Atuação e desempenho do Ministério Público do Estado do Rio Grande do Norte no contexto da gestão pública: perspectiva estratégica

The present dissertation analyzes the performance and acting of the Rio Grande do Norte Public Ministery, in the strategic perspective, while responsible Institution for the defense of the collective rights. The comprehension of this theme inserts in a context of modernization of the public administration, in which is inserted, as well as their functional and structural changes, in a reality of innovations there is passing the organizations, looking to rescue the legitimacy of the government organizations, aligning them to the democratic values of the society. It detaches the strategic administration and the public administration and it exposes the strategic performance about the central point of the study, focusing in the development of the organization in the last four years, and other relative subjects to the acting. It is a unic case study, framed in the characteristics of the qualitative approaches - descriptive and exploratory. The analysis showed, through the method of content analysis, by the criterion of thematic categorization, that MP / RN come developing in an intense way,and it detaches that the changes already happened reflect a good strategic acting of the Institution, especially in the structural and functional areas, showing the strategic conscience of this, although that is not still enough to consider it as a strategic organization, and it concludes that there is still a lot for doing, and that the occurrence of an administration typically strategic in the extent of MP/RN is possible, with the conscience and participation of all, members and servants

Estudo da síntese e propriedade magnética de ferritas de manganês/cobalto dopadas com níquel

For the chemical method of synthesis of co-precipitation were produced ferrite powders manganese-cobalt equal stoichiometric formula Mn (1-x) Co (x) Fe2O4, for 0 < x < 1, first reagent element using as the hydroxide ammonium and second time using sodium hydroxide. The obtained powders were calcined at 400 ° C, 650 ° C, 900 ° C and 1150 ° C in a conventional oven type furnace with an air atmosphere for a period of 240 minutes. Other samples were calcined at a temperature of 900 ° C in a controlled atmosphere of argon, to evaluate the possible influence of the atmosphere on the final results the structure and morphology. The samples were also calcined in a microwave oven at 400 ° C and 650 ° C for a period of 45 minutes possible to evaluate the performance of this type of heat treatment furnace. It was successfully tested the ability of this group include isomorphic ferrite with the inclusion of nickel cations in order to evaluate the occurrence of disorder in the crystalline structures and their changes in magnetic characteristics.To identify the structural, morphological, chemical composition and proportions, as well as their magnetic characteristics were performed characterization tests of X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive spectroscopy (EDX), thermogravimetric (TG), vibrating sample magnetometry (MAV) and Mössbauer spectroscopy. These tests revealed the occurrence of distortion in the crystal lattice, changes in magnetic response, occurrence of nanosized particles and superparamagnetism

Características físicas, somatotipo e desempenho de corredores de 100 e 400 metros no Rio Grande do Norte

Objective: The aim of the study was to investigate physical characteristics and to examine association between somatotype and performance in collegiate runners of 100 m and 400 m. Methods: The sample, male runners (n=39) competing at the regional level in the state of Rio Grande do Norte, Brazil, had height, body mass, skinfolds, limb circumference and skeletal breadths measured. Then, the somatotype was calculated by Health-Carter method. Races (100 m and 400 m) were held to assess athletic performance. Descriptive statistics were calculated for the total sample, as well as for the 100 m and 400 m groups, and established four subgroups, named quartiles. For analysis between groups of runners (100 m x 400 m) was used Student's t test for independent samples. To examine the relationship between the race times and anthropometric variables, was used the Pearson correlation test. The somatotype dispersion distance and somatotype spatial distance were calculated among subgroups. One-way analysis of variance, the Wilcoxon test followed of Tukey post test, and correlation analysis were used with a significance level of p<0.05. Results: Somatotype with mesomorphy and ectomorphy dominance was exhibited by 100 m and 400 m athletes. Endomorphy was low in both groups, especially in 400m runners, who had more elongated body types than 100 m runners. When separately compared by athletic performance quartile, 100 m sprinters of better qualifications (G100-G1) had somatotype with dominant mesomorphy, whereas 400 m runners had somatotype with dominant ectomorphy. A significant correlation (r = -0.55, p=0.008) between calf circumference and 100 m race times was observed showing the importance of muscularity, whereas a significant correlation was found between height and 400 m race times (r = -0.53, p=0.02) showing the importance of linearity. Conclusion: Runners of 100 and 400 may show differences in physical characteristics, depending on the level of athletic performance. Anthropometric periodic evaluations may help in the training process of these athletes. However, more specific assessment parameters should be taken into account, because somatotype by itself has not power to predict whether an individual will succeed in racing speed

Estratégias de aplicações sequenciais e paralelas da metaheurística otimização por enxame de partículas ao problema do caixeiro viajante

