118 resultados para Análise de redes (Planejamento)
em Universidade Federal do Rio Grande do Norte(UFRN)
Resumo:
O presente estudo discute a formação de Redes Sociais no cotidiano da Estratégia Saúde da Família, a partir de aportes da teoria sociológica sobre redes, interações, dádiva e reconhecimento. O objetivo geral é analisar as redes sociais locais em saúde a partir da interação de usuários e profissionais da Estratégia Saúde da Família na Unidade de Saúde de Ligéia, em Natal, RN. Seus objetivos específicos são: Mapear as redes sociais locais em saúde existentes no território adscrito; Identificar os tipos de interações cotidianas entre os sujeitos; Compreender a percepção dos sujeitos sobre o processo de formação de redes sociais a partir das interações. Caracteriza-se enquanto pesquisa qualitativa exploratória cujos sujeitos foram profissionais e usuários vinculados à referida unidade de saúde. Para a coleta de dados foram utilizadas entrevistas individuais semiestruturadas e debates em grupos focais, estimulados pela Metodologia de Análise de Redes do Cotidiano (MARES), pertinente para abordar a complexidade das relações sociais e mapear os diferentes conteúdos expressos e as formas de mobilização coletiva. A análise dos dados foi realizada através da Técnica de Análise Temática de Conteúdo, proposta por Minayo. Os resultados foram interpretados à luz das Teorias da Dádiva (Mauss) e do Reconhecimento (Honneth). Os sujeitos visualizaram: Rede Virtual (28,20%); Rede de Atenção à Saúde (25,64%); Redes de Usuários (17,95%); Rede Pessoal (10,26%); Conselho Comunitário (10,26%); Escolas (7,69%). Os participantes não perceberam os arranjos familiares enquanto Redes Sociais. Os tipos de interações sociais identificadas foram: Confrontação/Negociação (41.02%); Harmônicas (25,70%); Correlativas (17,90%); Definidas pela Organização (15,38%). A formação de redes sociais ocorre a partir de interações cotidianas entre pessoas, pela articulação inseparável de conteúdos e formas, catalisadas pelo contexto, experiência e cognição, valorizando a liberdade, a expressividade e a diversidade dos parceiros de significação. Foram encontradas duas categorias, na percepção dos sujeitos, sobre a formação de redes sociais do cotidiano: Diálogo e Encontro. Validamos e recomendamos o uso da metodologia MARES: Na formação, para despertar uma visão mais tolerante e humana de si e do outro; Na avaliação qualitativa dos serviços, por facilitar a reflexão sobre a prática e (re)organização do processo de trabalho; Na comunidade, para estimular movimentos sociais existentes ou emergentes. A aposta no circuito da dádiva e do reconhecimento recíproco, durante o trânsito nas redes sociais em saúde, pode ser capaz de tecer uma práxis transformadora, pela busca e alcance de confiança, respeito e estima, nos espaços de encontro entre usuários e profissionais da Estratégia Saúde da Família
Resumo:
This paper aim to check a hypothesis that assumes several behaviors related to social work norm´s obeying as a phenomenon that can be explained by actor´s social network structure and the rational choice processes related to the social norm inside that network, principally the payoff´s analysis received by the closest actors, or neighbors, at a social situation. Taking the sociological paradigm of rational action theory as a basis, the focus is on a debate about the logic of social norms, from Émile Durkheim´s method to Jon Elster´s theory, but also including social network analysis´s variables according to Robert Hanneman; and also Vilfredo Pareto´s constants related to human sociability, at the aim to detect elements that can help the scholars to develop an agent based model which could explain the sociological problem of deviance by a better way than the common sense´s view about morality and ethics at a social work environment
Resumo:
This paper presents an analysis of the current strategic plan of the Judiciary of Rio Grande do Norte emphasizing the evaluation of strategic indicators verifying the effectiveness in implementation, since the implementation of the Balanced Scorecard as a tool for performance evaluation of strategic management. The research presents the strategy map and the evaluation indices of strategic performance reporting on the effectiveness. After literature review and documentary, is making the measurement of indicators that are treated from the standpoint of an exploratory and descriptive in strategic planning used by the judiciary Potiguar. The problem was evaluated qualitatively and quantitatively using statistical techniques for data analysis comparing them between Judiciaries of Brazilian States. With respect to data collection was used performance indicators extracted from the data of Justice in Numbers provided by CNJ the period from 2004 to 2011, and the information sought in the Sector Strategic Planning TJ / RN. The main results of this study are as follows: Acquisition of insight into what level is the strategic planning of the judiciary of Rio Grande do Norte and the evolution of its performance indicators comparing them with the states of RS, CE, SE and the National Judiciary
