Influência da sequência de empilhamento nas propriedades mecânicas de laminados compósitos submetidos à tração

Composite laminates with plies in different directions finely dispersed are classified as homogenized. The expected benefits of homogenization include increased mechanical strength, toughness and resistance to delamination. The objective of this study was to evaluate the effect of stacking sequence on the tensile strength of laminates. Composite plates were fabricated using unidirectional layers of carbon/epoxy prepreg with configurations [903/303/-303]S and [90/30/-30]3S. Specimens were subjected to tensile and open hole tension (OHT) tests. According to the experimental results, the mean values of strength for the homogenized laminates [90/30/-30]3S were 140% and 120% greater for tensile and OHT tests, respectively, as compared to laminates with configuration [903/303/-303]S. The increase in tensile strength for more homogenized laminates was associated with the increment in interlaminar interfaces, which requires more energy to produce delamination, and the more complicated crack propagation through plies with different orientations. OHT strength was not affected by the presence of the hole due to the predominance of the interlaminar shear stress in relation to the stress concentration produced by the hole

Aspectos cognitivos dos manuais de instruções: um estudo de caso em aparelhos de DVD

This work aims to present an investigation on the level of understanding in the informative texts enclosed in manuals of instructions of a DVD set, trying to identify what makes consumers use or not manuals of instructions which accompany the products. It analyses factors that affect the motivation to use manuals and, linguistically, to verify whether the language used in the manuals is adapted for the understanding of the information by the consumer. Under an ergonomic approach, the research tries to recognize whether it is accordance in the information contained in manuals. According to the production engineering, it is very important to insert the best production practical and administration of the product in the companies, aiming the best competitiveness, The present study suggests a route to evaluate manuals of instructions of a DVD set, using for that a questionnaire with closed questions and an open one, applied to students, employees and teachers of an agricultural school bonded to Rio Grande do Norte Federal University. The results can contribute to provide helps to industry in presentation quality betterment of its information, and becoming the consumer integral part of that improvement process

Influência da sequência de empilhamento nas propriedades mecânicas de laminados compósitos submetidos à tração

Composite laminates with plies in different directions finely dispersed are classified as homogenized. The expected benefits of homogenization include increased mechanical strength, toughness and resistance to delamination. The objective of this study was to evaluate the effect of stacking sequence on the tensile strength of laminates. Composite plates were fabricated using unidirectional layers of carbon/epoxy prepreg with configurations [903/303/-303]S and [90/30/-30]3S. Specimens were subjected to tensile and open hole tension (OHT) tests. According to the experimental results, the mean values of strength for the homogenized laminates [90/30/-30]3S were 140% and 120% greater for tensile and OHT tests, respectively, as compared to laminates with configuration [903/303/-303]S. The increase in tensile strength for more homogenized laminates was associated with the increment in interlaminar interfaces, which requires more energy to produce delamination, and the more complicated crack propagation through plies with different orientations. OHT strength was not affected by the presence of the hole due to the predominance of the interlaminar shear stress in relation to the stress concentration produced by the hole

Cooperação e competição entre políticas no Brasil: os cursos da governabilidade no presidencialismo da catalização

Public policies have been studied in the various fields of humanities and social sciences, from different theoretical and technical aspects. However, there is still a lack of studies that incorporate the dimension that encompasses the political action and its interference in such actions, also recognizing the importance of the institutional setting of the Brazilian presidential model in implementing these policies. This fragmented and multiparty system has led to power heterogeneous sets of political parties. Thus, the ministerial offices, more than assisting the President´s government project, manage particularized agendas, which are party biased and have the influence of interest groups in hegemonic themes addressed by government agencies. When these agendas operate in sectoral and specialized policies, the friction level is apparently low. However, when this occurs in intersectoral actions, such as in regional development, there is evidence of strong signs of competition among government agencies, which in theory, should operate in an integrated manner. Although this is not a specific feature of Luiz Inacio Lula da Silva´s government- the period to be studied- there was similar behavior in Fernando Henrique Cardoso´s presidency, one realizes that the expansion of coalition on behalf of governance is increasingly interfering in the outcome of intersectoral public policies, due to these multiple arguments in action. In order to understand these processes, this study focused on the Sustainable and Integrated Development Programme for Differentiated Meso-Regions (PROMESO), part of the National Policy for Regional Development (NPRD). The program provides interface with various government agencies and their public policies in a clear intersectoral design. The research sought to identify and analyze the relationships between government agencies and their programs with interest groups, whether political parties or other segments of civil society, highlighting the logic of favoritism, which poses in second place the integration of actions in the intersectoral policies. Therefore, besides the theoretical debate that incorporates several categories of political science, public administration, public policy, geography and economics, the study focused on secondary sources, using different government agencies databases in order to raise information. It was observed that the interference of partisan politics has been disastrous for some public policies. Thus, the research confirms that cooperative character is fragile within government agencies, often limited to official documents, and that there is indeed, a striking feature of competition, especially when it comes to transversalized policies

