Aquisição e construção de modelos estáticos análogos a reservatórios petrolíferos com tecnologia lidar e georadar

The present work develops a methodology to establish a 3D digital static models petroleum reservoir analogue using LIDAR and GEORADAR technologies. Therefore, this work introduce The methodolgy as a new paradigm in the outcrop study, to purpose a consistent way to integrate plani-altimetric data, geophysics data, and remote sensing products, allowing 2D interpretation validation in contrast with 3D, complexes depositional geometry visualization, including in environmental immersive virtual reality. For that reason, it exposes the relevant questions of the theory of two technologies, and developed a case study using TerraSIRch SIR System-3000 made for Geophysical Survey Systems, and HDS3000 Leica Geosystems, using the two technologies, integrating them GOCAD software. The studied outcrop is plain to the view, and it s located at southeast Bacia do Parnaíba, in the Parque Nacional da Serra das Confusões. The methodology embraces every steps of the building process shows a 3D digital static models petroleum reservoir analogue, provide depositional geometry data, in several scales for Simulation petroleum reservoir

Desenvolvimento de um sistema para análise de integridade estrutural de equipamentos estáticos baseado em cad vps micro cracks e ultrassom

In general, the designs of equipment takes into account the effects and processes of deterioration it will undergo and arrives at an approximate useful life. However, changes in operational processes and parameters, the action of external agents, the kind of maintenance conducted, the means of monitoring, and natural and accidental occurrences completely modify the desired performance of the equipment. The discontinuities that occur in anisotropic materials often and due to different factors evolve from being subcritical to critical acquiring the status of defect and compromising the physical integrity of the equipment. Increasingly sophisticated technological means of detection, monitoring and assessment of these discontinuities are required to respond ever more rapidly to the requirements of industry. This paper therefore presents a VPS (Virtual Pipe System) computational tool which uses the results of ultrasonic tests on equipment, plotting the discontinuities found in models created in the CAD and CAE systems, and then simulates the behavior of these defects in the structure to give an instantaneous view of the final behavior. This paper also presents an alternative method of conventional ultrasonic testing which correlates the integrity of an overlay (carbon steel and stainless steel attached by welding) and the reflection of ultrasonic waves coming from the interface between the two metals, thus making it possible to identify cracks in the casing and a shift of the overlay

Utilizando Pesos estáticos e dinâmicos em sistemas multi-classificadores com diferentes níveis de diversidade

Although some individual techniques of supervised Machine Learning (ML), also known as classifiers, or algorithms of classification, to supply solutions that, most of the time, are considered efficient, have experimental results gotten with the use of large sets of pattern and/or that they have a expressive amount of irrelevant data or incomplete characteristic, that show a decrease in the efficiency of the precision of these techniques. In other words, such techniques can t do an recognition of patterns of an efficient form in complex problems. With the intention to get better performance and efficiency of these ML techniques, were thought about the idea to using some types of LM algorithms work jointly, thus origin to the term Multi-Classifier System (MCS). The MCS s presents, as component, different of LM algorithms, called of base classifiers, and realized a combination of results gotten for these algorithms to reach the final result. So that the MCS has a better performance that the base classifiers, the results gotten for each base classifier must present an certain diversity, in other words, a difference between the results gotten for each classifier that compose the system. It can be said that it does not make signification to have MCS s whose base classifiers have identical answers to the sames patterns. Although the MCS s present better results that the individually systems, has always the search to improve the results gotten for this type of system. Aim at this improvement and a better consistency in the results, as well as a larger diversity of the classifiers of a MCS, comes being recently searched methodologies that present as characteristic the use of weights, or confidence values. These weights can describe the importance that certain classifier supplied when associating with each pattern to a determined class. These weights still are used, in associate with the exits of the classifiers, during the process of recognition (use) of the MCS s. Exist different ways of calculating these weights and can be divided in two categories: the static weights and the dynamic weights. The first category of weights is characterizes for not having the modification of its values during the classification process, different it occurs with the second category, where the values suffers modifications during the classification process. In this work an analysis will be made to verify if the use of the weights, statics as much as dynamics, they can increase the perfomance of the MCS s in comparison with the individually systems. Moreover, will be made an analysis in the diversity gotten for the MCS s, for this mode verify if it has some relation between the use of the weights in the MCS s with different levels of diversity

