Mastigatory efficiency in denture wears with bilateral balanced occlusion and canine guidance

The maintenance of masticatory function is especially important for patients wearing complete dentures due to their limitations. Thus, the bilateral balanced occlusal concept is used to achieve greater masticatory efficiency. However, a critical review of the literature reveals that there is not sufficient scientific evidence to support bilateral balanced occlusion as the most appropriate occlusal concept in complete dentures. Therefore, the aim of this study was to evaluate the masticatory efficiency in complete dentures wearers with bilateral balanced occlusion and canine guidance. A double-blinded controlled crossover clinical trial was conducted. The sample was composed by 24 edentulous patients who wore sets of complete dentures with both occlusal concepts during equal periods of 3 months. Objective data were collected through the masticatory efficiency test performed by the colorimetric method with the beads, in which capsules of a synthetic material enclosing fuchsine-containing granules were used. Subjective data were recorded by patient's ratings of their chewing function. No significant statistical difference was found for masticatory efficiency (p=0.095) between the two occlusal concepts studied. The results suggest that bilateral balanced occlusion does not improve the masticatory efficiency in complete denture wearers.

Mastigatory efficiency in denture wears with bilateral balanced occlusion and canine guidance

The maintenance of masticatory function is especially important for patients wearing complete dentures due to their limitations. Thus, the bilateral balanced occlusal concept is used to achieve greater masticatory efficiency. However, a critical review of the literature reveals that there is not sufficient scientific evidence to support bilateral balanced occlusion as the most appropriate occlusal concept in complete dentures. Therefore, the aim of this study was to evaluate the masticatory efficiency in complete dentures wearers with bilateral balanced occlusion and canine guidance. A double-blinded controlled crossover clinical trial was conducted. The sample was composed by 24 edentulous patients who wore sets of complete dentures with both occlusal concepts during equal periods of 3 months. Objective data were collected through the masticatory efficiency test performed by the colorimetric method with the beads, in which capsules of a synthetic material enclosing fuchsine-containing granules were used. Subjective data were recorded by patient's ratings of their chewing function. No significant statistical difference was found for masticatory efficiency (p=0.095) between the two occlusal concepts studied. The results suggest that bilateral balanced occlusion does not improve the masticatory efficiency in complete denture wearers.

A infecção por Leishmania infantum chagasi altera o metabolismo lipídico do hospedeiro

American visceral leishmaniasis (AVL), caused by Leishmania infantum chagasi (L.i.chagasi), stands as a public health problem in Brazil, with human and canine cases related in all states..Lipid metabolism can be modified in several status of infection. For example, experimental studies show that the cholesterol is necessary to internalization and replication of L.i.chagasi in macrophages through caveolar domains. Patients with AVL present low levels of cholesterol and a visible triglycerides increase. This work aimed to evaluate the lipid metabolism in several post-infection status by L.i.chagasi, including individuals with symptomatic infection (AVL), and asymptomatic. The levels of cholesterol, triglycerides, HDL and reactive C protein, were measured. Individuals with AVL were compared with individuals with assymptomatic infection and presented low levels of total cholesterol (128 ± 6.180 mg/dL vs. 158 ±5.733 mg/dL, p=0.0001), HDL (29 ± 1.746 mg/dL vs. 37 ± 1.647 mg/dL, p=0.0001), increased levels of triglycerides (149.5 mg/dL ± 12.72 vs. 78.00 ± 10.43 mg/dL, p=0.0095) and higher levels of reactive C protein (1.750± 0.4939 mg/dL vs. 0.40 ± 0.1707 mg/dL; p=0.0001). The expression of genes related to lipid metabolism, such as LXR-a, LXR-b, PPAR-a, PPAR-d, PPAR-g and APOE was evaluated by real time PCR. A reduction in the expression of those genes was found in the group of AVL patients corroborating the serum levels of the metabolites earlier quantified. Our findings suggest a modulation of metabolism of lipids, in the chronic phase of AVL, this could facilitate the survival of leishmania, due to the known reduction on the ability of macrophages in presenting antigens efficiently to the T cells due to the reduction in the cholesterol available, it results in a subversion of the host immunity.