Resumo:
The dissertation examines the influence of relationships among actors from Brazilian Tourism Political Network who compose the National Council of Tourism in the drafting of the National Tourism Plans (PNT) - PNTs 2003/2007 and 2007/2010, focusing on two main types of interaction: cooperation and information exchange. Therefore, the study departed from the understanding that the concept of tourism as a human phenomenon is configured as an essential conceptual basis for the development, implementation and analysis of public policies. The application of Network Theory and Social Network Analysis serves as an analytical tool, in addition, the use of concepts of Policy Networks enabled to interpret, in distinct aspects, the social reality of tourism in a more precise and detailed way. The study had a cross-sectional with a longitudinal perspective and case study was adopted, thus enabling to apply the model of social network analysis and qualitative approach. Through the survey conducted, it was found that the drafting process of National Tourism Plans was the result of the interaction of a complex network of actors from public and private initiatives, who compose the National Council of Tourism, and that their power of influence came out simultaneously, but not symmetrically, for both their performance/intervention in the meetings, and the possession of economic and organizational resources. Hence, the establishment of partnerships and information exchanges among the actors were underlying to the PNT drafting process, both in problems perception and insertion in the government agenda, as in making proposals to solve them, thus guiding the construction of large programs and programs contained in both investigated plans.
Resumo:
In this work a study of social networks based on analysis of family names is presented. A basic approach to the mathematical formalism of graphs is developed and then main theoretical models for complex networks are presented aiming to support the analysis of surnames networks models. These, in turn, are worked so as to be drawn leading quantities, such as aggregation coefficient, minimum average path length and connectivity distribution. Based on these quantities, it can be stated that surnames networks are an example of complex network, showing important features such as preferential attachment and small-world character
Resumo:
Advanced Oxidation Processes (AOP) are techniques involving the formation of hydroxyl radical (HO•) with high organic matter oxidation rate. These processes application in industry have been increasing due to their capacity of degrading recalcitrant substances that cannot be completely removed by traditional processes of effluent treatment. In the present work, phenol degrading by photo-Fenton process based on addition of H2O2, Fe2+ and luminous radiation was studied. An experimental design was developed to analyze the effect of phenol, H2O2 and Fe2+ concentration on the fraction of total organic carbon (TOC) degraded. The experiments were performed in a batch photochemical parabolic reactor with 1.5 L of capacity. Samples of the reactional medium were collected at different reaction times and analyzed in a TOC measurement instrument from Shimadzu (TOC-VWP). The results showed a negative effect of phenol concentration and a positive effect of the two other variables in the TOC degraded fraction. A statistical analysis of the experimental design showed that the hydrogen peroxide concentration was the most influent variable in the TOC degraded fraction at 45 minutes and generated a model with R² = 0.82, which predicted the experimental data with low precision. The Visual Basic for Application (VBA) tool was used to generate a neural networks model and a photochemical database. The aforementioned model presented R² = 0.96 and precisely predicted the response data used for testing. The results found indicate the possible application of the developed tool for industry, mainly for its simplicity, low cost and easy access to the program.