Uso do GPR na geração de modelos estáticos 3D para o planejamento de lavra de minerais pesados depositados em dunas eólicas

This project was developed as a partnership between the Laboratory of Stratigraphical Analyses of the Geology Department of UFRN and the company Millennium Inorganic Chemicals Mineração Ltda. This company is located in the north end of the paraiban coast, in the municipal district of Mataraca. Millennium has as main prospected product, heavy minerals as ilmenita, rutilo and zircon presents in the sands of the dunes. These dunes are predominantly inactive, and overlap the superior portion of Barreiras Formation rocks. The mining happens with the use of a dredge that is emerged at an artificial lake on the dunes. This dredge removes sand dunes of the bottom lake (after it disassembles of the lake borders with water jets) and directs for the concentration plant, through piping where the minerals are then separate. The present work consisted in the acquisition external geometries of the dunes, where in the end a 3D Static Model could be set up of these sedimentary deposits with emphasis in the behavior of the structural top of Barreiras Formation rocks (inferior limit of the deposit). The knowledge of this surface is important in the phase of the plowing planning for the company, because a calculation mistake can do with that the dredge works too close of this limit, taking the risk that fragments can cause obstruction in the dredge generating a financial damage so much in the equipment repair as for the stopped days production. During the field stages (accomplished in 2006 and 2007) topographical techniques risings were used with Total Station and Geodesic GPS as well as shallow geophysical acquisitions with GPR (Ground Penetrating Radar). It was acquired almost 10,4km of topography and 10km of profiles GPR. The Geodesic GPS was used for the data geopositioning and topographical rising of a traverse line with 630m of extension in the stage of 2007. The GPR was shown a reliable method, ecologically clean, fast acquisition and with a low cost in relation to traditional methods as surveys. The main advantage of this equipment is obtain a continuous information to superior surface Barreiras Formation rocks. The static models 3D were elaborated starting from the obtained data being used two specific softwares for visualization 3D: GoCAD 2.0.8 and Datamine. The visualization 3D allows a better understanding of the Barreiras surface behavior as well as it makes possible the execution of several types of measurements, favoring like calculations and allowing that procedures used for mineral extraction is used with larger safety

Aquisição e construção de modelos estáticos análogos a reservatórios petrolíferos com tecnologia lidar e georadar

The present work develops a methodology to establish a 3D digital static models petroleum reservoir analogue using LIDAR and GEORADAR technologies. Therefore, this work introduce The methodolgy as a new paradigm in the outcrop study, to purpose a consistent way to integrate plani-altimetric data, geophysics data, and remote sensing products, allowing 2D interpretation validation in contrast with 3D, complexes depositional geometry visualization, including in environmental immersive virtual reality. For that reason, it exposes the relevant questions of the theory of two technologies, and developed a case study using TerraSIRch SIR System-3000 made for Geophysical Survey Systems, and HDS3000 Leica Geosystems, using the two technologies, integrating them GOCAD software. The studied outcrop is plain to the view, and it s located at southeast Bacia do Parnaíba, in the Parque Nacional da Serra das Confusões. The methodology embraces every steps of the building process shows a 3D digital static models petroleum reservoir analogue, provide depositional geometry data, in several scales for Simulation petroleum reservoir

Permanências e perspectivas no ensino de projeto de arquitetura no Brasil: uma análise a partir da produção científica dos Seminários UFRGS (1985) e Projetar (2003-2011)

