25 resultados para Binary and ternary correlations
em Universidade Federal do Rio Grande do Norte(UFRN)
Resumo:
The present work is to study the characteristics and technological properties of soil-cement bricks made from binary and ternary mixtures of Portland cement, sand, water, with or without addition of gravel from the drilling of oil wells, which could be used by industry, aiming to improve its performance and reduce cost by using the residue and, consequently, increasing its useful life. The soil-cement bricks are one of the alternatives to masonry construction. These elements, after a short curing period, provide compressive strength similar to that of solid bricks and ceramic blocks, and the higher the resistance the higher the amount of cement used. We used the soil from the city of São José do Mipibu / RN, the banks of the River Baldun, cement CPIIZ-32 and residue of drill cuttings from oil wells drilling onshore wells in the town of Mossley, RN, provided Petrobras. To determine the optimum mix, we studied the inclusion of different residues (100%, 80%, 70%, 60% and 50%) where 15 bodies were made of the test piece. The assessment was made of bricks made from simple compression tests, mass loss by immersion and water absorption. The experimental results proved the efficiency and high utilization of the waste from the drilling of oil wells, making the brick-cement-soil residue with a higher strength and lower water absorption. The best result in terms of mechanical strength and water absorption for the ternary mixture was 10% soil, 14% cement and 80% residue. In terms of binary mixtures, we obtained the best result for the mix-cement residue, which was 14% cement incorporated in the residue
Resumo:
According to the global framework regarding new cases of tuberculosis, Brazil appears at the 18th place. Thus, the Ministry of Health has defined this disease as a priority in the governmental policies. As a consequence, studies concerning treatment and prevention have increased. Fixed-dose combination formulations (FDC) are recognized as beneficial and are recommended by WHO, but they present instability and loss on rifampicin bioavailability. The main purpose of this work was to carry out a pre-formulation study with the schedule 1 tuberculosis treatment drugs: rifampicin, isoniazid, pyrazinamide and ethambutol and pharmaceutical excipients (lactose, cellulose, magnesium stearate and talc), in order to develop an FDC product (150 mg of rifampicin + 75 mg of isoniazid + 400 mg of pyrazinamide + 250 mg of ethambutol). The studies consisted of the determination of particle size and distribution (Ferret s diameter) and shape through optical microscopy, as well as rheological and technological properties (bulk and tapped densities, Hausner Factor, Carr s Index, repose angle and flux rate) and interactions among drugs and drug excipient through thermal analysis (DSC, DTA, TG and your derivate). The results showed that, except isoniazid, the other drugs presented poor rheological properties, determined by the physical characteristics of the particles: small size and rod like particles shape for rifampicin; rectangular shape for pyrazinamide and ethambutol, beyond its low density. The 4 drug mixture also not presented flowability, particularly that one containing drug quantity indicated for the formulation of FDC products. In this mixture, isoniazid, that has the best flowability, was added in a lower concentration. The addition of microcrystalline cellulose, magnesium stearate and talc to the drug mixtures improved flowability properties. In DSC analysis probable interactions among drugs were found, supporting the hypothesis of ethambutol and pyrazinamide catalysis of the rifampicin-isoniazid reaction resulting in 3- formylrifamycin isonicotinyl hydrazone (HYD) as a degradation product. In the mixtures containing lactose Supertab® DSC curves evidenced incompatibility among drugs and excipient. In the DSC curves of mixtures containing cellulose MC101®, magnesium stearate and talc, no alterations were observed comparing to the drug profiles. The TG/DTG of the binary and ternary mixtures curves showed different thermogravimetrics profiles relating that observed to the drug isolated, with the thermal decomposition early supporting the evidences of incompatibilities showed in the DSC and DTA curves
Resumo:
In the present work are established initially the fundamental relationships of thermodynamics that govern the equilibrium between phases, the models used for the description of the behavior non ideal of the liquid and vapor phases in conditions of low pressures. This work seeks the determination of vapor-liquid equilibrium (VLE) data for a series of multicomponents mixtures of saturated aliphatic hydrocarbons, prepared synthetically starting from substances with analytical degree and the development of a new dynamic cell with circulation of the vapor phase. The apparatus and experimental procedures developed are described and applied for the determination of VLE data. VLE isobarics data were obtained through a Fischer s ebulliometer of circulation of both phases, for the systems pentane + dodecane, heptane + dodecane and decane + dodecane. Using the two new dynamic cells especially projected, of easy operation and low cost, with circulation of the vapor phase, data for the systems heptane + decane + dodecane, acetone + water, tween 20 + dodecane, phenol + water and distillation curves of a gasoline without addictive were measured. Compositions of the equilibrium phases were found by densimetry, chromatography, and total organic carbon analyzer. Calibration curves of density versus composition were prepared from synthetic mixtures and the behavior excess volumes were evaluated. The VLE data obtained experimentally for the hydrocarbon and aqueous systems were submitted to the test of thermodynamic consistency, as well as the obtained from the literature data for another binary systems, mainly in the bank DDB (Dortmund Data Bank), where the Gibbs-Duhem equation is used obtaining a satisfactory data base. The results of the thermodynamic consistency tests for the binary and ternary systems were evaluated in terms of deviations for applications such as model development. Later, those groups of data (tested and approved) were used in the KijPoly program for the determination of the binary kij parameters of the cubic equations of state original Peng-Robinson and with the expanded alpha function. These obtained parameters can be applied for simulation of the reservoirs petroleum conditions and of the several distillation processes found in the petrochemistry industry, through simulators. The two designed dynamic cells used equipments of national technology for the determination of VLE data were well succeed, demonstrating efficiency and low cost. Multicomponents systems, mixtures of components of different molecular weights and also diluted solutions may be studied in these developed VLE cells
Resumo:
In the present work are established initially the fundamental relationships of thermodynamics that govern the equilibrium between phases, the models used for the description of the behavior non ideal of the liquid and vapor phases in conditions of low pressures. This work seeks the determination of vapor-liquid equilibrium (VLE) data for a series of multicomponents mixtures of saturated aliphatic hydrocarbons, prepared synthetically starting from substances with analytical degree and the development of a new dynamic cell with circulation of the vapor phase. The apparatus and experimental procedures developed are described and applied for the determination of VLE data. VLE isobarics data were obtained through a Fischer's ebulliometer of circulation of both phases, for the systems pentane + dodecane, heptane + dodecane and decane + dodecane. Using the two new dynamic cells especially projected, of easy operation and low cost, with circulation of the vapor phase, data for the systems heptane + decane + dodecane, acetone + water, tween 20 + dodecane, phenol + water and distillation curves of a gasoline without addictive were measured. Compositions of the equilibrium phases were found by densimetry, chromatography, and total organic carbon analyzer. Calibration curves of density versus composition were prepared from synthetic mixtures and the behavior excess volumes were evaluated. The VLE data obtained experimentally for the hydrocarbon and aqueous systems were submitted to the test of thermodynamic consistency, as well as the obtained from the literature data for another binary systems, mainly in the bank DDB (Dortmund Data Bank), where the Gibbs-Duhem equation is used obtaining a satisfactory data base. The results of the thermodynamic consistency tests for the binary and ternary systems were evaluated in terms of deviations for applications such as model development. Later, those groups of data (tested and approved) were used in the KijPoly program for the determination of the binary kij parameters of the cubic equations of state original Peng-Robinson and with the expanded alpha function. These obtained parameters can be applied for simulation of the reservoirs petroleum conditions and of the several distillation processes found in the petrochemistry industry, through simulators. The two designed dynamic cells used equipments of national technology for the determination Humberto Neves Maia de Oliveira Tese de Doutorado PPGEQ/PRH-ANP 14/UFRN of VLE data were well succeed, demonstrating efficiency and low cost. Multicomponents systems, mixtures of components of different molecular weights and also diluted solutions may be studied in these developed VLE cells
Resumo:
Triamcinolone is a relevant anti-inflammatory costicosteroid drug, used mainly by injectable suspensions due its poor water solubility. The association of triamcinolone with cyclodextrins and co-solvents (triethanolamine TEA and N-methylpirrolidone NMP) was held to solubilize the drug and explain the involved interactions. Phase-solubility diagrams showed that triamcinolone was solubilized forming incredible stable complexes with cyclodextrins, in which bests results were observed applying randomyl-methylated-beta-cyclodextrin (RMβCD) (161 fold on increased solubility). The co-solvents TEA and NMP also enhanced drug solubility 1.4 and 6.7 fold, respectively. The association of both co-solvents with CDs seems decreased complexation stability, but enables higher amount of uncomplexed drug. Experimental magnetic resonance 2D-ROESY and theoretical molecular modeling studies demonstrated TRI-CDs interactions and elucidated the structure of formed complex, which occurred due to the inclusion of ring A of TRI on CDs cavity. Physicochemical aspects of solid binary and ternary complexes prepared by spray drying were assessed by using FTIR, X-ray diffraction and SEM photographs. Dissolution studies showed that binary and ternary associations presented higher dissolution efficacy in detrimental to pure drug system. In addition, the ternary complex containing TEA and RMβCD allowed drug dissolution faster than binary complex with RMβCD. Therefore, given the higher solubility and drug dissolution rate, binary and ternary complexes are new raw materials with great potential for pharmaceuticals containing triamcinolone.
Resumo:
The present work is to study the characteristics and technological properties of soil-cement bricks made from binary and ternary mixtures of Portland cement, sand, water, with or without addition of gravel from the drilling of oil wells, which could be used by industry, aiming to improve its performance and reduce cost by using the residue and, consequently, increasing its useful life. The soil-cement bricks are one of the alternatives to masonry construction. These elements, after a short curing period, provide compressive strength similar to that of solid bricks and ceramic blocks, and the higher the resistance the higher the amount of cement used. We used the soil from the city of São José do Mipibu / RN, the banks of the River Baldun, cement CPIIZ-32 and residue of drill cuttings from oil wells drilling onshore wells in the town of Mossley, RN, provided Petrobras. To determine the optimum mix, we studied the inclusion of different residues (100%, 80%, 70%, 60% and 50%) where 15 bodies were made of the test piece. The assessment was made of bricks made from simple compression tests, mass loss by immersion and water absorption. The experimental results proved the efficiency and high utilization of the waste from the drilling of oil wells, making the brick-cement-soil residue with a higher strength and lower water absorption. The best result in terms of mechanical strength and water absorption for the ternary mixture was 10% soil, 14% cement and 80% residue. In terms of binary mixtures, we obtained the best result for the mix-cement residue, which was 14% cement incorporated in the residue
Resumo:
Stellar differential rotation is an important key to understand hydromagnetic stellar dynamos, instabilities, and transport processes in stellar interiors as well as for a better treatment of tides in close binary and star-planet systems. The space-borne high-precision photometry with MOST, CoRoT, and Kepler has provided large and homogeneous datasets. This allows, for the first time, the study of differential rotation statistically robust samples covering almost all stages of stellar evolution. In this sense, we introduce a method to measure a lower limit to the amplitude of surface differential rotation from high-precision evenly sampled photometric time series such as those obtained by space-borne telescopes. It is designed for application to main-sequence late-type stars whose optical flux modulation is dominated by starspots. An autocorrelation of the time series is used to select stars that allow an accurate determination of spot rotation periods. A simple two-spot model is applied together with a Bayesian Information Criterion to preliminarily select intervals of the time series showing evidence of differential rotation with starspots of almost constant area. Finally, the significance of the differential rotation detection and a measurement of its amplitude and uncertainty are obtained by an a posteriori Bayesian analysis based on a Monte Carlo Markov Chain (hereafter MCMC) approach. We apply our method to the Sun and eight other stars for which previous spot modelling has been performed to compare our results with previous ones. The selected stars are of spectral type F, G and K. Among the main results of this work, We find that autocorrelation is a simple method for selecting stars with a coherent rotational signal that is a prerequisite to a successful measurement of differential rotation through spot modelling. For a proper MCMC analysis, it is necessary to take into account the strong correlations among different parameters that exists in spot modelling. For the planethosting star Kepler-30, we derive a lower limit to the relative amplitude of the differential rotation. We confirm that the Sun as a star in the optical passband is not suitable for a measurement of the differential rotation owing to the rapid evolution of its photospheric active regions. In general, our method performs well in comparison with more sophisticated procedures used until now in the study of stellar differential rotation