Mapeando fundamentos do Constructo Neuromarketing com profissionais de empresa de publicidade

This study aims to acknowledge the domain level and influence of the neuromarketing construct. This is done considering professionals at advertising agencies in Brazil. The presence of concepts related to this new approach is very little divulged, and there are little analysis performed on this area. Thus, the research is of qualitative and exploratory nature and used as primary fonts books, articles related to marketing, neuroscience, and psychology as well as secondary fonts. A profound interview was realized aiming the main advertising agencies in Brazil. The public was composed by managers responsible for planning. A content analysis was performed afterwards. The advances related to the brain science have permitted the development of technological innovation. These go primarily towards knowledge and unconscious experiences of consumers, which are responsible for the impulse of decision making and consumer behavior. These issues are related to Neuromarketing, that in turn, uses techniques such as FMRI, PET and FDOT. These scan the consumer s brain and produces imagines on the neuron s structures and functioning. This is seen while activities such as mental tasks for the visualization of brands, images or products, watching videos and commercials are performed. It is observed that the agencies are constantly in search of new technologies and are aware of the limitations of the current research instruments. On the other hand, they are not totally familiar with concepts related to neuromarketing. In relation to the neuroimage techniques it is pointed out by the research that there is full unawareness, but some agencies seem to visualize positive impacts with the use of these techniques for the evaluation of films and in ways that permit to know the consumer better. It is also seen that neuroimage is perceived as a technique amongst others, but its application is not real, there are some barriers in the market and in the agencies itself. These barriers as well as some questioning allied to the scarce knowledge of neuromarketing, make it not possible to be put into practice in the advertising market. It is also observed that even though there is greater use of neuromarketing; there would not be any meaningful changes in functioning and structuring of these agencies. The use of the neuro-image machines should be done in research institutes and centers of big companies. Results show that the level of domain of the neuromarketing construct in the Brazilian advertising agencies is only a theoretical one. Little is known of this subject and the neurological studies and absolutely nothing of neuroimage techniques

Os efeitos das reclamações online na lealdade dos consumidores: um estudo experimental

In an environment of constant change, technological developments, market competition and more informed consumers, the search for a lasting relationship through the conquest of loyalty has become the objective of companies. However, several authors suggest that this loyalty can be affected by negative comments available on the internet. Therefore, this dissertation has as objective to examine if the complaints are available on the internet impact the loyalty to a brand of mobile phone. The research used as the basis the Expanded NCSB model suggest by Johnson et al. (2001), studying five prominent drives of loyalty: image/brand reputation, affective commitment, calculative commitment, perceived value and trust, beyond the satisfaction construct as moderator variable. The research method adopted was the experimental design which included 285 undergraduate students, with the trial which included 285 undergraduate students, with the field study of the mobile industry, specifically, the brands of cell phones. The research approach was quantitative and methods were descriptive statistics, factor analysis, cluster analysis, linear regression and non-parametric test of Wilcoxon for data analysis. Of the 16 hypothesis stemmed from the research model proposed, 12 were confirmed. The results showed that the complaint available on the internet, here represented by the available on the site Reclame Aqui, may impact consumer perceptions about brand loyalty, as well as its antecedents, being that these complaints can affect all the consumers, regardless of historical satisfaction with the brand. It also noted the positive relationship between the independent variables trust, image/brand reputation, perceived value, affective commitment and calculative commitment and the dependent variable - loyalty, even when considering the data obtained after exposure to the complaint. However, no unanimous conclusion that the relationship between these variables was strongest in the group with satisfactory experience. At the first moment of the research, the trust was the most important variable for the formation of loyalty. However, after exposure to treatment, the image/brand reputation, was more relevant. Contributions of the study, limitations and recommendations for future researches are approached in the present investigation

O teatro do oprimido e sua contribuição na formação da criança com transtorno do déficit de atenção com hiperatividade

