A perda de grupos funcionais em comunidades virtuais: efeito das interações entre espécies e grupos funcionais

High levels of local, regional, and global extinctions has progressively simplified communities in terms of both species and ecosystem functioning. Theoretical models demonstrated that the degree of functional redundancy determines the rates of functional group loss in response to species extinctions. Here, we improve the theoretical predictions by incorporating in the model interactions between species and between functional groups. In this study, we tested the effect of different scenarios of interspecific interactions and effects between functional groups on the resistance to loss of community functional groups. Virtual communities have been built with different distribution patterns of species in functional groups, both with high and low evenness. A matrix A was created to represent the net effect of interspecific interactions among all species, representing nesting patterns, modularity, sensitive species, and dominant species. Moreover, a second matrix B was created to represent the interactions between functional groups, also exhibiting different patterns. The extinction probability of each species was calculated based on community species richness and by the intensity of the interspecific interactions that act upon it and group to which it belongs. In the model, successive extinctions decrease the community species richness, the degree of functional redundancy and, consequently, the number of functional groups that remain in the system. For each scenario of functional redundancy, A, and B, we ran 1000 simulations to generate an average functional extinction curve. Different model assumptions were able to generate remarkable variation on functional extinction curves. More extreme variations occurred when the matrix A and B caused a higher heterogeneity in the species extinction probability. Scenarios with sensitive species, positive or negative, showed a greater variation than the scenarios with dominant species. Nested interactions showed greater variation than scenarios where the interactions were in modules. Communities with maximal functional evenness can only be destabilized by the interactions between species and functional groups. In contrast, communities with low functional evenness can have its resistance either increased or decreased by the interactions. The concentration of positive interactions in low redundancy groups or negative interactions in high redundancy groups was able to decrease the functional extinction rates. In contrast, the concentration of negative interactions in low redundancy groups or positive interactions in high redundancy groups was able to increase the functional extinction rates. This model shows results that are relevant for species priorization in ecosystem conservation and restoration

Características econômicas do valor de uso e de não uso de parques sobre dunas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Arquitetura em cidades “sempre novas”: modernismo, projeto e patrimônio

Arquitetura em cidades “sempre novas”: modernismo, projeto e patrimônio. Com essa chamada, a 4ª edição do encontro DOCOMOMO Norte-Nordeste, realizado na Universidade Federal do Rio Grande do Norte, em Natal, no período de 29 de maio a 02 de junho de 2012, reuniu um conjunto de trabalhos, mesas e conferências para pensar o processo de renovação arquitetônica e urbana de nossas cidades partindo da questão central de que o gosto pelo novo, pela novidade, torna rapidamente obsoleto aquilo que, quando surgiu, também era novo, moderno. O encontro contemplou uma diversidade de enfoques distribuída em três eixos temáticos:1) A arquitetura moderna como projeto; 2) experiências de conservação e transformação; e 3)narrativas historiográficas, na observação da especificidade da arquitetura, do urbanismo e do paisagismo no Brasil. Este livro, se organiza segundo cinco abordagens que estão subjacentes aos três eixos temáticos acima mencionados: a) trajetórias profissionais; b) a presença modernista em cidades brasileiras; c) a documentação, conservação, projeto e restauro; d) reflexões sobre a produção modernista e, finalmente, e) a tecnologia e desempenho. Para cada abordagem, foram selecionados alguns trabalhos representativos apresentados na ocasião. Espera-se contribuir, com esse livro, para o debate sobre a aparente – ou, para muitos, real – contradição entre a necessidade de renovação constante de nosso ambiente construído – afinal, a arquitetura e a cidade são por natureza dinâmicas – e a necessidade de preservação, particularmente do legado modernista inscrito em nossa paisagem urbana, ameaçado de extinção pelo descaso, pelo abandono ou pela transformação descabida.

Arquitetura em cidades “sempre novas”: modernismo, projeto e patrimônio

Arquitetura em cidades “sempre novas”: modernismo, projeto e patrimônio. Com essa chamada, a 4ª edição do encontro DOCOMOMO Norte-Nordeste, realizado na Universidade Federal do Rio Grande do Norte, em Natal, no período de 29 de maio a 02 de junho de 2012, reuniu um conjunto de trabalhos, mesas e conferências para pensar o processo de renovação arquitetônica e urbana de nossas cidades partindo da questão central de que o gosto pelo novo, pela novidade, torna rapidamente obsoleto aquilo que, quando surgiu, também era novo, moderno. O encontro contemplou uma diversidade de enfoques distribuída em três eixos temáticos:1) A arquitetura moderna como projeto; 2) experiências de conservação e transformação; e 3)narrativas historiográficas, na observação da especificidade da arquitetura, do urbanismo e do paisagismo no Brasil. Este livro, se organiza segundo cinco abordagens que estão subjacentes aos três eixos temáticos acima mencionados: a) trajetórias profissionais; b) a presença modernista em cidades brasileiras; c) a documentação, conservação, projeto e restauro; d) reflexões sobre a produção modernista e, finalmente, e) a tecnologia e desempenho. Para cada abordagem, foram selecionados alguns trabalhos representativos apresentados na ocasião. Espera-se contribuir, com esse livro, para o debate sobre a aparente – ou, para muitos, real – contradição entre a necessidade de renovação constante de nosso ambiente construído – afinal, a arquitetura e a cidade são por natureza dinâmicas – e a necessidade de preservação, particularmente do legado modernista inscrito em nossa paisagem urbana, ameaçado de extinção pelo descaso, pelo abandono ou pela transformação descabida.