Resumo:
Taking care for an impaired elderly is a hard and costly task that could affect directly the caregiver health. The purpose of this study was to evaluate the physical and mental health of elderly caregivers from the city of Santa Cruz-RN and analyze the potential correlated factors through an observational analytic design of a crosssectional. A multidimensional questionnaire was used to evaluation of the social demographics characteristics and those related to the care activity, as well as the caregivers´ physical and mental health. It was realized a descriptive analyze using frequency distribution and measures of the central tendency and dispersion to description of the caregivers. To verify the magnitude of the association between the variables was used the bivariate analysis through the Pearson and Spearman correlations and qui-square test. To evaluation of the association of the correlated factors to the adverse outcome with the caregivers´ physical and mental health was made a multivariate analysis by logistic binary regression and multiple linear regression models. The final sample was constituted by 304 persons, mostly women with a mean age of 50.3 ±16.8 years. The principal factors related to the physical health were age, stress and life satisfaction. Be a male caregiver, caring for a little while the elderly with cognitive deficit and not been spouse were related to worse mental health. Have worse physical health, high stress, depressive symptomatology, burden and low levels of satisfaction were also related to the mental health. After adjust through multiple linear regression was observed R2 values of R2=0,21 for Stress, R2 =0,17 for Depressive Symptomatology, R2 =0,21 for Burden and R2 =0,16 for Satisfaction. The attainment of the factors associated with caregiver´s health can help in the elaboration of specifics politics witch the goal is the integral attention to the elderly and his caregiver. The inability of continuous taking care could result in adverse outcomes such as institutionalization, impairment and death
Resumo:
BORGES,D. M. L.et al. Mortalidade por câncer de boca e condição sócio-econômica no Brasil.Cad. Saúde Pública, Rio de Janeiro, v.25,n.2, p.321-327, fev, 2009
Resumo:
This study was developed with the aim of analyzing the effectiveness of renal transplantation on quality of life of kidney recipients in the Rio Grande do Norte State. This is a descriptive study with longitudinal design, panel type with quantitative approach to data analysis. The Quality of Life (QoL) of chronic disease kidney patients before and after kidney transplantation was assessed by the WHOQOL-bref, The population consisted of patients in pre and post-renal transplantation, the sample had 63 patients older than 18 years. The study was conducted after approval by the Research Ethics Committee of the Onofre Lopes University Hospital, Federal University of Rio Grande do Norte, No. CAAE 0008.0.294.000-10. Data collection was performed at a referral center for renal transplantation in Rio Grande do Norte, from May 2010 to May 2013. Data were analyzed using descriptive statistics and presented in tables and graphs. For statistical analyzes, Microsoft Excel XP and SPSS 15.0 software were used. The tests used were simple variance (ANOVA), t-test, Mann-Whitney and Wilcoxon test to compare means, and Spearman correlations. P values <0.05 were considered significant. The demographic data showed a predominance of people between 18 and 45 years (68.2%) with a mean age of 39.9 years (SD 12.2), male (63.5%), married (58.7%), with children (51.0%). Regarding the education level was observed that 49.2% of participants had completed primary school, and most did not engage in any work activity (90.4%) during the study period. Hemodialysis was the predominant renal replacement therapy (96.8%) and the average waiting time for execution of transplantation was 1.9 years (SD 1.9). Comparison of QoL before and after transplantation showed significant differences in all areas analyzed, demonstrating that kidney transplantation had a positive impact on QoL in chronic renal patients undergoing kidney transplantation. Sociodemographic factors did not influence the quality of life in this group of patients, indicating that transplantation was the main factor to explain the improvement in quality of life. Thus, the alternative hypothesis of the study was accept, that there is a significant difference in quality of life before and after kidney transplant. It is expected that the results of this study may contribute to the development of strategies to encourage organ donation and kidney transplantation process
Resumo:
The present work analyses and discusses the sociability in the culture of contemporary cities focusing on the theme of fear and violence in the daily life of squares in the city of João Pessoa-PB. We analyse the relations between places in town and make correlations of history and setting of neighborhoods with the process of urban growth, including recent interventions of public authorities in their public spaces. We observed in this dynamics social attitudes and actions that range from a desired peaceful coexistence to social exclusion. Thus, we discuss, based upon the imaginary vision, that the squares exist as a locus of equality, citizenship and political, and, also, as a space for everyone, despite the existence of symbolic forces working towards segregation and privatization, ruled in fear and violence. We aimed to investigate the different symbolic logics from the issue of fear and violence that allows the exclusion and the inclusion of groups and individuals in the quotidian use of public spaces of contemporary cities. We believe that the social action is demarcated by violence ant its corollary, the social fear, and operates based on the logic of a relational game always confrontational but experienced in different forms according to the social segment or group under study. We used a qualitative and quantitative methodology relating data and statistical analysis with categories created for the understanding of subjective factors. Our analyses combined ethnographic elements, periodics research and images of the city and its spaces, with the contribution of a survey that allowed comparisions of five squares of neighborhood based on the daily life under investigation. Our proposal was to deepen the investigations related to the public space of contemporary cities, expanding the look on João Pessoa and its cultural dynamics with an analysis of discourses, images, the collective imaginary and the social appropriation of the spaces based on fear and violence. The research accomplished in different areas and the analysis of images and speeches published in newspapers reports, books, advertising etc. allowed the approach of differentiated patterns of sociability in the same urban process. The neighborhoods in study are indeed spatially and economically distanced and the process of creation and construction of squares occurred in very different ways in the respective location. We defend the thesis that neighborhood community squares provide reinvigorated spaces and public spheres in the urban process and in the dynamics of sociability in the cities. These squares are also social spaces par excellence for the perception of the logic of individualism and segregation so marked by fear and violence in contemporary cities
Resumo:
Family farming has been considered as the new axis of rural development in the country, the focus of several public policies, especially the National Program for Strengthening Family Agriculture - PRONAF and Food Purchase Program - PAA. PRONAF was created with the aim of providing credit to farmers, while the PAA to support family farmers through the purchase of its production. In this context, the objective of this study is to analyze the correspondence of these two public policies for family farming, in the Territories of Citizenship of the state of Rio Grande do Norte, between the years 2008 to 2010. In the methodology, the analysis was performed by comparing the distributions of the two programs in the territories of citizenship status. There were also statistical tests of differences in proportions, and Spearman correlations, and estimated a logit regression model, in order to measure the probability of a farmer participating in the PAA is associated with one of the modes of PRONAF. The data used were obtained from the National and Supply - CONAB at the Institute of Technical Assistance and Rural Extension - EMATER, and the Ministry of Agrarian Development - MDA. Among the key findings was noted that policies were associated with a direct, but low in the districts of the Territories of Citizenship. And that, in the years 2008 and 2009, only in the territories of Mato Grande, Alto Oeste and Seridó, the actions of PAA and PRONAF had direct and significant correlations. It was found that in most of the territories, policies are performed randomly, ie that both have no correlation to each other. The estimates of the logit model showed that the chance of a family farmer, the PAA participant, receive credits PRONAF A, is higher in the territory of Mato Grande, and would have a chance to fall in PRONAF B in all areas surveyed. Moreover, farmers in the territories of the Assu-Mossoró, Sertão of Apodi, Seridó and Alto Oeste, participating in the PAA would be more likely to receive credits PRONAF C, reflecting thus the family farm more consolidated these territories
Resumo:
The biodiesel use has become important due to its renewable character and to reduce environmental impacts during the fuel burning. Theses benefit will be valid if the fuel shows good performance, chemistry stability and compatibility with engines. Biodiesel is a good fuel to diesel engines due to its lubricity. Then, the aimed of this study was to verify the physicalchemistry properties of biodiesel and their correlations with possible elastomers damage after biodiesel be used as fuel in an injection system. The methodology was divided in three steps: biodiesels synthesis by transesterification of three vegetable oil (soybean, palm and sunflower) and their physical-chemistry characterization (viscosity, oxidative stability, flash point, acidity, humidity and density); pressurized test of compatibility between elastomers (NBR and VITON) and biodiesel, and the last one, analyze of biodiesels lubricity by tribological test ball-plan( HFRR). Also, the effect of mixture of biodiesel and diesel in different concentrations was evaluated. The results showed that VITON showed better compatibility with all biodiesel blends in relation to NBR, however when VITON had contact with sunflower biodiesel and its blends the swelling degree suffer higher influences due to biodiesel humidity. For others biodiesels and theirs blends, this elastomer kept its mechanical properties constant. The better tribological performance was observed for blends with high biodiesel concentration, lower friction coefficient was obtained when palm biodiesel was used. The main mechanisms observed during the HFRR tests were abrasive and oxidative wear
Resumo:
The oil industry has several segments that can impact the environment. Among these, produced water which has been highlight in the environmental problem because of the great volume generated and its toxic composition. Those waters are the major source of waste in the oil industry. The composition of the produced water is strongly dependent on the production field. A good example is the wastewater produced on a Petrobras operating unit of Rio Grande do Norte and Ceará (UO-RNCE). A single effluent treatment station (ETS) of this unit receives effluent from 48 wells (onshore and offshore), which leads a large fluctuations in the water quality that can become a complicating factor for future treatment processes. The present work aims to realize a diagnosis of a sample of produced water from the OU - RNCE in compliance to certain physical and physico-chemical parameters (chloride concentration, conductivity, dissolved oxygen, pH, TOG (oil & grease), nitrate concentration, turbidity, salinity and temperature). The analysis of the effluent is accomplished by means of a MP TROLL 9500 Multiparameter probe, a TOG/TPH Infracal from Wilks Enterprise Corp. - Model HATR - T (TOG) and a MD-31 condutivimeter of Digimed. Results were analyzed by univariated and multivariated analysis (principal component analysis) associated statistical control charts. The multivariate analysis showed a negative correlation between dissolved oxygen and turbidity (-0.55) and positive correlations between salinity and chloride (1), conductivity, chloride and salinity (0.70). Multivariated analysis showed there are seven principal components which can explain the variability of the parameters. The variables, salinity, conductivity and chloride were the most important variables, with, higher sampling variance. Statistical control charts have helped to establish a general trend between the physical and chemical evaluated parameters
Resumo:
Rio Grande do Norte, northeast state from Brazil, it is the greatest producer and exporter of yellow melon, well known as Spanish melon. Despite the consumption of this fruit to be mainly its pulp, melon seeds are an important source of lipids considered an industrial residue it has been discharge product. The use of oilseeds in order to produce biodiesel establishes an important raw material and the increase of its production promotes the national development of the agriculture. In this background, the aim of this work has been to use oil from seeds of yellow melon to produce biodiesel and to accomplish a study of the phase equilibrium of the system evolving biodiesel, methanol and glycerin. The biodiesel was obtained by oil transesterification through methylic route with molar ratio 1:9.7 (oil:alcohol) and with a mass of NaOH of 0.5% from the oil mass; the reaction time was 73 minutes at 55 °C. A yield of 84.94% in biodiesel was achieved. The equilibria data present a well-characterized behavior with a great region of two phases. The tie lines indicate that methanol has a best solubility in the phase that is rich in glycerin. Consistency of the experimental data was made based on Othmer-Tobias and Hand correlations which values above 0.99 were found to correlation coefficients, this fact confers a good thermodynamic consistency to the experimental data. NRTL and UNIQUAC models were employed to predict liquid-liquid equilibrium of this system. It was observed a better concordance of the results when NRTL was applied (standard deviation 1.25%) although the UNIQUAC model has presented a quite satisfactory result either (standard deviation 2.70%). The NRTL and UNIQUAC models were also used to evaluate the effect of temperature in the range of 328 K to 358 K, in which a little change in solubility with respect to the data obtained at 298 K was observed, thus being considered negligible the effect of temperature