasma gondii

The protozoan parasite Toxoplasma gondii transforms the innate aversion of rats for cat urine into a fatal attraction, that increases the likelihood of the parasite completing its life cycle in the cat s intestine. The neural circuits implicated in innate fear, anxiety, and learned fear all overlap considerably, raising the possibility, that T. gondii may disrupt all of these nonspecifically. In this study, we evaluated immunoreactivity for tyrosine hydroxylase (TH) in areas associated with innate fear of infected male swiss mice. The latent Toxoplasma infection converted the aversion of mice to feline odors into attraction. This loss of fear is remarkably specific, as demonstrated by Vyas et al (2007), because infection did not diminish learned fear, anxiety-like behavior, olfaction, or nonaversive learning. However, the neurochemical mechanism related to alterations in innate fear due to T. gondii infection remains poorly studied. 20 mice were inoculated with bradyzoites (25 cysts) from a Toxoplasma gondii (Me-49 strain). The brains were removed after 60 days, sectioned and processed for TH immunohistochemistry. The correlation between the amount of cysts per area and the densitometric analysis of neurotransmitter reactivity was low in the areas implicated in innate fear of infected animals, when comparated with noninfected controls

O circuito espacial de produção e os círculos de cooperação da soja no Maranhão no período técnico-científico informacional

The study in screen it has as objective the understanding of the space circuit of production and the circles of cooperation of the soy that if develop in the Maranhão in the technician-scientific-informational period. Characterized for the material and incorporeal flows if they develop in the Maranhão, from the moment where it had a process of integration of the maranhense territory while peripheral space of the capitalist dynamics, that if gave through the politics of regional integration created by the State, but when it had a process of selective modernization, also partial and conservative of the agriculture, that made possible the significant increase of the production and reproduction of the capital. The study sample that with the advent of the soy, had a concentration of the production techniques, mainly in the agricultural region of Balsas, due to bigger it offers of lands, time of implantation of the culture, technique accumulated in the production, whereas in the agricultural region of Chapadinha, these indices still are without representation. Moreover, the intensification of the agricultural credit, the agrarian politics and tax incentives are elements that have propitiated increase of the production of the soy. The development of the space circuit and circles of cooperation of the soy, a side, create new forces politics in the Maranhão that can result in the creation of a new state, the other, are responsible, for the elimination of part of the subsistence agriculture, producing social problems as, agrarian concentration and unemployment. The study it still evidences the appropriation of the place for a small number of companies that has generated, beyond an intense concentration of income, an alienation of the territory, in view of that this is used for a strange purpose to the place and the yearning of the population does not stop

O circuito espacial da indústria de cerâmica vermelha no seridó potiguar

This research has as an empirical universe, the productive territory of red ware in the Seridó region of Rio Grande do Norte. In the last years this territory has gone through a process of appropriation that has been substantially changing the environmental and social dynamism of the place. However, the industry of red ware has been focusing in some areas, mainly, in the county of Parelhas and Carnaúba dos Dantas. From this point of view, the aim of this work consists in analyze the use of these areas by the red ware industry and the transformations occurred with the expansion of the number of industries and the productivity raise, that requires bigger amounts of earthenware and wood, resources that are low in referred territory. As the result of this process, the suitable alternative has been to acquire inputs in other Rio Grande do Norte counties, as well as in Paraíba counties. To reach the proposed objective, the methodology of this work was consisted of bibliographic and empirical research, regarding the occupation that this activity covers in the Seridó region. From the information obtained during the research, it can be stated that the inputs to the production execution in the red ware industry are acquired in the geographic nearby lands. The analysis of the stages of the production(acquisition of raw material, production and commercialization) showed that the activity acts in a continuous area, having as principal consumer market other northeastern states and the state of Pará. The present study revealed that the pottery activity is set as untenable, because of non-stopping use of the argil and wood, resources that are vanishing from the area, which consume causes a many problems such as deforestation and erosion. Besides, the sale of productive lands for the red ware industries makes harder its good use by the familiar agriculturists in the development of agriculture and cattle raising activity, which for many times is the main economic activity of the place. The precariousness reveals in the constant accidents at work, that most of them are neglected by the local authorities, without any penalty to the industries. Therefore, the industry of red ware in Seridó uses the territory as a resource, leaving its environmental problems that my compromise the quality of life of the actual and future generations