This research investigates and reports the contributions of the Theatre of the Oppressed and its techniques as a therapeutic resource in the education of children with Attention Deficit Disorder with Hyperactivity. In the first chapter organize one studying theoretical seeking to conceptualize and understand the Learning, Attention Deficit Hyperactivity Disorder, seeking to better understand the behavior and the behavior of children with ADHD. Researching on the symptoms, causes and effects of this syndrome. Trace a relationship between familyschool- specialists in an attempt to prove the importance of family support in the teachinglearning process and treatment of these children. In the second chapter start conceptualizing theater, the relationship between work-Theatre-Education Therapy, explain the difference between the theatrical stage and the therapeutic stage. Account the importance of theater games in the classroom and its contribution to social and educational training of the child. Justify the choice of the Theatre of the Oppressed recognizing him as the primary method for this research, because it is a set of exercises, games and techniques that help the child regain equilibrium relations, developing autonomy, encourages creativity and spontaneity, freeing them from their oppression. Besides being an efficient transformation behavior, improving behavior, allowing the inclusion of children in society. It is verified the effectiveness of the method and techniques in their work with children Municipal School Professor. Antonio Severiano in Natal / RN, allowing these children develop body awareness, working senses, thought, memory, inhibition, teaching to expose your point of view, understand and deal with their emotions, respecting its limits and develop their motor and cognitive skills

Estudo da adição de argila expandida na formulação de concretos leves

Lightweight concrete has been the subject of several studies towards the development of new building materials. Emphasis has been given on the particle size effect and nature of aggregates used as raw materials. The present study includes an analysis of the materials that make this kind of concrete, analyzes of mechanical properties such as compressive and tensile strength, in addition to assessments of the interface concrete aggregate/matrix interface, porosity and absorption profile of chloride ions in lightweight concrete based on expanded clay. The experiments were carried out by molding cylindrical samples 100 mm in diameter and 200 mm in height. The dosage experiments were performed without additives or with the addition of minerals: (T1) 1: 2.01: 1.10: 0.78 (T2) 1: 2.00: 1.32 : 0.62 - (T3) 1 :1.93 :1.54: 0.47 (cement : sand : expanded clay 0500 : expanded clay 1506).The water to cement ratio was set to 0.43. Expanded clay minerals with different average particle sizes were used, i.e., 9.5 mm/0500 and 19 mm/1506. The larger aggregate was coated by a glassy layer, yielding lower water absorption characteristics to the concrete. The results showed that the use of light expanded clay aggregates is a technically interesting solution to the production of lightweight concrete for construction applications

Análise do comportamento reológico de pastas de cimento contendo resíduos de pneu para poços de petróleo

The low tenacity presented by the Portland cement pastes used in the oil wells cementation has been motivating several researches with attention focused on alternative materials. Additives have been developed to generate flexible pastes with mechanical resistance capable to support the expansions and retractions of the metallic covering of the wells that submit to the steam injection, technique very used to increase the recovery factor in oil reservoirs with high viscosity. A fresh paste with inadequate rheological behavior may commit the cementation process seriously, involving flaws that affect the performance of the paste substantially in the hardened state. This work proposes the elaboration and the rheological analysis of Portland cement pastes with addition of residues of rubber tire in several proportions, with the aim of minimizing the damages provoked in the hem cementing of these wells. By thermogravimetric analysis, the particles of eraser that go by the sieve of 0,5mm (35 mesh) opening and treated superficially with NaOH solution of 1 mol/L presented appropriate thermal resistance for wells that submit to thermal cyclic. The evaluation of the study based on the results of the rheological analysis of the pastes, complemented by the mechanical analysis, thickening, stability, tenor of free water and filtrate loss, being used as parameter a paste reference, without rubber addition. The results showed satisfactory rheology, passive of few corrections; considerable loss of mechanical resistance (traction and compression), compensated by earnings of tenacity, however with established limits for its application in oil wells; satisfactory stability, free water and thickening time

Análise de propriedades térmicas e mecânicas de compósitos de argamassa e resíduo de borracha

Although already to exist alternative technique and economically viable for destination of used tires, quantitative data on properties of constructive elements that use the rubber waste as aggregate still are restricted. In the present work, the waste proceeding from industry of retreading as material for manufacture of composite destined to the production of constructive elements was considered. Mechanical and thermal properties of mortar had been analyzed Portland cement with addition of waste without treatment, in the ratios of 10%, 20% and 30% in mass in relation to the mass of the cement, substituting the aggregate in the trace in mortar 1:5 mass cement and sand. The size of the used residue varied between 0,30mm and 4,8mm (passing in the bolter 4,8mm and being restrained in the one of 0,30mm), being it in the formats fibers and granular. The influences of the size and the percentage of residue added to the mortar (in substitution to the aggregate) in the thermal and mechanical properties had been considered. Assays of body-of-test in thestates had been become fullfilled cool (consistency index) and hardened (absorption of water for capillarity, strength the compression, traction and strength flexural). The work is centralized in the problem of the relation thermal performance /strength mechanics of used constructive systems in regions of low latitudes (Been of the Piauí), characterized for raised indices of solar radiation.