O objeto de estudo desta tese é o ensino de projeto de arquitetura no contexto acadêmico brasileiro. O trabalho procura analisar esse objeto nos aspectos relativos ao ensinar a fazer e ao aprender a fazer , por meio de uma perspectiva epistemológica e cognitiva, a partir da produção científica dos Seminários UFRGS (1985) e Projetar (2003-2011) sob o olhar de três estados constitutivos: conservação, permanência e transformação. A metodologia de investigação é qualitativa e seus pressupostos são investigad os por meio do método hipotético-dedutivo em busca de um conhecimento aproximativo. Dentro do universo pesquisado, as hipóteses conduzem: primeiro, à investigação e caracterização de estruturas que se conservam; segundo, à investigação e levantamento de valores e conceitos que permanecem adequados por sua capacidade de adaptação às mudanças e paradigmas; e, terceiro, por procurarem destacar práticas pedagógicas que indicam novos caminhos na maneira de agir e de se pensar o ensino de projeto de arquitetura. A pesquisa demonstrou que, embora em menores proporções, ainda se conservam ações e posturas pedagógicas que: valorizam os ideais funcionalistas e racionalistas da arquitetura; adotam posturas deterministas, caminhos prescritivos ou intuitivos no ensino da concepção arquitetural; não apresentam clareza metodológica na abordagem da problemática arquitetônica; os contextos urbanos são pouco explorados na experimentação; utilizam um sistema de concepção baseado em princípios estéticos canônicos e universais, sem problematizar as causas da transformação da arquitetura contemporânea e qual o seu papel numa sociedade complexa e diversificada. Com relação às novas perspectivas encontradas, a análise da produção científica demonstrou que a prática pedagógica do ensino de projeto de arquitetura no Brasil passa por transformações críticas valiosas. Essa constatação foi percebida, por meio, também, de reflexões e de práticas pedagógicas que valorizam a integração de conteúdos; que possuem um discurso crítico e conciliador com relação à necessidade de renovação de práticas, paradigmas, meios e conteúdos; que estão abertas às posturas cooperativas e às estratégias para a constituição de um corpo teórico-prático para o ensino do projeto que não se limite ao campo da arquitetura; que reconhecem a importância das novas tecnologias computacionais na concepção projetual e no ensino do projeto, assim como, as tecnologias e estratégias que atualizam as soluções projetuais no uso adequado dos recursos ambientais; que consideram o espaço acadêmico como um lugar propício para as experiências projetuais e pedagógicas; que manifestam um esforço em considerar a participação do usuário, assim como em realizar um processo de apreensão de contextos complexos como objeto de estudo, adotando uma postura de valorização do processo projetual. O trabalho conclui que a educação do arquiteto deve estar atenta aos aspectos relativos à inclusão da realidade sociocultural e ambiental como referência para o fazer arquitetural em detrimento da primazia dada à racionalidade técnica, uma vez que essa realidade permite a mediação, entre o ser e o mundo , como uma estratégia que supera qualquer antecipação programática e viabiliza a transformação e a construção do próprio ser e do mundo . Assim, se o aprender fazendo é necessário para a formação do arquiteto, que esse fazer seja refletido e retroalimente a prática