Circuito espacial de produção de sal:o uso do território do município de Macau/RN pelas indústrias salineiras

The current work it is a research of the spatial circle of salt production and the uses implied by RN salt industry, specifically the city of Macau / RN. Part of the issue - how it gives the uses implied by the spatial distribution of salt in the current historical period, known by some geographers as technical-scientific-informational. The way taken to answer this research was through readings of researches already carried out, field research in government agencies, the use of photographs, questionnaires and interviews. The search for data on production salting, their handling and marketing was one of the methodology steps. The result of this research was the perception of the dynamic activity of salting and uses transmitted within the city of Macau / RN, and the state of Rio Grande do Norte.

O circuito espacial da produção petrolífera no rio Grande do Norte

Our study refers to the state of Rio Grande do Norte against the deployment of oil activity in their territory. In this sense the aim of this work was to analyze the presence of the loop space of the oil production system linked to objects and actions on the Rio Grande do Norte territory. From the so-called "oil shock", an event that caused global developments in several countries, Petróleo Brasileiro S/A (PETROBRAS) increased investments in drilling geological basins in Brazil. In the year 1973 was drilled in the sea area well which led to commercial production of oil and gas in Rio Grande do Norte. From that point on were added in some parts of the Potiguar territory, large systems of coupled objects to actions caused by several agents. In this context, geographic situations have been reorganized due to an unprecedented space circuit production accompanied by a new circle of cooperation. In the state happen all instances of the circuit: the production, distribution and consumption. In light of the theory of the geographical area seek to direct our thoughts to the operation of these bodies, and they are linked to material and immaterial flows multiscales. This perspective allows us to think the territory of Rio Grande do Norte entered into a new territorial division of labor characterized by specialization regional production. Oil activity was implemented in the territory of Rio Grande do Norte at a time marked by productive restructuring of various economic sectors. The oil sector has been acting increasingly linked the scientific and informational, with a view to increasing productivity. The presence of this circuit demanded the territory, specifically the Mossoró, an organizational structure that is different from the vast system nationally integrated private commercial corporations to small corporations, all of them relating directly or indirectly to PETROBRAS. The flows between companies whose headquarters are located in distant states and even countries have generated a continuous movement of goods, people, information and ideas, which is also causing new materialities in the territory

O Circuito inferior da economia urbana em Mossoró: a dinâmica do comércio ambulante

This study was based on the analysis and understanding of the dynamics of the lower circuit of the economy and the size of the street trading in the city of Mossoro (RN). The operationalization of the theory of the two circuits of the urban economy, based on Santos (2008a) was essential to understand the street trading as part of the entire city of Mossoro. It was given emphasis on the study of the lower circuit of the economy and its coverage in the street trading in the commercial center of the city, specifically in street trading in Coronel Gurgel. The dynamics of that street reveals the different ways that the territory is used simultaneously by different social actors as pedestrians, consumers, business owners, and especially by street vendors. These vendors occupy the spaces along the streets of the city commercial center, placing their tents or stalls, especially on sidewalks, excellent strategic locations for the marketing of their products, due to the large influx of people seeking goods and services nearby. As methodological and technical procedures for gathering primary data, we opted for the use of questionnaires and interviews, with many users of the lower circuit, both consumers and vendors. The analysis of these questionnaires, along with the theoretical background, has revealed that there are several social and political conflicts related to the use of public spaces, such as sidewalks and flowerbeds, in the city commercial center, and that these conflicts are increasingly demonstrating that vendors need a space endowed with infrastructure to conduct their activities. The lack of efficiency of the government, as well as the slowness of their actions to organize a space that is able to properly fit salespersons, constitutes one of the main problems faced by these small traders who have limited financial resources and materials to get their activities through in the globalized world. At the same time, this study revealed the importance of these agents, as the last link of the urban economy, in the distribution of various consumer goods, enabling the satisfaction of some needs of the population, especially the poorer people