Dunas costeiras de Jenipabu: Status de conservação e diretrizes para restauração da vegetação

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior

Desenvolvimento de argamassa para restauração utilizando resíduo do polimento do porcelanato

The coatings mortars are essential elements of building structures because they execute an important role in protecting walls and are particularly exposed to aggressive action responsible for its degradation over time. The importance of wall coverings has been the subject of discussion and analysis in the conservation and rehabilitation of old buildings. Are sometimes removed and replaced with inappropriate solutions of constructive point of view or architecture. The most commonly used coatings on walls of old buildings is based on traditional hydraulic lime mortars. The present study aims at the formulation of new lime- based mortars and aerial fine aggregate, in order to contribute to a better field of conservation and restoration mortar coating of old buildings. Residue was used for polishing porcelain as fine aggregate, replacing the aggregate (sand), in percentages 05-30% by mass. We conducted a thorough evaluation of the mortar properties in fresh and hardened state by comparing the performance of the same with a reference mortar. The residue used was characterized as the density, bulk density, and particle size laser, scanning electron microscopy, X-ray diffraction and X-ray fluorescence. Formulations were produced 7, 6 with residue and one commonly used formulation, which served as a reference. In the formulations of lime mortars air (hydrated lime powder CH-I) has been adopted a stroke volume (1:3) with constant binder, was varied and the water / binder and aggregate and waste. For evaluation of mortars fresh, proceeded to consistency analysis, specific gravity, water retention and air content embedded. In the hardened state assays were performed in specific gravity, water retention, modulus of elasticity, tensile strength in bending, compressive strength, water absorption by capillary action, adhesion, tensile strength, resistance to shrinkage and salts by of crystallization trials with resources chloride solution, nitrate and sulfate all sodium in prismatic at 90 days of age, in addition to the micro structural analysis of mortars. Based on the results we can see that the mortar formulated with 10% content of waste and the reference free retraction feature more stable closer to neutrality. The composition of 10% was obtained better performance against the action of the salt crystallization. The mortar with 15% residue obtained better density, lower air content embedded and high capacity for water retention developing good workability. The replacement of 20% of waste generates a satisfactory utilization of resistance to compression, flexion and traction grip the base. And, finally, it can be seen that the mortar with 10, 15 and 20% residual show, in principle, good suitability as coatings, thus enabling a final result consistent with durability, workability and aesthetics developing therefore a material with better performance to repair or replace existing mortars in old buildings

Desenvolvimento de argamassa para restauração utilizando resíduo do polimento do porcelanato

The coatings mortars are essential elements of building structures because they execute an important role in protecting walls and are particularly exposed to aggressive action responsible for its degradation over time. The importance of wall coverings has been the subject of discussion and analysis in the conservation and rehabilitation of old buildings. Are sometimes removed and replaced with inappropriate solutions of constructive point of view or architecture. The most commonly used coatings on walls of old buildings is based on traditional hydraulic lime mortars. The present study aims at the formulation of new lime- based mortars and aerial fine aggregate, in order to contribute to a better field of conservation and restoration mortar coating of old buildings. Residue was used for polishing porcelain as fine aggregate, replacing the aggregate (sand), in percentages 05-30% by mass. We conducted a thorough evaluation of the mortar properties in fresh and hardened state by comparing the performance of the same with a reference mortar. The residue used was characterized as the density, bulk density, and particle size laser, scanning electron microscopy, X-ray diffraction and X-ray fluorescence. Formulations were produced 7, 6 with residue and one commonly used formulation, which served as a reference. In the formulations of lime mortars air (hydrated lime powder CH-I) has been adopted a stroke volume (1:3) with constant binder, was varied and the water / binder and aggregate and waste. For evaluation of mortars fresh, proceeded to consistency analysis, specific gravity, water retention and air content embedded. In the hardened state assays were performed in specific gravity, water retention, modulus of elasticity, tensile strength in bending, compressive strength, water absorption by capillary action, adhesion, tensile strength, resistance to shrinkage and salts by of crystallization trials with resources chloride solution, nitrate and sulfate all sodium in prismatic at 90 days of age, in addition to the micro structural analysis of mortars. Based on the results we can see that the mortar formulated with 10% content of waste and the reference free retraction feature more stable closer to neutrality. The composition of 10% was obtained better performance against the action of the salt crystallization. The mortar with 15% residue obtained better density, lower air content embedded and high capacity for water retention developing good workability. The replacement of 20% of waste generates a satisfactory utilization of resistance to compression, flexion and traction grip the base. And, finally, it can be seen that the mortar with 10, 15 and 20% residual show, in principle, good suitability as coatings, thus enabling a final result consistent with durability, workability and aesthetics developing therefore a material with better performance to repair or replace existing mortars in old buildings