Avaliação de pastagens tropicais em sistemas de produção de ovinos de corte no nordeste brasileiro

He aim of this study was to evaluate the structural characters, herbage accumulation, nutritive value and performance of sheep in different tropical pastures. The treatments were two cultivars and two of the genera Panicum Brachiaria pastures under intermittent stocking and variable stocking rate, in the rainy season. We evaluated the masses and the components of herbage pre grazing in two layers, and after grazing. Chemical analyzes were made of the stems and leaf blades pre grazing in two layers. We used 48 male sheep and whole for the assessment of individual weight gain and area, and anestrous females to adjust the stocking rate. In the cv. Massai showed the highest herbage mass, leaf blades and dead material, and the largest volume density and leaf blade: stem pre grazing. There was no difference among cultivars for the percentage of leaf blade (PLB) in both strata, but the higher the PLB was higher than the bottom. The highest percentage of dead material (PDM) was observed in cvs. Massai and Marandu in the two strata. In cvs. Massai and Piatã were observed lower levels of crude protein in stem and leaf. In stratum 0-25 cm lower nutritional value was observed in the stem in the leaf blades did not grant the nutritional value among the strata. Herbage mass, leaf blade, PLB and proportion of stem in the residue of the Massai pastures were higher than cv. Aruana. There was no difference for efficiencies in harvest leaf and stem between the cultivars. The cv. Massai got the higher accumulation of leaf per cycle per day. Animals kept in grass swards Aruana had the highest average daily gain. The higher stocking rates and earnings per area were observed in grass swards and Marandu Massai. The cultivars are suitable for sheep meat production in the rainy season

Caracterização dos sistemas de produção de leite bovino na microrregião Seridó do estado do Rio Grande do Norte

The objective was to contribute to a reading of the characteristics and diversity of production systems from bovine milk in the microregion Seridó of Rio Grande do Norte, discuss the social, economic, environmental and husbandry-related primary activity of milk production. We randomly selected 28 agricultural establishments that performed the activity of dairy bovine culture with subsequent applicat ion of a structured questionnaire during September and October 2011. Data were analyzed with application of measures of descriptive analysis and determination of the index rural development (IRD). The results showed that 53.57% of the interviewees were owners of the land, the median area of the properties amounted to 135 hectares, the median number of animals in the herd was 51 head, with minimum 11 and maximum of 350 heads establishments in the sample, 85.72% of establishments had maximum 23 cows in lactation, 100% performed manual milking with suckling calves, average productivity of 3.91 liters / cow / day, 92.86% of the interviewees did not produce silage and / or hay, 64.29% had no access to technical assistance, the average age of interviewees was 51 ± 10.85 years, 78.57% had only elementary education. The average of the IRD computed in the test sample amounted to 0.43 ± 0.11 on a scale 0-1. The sites were grouped into 04 classes, based on your IRD. The average IRD in each dimension was 0.43, 0.55 and 0.34, respectively for economic / husbandry, social and environmental. The determination of the rate of rural development - IDR found for the sample could add establishments hierarchically. It is necessary that the inclusion of best practices in herd management, bookkeeping zootechnical, technical assistance and reorganization practices in land and environmental preservation

Caracterização da caprinocultura nas microrregiões da chapada do Apodi e de Angicos do Estado do Rio Grande do Norte

The objectives of this study were to characterize the goat production systems and to identify the factors limiting the production chain and develop solutions to improve the goat industry in the Rio Grande do Norte State, Brazil. One hundred and sixty two questionnaires were applied to goat farmers looking for productive, economic and social information about the utilized systems in the micro regions of Chapada do Apodi and Angicos. The majority producers interviewed were male, aging from 31 to 50 years old, attended elementary school, associated to farm organizations and living with his family on farm. Their main concerns are feeding the heard and animal theft. Their average farmlands areas range from 11 to 50 hectares. Goat meat is the main production in Chapada do Apodi whereas milk is produced by farmers in Angicos micro region. The majority of goat production works with an extensive system, with low technological inputs. It was detected that the meat and milk production as the marketing of goat products is not well conducted. Other point to be improved is to increase the meat and dairy goat products to be available for consumers. Goat systems for meat and milk production has great to potential for this micro regions, although public policies for an organized supply chain is needed