Casas modernas na orla marítima de João Pessoa 1960 a 1974

This paper studies modern houses built in the neighborhoods of Cabo Branco, Tambaú and Manaíra by the seafront in Joao Pessoa, built between 1960 and 1974. We start from the already widespread notion that Brazilian Modern Architecture was inspired by foreign ways, mainly European but also American here recast, adapted, often innovating repertoire and ideas received (Y. BRUAND, 2005; H. SEGAWA, 2002; C. E. COMAS, 2002; C. E. COMAS, 2002; M. M. ACAYABA e S. FICHER, 1982; M. B. C. ARANHA, 2008; F. C. L. LARA, 2001; R. V. ZEIN, 2005; L. E. AMORIM, 1999, C. V. STINCO, 2010). With this look, after a field study, we collected 61 specimens in the collection of the Central Archive of João Pessoa City Hall, in order to identify which reformulations, adaptations or innovations would exist in modern houses built along the coast in João Pessoa. As we try to analyze the houses by what the bibliography had suggested (G. C. ARGAN, 1992; L. CORBUSIER, 2002; C.E.D. e M. ADRIÀ, 2007; K. FRAMPTON, 1997; H. H. HITCHCOCK, 1976; L. BENEVOLO, 2004; R. DE FUSCO, 1992, N . PEVSNER, 2002; M. RAGON, 1986; B. RISEBERO, 1982; E. ROBBINS, 1997; W. J. R. CURTIS, 1982; V. SCULLY, 2003; B. ZEVI, 1984; D. DUNST, 1999; A. COLQUHOUN, 2002; R. WESTON, 2005; A. IÑAKI, 2006; J. PETER, 1994) the starting idea seemed to us not sufficiently developed. So we decided, first, to undertake a literature review comparing speech and image of modern houses most often cited by international and national literature, following a script freely inspired the Vitruvian triad: the functional and spatial (sectorization, guidance, spatiality, movement); constructive aspects (structural elements, modulation, deck, sealing), and aesthetic aspects (composition, apertures, ornaments) (Cap.1), then cast a look under this same route in 61 specimens obtained initially, trying to verify any specificities they would have (Cap.2). Failing to deepen the analysis of all these examples, we chose 10 projects which were redesigned and described in more detail to which we supplement with the aspects of place - location / lot location, access, axiality. (E. C. MAHFUZ, 2002; J. C. MIGUEL, 2000; E. C. CHEREGATI, 2007; M. COTRIM, 2007). (Cap. 3). The documentation and description resulting allowed us to approach some related questions about the canonical transcripts hybridizing, adoptions and any vernacular innovations of modern houses along the coast, We conclude that the appellants and anachronistic elements isolates found in each of the studied bind to the Brazilian Modern Architecture

Desempenho térmico de coberturas: Um estudo comparativo entre as telhas de material reciclado, de fibra e betume, fibrocimento e cerâmica

This study aims to compare the thermal performance of tiles made from recycled material (waste packaging cardboard with aluminized film) with the tiles of fiber and bitumen, fiber cement and red ceramic with the aim of verifying the suitability of tile to be used in hot and humid climate of low latitude. The samples were selected according to the availability from Natal - RN market, as they are sold to the consumers. The methodology was based on studies that used experimental apparatus composed of thermal chambers heated by banks of incandescent bulbs, to analyze the thermal performance of materials. The tiles in the study were submitted to analysis of thermal performance, thermophysical properties and absorptance, using chambers of thermal performance, measuring the thermophysical properties and portable spectrometer, respectively. Comparative analysis of thermal performance between two samples of the recycled material with dimple sizes and different amounts of aluminum were made, in order to verify, if these characteristics had some interference on the thermal performance of them; the results showed no significant performance differences between the samples. The data obtained in chambers of thermal performance and confirmed by statistical analysis, showed, that the tile of recycled material have similar thermal performance to the tile of fiber cement. In addition to these tests was carried out the automatic monitoring of a building covered with tiles of recycled material, to verify its thermal performance in a real situation. The results showed that recycled shingles must be used with technical criteria similar to those used for fiber cement tiles, with regard to the heat gain into the building. Within these criteria should be taken into account local characteristics, especially in regions with hot and humid climate, and its use must be associated, according to the literature, to elements of thermal insulation and use of passive techniques such as vented attics, ceilings and right foot higher

UBS RN-7: proposta arquitetônica para um padrão flexível de unidade básica de saúde para a zona bioclimática 7 do RN, com ênfase na sustentabilidade ambiental

Standardization and sustainability: these two apparently antagonistic words find the challenge of uniting in a flexible architectonic proposal. This was the idea that motivated the proposal of this assignment, whose appearing is bound up with the necessity of thinking about standardized spaces that attend on functional criterias and environmental sustainability, in reply to an existing real demand. The assignment consists of an architectonic proposal for a flexible standard of a Basic Unit of Health for the bioclimatic zone 7 of RN (UBS RN-7), with emphasis in the environmental sustainability. The project contemplates innumerable involved variables, such as: obedience to the current law of the Health Ministry for the UBSs; formal/aesthetic aspects; criterias of expansiveness of the UBS I for the UBS II; relative aspects to the constructive rationality and, mainly, sustainability aspects. With the intention to unite the variables and, also, glimpsing a proposal that could reach a good functional performance, aesthetic, of environment comfort and energetic efficiency, it was also necessary to consider concepts about the flexibility of the envelopment. The elaboration of the architecture first draft was based on bibliographical research, conceptual studies and references, elaboration of the architectonic program and the draft development for the UBS port I and the UBS port II. To the end, an implantation data sheet for the project is proposed for the UBS standard project, where strategies of thermal isolation, shadowing and thermal inertia are adopted and combined to three possible types of lot, resulting in 24 possibilities of implantation