Estudo clínico-laboratorial e histopatológico de cães naturalmente infectados por Leishmania chagasi com diferentes graus de manifestação física

Canine Visceral Leishmania (CVL) is an important zoonotic disease that has a world wide distribution and has a large impact on public health on the American Continent, especially in Brazil, where the nature of endemic diseases in humans affects a large part of the nation. The influence of the prevalence of CVL in the increased rate of human cases in endemic areas and in the unleashing of epidemic outbreaks shows the need for a more profound understanding, that would generate significant advances in the current measures used to control the reservoirs of sickness that are practiced by the Programa Nacional de Vigilância e Controle da Leishmaniose Visceral. The present work describes and compares the clinical-laboratorial and histopathological findings of twenty-three dogs that were naturally infected by Leishmania chagasi, from endemic areas in metropolitan Natal, Rio Grande do Norte, Brazil. These animals, that were selected and given physical and serological exams (IFI and ELISA rK-39), were classified according to the degree of clinical severity and had blood samples drawn (whole blood and serum) for a complete hemogram and a coagulogram to be done as well as biochemical tests for kidney and liver function. The confirmation of infection by L. chagasi was done after the euthanasia of the animals, through the direct demonstration of the parasite in the impression of the spleen and liver crowned with GIEMSA and through a cultivation by means of NNN/Schneider. According to the clinical evaluation, the animals were classified as asymptomatic (7), oligosymptomatic (7) and polysymptomatic (9). Among the animals that were chosen to be autopsied, there were 2 asymptomatic, 3 oligosymptomatic and 3 polysymptomatic, for the purpose of studying their histopathology, having collected fragments of the spleen, liver, kidneys and skin and were fixed in 10% tamponed formol. The comparison between the average parameters of the clinical-laboratory tested animals in the groups was done through the Student t test (a<0.05). The main clinical signals observed were lymphadenomegaly, alopecy, dermatitis, exfoliation, cutaneous ulcers, onicogriphosis and emaciation. The main clinical-laboratorial alterations established, mainly in the polysymptomatic group, were anemia, hyperproteinemia, hyperglobulinemia, alterations in the albumin/globulin ratio and increased ALT activity. Renal alterations were not verified (urea and creatinine levels were normal). Thrombocytopenia was observed in three clinical groups. However, the other indicators of coagulation function (TAP and TTPA) did not have abnormal variations. There were inflammatory infiltrations and leishmania amastigotes in the skin of polysymptomatic dogs, however, they were not found in the skin of asymptomatic animals. Hypertrophy and hyperplasia of the phagocyte mononuclear system, leishmania amastigote parasites were found in the macrophages, extramedullary hematopoiesis and degenerative alterations were detected in the spleen and liver of 8 of the animals submitted to histopathological exams. In accord with these results, it was demonstrated that the expected alterations in the hematological and biochemical parameters in function of their viscerotropic nature of CVL are mainly observed in the more advanced stages of the disease. The absence of inflammatory infiltration and parasite load in the skin suggest that infected animals without symptoms may have an importance irrelevant to the infectiousness of the vector

Formulação e caracterização de matérias-primas para revestimento cerâmico Semi-Poroso com adição de chamote de telhas