Resumo:
Advanced Oxidation Processes (AOP) are techniques involving the formation of hydroxyl radical (HO•) with high organic matter oxidation rate. These processes application in industry have been increasing due to their capacity of degrading recalcitrant substances that cannot be completely removed by traditional processes of effluent treatment. In the present work, phenol degrading by photo-Fenton process based on addition of H2O2, Fe2+ and luminous radiation was studied. An experimental design was developed to analyze the effect of phenol, H2O2 and Fe2+ concentration on the fraction of total organic carbon (TOC) degraded. The experiments were performed in a batch photochemical parabolic reactor with 1.5 L of capacity. Samples of the reactional medium were collected at different reaction times and analyzed in a TOC measurement instrument from Shimadzu (TOC-VWP). The results showed a negative effect of phenol concentration and a positive effect of the two other variables in the TOC degraded fraction. A statistical analysis of the experimental design showed that the hydrogen peroxide concentration was the most influent variable in the TOC degraded fraction at 45 minutes and generated a model with R² = 0.82, which predicted the experimental data with low precision. The Visual Basic for Application (VBA) tool was used to generate a neural networks model and a photochemical database. The aforementioned model presented R² = 0.96 and precisely predicted the response data used for testing. The results found indicate the possible application of the developed tool for industry, mainly for its simplicity, low cost and easy access to the program.
Resumo:
This research assumes that for changes in health practices directed to an integral care, is crucial humanization, participation and autonomy of service users. In this sense, the research had investigated the issue of humanization involving users of the Family Health Strategy (FHS) in city of Mossoró, having as objectives: to analyze the perceptions of users on humanization in the production of health care in daily of Family Health Strategy, from these perceptions, identify elements featuring humanized and non-humanized in everyday practices related to production of health care; relate perceptions of users about humanization with the notions of extended clinic and social participation present in the National Humanization Policy (NHP); identify difficulties and potentialities in the production of health care from the perspective of humanization. It was a qualitative approach to data collection and it was used the methodology of Network Analysis of Everyday Life (NAEL), which allowed the questioning of health practices through an interactive discussion involving participants subjected. The analysis of data through the technique of content thematic analysis was performed and the results were interpreted related the Extended Clinic references and the users participation, related with the Gift Theory discussed by Marcel Mauss. The results indicated senses humanization linked to affection, reciprocity and honesty, highlighting as essential to humanized practices the trust, bonding, listening, dialogue and accountability. Were also mentioned other elements related to the organization of health services such as access and good functioning of the health services. The difficulties and potentialities show structural deficiencies of the health system and changes in the labor process. The participation of users deconstructing and reconstructing concepts remainder humanization in the production of health care is a key factor for the sedimentation of what is proposed in the HNP. Using the privileged space of the FHE to create more active people and understanding their needs and demands, is possible path to build a participative management
Resumo:
The usual programs for load flow calculation were in general developped aiming the simulation of electric energy transmission, subtransmission and distribution systems. However, the mathematical methods and algorithms used by the formulations were based, in majority, just on the characteristics of the transmittion systems, which were the main concern focus of engineers and researchers. Though, the physical characteristics of these systems are quite different from the distribution ones. In the transmission systems, the voltage levels are high and the lines are generally very long. These aspects contribute the capacitive and inductive effects that appear in the system to have a considerable influence in the values of the interest quantities, reason why they should be taken into consideration. Still in the transmission systems, the loads have a macro nature, as for example, cities, neiborhoods, or big industries. These loads are, generally, practically balanced, what reduces the necessity of utilization of three-phase methodology for the load flow calculation. Distribution systems, on the other hand, present different characteristics: the voltage levels are small in comparison to the transmission ones. This almost annul the capacitive effects of the lines. The loads are, in this case, transformers, in whose secondaries are connected small consumers, in a sort of times, mono-phase