10 resultados para ”Learning by doing”
em Universidade Federal do Rio Grande do Norte(UFRN)
Resumo:
This piece of work has investigated the alternative conceptions shown by students of secondary school, concerned to the concepts of warmth and temperature, aiming the elaboration and application of a learning strategy as of the diagnose risen from the conceptions present in students. The learning strategy was built up by a sequence of activities that involve History of Science and experiments, put in a course that had as a base the proposal of the Group of Redevelopment of Physics Teaching (GREF). We have used as the conductor wire of our research the development of thermo dynamics since the development of the first thermo machines, passing by the Industrial Revolution and the evolution of concepts of warmth and temperature. The learning strategy was applied to a group of second grade of secondary school in a public school in Mossoró (RN). By doing these activities we tried to become the concepts, which are part of thermo dynamics, more meaningful to the students. We have estimated that the application of the strategy has represented some profits to the students of the group, concerning to learning of laws and concepts of thermo dynamics (specifically the concepts of warmth and temperature), as well as what it is referred to the overcoming of its initial conceptions
Resumo:
This present article describes a research on the development, under the approach of participatory design, a virtual teaching-learning of Histology in which students and teachers participated actively in all stages of development of the educational environment. We postulates that the development of virtual learning environment of Histology, through the Participatory Design approach, contributes to greater acceptance and use by students and that the adoption of virtual environment for teaching and learning by teachers is a determining factor of use by students
Resumo:
The environmental impacts, caused by the solid residues generation, are an often quoted concern nowadays. Some of these residues, which are originated from different human activities, can be fully reused, reducing the effects of the poor waste management on the environment. During the salt production process, the first formed crystals are discarded as industrial waste. This is mainly made of gypsum that is a calcium sulfate dihydrate (CaSO4.2H2O). The gypsum in question may go through a calcination process due to the plaster (CaSO4.0,5H2O) production and then the application on the cement industry. Considering the necessity of development and application for these industrial wastes, this paper aims to analyze the plaster, called Salgesso, from the gypsum that was generated during the salt production, and its use viability on the civil construction industry in order to create environmental and economical benefits. For characterization, the following experiments were performed: X-ray Fluorescence (XRF), X-ray Diffraction (XRD), thermal analysis (TG/DTG) and Scanning Electron Microscopy (SEM) with EDS. The following tests were also performed to obtain the mechanical characteristics: Thinness Modulus, Unit Mass, Setting Time and Compressive Resistance. Three commercial plasters used on civil construction were taken as references. All of these tests were performed according to the current standards. It was noticed that although there were some conflicting findings between the salt and commercial plasters in all of the studied properties, the Salgesso has its values within the standard limits. However, there is the possibility to improve them by doing a more effective calcination process. Three commercial plasters, used in construction, were used as reference material. All tests were performed according to standards in force. It was observed that although some tests present conflicting findings between the salt and gypsum plasters commercial properties in all of the studied Salgesso have values within the limits imposed by the standard, but can be improved simply by calcination process more effective
Resumo:
The inter-subjectivity is the answer in the search for the solution of complex problems, which concerns interfaces of knowledge, respecting their borders. This paradigm is essential in the author's work. So, the search on screen is based on this perspective, by using inter-subject groups of work conduced by professionals of Computer Science, Social Communication, Architecture and Urbanism, Pedagogy, Psicopegagogy, Nutritional Science, Endocrinology, Occupational Therapy and Nursing, it was also part of this group an 8 year old child, daughter of one of the professional who took part of the group. This thesis aims to present the course of investigation developed, analyzing the action of inter-subject Occupational Therapy and Nutrition on the promotion of learning nutritional concepts through educative-nutritional games in order to prevent child's obesity in an educative context. The research was analytic, interventionist and almost experimental. It took place in a public school in Fortaleza, Ceará, Brazil, between August and December 2004. It was selected a sample non-probabilistic, by convenience, of 200 children, born from 1994 to 1996. It was selected almost nonprobabilistically, by convenience, 200 children born between 1994 and 1996. To analyze the results it was used a triangulation, associated by quantitative and qualitative approaches. The basis collect happened through games specially manufactured to these research- video-games, board games, memory games, puzzles, scramble, searching words and iterative basics. There were semi-structured interviews, direct and structured observations and focus in-groups. It was noticed the efficiency of educativenutritional games in the learning process, which lead to a changing of attitude towards the eating choices. These games gave similar results in relation to the compared variations preferences, experience and attitudes, theses attitudes were observed through the game; and the categories to compare the possibility of learning by playing, the fantasy in the learning process, learning concepts of nutritional education and the need of help in the learning process (mediation). It was proved that educativenutritional games could be used to teach nutritional concepts, in an inter-subjective action of Occupational Therapy and Nutrition in schools. The simultaneous application of these games lead to the optimization of child s learning process. It should be emphasized the need of studies about the adaptation of tools used in a child s Nutritional Education, with the help of inter-subjective action. Because just one subject, in a fractionated way can give an answer to complex problems and help to a change of the reality with effectiveness and resolution