The ceramics industry in Piauí is nowadays with 55 industries where 11 are in Teresina which is the mainstream of the state, producing 55 million shingles; in which 10 % is of this production is wasted being sometimes thrown on the margins of rivers, roads and highways provoking an environmental degradation. The main goal of this work is to verify the potential of producing semi porous ceramic using grog of shingles, on the first part of this work bodies-of-proof were produced from a basic formula of an industry, doping it with 5 %, 10 %, 15 % and 20 % in mass and in the second part of this work some bodies-of-proof were produced from a formula where one raw material was substituted by 50 % of grog and another substituting it all by grog, bodies-of-proof made of a basic formula previously announced was used for experiment control.The grog and the raw materials were characterized by: particle size analysis , thermal differential analysis, X ray diffraction , X ray fluorescence, an thermal gravimetric analysis and rational analyses. The bodies-of-proof were sintetisized in an industrial oven obeying the normal cycle adopted by an industry, with peak temperatures of 1135 oC and a fast burning cycle of 25 minutes having as energetic fuel liquefied petroleum gas . The pieces that were obtained by this were submersed in rehearsed physics of: water absorption of, apparent specific mass, apparent porosity, lineal retraction, rupture tension to the flexural and dilatometry; mineralogical analysis for X ray diffraction; and microstructural for electronic microscope of sweeping. For all the formulas with addition of grog, superior priorities to the requested by the requirements for semi porous and for the formula to F2-2,5 superior priorities to standard formulas which justifies the incorporation of the shingles in mass for the semi porous ceramic

Influência do teor de calcário no comportamento físico, mecânico e microestrutural de cerâmicas estruturais

There are ores of clay in Piauí State that are used for red structural ceramics, which are naturally contaminated with calcareous vein. This is one thing that impedes its exploration in an adequate way, especially for tile production. The present work aims at verifying the influence of the calcareous contents in the technological structural ceramics area, seeking to determine a maximum permissible calcareous proportion/contents in the ceramic mass using the patterns of the local industry production. For the consecution of this paper, it was characterized the clay and calcareous material by FRX, DRX, TGA and DTA. It was also configurated by extrusion and burnt in the temperatures of 850°C, 900°C, 950°C and 1000°C pieces of the corpus with 0, 5, 10, 15 e 20% of calcareous proportion. After that, it was carried out technological samples of linear retraction, water absortion, apparent porosity, specific apparent mass and mechanic resistance. The results showed the possibility of using calcareous in the ceramic mass and in some cases the technological properties got better

Desenvolvimento de cerâmica vermelha utilizando rejeitos da construção civil

The Industry of the Civil Construction has been one of the sectors that most contribute to the pollution of the environment, due to the great amount of residues generated by the construction, demolition and the extraction of raw material. As a way of minimizing the environmental impacts generated by this industry, some governmental organizations have elaborated laws and measures about the disposal of residues from the building construction (CONAMA - resolution 307). This work has as objective the reutilization of residues compound of sand, concrete, cement, red bricks and blocks of cement and mortar for the production of red ceramic, with the objective of minimizing costs and environmental impacts. The investigated samples contained 0% to 50% of residues in weight, and they were sintered at temperatures of 950°C, 1000°C, 1050°C, 1100°C and 1150°C. After the sinterization, the samples were submitted to tests of absorption of water, linear retraction, resistance to bending, apparent porosity, specific density, XRD and SEM. Satisfactory results were obtained in all studied compositions, with the possible incorporation of up to 50% of residues in ceramic mass without great losses in the mechanical strength, giving better results to the incorporation of 30% of residues in the fabrication of ceramic parts, such as roofing tiles, bricks masonry and pierced bricks

Obtenção de filtro cerâmico a partir da diatomita e casca de arroz carbonizada visando tratamento de efluente têxtil