Particle Swarm Optimization is a metaheuristic that arose in order to simulate the behavior of a number of birds in flight, with its random movement locally, but globally determined. This technique has been widely used to address non-liner continuous problems and yet little explored in discrete problems. This paper presents the operation of this metaheuristic, and propose strategies for implementation of optimization discret problems as form of execution parallel as sequential. The computational experiments were performed to instances of the TSP, selected in the library TSPLIB contenct to 3038 nodes, showing the improvement of performance of parallel methods for their sequential versions, in executation time and results

Estudo e caracterização de matérias-primas para o desenvolvimento de blocos sílico-calcários

The types of products manufactured calcium silicate blocks are very diversified in its characteristics. They include accessory bricks, blocks, products in dense material, with or without reinforcements of hardware, great units in cellular material, and thermal insulating products. The elements calcium silicate are of great use in the prefabricated construction, being formed for dense masses and hardened by autoclaving. This work has for objective develop formulations that make possible the obtaining of calcium silicate blocks with characteristics that correspond the specifications technical, in the State of the Rio Grande of the North, in finality of obtaining technical viability for use in the civil construction. The work studied the availability raw materials from convenient for the production of calcium silicate blocks, and the effect of variations of the productive process on the developed products. The studied raw materials were: the quartz sand from the city of São Gonçalo do Amarante/RN, and two lime, a hydrated lime and a pure lime from the city of Governador Dix-Sept Rosado/RN. The raw materials collected were submitted a testes to particle size distribution, fluorescence of X rays, diffraction of X rays. Then were produced 8 formulations and made body-of-test by uniaxial pressing at 36 MPa, and cured for 7 hours at about 18 kgf/cm2 pressing and temperature of approximately 180 °C. The cure technological properties evaluated were: lineal shrinkage, apparent density, apparent porosity, water absorption, modulus of rupture flexural (3 points), resistance compression, phase analysis (XRD) and micromorphological analysis (SEM). From the results presented the technological properties, was possible say that utilization of hydrated lime becomes more viable its utilization in mass limestone silica, for manufacture of calcium silicate blocks

Estudo comparativo da marcha de indivíduos hemiparéticos no solo e na esteira

The purpose of the study was to compare hemiparetic gait overground and on the treadmill. Seventeen chronic stroke patients were included in the study. They walked overground and on a treadmill level at the same speed. The Qualisys Medical AB motion analysis system was used to quantify the joint kinematic of the paretic lower limb and the spatio-temporal parameters on the two conditions: overground walking and treadmill walking on three samples of 5-minutes. During the first sample, the subjects walked on the treadmill with greater cadence, shorter stride length, shorter step time on the lower paretic limb, greater range of motion in the hip and knee, greater knee flexion at the initial contact, more extension of the knee and lower dorsiflexion of the ankle at the stance phase. It is important to emphasize that the maximal knee flexion and ankle dorsiflexion just occurred later on the treadmill. Comparisons between each walking sample on the treadmill hadn t revealed any changes on the gait parameters over time. Nonetheless, when analyzing the third walking sample on the treadmill and overground, some variables showed equivalence as such as the total range of motion of the hip, the knee angle at the initial contact and its maximal extension at the stance phase. In summary, walking on a treadmill, even thought having some influence on the familiarization process, haven t demonstrated a complete change in its characteristics of hemiparetic chronic patients

Mortalidade segundo sua causa de morte e seus determinantes: uma análise para as capitais brasileiras e municípios do nordeste do Brasil, 2000 e 2010