Resumo:
The study analyzes the changes occurring in the professional qualification of the Nursing Technician in the Natal School of Nursing. It provides a historical discussion of Brazilian professional education, of the pertinent legislation in this type of teaching, and the repercussions related to the institutionalization of the Educational Directives Law. It interprets the discourse of the graduates of the complementary course of nursing auxiliary to nursing technician, for the year 2002, using the collective subject analysis and individual interviews. These revealed changes in the areas of knowledge-learning, knowledge-doing, knowledge-being, and an awakening to other changes besides the challenges being confronted. In this sense, nursing as a participant in a society that is effervescent with process changes, interacts socially, politically and professionally in this context, able to experience advances and retrogrades, depending on its political competency
Resumo:
We propose a new paradigm for collective learning in multi-agent systems (MAS) as a solution to the problem in which several agents acting over the same environment must learn how to perform tasks, simultaneously, based on feedbacks given by each one of the other agents. We introduce the proposed paradigm in the form of a reinforcement learning algorithm, nominating it as reinforcement learning with influence values. While learning by rewards, each agent evaluates the relation between the current state and/or action executed at this state (actual believe) together with the reward obtained after all agents that are interacting perform their actions. The reward is a result of the interference of others. The agent considers the opinions of all its colleagues in order to attempt to change the values of its states and/or actions. The idea is that the system, as a whole, must reach an equilibrium, where all agents get satisfied with the obtained results. This means that the values of the state/actions pairs match the reward obtained by each agent. This dynamical way of setting the values for states and/or actions makes this new reinforcement learning paradigm the first to include, naturally, the fact that the presence of other agents in the environment turns it a dynamical model. As a direct result, we implicitly include the internal state, the actions and the rewards obtained by all the other agents in the internal state of each agent. This makes our proposal the first complete solution to the conceptual problem that rises when applying reinforcement learning in multi-agent systems, which is caused by the difference existent between the environment and agent models. With basis on the proposed model, we create the IVQ-learning algorithm that is exhaustive tested in repetitive games with two, three and four agents and in stochastic games that need cooperation and in games that need collaboration. This algorithm shows to be a good option for obtaining solutions that guarantee convergence to the Nash optimum equilibrium in cooperative problems. Experiments performed clear shows that the proposed paradigm is theoretical and experimentally superior to the traditional approaches. Yet, with the creation of this new paradigm the set of reinforcement learning applications in MAS grows up. That is, besides the possibility of applying the algorithm in traditional learning problems in MAS, as for example coordination of tasks in multi-robot systems, it is possible to apply reinforcement learning in problems that are essentially collaborative
Resumo:
Following the new tendency of interdisciplinarity of modern science, a new field called neuroengineering has come to light in the last decades. After 2000, scientific journals and conferences all around the world have been created on this theme. The present work comprises three different subareas related to neuroengineering and electrical engineering: neural stimulation; theoretical and computational neuroscience; and neuronal signal processing; as well as biomedical engineering. The research can be divided in three parts: (i) A new method of neuronal photostimulation was developed based on the use of caged compounds. Using the inhibitory neurotransmitter GABA caged by a ruthenium complex it was possible to block neuronal population activity using a laser pulse. The obtained results were evaluated by Wavelet analysis and tested by non-parametric statistics. (ii) A mathematical method was created to identify neuronal assemblies. Neuronal assemblies were proposed as the basis of learning by Donald Hebb remain the most accepted theory for neuronal representation of external stimuli. Using the Marcenko-Pastur law of eigenvalue distribution it was possible to detect neuronal assemblies and to compute their activity with high temporal resolution. The application of the method in real electrophysiological data revealed that neurons from the neocortex and hippocampus can be part of the same assembly, and that neurons can participate in multiple assemblies. (iii) A new method of automatic classification of heart beats was developed, which does not rely on a data base for training and is not specialized in specific pathologies. The method is based on Wavelet decomposition and normality measures of random variables. Throughout, the results presented in the three fields of knowledge represent qualification in neural and biomedical engineering
Resumo:
In multi-robot systems, both control architecture and work strategy represent a challenge for researchers. It is important to have a robust architecture that can be easily adapted to requirement changes. It is also important that work strategy allows robots to complete tasks efficiently, considering that robots interact directly in environments with humans. In this context, this work explores two approaches for robot soccer team coordination for cooperative tasks development. Both approaches are based on a combination of imitation learning and reinforcement learning. Thus, in the first approach was developed a control architecture, a fuzzy inference engine for recognizing situations in robot soccer games, a software for narration of robot soccer games based on the inference engine and the implementation of learning by imitation from observation and analysis of others robotic teams. Moreover, state abstraction was efficiently implemented in reinforcement learning applied to the robot soccer standard problem. Finally, reinforcement learning was implemented in a form where actions are explored only in some states (for example, states where an specialist robot system used them) differently to the traditional form, where actions have to be tested in all states. In the second approach reinforcement learning was implemented with function approximation, for which an algorithm called RBF-Sarsa($lambda$) was created. In both approaches batch reinforcement learning algorithms were implemented and imitation learning was used as a seed for reinforcement learning. Moreover, learning from robotic teams controlled by humans was explored. The proposal in this work had revealed efficient in the robot soccer standard problem and, when implemented in other robotics systems, they will allow that these robotics systems can efficiently and effectively develop assigned tasks. These approaches will give high adaptation capabilities to requirements and environment changes.
Resumo:
This thesis presented is to research the actor's work in the construction of physical actions, according to the methodology developed by Constantin Stanislavski in his analysis of dramatic action, called "method of physical action", applied to questions of scenic representation of the Brazilian marginal, according to the look "cruel" and realistic / naturalistic Plinio Marcos playwright. Based on the circumstances given by Pliniano universe, the intention is to contribute to the reflection on the actor's work on the scene with the marginal characters in "Razor in the Flesh", highlighting some important aspects, to assist in the construction of this fictional world. You want to create conditions for the formation of an actor that leverages the scene the contradictions and conflicts of this work. The research aims from the theoretical and practical study as a methodological hypothesis, producing critical reflection from the creative process of the agent with the realization of a scenic experiment focused on psychophysical technique of this Russian pedagogue. Thus, we intend to have a look at the method of physical actions focusing on his last great contribution to the work, especially the procedure of active analysis by doing a reading from "Razor in the Flesh" through this creative scenic exercise, extending the studies concerning the actor's art. This research is a general explanation about the trajectory of Stanislavski to his encounter with the physical action, while, highlights the inconsistencies of understanding of his work around the world. Stanislavski initially developed the "method" having as a backdrop, the realist aesthetic - a dialogue relationship between reality and the scene - through a style which creates a theatrical reality, and consequently, artistic, not literally naturalistic way through an integral mimicry. That is, the representation of work in realistic theater aesthetics should be developed in order to create a theatrical reality. Stanislavski believes that theater is convention, since the actor's work on himself should encourage this second nature, scenic.
Resumo:
The environmental impacts, caused by the solid residues generation, are an often quoted concern nowadays. Some of these residues, which are originated from different human activities, can be fully reused, reducing the effects of the poor waste management on the environment. During the salt production process, the first formed crystals are discarded as industrial waste. This is mainly made of gypsum that is a calcium sulfate dihydrate (CaSO4.2H2O). The gypsum in question may go through a calcination process due to the plaster (CaSO4.0,5H2O) production and then the application on the cement industry. Considering the necessity of development and application for these industrial wastes, this paper aims to analyze the plaster, called Salgesso, from the gypsum that was generated during the salt production, and its use viability on the civil construction industry in order to create environmental and economical benefits. For characterization, the following experiments were performed: X-ray Fluorescence (XRF), X-ray Diffraction (XRD), thermal analysis (TG/DTG) and Scanning Electron Microscopy (SEM) with EDS. The following tests were also performed to obtain the mechanical characteristics: Thinness Modulus, Unit Mass, Setting Time and Compressive Resistance. Three commercial plasters used on civil construction were taken as references. All of these tests were performed according to the current standards. It was noticed that although there were some conflicting findings between the salt and commercial plasters in all of the studied properties, the Salgesso has its values within the standard limits. However, there is the possibility to improve them by doing a more effective calcination process. Three commercial plasters, used in construction, were used as reference material. All tests were performed according to standards in force. It was observed that although some tests present conflicting findings between the salt and gypsum plasters commercial properties in all of the studied Salgesso have values within the limits imposed by the standard, but can be improved simply by calcination process more effective