Caracterização e modelagem dos sistemas de produção de caprinos leiteiros

The objectives of this research were characterizing the dairy goat production systems and model it using linear program. On the first step of this research, the model was developed using data from farms that was affiliated in the ACCOMIG/Caprileite, used a similar dairy goat production systems and have a partnership program with Universidade Federal de Minas Gerais . The data of research were from a structured questionnaire applied with farmers and monitoring of production systems during a guided visit on their farms. The results permitted identify that all farms were classified as a small and have a intensive production system. The average herd size had 63.75 dairy goats on lactation; it permits a production of 153, 38 kg of goat milk per day. It was observed that existing more than one channel of commercialization for the goat milk and their derivative products. The data obtained, on the first step of this research, was used to develop a linear program model. It was evaluated in two goat production systems, called P1 and P2. The results showed that the P1 system, with an annual birth and lactation during approximately 300 days was the best alternative for business. These results were compared with a mixed (beef and dairy) goat system in the semiarid region, which indicated merged with both systems. Therefore, to achieve profits and sustainability of the system, in all simulations it was necessary a minimum limit of funding of U.S. $ 10,000.00; this value permit earning of U.S. $ 792.00 per month and pay the investment within 5 years

Simulador de escoamento multifásico em poços de petróleo (SEMPP)

The multiphase flow occurrence in the oil and gas industry is common throughout fluid path, production, transportation and refining. The multiphase flow is defined as flow simultaneously composed of two or more phases with different properties and immiscible. An important computational tool for the design, planning and optimization production systems is multiphase flow simulation in pipelines and porous media, usually made by multiphase flow commercial simulators. The main purpose of the multiphase flow simulators is predicting pressure and temperature at any point at the production system. This work proposes the development of a multiphase flow simulator able to predict the dynamic pressure and temperature gradient in vertical, directional and horizontal wells. The prediction of pressure and temperature profiles was made by numerical integration using marching algorithm with empirical correlations and mechanistic model to predict pressure gradient. The development of this tool involved set of routines implemented through software programming Embarcadero C++ Builder® 2010 version, which allowed the creation of executable file compatible with Microsoft Windows® operating systems. The simulator validation was conduct by computational experiments and comparison the results with the PIPESIM®. In general, the developed simulator achieved excellent results compared with those obtained by PIPESIM and can be used as a tool to assist production systems development

A pegada de carbono como um dos indicadores de sustentabilidade para medição da responsabilidade socioambiental empresarial: um estudo de caso na unidade sede da Petrobras em Natal-RN

As a contemporary tendency, it is been evidenced that the environmental changes theme, already admitted as a concernment to international economical and political reality, is also gaining repercussion on industrial and business sector. Firms are implementing actions on trial to minimize their own greenhouse gases (GHG) emissions impacts. However, the great majority of those actions of Corporative Social-Environmental Responsibility (CSR) are referred only to direct emissions of the main production systems. Direct emissions are those derived of an isolate process, without considering the upstream and downstream processes emissions, which respond for the majority of emissions originated because of respective firm‟s production system existence. Because the greenhouse effect occurs globally and the GHG emissions contribute to the environmental changes independently of their origin, it must be taken into account the whole productive life cycle of products and systems, since the energy invested on resources extraction and necessary materials to the final disposal. To do so, it must be investigated all relevant steps of a product/production system life cycle, tracking all activities which emit greenhouse gases, directly or indirectly. This amount of emissions consists in the firm‟s Carbon Footprint. This research purpose is to defend the Carbon Footprint relevance and its adoption viability to be used as an Environmental Indicator on measurement/assessment of CSR. It has been realized a study case on Petrobras‟s seat unity at Natal-Brazil, assessing part of its Carbon Footprint. It has been used the software GEMIS 4.6 to do the emissions quantifying. The items measured were the direct emissions of the own unity vehicles and indirect emissions of offset paper (A4), energy and disposable plastic cups consumed. To 2009, these emissions were 3.811,94 tCO2eq. We may conclude that Carbon Footprint quantification is indispensable to the knowledge of real emissions caused by a productive process existence, must serving as basis to CSR decisions about the environmental changes reversion challenge