Entre o cartão-postal e a cidade real: um estudo sobre paisagem e produção imobiliária em Natal/RN

Recent studies concerning the landscape have investigated the most important activities that contribute for its modification and have tried to better understand the society through the marks left by its quotidian. It is understood that singular landscapes constitute the cultural patrimonies of the cities, once they are part of the daily life of the citizens and are present in their social representations. Some contemporary authors defend the preservation of the natural and urban landscape trying, specially, to keep its importance for the local population. Natal is a city where the ambient qualities are well defined and known by the beauty of the area where it is located. Situated just between a river and the sea, the city grew following its geographic characteristics. The Potengi River, the Atlantic Ocean and the vast dunes ecosystem represented natural limits to the urban expansion; at the same time they have favored the development of a landscape pattern marked by the dialectic between the natural elements and the human interventions. However, this relationship changed after the intensification of the high rising development process that took place since the 1960s. The urban legislation tried to preserve the features of the local landscape delimiting Areas for Controlling Building High , destined to protect the scenic value of some parts of the city. On the other hand, the civil construction sector has made constant pressure in sense to abolish or to modify this legal instrument, aiming profits that have increased, in the 1990s, because of the consumption and the qualification of the urban space for tourist activities. It is necessary the raising of new elements to stimulate the quarrel about the landscape preservation, the process of the urban space production and the best way for the legislation implementation. This work tries to raise elements about the subject at local level, in sense to use Natal City experience to contribute for the formulation of indicators to raise the question about the lack of measure for subjective values, for example the cultural and affective value of the landscape. The natural elements inserted in the urban profile, represent strong visual references and supply identity to the town; they are part of the collective imaginary and are detached in the social context of the city. Then, why the preservation of the landscape, that estimates the improvement in the quality of life, is not enough to justify the controlling building high already previewed as part of Natal City Legislation? These questions send us to the approach of the landscape, as a community patrimony, alerting that some of its significant esthetics attributes must be preserved as a legacy for the future generations

Estudo comparativo de pás para aerogeradores de grande porte fabricadas em materiais compósitos reforçadas com fibra de carbono ou fibra de vidro

The research and development of wind turbine blades are essential to keep pace with worldwide growth in the renewable energy sector. Although currently blades are typically produced using glass fiber reinforced composite materials, the tendency for larger size blades, particularly for offshore applications, has increased the interest on carbon fiber reinforced composites because of the potential for increased stiffness and weight reduction. In this study a model of blade designed for large generators (5 MW) was studied on a small scale. A numerical simulation was performed to determine the aerodynamic loading using a Computational Fluid Dynamics (CFD) software. Two blades were then designed and manufactured using epoxy matrix composites: one reinforced with glass fibers and the other with carbon fibers. For the structural calculations, maximum stress failure criterion was adopted. The blades were manufactured by Vacuum Assisted Resin Transfer Molding (VARTM), typical for this type of component. A weight comparison of the two blades was performed and the weight of the carbon fiber blade was approximately 45% of the weight of the fiberglass reinforced blade. Static bending tests were carried out on the blades for various percentages of the design load and deflections measurements were compared with the values obtained from finite element simulations. A good agreement was observed between the measured and calculated deflections. In summary, the results of this study confirm that the low density combined with high mechanical properties of carbon fibers are particularly attractive for the production of large size wind turbine blades

Estudo da viabilidade do processo de reciclagem do material descartado do sistema Zirkonzanh® de produção de próteses dentárias