This dissertation considered the development of two papers, both related to mortality in Brazil. In the first article, "The context of mortality according to the three broad groups of causes of death in Brazilian capitals, 2000 and 2010", the objective was to analyze the mortality rate according to the three major groups of causes of death in Brazilian capitals. In the second article, "Typology and characteristics of mortality from external causes in the municipalities in the Northeast of Brazil, 2000 and 2010", it was built up a typology for the Northeastern municipalities taking into account information on mortality from external causes and a set of indicators related to socioeconomic, demographic, and infrastructure aspects of such municipalities, both articles for the years 2000 and 2010. Thus, we used data from the Mortality Information System of the Ministry of Health. Furthermore, it was used information from the Demographic Census for those years. The variables relating to socioeconomic and demographic conditions used in this study were those available on the home page of the United Nations Program for Development. The variables relating to socioeconomic and demographic conditions used in this study were those available on the home page of the United Nations Program for Development. Was used in Article 1 the pro-rata distribution method to accomplish the redistribution of ill-defined causes. Moreover, made use of the technique of cluster analysis with the aim of grouping the capital that had proportions of deaths from ill-defined causes similar to each other. Already in Section 2, we used the technique of Empirical Bayesian estimation; spatial statistics technique; and finally, the Grade of Membership method to find types of municipalities from information on mortality from external causes associated with socioeconomic, demographic and infrastructure variables. As the main results, it stands out in Article 1, in relation to data quality, we observed the formation of four groups of similar capital between themselves, as the proportion of illdefined causes. Regarding the behavior of mortality, according to the three major groups of causes of death, it was noted both for 2000 and for 2010 the prevalence of deaths from noncommunicable diseases for both sexes, although the reduction was identified rates in some of the capitals. Communicable diseases stood out as the second cause of death among women. Also, we found that deaths due to external causes are responsible for the second cause of death among men, as well as presenting an increase among women. As for the Article 2, stands out, in general, not just an extension of mortality from external causes in the municipalities, as well as an enlargement of the configurator stain existence of external cause deaths for the whole area of Northeast. Regarding the typology of municipalities, three vi extreme profiles were buit: the profile 1, which comprises municipalities with high rates of mortality from external causes and the best social indicators; the profile 2, that was composed of municipalities that are characterized by having low mortality rates from external causes and the lowest social indicators; and the profile 3, that brings together municipalities with intermediate mortality rates and median values considered in relation to social indicators. Although we have not seen changes in the characteristics of the profiles, we observed an increase in the proportion of municipalities that belong to the extreme profile 3, taking into account the mixed profiles.

Morfometria, variação anual no peso e demografia do Tico-tico-rei-cinza (Lanio pileatus: thraupidae) em dois ambientes de caatinga no nordeste do Brasil

The caatinga is considered the only exclusively Brazilian biome, with a total area of 735.000km². It is estimated that about 59% of this area has already been removed and only 2% are protected in conservations units. The region is characteristic by strong seasonality and heterogeneity in their environments. This paper sets generate information on morphological and population patterns Lanio pilatus in two areas of caatinga of Estação Ecológica do Seridó (ESEC – Seridó), Serra Negra do Norte - RN. Data collection was performed in six phases between July 2012 and December 2014, covering the end of the dry and rainy seasons in the region. The captures were performed with nets and individuals captured were marked with metal rings and measured (weight, wing length, tail, tarsus, culmen and tip of the bill to nostril). Through these measures, we observed that only males of open area range in weight during the dry and rainy season, youngs were significantly lower for all parameters measured, and males were larger than females in three characteristics (weight, wing length and tail) in open area and only one (wing length) in the closed area. The population parameters were generated from the mark-capture-recapture technique by program MARK, using the techniques of robust design and CJS. The survival probability of detection and population estimates varied with time. Only individuals of open area fluctuated in their estimates during the study. Overall, the environment was a great mediator of results which increases the need for more studies on the life history of the species in the region.

Usos de membranas de quitosana na remoção de cobre em águas residuais

In this work a chitosan (CS) ionically crosslinked were manufactured by treatment with sulfuric acid solution for application in the treatment of wastewater from oil industry. Two crosslinking process were developed: homogeneous and heterogeneous. In the homogeneous process the ratio molar of SO42-/ NH3+ (1:6 and 1:4) were the variable analyzed, denominated CS16 and CS14 respectively. In the heterogeneous process the soaking time of the membranes in sulfuric acid solution were the variable studied, being used times of 5 (CS5) and 30 (CS30) minutes. FTIR-ATR results indicated no changes in the characteristics of chitosan after homogeneous crosslinking process, while heterogeneous crosslinking showed formation of ionic bonds between protonated groups from chitosan and the crosslinking agent sulfate ions. TG/DTG and XRD analysis confirmed the formation of these interactions, as also shown the new structure on the surface region of CS5 and CS30 membranes compared to CS, CS16 e CS14. Swelling test in aqueous medium have shown that crosslinking process reduced the membrane sorption capacity. Swelling test in acid medium demonstrated that CS16 and CS14 membranes increasing the adsorption capacity up to a maximum percentage of 140% approximately, whereas the CS5 e CS30 reached a maximum of 60%. The mechanical properties indicated the stiff and ductile behavior of crosslinked membrane. Adsorption experiments of CuCl2 results that CS16 membranes reached the efficiency maximum with 73% of copper removal at pH 5.0 and 87% at pH 4.0. The experiments with CuSO4 also obtained efficiency maximum to the CS16 membrane and 80% to the removal of Cu2+ ions. Also was verified that the increase of concentration and temperature cause a decrease in the adsorption capacity for all membranes. Kinetics study indicated that pseudo-second-order obtained characterized better the membranes. Equilibrium studies demonstrated that the CS, CS16 and CS14 follow the Langmuir model, whereas CS5 and CS30 follows Freundlich model. Filtration experiments results with rejection maximum to the CS16 and CS5 membranes, reaching 92 and 98% respectively.

