Reconfiguração dinâmica de estratégias distribuídas em dispositivos foundation fieldbus para a otimização de processos na indústria do petróleo

The petrochemical industry has as objective obtain, from crude oil, some products with a higher commercial value and a bigger industrial utility for energy purposes. These industrial processes are complex, commonly operating with large production volume and in restricted operation conditions. The operation control in optimized and stable conditions is important to keep obtained products quality and the industrial plant safety. Currently, industrial network has been attained evidence when there is a need to make the process control in a distributed way. The Foundation Fieldbus protocol for industrial network, for its interoperability feature and its user interface organized in simple configuration blocks, has great notoriety among industrial automation network group. This present work puts together some benefits brought by industrial network technology to petrochemical industrial processes inherent complexity. For this, a dynamic reconfiguration system for intelligent strategies (artificial neural networks, for example) based on the protocol user application layer is proposed which might allow different applications use in a particular process, without operators intervention and with necessary guarantees for the proper plant functioning

Avaliação dos impactos ambientais gerados por uma industria cerâmica típica da Região do Seridó/RN

The present work deals with an evaluation of the environmental impacts arised from a typical ceramics industry located in the Seridó region of Rio Grande do Norte State. That region contains the largest State s producing basin of red ceramics. The district of Parelhas stands out as the largest producing nucleus. The studied company is located in the rural zone of Parelhas, it was selected as study object because it possesses a great part of the representative characteristics of the Region s ceramics park as a whole. Impacts produced at the implantation and operation phases of the Company had been evaluated, being this last phase subdivided in stages of the productive process. Among found adverse impacts, they are distinguished: losses in air quality, undesirable noises, microclimatic alterations, impoverishment of the ground, elimination of the vegetal covering, agricultural exodus, crisis in cattle agriculture and, superficial and underground water contamination, beyond risks ocupational diseases and industrial accidents. The Leopold s interactive matrix, that summarizes results of the work, was presented in form of 15 (fifteen) tables that display impacts classified in qualitative and quantitative way. Totally, 175 (one hundred and seventy-five) significant impacts produced by this Company had been identified, being 114 (one hundred and fourteen) negative, 38 (thirty-eight) positive and 23 (twenty-three) among mixed, indefinite and inert ones. In the work, before the evaluation of impacts properly said, it was constructed a diagnostic table of the ambient situation at a previous moment to implantation of the Company, elaborated on basis of inferences and historical researches. It was proposed still, mitigative steps for adverse impacts identified, as also elaborated a program to accompaniment and observing that the fulfilment of indicated mitigative steps guarantees. The final part of the work contemplates conclusions and suggestions that aim to influence positively the presented sight in terms of environmental management

Análise dos Processos de Flotação e Oxidação Avançada para o Tratamento de Efluente Modelo da Indústria do Petróleo

The generation of wastes in most industrial process is inevitable. In the petroleum industry, one of the greatest problems for the environment is the huge amount of produced water generated in the oil fields. This wastewater is a complex mixture and present great amounts. These effluents can be hazardous to the environmental without adequate treatment. This research is focused in the analysis of the efficiencies of the flotation and photo-oxidation processes to remove and decompose the organic compounds present in the produced water. A series of surfactants derivated from the laurilic alcohol was utilized in the flotation to promote the separation. The experiments have been performed with a synthetic wastewater, carefully prepared with xylene. The experimental data obtained using flotation presented a first order kinetic, identified by the quality of the linear data fitting. The best conditions were found at 0.029 g.L-1 for the surfactant EO 7, 0.05 g.L-1 for EO 8, 0.07 g.L-1 for EO 9, 0.045 g.L-1 for EO 10 and 0.08 g.L-1 for EO 23 with the following estimated kinetic constants: 0.1765, 0.1325, 0.1210, 0.1531 and 0.1699 min-1, respectively. For the series studied, the most suitable surfactant was the EO 7 due to the lower reagent onsumption, higher separation rate constant and higher removal efficiency of xylene in the aqueous phase (98%). Similarly to the flotation, the photo-Fenton process shows to be efficient for degradation of xylene and promoting the mineralization of the organic charge around 90% and 100% in 90 min

Análise dos Processos de Flotação e Oxidação Avançada para o Tratamento de Efluente Modelo da Indústria do Petróleo