ones, so that the probability of finding an unbalanced circuit is high. This way, the utilization of three-phase methodologies assumes an important dimension. Besides, equipments like voltage regulators, that use simultaneously the concepts of phase and line voltage in their functioning, need a three-phase methodology, in order to allow the simulation of their real behavior. For the exposed reasons, initially was developped, in the scope of this work, a method for three-phase load flow calculation in order to simulate the steady-state behaviour of distribution systems. Aiming to achieve this goal, the Power Summation Algorithm was used, as a base for developping the three phase method. This algorithm was already widely tested and approved by researchers and engineers in the simulation of radial electric energy distribution systems, mainly for single-phase representation. By our formulation, lines are modeled in three-phase circuits, considering the magnetic coupling between the phases; but the earth effect is considered through the Carson reduction. Its important to point out that, in spite of the loads being normally connected to the transformers secondaries, was considered the hypothesis of existence of star or delta loads connected to the primary circuit. To perform the simulation of voltage regulators, a new model was utilized, allowing the simulation of various types of configurations, according to their real functioning. Finally, was considered the possibility of representation of switches with current measuring in various points of the feeder. The loads are adjusted during the iteractive process, in order to match the current in each switch, converging to the measured value specified by the input data. In a second stage of the work, sensibility parameters were derived taking as base the described load flow, with the objective of suporting further optimization processes. This parameters are found by calculating of the partial derivatives of a variable in respect to another, in general, voltages, losses and reactive powers. After describing the calculation of the sensibility parameters, the Gradient Method was presented, using these parameters to optimize an objective function, that will be defined for each type of study. The first one refers to the reduction of technical losses in a medium voltage feeder, through the installation of capacitor banks; the second one refers to the problem of correction of voltage profile, through the instalation of capacitor banks or voltage regulators. In case of the losses reduction will be considered, as objective function, the sum of the losses in all the parts of the system. To the correction of the voltage profile, the objective function will be the sum of the square voltage deviations in each node, in respect to the rated voltage. In the end of the work, results of application of the described methods in some feeders are presented, aiming to give insight about their performance and acuity
Resumo:
Com a incorporação de conceitos da automação em ambientes hospitalares surge uma série de novos requisitos pertinentes a área médica. Dentre esses requisitos, um que merece destaque é a necessidade do estabelecimento de uma rede de comunicação segura e eficiente entre os elementos do ambiente hospitalar, visto que, os mesmos encontram-se de maneira distribuída. Nesse sentido, existe uma série de protocolos que podem ser utilizados no estabelecimento dessa rede, dentre os quais, um que merece destaque é o PM-AH (Protocolo Multiciclos para Automação Hospitalar) justamente por ser voltado a automatização de ambientes hospitalares tanto no que diz respeito ao cumprimento dos requisitos impostos nesse tipo de ambiente, como pelo fato de ser projetado para funcionar sobre a tecnologia Ethernet, padrão esse que é comumente utilizado pela rede de dados dos hospitais. Em decorrência disso, o presente trabalho aborda uma análise de desempenho comparativa entre redes PM-AH e puramente Ethernet visando atestar a eficiência do primeiro no que diz respeito ao cumprimento dos requisitos impostos pela automação hospitalar
Resumo:
Forecast is the basis for making strategic, tactical and operational business decisions. In financial economics, several techniques have been used to predict the behavior of assets over the past decades.Thus, there are several methods to assist in the task of time series forecasting, however, conventional modeling techniques such as statistical models and those based on theoretical mathematical models have produced unsatisfactory predictions, increasing the number of studies in more advanced methods of prediction. Among these, the Artificial Neural Networks (ANN) are a relatively new and promising method for predicting business that shows a technique that has caused much interest in the financial environment and has been used successfully in a wide variety of financial modeling systems applications, in many cases proving its superiority over the statistical models ARIMA-GARCH. In this context, this study aimed to examine whether the ANNs are a more appropriate method for predicting the behavior of Indices in Capital Markets than the traditional methods of time series analysis. For this