At present, the material of choice for performing aesthetic dental prosthetic work is in the ceramic. Among them, the ceramic base of stabilized zirconia with 3% yttria (3Y - TZP) stand out for having excellent physical and mechanical properties. During the machining of blocks of zirconia in the laboratory to prepare the various types of prostheses, much of the material is given off in the form of powder, which is subsequently discarded. The waste of this material results in financial loss, reflecting higher final cost treatment for patients, as well as damage to the environment, thanks to the processes involved in the manufacture and disposal of the ceramic. This research, pioneered the recycling of zirconium oxide powder obtained during milling of dental crowns and bridges, we highlight the social and environmental aspects and aims to establish a protocol for the reuse of waste (powder of zirconia Zirkonzahn® system) discarded to obtain a new block of compacted zirconia to maintain the same mechanical and microstructural properties of commercial high-cost imported material. To compare with the commercial material, samples were uniaxially (20 MPa) and isostatically (100 MPa), and its mechanical and microstructural characterization was performed through tests of density, porosity, dilatometry, X-ray diffraction (XRD), hardness, fracture toughness, resistance to fracture electron microscopy (SEM) and analysis of grain size. The results observed in the samples were isostatically pressed similiares those obtained with samples from the commercial material demonstrating the viability of the process

A Poética do corpo no mito e na dança butô: por uma educação sensível

The thesis presents the body poetry and its inscribing in the myth and Butô dance. The argumentation highlights the sensitive dimension present in these itineraries, as a possibility to operate the emergency of knowing inscribed in the body, bringing a kind of rationality that links the fragments, that allows the knowing to break through the barriers of disciplinary isolation, that abandons the certainties and goes through the ways of creation and that gives the body new space and time, featuring epistemological elements, ethical and esthetical, that can permit a sensitive education. All along the way, we comprehend by sensitive education, a education that considers the relinking of logical, analogical, symbolic and artistic knowledge and therefore reconsiders the own act of knowing as a continuous and inconcluded process. That sensitive education is also understood as retaking the body experience, its sensitive nature, as well as being meaningful to reading the world. It includes the body memory, its history and creativity, opening it to innovation, change, sense amplification and dialogue with other bodies and world, because it is within them. It is about an investigation of phenomenologic nature, that dialogues philosophy and art, pointing breakdowns of this reflection foe the body and education studies. We find it necessary to notice the body language, that allows one to think through movements, articulate a thought that is risen from articulations, guts and all the body. This incarnated reason starts the expressive body action, that makes us move to mean, communicate, inaugurate senses. Among these senses, we present a possibility of approach of the elements of Butô dance teaching and physical education, as ways of sensitive education showings of body poetry

O dia mais feliz da minha vida: a entrada na universidade segundo os alunos recém-ingressos no curso de Pedagogia da UFRN(2004.1)

The present work, based on the methodological principles of the Comprehensive Discourse Analysis, aimed, through the speech of twelve newly arrived students at the Pedagogy course of the Federal University of Rio Grande do Norte, to understand the moment students start university. It also aimed to analyze the relationship between the schools they were coming from and university entrance as well as the relationship between university and their new students. In the first part of the work, which focused on school knowledge, a comprehensive listening of the speeches of the students led primarily to a distinction, established by the students, between public and private schools, a distinction especially based on the view of superiority of private schools against public ones. The abovementioned interpretation is found in the discussion of the structural duality of Brazilian education which, historically, offers different pedagogical appliances among students of more priviledged social classes and those who come from lower levels of society. The overcome of this duality, aspired by the Brazilian Constitution of 1988, was stopped by the advent of a new economic model neoliberalism, which reinforced the differences between public and private when it prioritized the market on the economic, political and social relations, including educational projects. Impoverishment of public institutions and pauperization of the work of professors affected also the relationship between teachers and studens at the current institution. This is how the teacher becomes the greatest villain at the public management system. All of these references concerning differences in the quality of teaching at public and private schools, expressed by the students interviewed, however, were centered in the preparation for the entrance exam, called vestibular, thus showing a view that the relationship between the student and the school he came from is of a propedeutic kind and even so, reduced to a preparation for an entrance exam. In the second part of the work, which analyzed the relationship between newly arrived students and their university, it was noticed that the latter represents a whole new world. This world is seen as the change at the student´s social statute for now he is grown, takes more responsibilities and is socially respected. This change of attitude established by society and the discovery of a new world which requires more independence from the students, creates in them feelings of pride and fear and they feel insecure when it comes to making decision in the campus because now their decisions deliver a greater load of responsibility. This is when students understand they need to develop autonomy, which is seen, in this work, as the capacity to make conscious decisions. Nevertheless students expressed an understanding of autonomy as something that comes as a gift for those who enter university and not as a process that is constructed from social experiences. For these students, the need to be autonomous refers to the relationships with their teachers and the search for information. This search, however, is also related, according to interviews, to public school financial cuts, which penalize university, and to the lack of employers