The generation of wastes in most industrial process is inevitable. In the petroleum industry, one of the greatest problems for the environment is the huge amount of produced water generated in the oil fields. This wastewater is a complex mixture and present great amounts. These effluents can be hazardous to the environmental without adequate treatment. This research is focused in the analysis of the efficiencies of the flotation and photo-oxidation processes to remove and decompose the organic compounds present in the produced water. A series of surfactants derivated from the laurilic alcohol was utilized in the flotation to promote the separation. The experiments have been performed with a synthetic wastewater, carefully prepared with xylene. The experimental data obtained using flotation presented a first order kinetic, identified by the quality of the linear data fitting. The best conditions were found at 0.029 g.L-1 for the surfactant EO 7, 0.05 g.L-1 for EO 8, 0.07 g.L-1 for EO 9, 0.045 g.L-1 for EO 10 and 0.08 g.L-1 for EO 23 with the following estimated kinetic constants: 0.1765, 0.1325, 0.1210, 0.1531 and 0.1699 min-1, respectively. For the series studied, the most suitablesurfactant was the EO 7 due to the lower reagent consumption, higher separation rate constant and higher removal efficiency of xylene in the aqueous phase (98%). Similarly to the flotation, the photo-Fenton process shows to be efficient for degradation of xylene and promoting the mineralization of the organic charge around 90% and 100% in 90 min

O desenvolvimento da indústria da reciclagem dos materiais no Brasil: motivação econômica ou benefício ambiental conseguido com a atividade?

A indústria de reciclagem vem se desenvolvendo no Brasil desde o começo dos anos noventa, o que resulta em elevados índices de reciclagem e tecnologia de ponta na reciclagem de alguns materiais. Requisitada como estratégia para a gestão dos resíduos no destino final, a reciclagem possui a particularidade de ser uma atividade econômica bastante rentável. Este artigo analisa os índices da indústria de reciclagem dos materiais no Brasil. Com base nos resultados obtidos através da consulta bibliográfica e dados estatísticos oriundos de fontes primárias e secundárias, conclui-se que a atividade da reciclagem dos materiais no Brasil se presta a satisfazer exclusivamente às demandas econômicas do setor. Neste sentido, a contribuição ambiental da reciclagem perde relevância visto que o crescimento da atividade está condicionado às demandas da cadeia produtiva industrial

Reconfiguração dinâmica de estratégias distribuídas em dispositivos foundation fieldbus para a otimização de processos na indústria do petróleo

The petrochemical industry has as objective obtain, from crude oil, some products with a higher commercial value and a bigger industrial utility for energy purposes. These industrial processes are complex, commonly operating with large production volume and in restricted operation conditions. The operation control in optimized and stable conditions is important to keep obtained products quality and the industrial plant safety. Currently, industrial network has been attained evidence when there is a need to make the process control in a distributed way. The Foundation Fieldbus protocol for industrial network, for its interoperability feature and its user interface organized in simple configuration blocks, has great notoriety among industrial automation network group. This present work puts together some benefits brought by industrial network technology to petrochemical industrial processes inherent complexity. For this, a dynamic reconfiguration system for intelligent strategies (artificial neural networks, for example) based on the protocol user application layer is proposed which might allow different applications use in a particular process, without operators intervention and with necessary guarantees for the proper plant functioning

Avaliação da potencialidade de uso do resíduo proveniente da indústria de beneficiamento do caulim na produção de piso cerâmico

FORMIGA, Felipe Lira et al. Avaliação da Potencialidade de Uso do Resíduo Proveniente da Indústria de Beneficiamento do Caulim na Produção de Piso Cerâmico. Cerâmica Industrial, v. 14, p. 41-45, 2009.

Responsabilidade social empresarial: o caso de uma indústria alimentícia no estado do Pará

The theme of corporate social responsibility (CSR) provides discussion and analysis and relatively recent, particularly in the last twenty years, has grown into the world as well as in Brazil, the interest on the involvement of the business sector in social activities or projects facing combating poverty. However, a lack of socialization of successful experiences in the practice of CSR and clarity and consensus concepts generate deviations of understanding on the subject and the structuring of interventions. This research aimed to reveal how corporate social responsibility of the IMA Food was developed from Project Nursery Saci. The research took place under a qualitative approach of descriptive-explanatory, conducted through semi-structured interviews and non-participatory observation and interviewed 35 people in total. The interpretation and analysis of data occurred through a categorical content analysis, having as theoretical approach to socioeconomic CSR. The results showed that the major form of social responsibility of the Food IMA is based on a classical approach of CSR, focusing on philanthropy. The absence of a more systematic management of the project and reflect the fragility, instability and lack of commitment towards the community. The contributions generated by the project are substantial and important, but do not reach the development occasioned by the company. However, none of this invalidates the initiative of the organization's commitment to the community, however, requires a reassessment and restructuring of the proposal in a way that leverages the performance of the project and the company itself and it can more effectively contribute to society