Usos de membranas de quitosana na remoção de cobre em águas residuais

In this work a chitosan (CS) ionically crosslinked were manufactured by treatment with sulfuric acid solution for application in the treatment of wastewater from oil industry. Two crosslinking process were developed: homogeneous and heterogeneous. In the homogeneous process the ratio molar of SO42-/ NH3+ (1:6 and 1:4) were the variable analyzed, denominated CS16 and CS14 respectively. In the heterogeneous process the soaking time of the membranes in sulfuric acid solution were the variable studied, being used times of 5 (CS5) and 30 (CS30) minutes. FTIR-ATR results indicated no changes in the characteristics of chitosan after homogeneous crosslinking process, while heterogeneous crosslinking showed formation of ionic bonds between protonated groups from chitosan and the crosslinking agent sulfate ions. TG/DTG and XRD analysis confirmed the formation of these interactions, as also shown the new structure on the surface region of CS5 and CS30 membranes compared to CS, CS16 e CS14. Swelling test in aqueous medium have shown that crosslinking process reduced the membrane sorption capacity. Swelling test in acid medium demonstrated that CS16 and CS14 membranes increasing the adsorption capacity up to a maximum percentage of 140% approximately, whereas the CS5 e CS30 reached a maximum of 60%. The mechanical properties indicated the stiff and ductile behavior of crosslinked membrane. Adsorption experiments of CuCl2 results that CS16 membranes reached the efficiency maximum with 73% of copper removal at pH 5.0 and 87% at pH 4.0. The experiments with CuSO4 also obtained efficiency maximum to the CS16 membrane and 80% to the removal of Cu2+ ions. Also was verified that the increase of concentration and temperature cause a decrease in the adsorption capacity for all membranes. Kinetics study indicated that pseudo-second-order obtained characterized better the membranes. Equilibrium studies demonstrated that the CS, CS16 and CS14 follow the Langmuir model, whereas CS5 and CS30 follows Freundlich model. Filtration experiments results with rejection maximum to the CS16 and CS5 membranes, reaching 92 and 98% respectively.

Atuação e desempenho do Ministério Público do Estado do Rio Grande do Norte no contexto da gestão pública: perspectiva estratégica

The present dissertation analyzes the performance and acting of the Rio Grande do Norte Public Ministery, in the strategic perspective, while responsible Institution for the defense of the collective rights. The comprehension of this theme inserts in a context of modernization of the public administration, in which is inserted, as well as their functional and structural changes, in a reality of innovations there is passing the organizations, looking to rescue the legitimacy of the government organizations, aligning them to the democratic values of the society. It detaches the strategic administration and the public administration and it exposes the strategic performance about the central point of the study, focusing in the development of the organization in the last four years, and other relative subjects to the acting. It is a unic case study, framed in the characteristics of the qualitative approaches - descriptive and exploratory. The analysis showed, through the method of content analysis, by the criterion of thematic categorization, that MP / RN come developing in an intense way,and it detaches that the changes already happened reflect a good strategic acting of the Institution, especially in the structural and functional areas, showing the strategic conscience of this, although that is not still enough to consider it as a strategic organization, and it concludes that there is still a lot for doing, and that the occurrence of an administration typically strategic in the extent of MP/RN is possible, with the conscience and participation of all, members and servants

Estudo da síntese e propriedade magnética de ferritas de manganês/cobalto dopadas com níquel

For the chemical method of synthesis of co-precipitation were produced ferrite powders manganese-cobalt equal stoichiometric formula Mn (1-x) Co (x) Fe2O4, for 0 < x < 1, first reagent element using as the hydroxide ammonium and second time using sodium hydroxide. The obtained powders were calcined at 400 ° C, 650 ° C, 900 ° C and 1150 ° C in a conventional oven type furnace with an air atmosphere for a period of 240 minutes. Other samples were calcined at a temperature of 900 ° C in a controlled atmosphere of argon, to evaluate the possible influence of the atmosphere on the final results the structure and morphology. The samples were also calcined in a microwave oven at 400 ° C and 650 ° C for a period of 45 minutes possible to evaluate the performance of this type of heat treatment furnace. It was successfully tested the ability of this group include isomorphic ferrite with the inclusion of nickel cations in order to evaluate the occurrence of disorder in the crystalline structures and their changes in magnetic characteristics.To identify the structural, morphological, chemical composition and proportions, as well as their magnetic characteristics were performed characterization tests of X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive spectroscopy (EDX), thermogravimetric (TG), vibrating sample magnetometry (MAV) and Mössbauer spectroscopy. These tests revealed the occurrence of distortion in the crystal lattice, changes in magnetic response, occurrence of nanosized particles and superparamagnetism