Estudo do comportamento plástico, mecânico, microestrutural e térmico do concreto produzido com resíduo de porcelanato

Population growth experienced in major cities, allied to society s need of infra-structure, especially ones related to habitational demands, increases the consumption of construction materials. As a consequence, consumption of natural resources itself. Thus, due to this process, concrete is one of the most produced materials in civil construction. This is also due to the great diversity of its application, easiness in its execution and adequate mechanical performance, as well as low production costs. Following the same tendencies in construction development, the ceramic industry has intensified the production of porcelain ceramic tiles and floors. These are achieved by a fine finishing and receive polishing at the end of the fabrication process. This work researched the use of porcelain residues in polishing for the production of concrete. All of which; due to economical and environmental issues. This process aims to prove adequate destiny for this type of residue, due to environmental issues, incorporating it to the concrete itself; all of which provides economy in consumption of the materials that constitute concrete. Thus, the main characteristics of concrete were investigated through the inclusion of different concentration of the porcelain residue as additional trait element. The residue rates incorporated to the trait varied from 10% to 50% in relation to the cement mass, in the traits with plastic additives and without plastic additives. It is observed that the inclusion of porcelain residue produced a meaningful alteration in the consistency of fresh concrete. This residue has a fine granulometry and it considerably absorbed the water used in the concrete spreading, influencing the way this material is dealt with. Thus, the value of cement striking decreases with the increase of residues present in trait. The maximal incorporation of the residue was of 50%, massively, for the same factor water/initial cement. The use of residues in concrete results in an 40% increase in the compression resistance. It is also proportional to residue concentration of porcelain in the trait. The microstructure was also favored once porosity and concrete absorption decreases with the use of this residue. The parameters demonstrate the quality and durability of the concrete produced with this residue. The use of porcelain residue in concrete composition has not produced meaningful thermal behavior changes. Thermal conductivity, heat capacity and thermal diffusivity have been maintained basically constant

Desenvolvimento de tubulação em compósito polimérico revestida externamente com poliuretano de alta densidade

Pipelines for the transport of crude oil from the production wells to the collecting stations are named production lines . These pipes are subjected to chemical and electrochemical corrosion according to the environment and the type of petroleum transported. Some of these lines, depending upon the composition of the fluid produced, may leak within less than one year of operation due to internal corrosion. This work aims at the development of composite pipes with an external protecting layer of high density polyurethane for use in production lines of onshore oil wells, meeting operational requirements. The pipes were manufactured using glass fibers, epoxy resin, polyester resin, quartz sand and high density polyurethane. The pipes were produced by filament winding with the deposition of high density polyurethane on the external surface and threaded ends (API 15 HR/PM-VII). Three types of pipes were manufactured: glass/epoxy, glass/epoxy with an external polyurethane layer and glass/epoxy with an intermediate layer of glass fiber, polyester, sand and with an external polyurethane layer. The three samples were characterized by Scanning Electronic Microscopy (SEM) and for the determination of constituent content. In addition, the following tests were conducted: hydrostatic test, instant rupture, shorttime failure pressure, Gardner impact, transverse stiffness and axial tension. Field tests were conducted in Mossoró RN (BRAZIL), where 1,677 meters of piping were used. The tests results of the three types of pipes were compared in two events: after two months from manufacturing of the samples and after nine months of field application. The results indicate that the glass/epoxy pipes with an intermediate layer of fiber glass composite, polyester e sand and with an external layer of high density polyurethane showed superior properties as compared to the other two and met the requirements of pressure class, axial tensile strength, transverse stiffness, impact and environmental conditions, for onshore applications as production lines

Desevolvimento de nanocompósitos de poli(metacrilato de metila)/argila processados por mistura no estado fundido

Poly(methyl methacrylate)/clay nanocomposites were prepared by melt mixing using a montmorillonite-rich clay (MMT). The clay in natura was treated with acrylic acid to facilitate the dispersion in the polymer matrix. A masterbatch of PMMA/clay was prepared and combined with the pure PMMA and then subjected to extrusion process using singlescrew and twin-screw extruders followed by injection. Nanocomposites were processed with clay contents of 1, 3, 5 and 8 wt.%. The effect of shear processing on the morphology of the nanocomposites was evaluated by XRD, SEM and TEM. Thermal and mechanical properties of the nanocomposites were investigated through TGA, DSC, HDT, VICAT, tensile and impact tests, to evaluate the effect of the addition of clay to the PMMA matrix. Flammability tests were also conducted to investigate the effect of the addition of clay on the flame retardation properties. SEM images of the nanocomposites indicated the presence of clay agglomerates, which resulted in the reduction of properties such as thermal stability, mechanical strength and impact resistance, and increased the rate of burning for materials processed by both extrusion routes