Apoio governamental à inovação Tecnológica: análise da indústria farmacêutica paraense

The transformations economical, cultural and social that happen in world ambit they are associated to the intense progress and expansion of new technologies, forcing governments, people, companies and nations to the introduction of new patterns of behavior, forcing, in that way, to the continuous renewal of products and technological processes to maintain the competitiveness, so much among nations, as in the managerial world. In that matter, the technological innovation is recognized as basic factor of maintainable economical competitiveness, being the responsible for the breaking and/or improvement of the techniques and production processes, what presupposes the systematization varied institutional arrangements that they involve firms, interaction nets among companies, government agencies, universities, research institutes, laboratories of companies and scientists and engineers activities. Those arrangements, to the if they articulate with the educational system, with the industrial and managerial section and, also, with the financial institutions, they take the form that Freeman (1987) it coined of national system of innovation, promoted through public politics of CT&I, which seek to induce and to support innovative initiatives in the companies, as well as to establish demands and to prioritize vocations and regional potentialities. In that context of government support to the technological innovation interferes this study, that it looked for to know the reasons of the fragility innovative in the pharmaceutical industry of State of Pará in Brazil, pointed for PINTEC (2005), starting from the point of view of the businessmen of that section. For such, the qualitative approach was used - with interviews directing semi and the technique of the content analysis. The results of the research pointed that the fragilities innovative of the section links to the ignorance of the government support to the technological innovation on the part of the businessmen of the pharmaceutical industry of State of Pará in Brazil

Motivação e satisfação à luz do modelo ASH: estudo de caso em indústria de alimentos

Neste estudo, foram examinadas as relações existentes entre a motivação e a satisfação do trabalhador no espaço laboral. O estudo empírico foi conduzido em uma única etapa, por meio da qual buscou-se conhecer as dimensões latentes identificadas e, a partir das dimensões validadas, buscou-se estabelecer relações com características motivacionais, como antecedentes, e satisfação pelo trabalho realizado, como conseqüência do atendimento das necessidades manifestadas pelo trabalhador. Foram entrevistados 38 (trinta e oito) funcionários da empresa Água Mineral Cristalina, incluindo-se os que ocupam cargos de chefia. Como instrumento de coleta de dados, foi utilizada parte do complexo da Auditoria do Sistema Humano ASH, criado por Quijano (1999), que se trata de um modelo de pesquisa na área de Psicologia Social, incluindo a Administração de Recursos Humanos, que analisa os processos psicológicos e psicossociais nas organizações. Para esta pesquisa, foram utilizados dois formulários sugeridos pelo autor citado, (anexos 01 e 02). O primeiro denomina-se condições para a motivação , com 15 (quinze) questões do tipo likert. O segundo, "trabalho bem feito e satisfação de necessidades", tem 22 (vinte e duas) questões, também do tipo likert. O instrumento foi respondido por colaboradores, independente da posição hierárquica, em aproximadamente 10 (dez) a 15 (quinze) minutos. A aplicação foi realizada diretamente pelo pesquisador nas unidades de produção e de administração da empresa. Por meio de modelagem de equações estruturais, foi estabelecido um modelo de relações causais entre as dimensões latentes relacionadas à motivação e o desempenho do empregado quando tem satisfeitas as suas necessidades. Quanto ao tratamento dos dados, este ocorreu de forma quantitativa. Quanto à análise, aconteceu após os dados terem sido tratados. Nesta pesquisa, os dados foram analisados por meio de estatísticas descritivas, atualizando-se os recursos de softwares específicos como Statistic ou SPSS Statistic Package for Social Sciences. Usou-se a técnica de Análise de Regressão, na qual foi utilizado o método STEPWISE que inclui na equação de explicação de uma variável dependente somente aquelas que auxiliam ou incrementam sua explicação. Como variáveis dependentes, foram utilizadas as variáveis do formulário "trabalho bem feito e satisfação de necessidades" e como variável independe as variáveis do questionário "condições para motivação". Sob o ponto de vista prático, este estudo mostrou que um determinado conjunto de características motivacionais influi positivamente na satisfação do trabalhador, que poderá realizar um trabalho bem feito; do lado teórico, a pesquisa verificou explicitamente a hipótese de que os aspectos motivacionais contribuem para que o empregado, sentindo-se satisfeito, desempenhe melhor as atribuições que lhe são conferidas