Uma avaliação comparativa de estratégias de arranjos físicos para estaleiros de construção de embarcações metálicas de pequeno porte

The present study aims to analyse, in different levels of demand, what is the best layout strategy to adopt for the small metallic shipbuilding. To achieve this purpose, three simulation models are developed for analyze these production strategies under the positional, cellular and linear layouts. By the use of a simulation tool for compare the scenarios, Chwif and Medina (2010) and Law (2009)´s methodologies were adapted that includes three phases: conception, implementation and analysis. In conception real systems were represented by process mapping according to time, material resources and human resources variables required for each step of the production process. All of this information has been transformed in the cost variable. Data were collected from three different production systems, two located in Natal RN with cellular and positional layouts and one located in Belém-PA with linear layout. In the implementation phase, the conceptual models were converted in computacional models through the tool Rockwell Software Arena ® 13.5 and then validated. In the analysis stage the production of 960 ships in a year vessels were simulated for each layout noting that, for a production of until 80 units positional layout is the most recommended, between 81 and 288 units the cellular layout and more than 289 units the linear layout

Produção de ovinos em pastagem de capim-massai suplementados na estação seca

The low quality of tropical pastures in the dry season justifies the use of dietary supplements to meet the nutritional needs of sheep to meat production. Therefore, the objective of this experiment was to evaluate the agronomic characteristics of massaigrass in the dry season and the effect of protein supplements in the performance and productivity of sheep to meat production grazing. The protein supplements evaluated were: soybean meal, Leucena hay, Gliricidia hay and multiple mixture. The animals were managed in massaigrass pastures under rotational stocking and supplemented daily. Were used 24 sheep ½ Santa Inês x ½ SPRD (without defined breed), males uncastrated, mean age 90 days in a completely randomized design. Performance of sheep was evaluated for average daily gain of live weight gain per area and stocking rate (animals of 25 kg/ha). The pasture was evaluated for forage mass of pre and post-grazing, the percentages of participation of morphological constituents and their nutritional values and rates of herbage accumulation. The total herbage mass decreased throughout the dry season. Crude protein and in vitro digestibility of organic matter of the leaf were higher in the upper 15 cm of the canopy stratum. The average daily weight gain of the animals supplemented with legume hay was similar to that gained by animals supplemented with soybean meal in the four grazing cycles. The total live weight gain of animals supplemented with legume hay was higher than the animals supplemented only with multiple mixing the first two grazing cycles. Hays of Leucena and Gliricidia can be given for supplementation of sheep maintained on pasture

O efeito da autocorrelação no desempenho do gráfico T2 de hotelling: caso bivariado

The chart of control of Hotelling T2 has been the main statistical device used in monitoring multivariate processes. Currently the technological development of control systems and automation enabled a high rate of collection of information of the production systems in very short time intervals, causing a dependency between the results of observations. This phenomenon known as auto correlation causes in the statistical control of the multivariate processes a high rate of false alarms, prejudicing in the chart performance. This entails the violation of the assumption of independence and normality of the distribution. In this thesis we considered not only the correlation between two variables, but also the dependence between observations of the same variable, that is, auto correlation. It was studied by simulation, the bi variate case and the effect of auto correlation on the performance of the T2 chart of Hotelling.