Aproveitamento de resíduos minerais na formulação de argamassas para a construção civil

Current environmental concerns include the excessive consumption and inefficient use of non-renewable natural resources. The construction industry is considered one of the largest consumers of natural raw materials, significantly contributing to the environmental degradation of the planet. The use of calcareous quarry (RPPC) and porcelain tile polishing residues (RPP) as partial replacements of the cement in mortars is an interesting alternative to minimize the exploration of considerably large amounts of natural resources. The present study aimed at investigating the properties of fresh and hardened mortars produced using residues to replace cement. The residues used were fully characterized to determine their specific mass, unitary mass, particle size distribution and morphology, and composition. The performance of the mortars was compared to that of reference compositions, prepared without residues. A total of 18 compositions were prepared, 16 using residues and 2 reference ones. The mortars were prepared using Portland CP II F 32 cement, CH I hydrated lime, river sand and tap water. The compositions of the mortars were 1:1:6 and 1:0.5:4.5 (vol%), and water to cement ratios of 1.87 and 1.45 were used, respectively. The mortars in the fresh state were evaluated by consistency index, water retention, density of mass and incorporated air content tests. In their hardened state, the mortars were evaluated by apparent mass density, modulus of elasticity, flexural tensile strength, compressive strength and water absorption by capillarity. The mortars were also analyzed by scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction and fluorescence. Finally, they were classified according to NBR 13281 standards. The mortars prepared using residues partially replacing the cement exhibited lower modulus of elasticity compared to the reference compositions, thus improving the performance in their intended use. On the downside, the water absorption by capillarity was affected by the presence of residues and both the tensile and compressive strength were reduced. However, from the overall standpoint, the replacement of cement by calcareous quarry or porcelain tile polishing residues did not result in significant changes in the properties of the mortars. Therefore, compositions containing these residues can be used in the construction industry

Estudo e desenvolvimento de um capacitor eletrolítico de nióbio

It seeks to find an alternative to the current tantalum electrolytic capacitors in the market due to its high cost. Niobium is a potential substitute, since both belong to the same group of the periodic table and because of this have many similar physical and chemical properties. Niobium has several technologically important applications, and Brazil has the largest reserves, around 96%. There are including niobium in reserves of tantalite and columbite in Rio Grande do Norte. These electrolytic capacitors have high capacitance specifies, ie they can store high energy in small volumes compared to other types of capacitors. This is the main attraction of this type of capacitor because is growing demand in the production of capacitors with capacitance specifies increasingly high, this because of the miniaturization of various devices such as GPS devices, televisions, computers, phones and many others. The production route of the capacitor was made by powder metallurgy. The initial niobium powder supplied by EEL-USP was first characterized by XRD, SEM, XRF and laser particle size, to then be sieved into three particle size, 200, 400 e 635mesh. The powders were then compacted and sintered at 1350, 1450 and 1550°C using two sintering time 30 and 60min. Sintering is one of the most important parts of the process as it affects properties as porosity and surface cleaning of the samples, which greatly affected the quality of the capacitor. The sintered samples then underwent a process of anodic oxidation, which created a thin film of niobium pentóxido over the whole porous surface of the sample, this film is the dielectric capacitor. The oxidation process variables influence the performance of the film and therefore the capacitor. The samples were characterized by electrical measurements of capacitance, loss factor, ESR, relative density, porosity and surface area. After the characterizations was made an annealing in air ate 260ºC for 60min. After this treatment were made again the electrical measurements. The particle size of powders and sintering affected the porosity and in turn the specific area of the samples. The larger de area of the capacitor, greater is the capacitance. The powder showed the highest capacitance was with the smallest particle size. Higher temperatures and times of sintering caused samples with smaller surface area, but on the other hand the cleaning surface impurities was higher for this cases. So a balance must be made between the gain that is achieved with the cleaning of impurities and the loss with the decreased in specific area. The best results were obtained for the temperature of 1450ºC/60min. The influence of annealing on the loss factor and ESR did not follow a well-defined pattern, because their values increased in some cases and decreased in others. The most interesting results due to heat treatment were with respect to capacitance, which showed an increase for all samples after treatment