A ideologia da encenação: uma análise dos aspectos cênico/ideológicos da encenação produzida pela indústria cultural

The research that led to this dissertation adopted a set of scenic/ideological aspects inherent to the productions of the Culture Industry as its object of research. The intellectual output of Theodor W. Adorno and Max Horkheimer underscored the approaches on this subject, since it provides the same set of scenic/ideological features to be explored because, according to the authors, scenes produced by the culture industry are linked to the dominant ideology, since they act in favor of maintaining the status quo. The first objective was the definition this set of features inherent to the scene produced by the culture industry, through the exploration of literature produced by Adorno and Horkheimer, so it was possible to define a set composed of nine elements: Construction of characters as characteristic types; Stereotypes; Naturalization of Stereotyped language; Simplistic playwriting; Reuse dramatic formula; Love and sexuality as themes of plots; Utilization of tragic element; Objetive representation; Approximation of fiction and reality. The second goal was the analysis of scene produced by the culture industry nowadays, so that it was possible to verify if any scenic/ideological aspects indicated by Adorno and Horkheimer in the mid-twentieth century were present among the productions from this beginning of the twenty-first century. Through the analysis of three soap operas produced in Brazil in 2012, it was found that the nine scenic/ideological aspects as indicated by Adorno and Horkheimer appeared in the observed productions. Additionally, a new scenic/ideological feature, not indicated by Adorno and Horkheimer is present: the merchandising

Purificação e caracterização parcial de uma B-D glicosidade de Artemia franciscana com ação sobre celobiose e lactose

-D-glucosidase (EC 3.2.1.21) is one of the most interesting glycosidases, especially for hydrolysis cellobiose releasing glucose, is last step degradation of cellulose. This function makes the -D-glucosidase is of great interest as a versatile industrial biocatalyst, being critical to various bio-treatment / biorefinery processes, such as bioethanol production. Hen in the report, a -D-glucosidase was extracts from protein extracted of the invertebrate marine Artemia franciscana was purified and characterized with a combination of precipitation with ammonium sulfate (0 - 30%, 30 to 50%, 50 to 80%), the fraction saturated in the range of 30 to 50% (called F-II) was applied in a molecular exclusion chromatography, in Sephacryl S-200, the fractions corresponding to the first peak of activity of -D-glucosidase were gathered and applied in a chromatography of ion exchange in Mono Q; the third peak this protein obtained chromatography, which coincides with the peak of activity of -D-glucosidase was held and applied in a gel filtration chromatography Superose 12 where the first peak protein, which has activity of -D-glucosidase was rechromatography on Superose 12. This enzyme is probably multimerica, consisting of three subunit molecular mass of 52.7 kDa (determined by SDS-PAGE) with native molecular mass of 157 kDa (determined by gel filtration chromatography on Superose 12 under the system FPLC). The enzyme was purified 44.09 times with a recovery of 1.01%. Using up p-nitrophenyl-β-D-glucopiranoside as substrate obtained a Km apparent of 0.229 mM and a Vmax of 1.109 mM.60min-1.mL-1mM. The optimum pH and optimum temperature of catalysis of the synthetic substrate were 5.0 and 45 °C, respectively. The activity of the -D-glucosidase was strongly, inhibited by silver nitrate and N- etylmaleimide, this inhibition indicates the involvement of radical sulfidrila the hydrolysis of synthetic substrate. The -D-glucosidase of Artemia franciscana presented degradativa action on celobiose, lactose and on the synthetic substrate -nitrophenyl-β-D-glucopiranoside indicating potential use of this enzyme in the industry mainly for the production of bioethanol (production of alcohol from the participating cellulose), and production hydrolysate milk (devoid of milk lactose)

Análise de falhas em martelos oscilantes dos desfibradores da indústria sucroalcooleira da Região Norte-Nordeste