The effluents released by the textile industry have high concentrations of alkali, carbohydrates, proteins, in addition to colors containing heavy metals. Therefore, a filter was prepared aiming primarily to the removal of color. In order to prepare this filter, rice hulls and diatomite were used, which have in their structure, basically amorphous hydrated silica. The silica exists in three crystalline forms: quartz, tridymite and cristobalite. In accordance with the above considerations, this study was divided into two stages; the first corresponds to the preparation of the filter and the second to carry out the tests in the effluent/filter in order to verify the efficiency of the color removal. First, the raw material was subjected to a chemical analysis and XRD, and then the diatomite was mixed, via humid, with a planetarium windmill with 20 %, 40 %, 60 % and 80 % of rice husk ash. To the mixture, 5 % carboxymethylcellulose (CMC) was added as a binder at room temperature. The samples were uniaxially compacted into metallic matrix of 0.3 x 0.1 cm² of area at a pressure of 167 MPa by means of hydraulic press and then sintered at temperatures of 1,000 °C, 1,200 °C and 1,400 °C for 1 h and submitted to granulometry test using laser, linear retraction, water absorption, apparent porosity and resistance to bending, DTA, TMA and XRD. To examine the pore structure of the samples scanning electron microscope (SEM) was used. Also tests were carried out in a mercury porosimeter to verify the average size of the pores and real density of the samples. In the second stage, samples of the effluent were collected from a local industry, whose name will be preserved, located in Igapó, in the State of Rio Grande do Norte - RN. The effluent was first pretreated before filtration and then subjected to a treatment of flotation. The effluent was then characterized before and after filtration, with parameters of color, turbidity, suspended solids, pH, chemical and biochemical oxygen demand (COD and BOD). Thus, through the XRD analysis the formation of cristobalite α in all samples was observed. The best average size of pore was found to be 1.75 μm with 61.04 % apparent porosity, thus obtaining an average 97.9 % color removal and 99.8 % removal of suspended solid

Estudo de massa cerâmica triaxial visando à otimização do ciclo de queima da indústria de cerâmica estrutural

Over recent years the structural ceramics industry in Brazil has found a very favorable market for growth. However, difficulties related to productivity and product quality are partially inhibiting this possible growth. An alternative for trying to solve these problems and, thus, provide the pottery industry the feasibility of full development, is the substitution of firewood used in the burning process by natural gas. In order to contribute to this process of technological innovation, this paper studies the effect of co-use of ceramic phyllite and kaolin waste on the properties of a clay matrix, verifying the possible benefits that these raw materials can give to the final product, as well as the possibility of such materials to reduce the heat load necessary to obtain products with equal or superior quality. The study was divided into two steps: characterization of materials and study of formulations. Two clays, a phyllite and a residue of kaolin were characterized by the following techniques: laser granulometry, plasticity index by Atterberg limits, X-ray fluorescence, X-ray diffraction, mineralogical composition by Rietveld, thermogravimetric and differential thermal analysis. To study the formulations, specifically for evaluation of technological properties of the parts, was performed an experimental model that combined planning involving a mixture of three components (standard mass x phyllite x kaolin waste) and a 23 factorial design with central point associated with thermal processing parameters. The experiment was performed with restricted strip-plot randomization. In total, 13 compositional points were investigated within the following constraints: phyllite ≤ 20% by weight, kaolin waste ≤ 40% by weight, and standard mass ≥ 60% by weight. The thermal parameters were used at the following levels: 750 and 950 °C to the firing temperature, 5 and 15 °C/min at the heating rate, 15 and 45min to the baseline. The results showed that the introduction of phyllite and/or kaolin waste in ceramic body produced a number of benefits in properties of the final product, such as: decreased absorption of water, apparent porosity and linear retraction at burn; besides the increase in apparent specific mass and mechanical properties of parts. The best results were obtained in the compositional points where the sum of the levels of kaolin waste and phyllite was maximal (40% by weight), as well as conditions which were used in firing temperatures of 950 °C. Regarding the prospect of savings in heat energy required to form the desired microstructure, the phyllite and the residue of kaolin, for having small particle sizes and constitutions mineralogical phases with the presence of fluxes, contributed to the optimization of the firing cycle.