Somos todos canibais: antropofagia, corpo e educação sensível

Cette étude présente l anthropophagie comme une notion théorique et experiementale du corps qui réhabilite le sensible et réveille le monde perçu. L argumentation fait ressortir la dimension sensible du corps et de la connaissance, en considerant sa sensibilité et motricité, corps qui ne se sépare pas de la nature et de l histoire, en actuant dans le monde comme présence vive, originaire, en mouvement ; en supposant un sujet qui, au même temps que construit ses propres senses, il dépend de l expérience de l autre et du monde, en créant et en recréant la culture, et il agrandit le processus de connaître, de sentir, de penser, d agir, d être, de se transformer. Cette attitude annonce une connaissance sensible et un corps qui est suscetible de sensations, mais d expréssions aussi, de communication, de création, aspects indispensables pour se pensar l éducation comme un space sensible, d apprantissage et réssignification de la culture ; que dévient possible la communion avec le corps, le temps, le space ; qu enseigne à réapprendre à voir le monde, que considère la réversibilité des senses et l esthésie comme champs de l expérience sensible et de l imputation des senses ; qu évoque la beauté des multiples léctures du vécu et qu agrandit la compréhension du soi et de l autre. L objectif de ce travail est comprendre l anthropophagie comme une attitude du corps et de la connaisance sensible, qu approfondit la rélation de l être au monde, la rélation avec l autre et permet la création de senses culturelles, ésthetiques et éxistentielles our l éducation. Nos présentons l attitude phénomologique de Maurice Merleau-Ponty comme référence théorique et méthodologique de notre recherche. Il s agit d une attitude de la pensée qui place la conaissance au centre de nos expériences vécues au monde ; une attitude qui ne propose pas un sens définitif des choses et des personnes et qui contribue pour la compréhension de l anthropophagie, du corps, du sensible, du monde et de l autre, en indiquant des développements de ces réflexions pour l éducation. En créant des horizonts de sense et strastégies de pérception sur l anthopophagie, nos considérons comme choix notre expérience vécu, comme les voyages; atelier d extension avec des élèves du cours de Technologie en Production Culturelle de l Institut Fédéral d Éducation, Science et Technologie du Rio Grande do Norte-IFRN, Campus Cidade Alta ; l anthropophagie comme élement de l Art Moderne Brésilien ; les créations et les récits des élèves ; images ; filmes et livres recherchés ; dialogues avec les penseurs Lévi-Strauss, Montaigne et Oswald de Andrade, qui constituent nos principales références conceptuelles et qui ont permis traversé des savoirs et promouvoir un dialogue entre divers champs de connaissance, comme l Anthropologie, la Philosophie, l Art et l Éducation. Ces stratégies constituent le resultat partiel et inachevé d un processus de connaisance de soi et de l autre, que permet de revivre des mémoires, faire ressortir des couleurs, des senses, des goûts, des découvertes sensibles et encourageantes sur la connaissance, sur l art, des découvertes sur soi même, sur l autre, sur le monde, sur la vie, indiquant que l éducation peut être un processus fort sensible, dans lequel le corps est une présence indispensable, aussi comme le toucher, le créer, les delires, les affections, les encontres et l invention