The failure of materials is always an unwelcome event for several reasons: human lives are put in danger, economic losses, and interference in the availability of products and services. Although the causes of failures and behaviour of materials can be known, the prevention of such a condition is difficult to be guaranteed. Among the failures, wear abrasion by the low voltage is the kind of failure that occurs in more equipment and parts industry. The Plants Sucroalcooleiras suffer significant losses because of such attrition, this fact that motivated their choice for the development of this work. For both, were considered failures in the swing hammers desfibradores stopped soon after the exchange provided in accordance with tonnage of cane processed, then were analyzed by the level of wear testing of rubber wheel defined by the standard ASTM G65-91.The failures were classified as to the origin of the cause and mechanism, moreover, were prepared with samples of welding procedures according to ASME code, sec. IX as well, using the technique of thermal spraying to analyze the performance of these materials produced in laboratories, and compares them with the solder used in the plant. It was observed that the bodies-of-proof prepared by the procedure described as welding, and the thermal spraying the results of losing weight have been minimized significantly compared to the preparations in the plant. This is because the use of techniques more appropriate and more controlled conditions of the parameters of welding. As for the thermal spraying, this technique has presented a satisfactory result, but requires the use of these coatings in the best condition for real affirmation of the results

Estudo de massa cerâmica triaxial visando à otimização do ciclo de queima da indústria de cerâmica estrutural

Over recent years the structural ceramics industry in Brazil has found a very favorable market for growth. However, difficulties related to productivity and product quality are partially inhibiting this possible growth. An alternative for trying to solve these problems and, thus, provide the pottery industry the feasibility of full development, is the substitution of firewood used in the burning process by natural gas. In order to contribute to this process of technological innovation, this paper studies the effect of co-use of ceramic phyllite and kaolin waste on the properties of a clay matrix, verifying the possible benefits that these raw materials can give to the final product, as well as the possibility of such materials to reduce the heat load necessary to obtain products with equal or superior quality. The study was divided into two steps: characterization of materials and study of formulations. Two clays, a phyllite and a residue of kaolin were characterized by the following techniques: laser granulometry, plasticity index by Atterberg limits, X-ray fluorescence, X-ray diffraction, mineralogical composition by Rietveld, thermogravimetric and differential thermal analysis. To study the formulations, specifically for evaluation of technological properties of the parts, was performed an experimental model that combined planning involving a mixture of three components (standard mass x phyllite x kaolin waste) and a 23 factorial design with central point associated with thermal processing parameters. The experiment was performed with restricted strip-plot randomization. In total, 13 compositional points were investigated within the following constraints: phyllite ≤ 20% by weight, kaolin waste ≤ 40% by weight, and standard mass ≥ 60% by weight. The thermal parameters were used at the following levels: 750 and 950 °C to the firing temperature, 5 and 15 °C/min at the heating rate, 15 and 45min to the baseline. The results showed that the introduction of phyllite and/or kaolin waste in ceramic body produced a number of benefits in properties of the final product, such as: decreased absorption of water, apparent porosity and linear retraction at burn; besides the increase in apparent specific mass and mechanical properties of parts. The best results were obtained in the compositional points where the sum of the levels of kaolin waste and phyllite was maximal (40% by weight), as well as conditions which were used in firing temperatures of 950 °C. Regarding the prospect of savings in heat energy required to form the desired microstructure, the phyllite and the residue of kaolin, for having small particle sizes and constitutions mineralogical phases with the presence of fluxes, contributed to the optimization of the firing cycle.

Uso de argilominerais e diatomita como adsorvente de fenóis em águas produzidas na indústria de petróleo

The oil production in Brazil has been increasing each year. Consequently, increasing volumes of water produced are generated with large quantities of contaminants, which brings many problems in disposing of these waters. The concern that the concentrations of contaminants in water produced meet existing laws for disposal of effluents, has been extremely important for the development of different techniques for treatment of water produced. The study of clay minerals as adsorbents of organic contaminants has grown considerably so in order to combine the low cost with the efficiency of environmental preservation and health issues. Thus, this study aims to understand the characteristics of vermiculite clay, sodium bentonite, calcium bentonite and diatomite and evaluate their performance as adsorbents for phenol in the water produced. Through adsorption isotherms it was possible to observe the behavior of these adsorptive clay and diatomite for adsorption of phenol, the main phenolic compound found in water produced. Different concentrations of synthetic solutions of phenol were put in touch with these adsorbents under same conditions of agitation and temperature. The adsorbents were composted adsorptive favorable, but the vermiculite and diatomite showed little capacity for absorption, being suggested for absorbs small concentrations of phenol in the balance isothermal