purpose we developed an quantitative study, from financial economic indices, and developed two models of RNA-type feedfoward supervised learning, whose structures consisted of 20 data in the input layer, 90 neurons in one hidden layer and one given as the output layer (Ibovespa). These models used backpropagation, an input activation function based on the tangent sigmoid and a linear output function. Since the aim of analyzing the adherence of the Method of Artificial Neural Networks to carry out predictions of the Ibovespa, we chose to perform this analysis by comparing results between this and Time Series Predictive Model GARCH, developing a GARCH model (1.1).Once applied both methods (ANN and GARCH) we conducted the results' analysis by comparing the results of the forecast with the historical data and by studying the forecast errors by the MSE, RMSE, MAE, Standard Deviation, the Theil's U and forecasting encompassing tests. It was found that the models developed by means of ANNs had lower MSE, RMSE and MAE than the GARCH (1,1) model and Theil U test indicated that the three models have smaller errors than those of a naïve forecast. Although the ANN based on returns have lower precision indicator values than those of ANN based on prices, the forecast encompassing test rejected the hypothesis that this model is better than that, indicating that the ANN models have a similar level of accuracy . It was concluded that for the data series studied the ANN models show a more appropriate Ibovespa forecasting than the traditional models of time series, represented by the GARCH model
Resumo:
In The paradoxical happiness , Gilles Lipovetsky elects five major paradigmatic models that command the pleasure and happiness in our societies. Starting with the paradigmatic models of penia (where it is emphasized the existential dissatisfaction supplied by the consumption and where advertising has a special place, bombarding consumers and creating consumer needs, in addition to selling a lifestyle rather than the products themselves), and narcissus (model constructed on the basis of self-exaltation and abdication of the social and political) intends to examine the relationship between the consumption exercised by young people and the advertising displayed on social networking sites, focusing on the social media Facebook, observing the virtual fan pages of the following brands: Coca-Cola; Pepsi; BlackBerry, Nokia, Riachuelo and C&A and their relationships with their consumers
Resumo:
The usual programs for load flow calculation were in general developped aiming the simulation of electric energy transmission, subtransmission and distribution systems. However, the mathematical methods and algorithms used by the formulations were based, in majority, just on the characteristics of the transmittion systems, which were the main concern focus of engineers and researchers. Though, the physical characteristics of these systems are quite different from the distribution ones. In the transmission systems, the voltage levels are high and the lines are generally very long. These aspects contribute the capacitive and inductive effects that appear in the system to have a considerable influence in the values of the interest quantities, reason why they should be taken into consideration. Still in the transmission systems, the loads have a macro nature, as for example, cities, neiborhoods, or big industries. These loads are, generally, practically balanced, what reduces the necessity of utilization of three-phase methodology for the load flow calculation. Distribution systems, on the other hand, present different characteristics: the voltage levels are small in comparison to the transmission ones. This almost annul the capacitive effects of the lines. The loads are, in this case, transformers, in whose secondaries are connected small consumers, in a sort of times, mono-phase ones, so that the probability of finding an unbalanced circuit is high. This way, the utilization of three-phase methodologies assumes an important dimension. Besides, equipments like voltage regulators, that use simultaneously the concepts of phase and line voltage in their functioning, need a three-phase methodology, in order to allow the simulation of their real behavior. For the exposed reasons, initially was developped, in the scope of this work, a method for three-phase load flow calculation in order to simulate the steady-state behaviour of distribution systems. Aiming to achieve this goal, the Power Summation Algorithm was used, as a base for developing the three phase method. This algorithm was already widely tested and approved by researchers and engineers in the simulation of radial electric energy distribution systems, mainly for single-phase representation. By our formulation, lines are modeled in three-phase circuits, considering the magnetic coupling between the phases; but the earth effect is considered through the Carson reduction. It s important to point out that, in spite of the loads being normally connected to the transformer s secondaries, was considered the hypothesis of existence of star or delta loads connected to the primary circuit. To perform the simulation of voltage regulators, a