Desenvolvimento de argamassa para restauração utilizando resíduo do polimento do porcelanato

The coatings mortars are essential elements of building structures because they execute an important role in protecting walls and are particularly exposed to aggressive action responsible for its degradation over time. The importance of wall coverings has been the subject of discussion and analysis in the conservation and rehabilitation of old buildings. Are sometimes removed and replaced with inappropriate solutions of constructive point of view or architecture. The most commonly used coatings on walls of old buildings is based on traditional hydraulic lime mortars. The present study aims at the formulation of new lime- based mortars and aerial fine aggregate, in order to contribute to a better field of conservation and restoration mortar coating of old buildings. Residue was used for polishing porcelain as fine aggregate, replacing the aggregate (sand), in percentages 05-30% by mass. We conducted a thorough evaluation of the mortar properties in fresh and hardened state by comparing the performance of the same with a reference mortar. The residue used was characterized as the density, bulk density, and particle size laser, scanning electron microscopy, X-ray diffraction and X-ray fluorescence. Formulations were produced 7, 6 with residue and one commonly used formulation, which served as a reference. In the formulations of lime mortars air (hydrated lime powder CH-I) has been adopted a stroke volume (1:3) with constant binder, was varied and the water / binder and aggregate and waste. For evaluation of mortars fresh, proceeded to consistency analysis, specific gravity, water retention and air content embedded. In the hardened state assays were performed in specific gravity, water retention, modulus of elasticity, tensile strength in bending, compressive strength, water absorption by capillary action, adhesion, tensile strength, resistance to shrinkage and salts by of crystallization trials with resources chloride solution, nitrate and sulfate all sodium in prismatic at 90 days of age, in addition to the micro structural analysis of mortars. Based on the results we can see that the mortar formulated with 10% content of waste and the reference free retraction feature more stable closer to neutrality. The composition of 10% was obtained better performance against the action of the salt crystallization. The mortar with 15% residue obtained better density, lower air content embedded and high capacity for water retention developing good workability. The replacement of 20% of waste generates a satisfactory utilization of resistance to compression, flexion and traction grip the base. And, finally, it can be seen that the mortar with 10, 15 and 20% residual show, in principle, good suitability as coatings, thus enabling a final result consistent with durability, workability and aesthetics developing therefore a material with better performance to repair or replace existing mortars in old buildings

Aproveitamento de resíduo de beneficiamento do caulim na produção de porcelanato cerâmico

Nowadays, industries from all sectors have great concerns over the disposition of the residues generated along the productive process. This is not different in the mineral sector, as this generates great volumes of residues. It was verified that the kaolin improvement industry generates great volumes of residue basically constituted of kaolinite, muscovite mica and quartz, which are basic constitution elements to formularisations of ceramics masses to the production of covering of stoneware tiles type. This happens because the methodology applied to the improvement process is still very rudimentary, what causes a very low yield, only ¼ from all the material volume that enters the improvement process, in the end, is marketable. The disposal of this residue, in a general way, causes a very big negative environmental impact, what has justified the researches efforts aiming to find a rational solution to this problem. In this way, the intention of this present work is the utilization of this residue in the manufacture of products to high quality ceramics covering, stoneware tiles in an industrial scale. For this purpose, the influence of the addition of the residue to a standard ceramics mass used by a ceramics sector company, already established in the market, with the intention of verifying the possibility of use of this residue as the mass complementary raw material and even the possible partial or total substitution of one of the components of the mass for the raw material in evidence will be studied. To the accomplishment of this work, the kaolin improvement residue generated by an industry of exploitation and improvement of kaolin, located in the region of Equador-RN, in the levels 1,2,4,8, 16 and 32% will be added to the standard mass already used for the production of stoneware tiles. The raw materials used, kaolin residue and the standard mass, were characterized through DRX, FRX, DTA, TGA and dilatometry. After the sintering of the bodies of test, tests of water absorption, apparent porosity, post burning linear retraction, apparent specific mass and flexural strength (3 point bending) were realized to determinate the technological properties of these materials. The results show the studied residue can be considered raw material of great potential to the industry of floor and ceramics covering of the stoneware tiles type

Aspectos ambientais e sociais envolvidos na transmissão da L. chagasi no município de Parnamirim/RN

Visceral leishmaniasis hás adapted in the past 20 years to periurban and urban areas, and in Natal, Rio Grande do Norte, it became endemic. Thid study aimed to evaluate the environmental and social aspectsof Leishmania chagasi infection and its epidemiologic transmission chain in an urban, periurban and rural area of Parnamirim-RN. A study with three sections was conducted: Section 1: Sectional study of the human and canine infection by L. chagasi and its environmental and social determinants. Section 2: Observational longitudinal cohort to evaluate the dynamics of the canine infection. Section 3: Longitudinal study to evaluate the behavior of Lu. Longipalpis vector and the seasonal factors related to its dynamics. To include in the study the hauses were randomly selected and georreferenciated. Montenegro skin test was done in the human population and blood samples were collected for anti-Leishmania antibody detection. The canine population was examinated for L. chagasi infection by RIFI, ELISA and ELISA for rK39. An entomologic surveillance was monthly done with CDC light trapsin 10 houses of each locality. Quantitative and qualitative analyses was done using STATISC 6.0. Probality and prediction maps were done using ArcGis 9.0 model. In the human population L. chagasi infection was associated with the area of the hause, age, sex, population densyti, vegetation, kind of the floor of thr hause, water and resides destiny. In the canine population L. chagasi infection was associated with the breed, size, time of living in the hause, presence of dogs in the neighborhood, presence of horses and donkeys in the neighborhood, vegetation, kind of the floor and walls of the hause. The human infection was associated with canine infction only when analyzed taking into account the locality. In the prospective study, serum conversion and antibody lost observed in 30,8% and 22% of the animals examined, respectively. The human infection rate by L. chagasi was 24,6%, by the presence of anti-Leishmania antibody and 38,6% by the Montenegro skin test. The canine infection rate 32,5% by the presence of anti-Leishmania antibody. The vector Lu longipalpis showed an atypical behavior. These results indicate that environmental and social factors are important variables associated with L. chagasi infection in humans and canines, with punctual association of thr last two. Control measures of the infection on the studied points are necessary, in the aim to reduce the endemic focus of the disease in the study area. This research was carried out in a multidisciplinary involving the categories of: doctor, biologist, veterinarian, statistical, pharmaceutical and biochemical

Alfabetizar crianças na escola pública: fazeres docentes em discussão

The most recent data of the Brazilian Test (BRAZIL, 2005) and of the SAEB (BRAZIL, 2007) have reaffirmed the serious situation of the Brazilian public school, where great part of the students, after to conclude 4º year of basic education, does not present minimum knowledge of reading and writing. In this picture, the situation of the state of Rio Grande do Norte, whose students had presented, in the last evaluation is particularly difficult, the worse performances of the country, in this area. The data also discloses that the failure pertaining to school, closely tied with the failure in the literacy, not only remains, as takes other aspects. In consequence of this picture, the literacy, even so widely argued in the last few decades, still instigates inquiries, as it is the case of this work. Our study got shaped due to reflections, as much to the theorizations to which we had access, as of the emergent questions of ours pedagogical practice. Through the past three decades, the studies in the area of literacy with the purpose to understand the constituent nature of the process, its aspects and its determinative ones has been intensified. The produced knowledge has contributed for the overcoming of the reductionist form as if it thought/thinks, in some contexts - this process. Such statements impel them to reflect concerning what is happening in the school, limiting or making possible the pertaining to school success. With these concerns, we delimit, as focus of study, the teaching action, having the following stunning question: What to make professors, in the context of the public school, to propitiate or hinder the process of literacy of the children? In this direction, our object of study is to make them professors who can propitiate or hinder the process of literacy of the children, in the context of the public school. The objective work to investigate, from practical of professors the teachers, that to make professors related to the literacy process - they can propitiate or hinder the learning of the written language, for the pupils of the public school, at the beginning of the school process. The work if inscribes in the qualitative boarding of research and if it configures as a case study, with characteristics of Research-Action, inspired by the following principles: authenticity and commitment and systematic restitution. For the retraction of the data, they had been used: half-structuralized interview; participant comment; meeting of studies and reflection; register in daily of field. We define as locus of study, a school of public net and, more specifically, a group of the initial years of school process that integrates the cycle of literacy . Of the five invited teachers, only one demonstrated interest in participating of the work. Its group of first year of the First Cycle of basic education is composed for 34 children, with ages between six the nine years. The data constructed by means of the described procedures, as well as its analysis, make possible to identify, between the many aspects and to make that they compose the pedagogical dynamics in the context of classroom, the following categories to make articulated with the literacy process: 1. To make of practical the relative ones to the planning, understood as To make relative: 1,1 distribution of the time-space/routine; 1.2 to the didactic activities and/or sequences and teaching interventions; 1.3 to the organization/election of the contents; 1.4 to the materials/didactic resources and 1.5 to the evaluation. 2. To make relative to the interaction professor-pupil, systemize in: 2.1 attention to the diversity; 2.2 to the affectivity. These to make, in the form as if materialized in the practical one observed, had been reflected, jointly with the teacher, as constituting parts of obstacles to a perspective of literacy. By means of the sharing of the reflections, anchored in theoretical conceptions concerning the practical one of teach-learning and, more specifically, of literacy, we register indications of new meanings of these to make on the part of the teacher in conducting them as providers of learning of its pupils, first purpose of its teaching performance. This finishing, possible synthesis at this moment is, therefore, point of fond and departure for new studies