new model was utilized, allowing the simulation of various types of configurations, according to their real functioning. Finally, was considered the possibility of representation of switches with current measuring in various points of the feeder. The loads are adjusted during the iteractive process, in order to match the current in each switch, converging to the measured value specified by the input data. In a second stage of the work, sensibility parameters were derived taking as base the described load flow, with the objective of suporting further optimization processes. This parameters are found by calculating of the partial derivatives of a variable in respect to another, in general, voltages, losses and reactive powers. After describing the calculation of the sensibility parameters, the Gradient Method was presented, using these parameters to optimize an objective function, that will be defined for each type of study. The first one refers to the reduction of technical losses in a medium voltage feeder, through the installation of capacitor banks; the second one refers to the problem of correction of voltage profile, through the instalation of capacitor banks or voltage regulators. In case of the losses reduction will be considered, as objective function, the sum of the losses in all the parts of the system. To the correction of the voltage profile, the objective function will be the sum of the square voltage deviations in each node, in respect to the rated voltage. In the end of the work, results of application of the described methods in some feeders are presented, aiming to give insight about their performance and acuity
Resumo:
The bidimensional periodic structures called frequency selective surfaces have been well investigated because of their filtering properties. Similar to the filters that work at the traditional radiofrequency band, such structures can behave as band-stop or pass-band filters, depending on the elements of the array (patch or aperture, respectively) and can be used for a variety of applications, such as: radomes, dichroic reflectors, waveguide filters, artificial magnetic conductors, microwave absorbers etc. To provide high-performance filtering properties at microwave bands, electromagnetic engineers have investigated various types of periodic structures: reconfigurable frequency selective screens, multilayered selective filters, as well as periodic arrays printed on anisotropic dielectric substrates and composed by fractal elements. In general, there is no closed form solution directly from a given desired frequency response to a corresponding device; thus, the analysis of its scattering characteristics requires the application of rigorous full-wave techniques. Besides that, due to the computational complexity of using a full-wave simulator to evaluate the frequency selective surface scattering variables, many electromagnetic engineers still use trial-and-error process until to achieve a given design criterion. As this procedure is very laborious and human dependent, optimization techniques are required to design practical periodic structures with desired filter specifications. Some authors have been employed neural networks and natural optimization algorithms, such as the genetic algorithms and the particle swarm optimization for the frequency selective surface design and optimization. This work has as objective the accomplishment of a rigorous study about the electromagnetic behavior of the periodic structures, enabling the design of efficient devices applied to microwave band. For this, artificial neural networks are used together with natural optimization techniques, allowing the accurate and efficient investigation of various types of frequency selective surfaces, in a simple and fast manner, becoming a powerful tool for the design and optimization of such structures
Resumo:
This study presents a description of the development model of a representation of simplified grid applied in hybrid load flow for calculation of the voltage variations in a steady-state caused by the wind farm on power system. Also, it proposes an optimal load-flow able to control power factor on connection bar and to minimize the loss. The analysis process on system, led by the wind producer, it has as base given technician supplied by the grid. So, the propose model to the simplification of the grid that allows the necessity of some knowledge only about the data referring the internal network, that is, the part of the network that interests in the analysis. In this way, it is intended to supply forms for the auxiliary in the systematization of the relations between the sector agents. The model for simplified network proposed identifies the internal network, external network and the buses of boulders from a study of vulnerability of the network, attributing them floating liquid powers attributing slack models. It was opted to apply the presented model in Newton-Raphson and a hybrid load flow, composed by The Gauss-Seidel method Zbarra and Summation Power. Finally, presents the results obtained to a developed computational environment of SCILAB and FORTRAN, with their respective analysis and conclusion, comparing them with the ANAREDE