A autonomia da escola pública :um complexo movimento entre a outorga e a construção

The present research to explorer the configurations that come being given to the autonomy of the school, since the decade of 1990. We investigate the implementation of the principle of the autonomy in the public system of education of the State of Pernambuco and, specifically, in four school units and this schools its in the quarters of Stubborn Brasilia Teimosa and Casa Amarela, both located in Recife. We try to know if the implementation of the autonomy of the school is circumscribed in the process of productive reorganization, it was evidenced that the inclusion of this principle in the educational politics - in the scopes national and state - obeyed the dynamics of retraction that, in the neoliberal context, the performance of the State in relation to the public education and the school characterizes, with consequence impact in the investigated schools. From the empirical inquiry it was identified to the occurrence of a movement realized for the social actors of the schools research in direction to the construction of the pertaining to school autonomy; this movement presenting some limits and fragilities. It was evidenced despite this movement varied of intensity in the measure where the social actors of the schools had developed levels of dinamics processes (in greater or minor degree) related with the diverse expressions of democratic management that can occur into the school, such as: elaboration of the Politician-Pedagogical Project, institution and functioning of the Pertaining to school Advice, etc. The set of the carried through analyses made possible that it concluded that, in the context neoliberal and delimited to the investigated time and space, the implementation of the autonomy of the school comes if giving in way to a complex movement of construction

Influência da adição de rejeitos cerâmicos nas propriedades de cerâmica vermelha da região do Recôncavo Baiano

The study of the physical and mechanic properties is an analysis of unquestioned importance on the production of the ceramic materials. In the region of the Recôncavo Baiano, there are ceramic and small brick factories, that still use rudimentary techniques, where the necessity of characterization of raw materials is denounced by the quality of the final product. The present work has for objective to study the behavior of the clay proceeding from the region of the Recôncavo, between the cities of Candeias and Camaçari/Ba, with addition of 5, 10 and 15% by weight of brick scraps, trying to optimize the physic and mechanical properties of the final product, aiming a better possibility of being manufactured, mechanic resistance, low linear retraction and water absorption. The brick scraps and the clay were characterized by FRX, DRX, TG, ATD and the granulometric analysis. Samples for testing where prepared by uniaxial pressing at 25Mpa, in 60x20x5mm size. The evaluated technological properties were: linear retraction, water absorption, apparent porosity and flexural strength. The samples were burned in electric oven in the temperatures of 850º, 950º and 1050ºC and compared its mechanical properties and the gresification. With addition of 15% by weight of brick scraps and burning at 900º-1000ºC the samples showed properties superior to that clay