Efeitos do tratamento superficial da sílica ativa com soluções de ácidos nítrico e fosfórico em propriedades do concreto

The addition of active silica potentially improves the quality of concrete due to its high reactivity and pore refinement effect. The reactivity of silica is likely related to its charge density. Variations in surface charge alter the reactivity of the material consequently affecting the properties of concrete. The present study aimed at investigating variations in the charge density of silica as a function of acid treatments using nitric or phosphoric acid and different pH values (2.0, 4.0 and 6.0). Effects on concrete properties including slump, mechanical strength, permeability and chloride corrosion were evaluated. To that end, a statistical analysis was carried out and empirical models that correlate studied parameters (pH, acid and cement) with concrete properties were established. The quality of the models was tested by variance analysis. The results revealed that the addition of silica was efficiency in improving the properties of concrete, especially the electrochemical parameters. The addition of silica treated using nitric acid at pH = 4.0 displayed the best cement performance including highest strength, reduced permeability and lowest corrosion current

Aplicação de sistemas microemulsionados ácidos em acidificação de poços

Stimulation operations have with main objective restore or improve the productivity or injectivity rate in wells. Acidizing is one of the most important operations of well stimulation, consist in inject acid solutions in the formation under fracture formation pressure. Acidizing have like main purpose remove near wellbore damage, caused by drilling or workover operations, can be use in sandstones and in carbonate formations. A critical step in acidizing operation is the control of acid-formation reaction. The high kinetic rate of this reaction, promotes the consumed of the acid in region near well, causing that the acid treatment not achive the desired distance. In this way, the damage zone can not be bypassed. The main objective of this work was obtain stable systems resistant to the different conditions found in field application, evaluate the kinetic of calcite dissolution in microemulsion systems and simulate the injection of this systems by performing experiments in plugs. The systems were obtained from two non ionic surfactants, Unitol L90 and Renex 110, with sec-butanol and n-butanol like cosurfactants. The oily component of the microemlsion was xilene and kerosene. The acqueous component was a solution of HCl 15-26,1%. The results shown that the microemulsion systems obtained were stable to temperature until 100ºC, high calcium concentrations, salinity until 35000 ppm and HCl concentrations until 25%. The time for calcite dissolution in microemulsion media was 14 times slower than in aqueous HCl 15%. The simulation in plugs showed that microemulsion systems promote a distributed flux and promoted longer channels. The permeability enhancement was between 177 - 890%. The results showed that the microemulsion systems obtained have potential to be applied in matrix acidizing

Emprego dos ácidos graxos de cadeia curta na colite de derivação fecal : estudo em ratos Wistar

Diversion colitis is a chronic inflammatory process affecting the dysfunctional colon, after a colostomy. It is postulated that nutritional deficiency of the colonic epithelium by the absence of short-chain fatty acids (SCFA) is one of the factors responsible for the appearance of DC and that their employment could reverse the morphological changes of the mucosa. The treatment of choice for fecal diversion colitis (DC) is the reconstruction of the intestinal tract, although they suggested therapeutic options using enemas. This study evaluates the effect of SCFA in atrophy and inflammation in excluded colonic segments before and after the installation DC. Forty Wistar rats were divided into four groups (n = 10 for each group), submitted colostomy with distal colon exclusion. Two control groups (A1 and B1) received rectally administered physiological saline, whereas two experimental groups (A2 and B2) received rectally administered short-chain fatty-acids. The A groups were prophylactically treated (5th to 40th days postoperatively), whereas the B groups were therapeutically treated (after postoperative day 40), for 07 days. Histological sections stained with HE were used for histological analysis of the thickness of the colonic mucosa excluded (t- Student p ≤0.05). Inflammatory reaction of the lamina propria and mucosa were measured with scores previously established (Mann Whitney p ≤ 0.05). There was a significant thickness recovery of the colonic mucosa in group B2 animals (p = 0.0001), which also exhibited a significant reduction in the number of eosinophilic polymorphonuclear cells in the lamina propria (p = 0.0126) and in the intestinal lumen (p = 0.0256). Group A2 did not prevent the mucosal atrophy and significant increases in the numbers of lymphocytes (p=0.0006) and 50 eosinophilic polymorphonuclear cells in the lamina propria of the mucosa (p = 0.0022). Therapeutic use of short-chain fatty-acids significantly reduced eosinophilic polymorphonuclear cell numbers in the intestinal wall and in the colonic lumen; it also reversed the atrophy of the colonic mucosa. Prophylactic use did not impede the development of mucosal atrophy

Aplicação de sabões de ácidos graxos epoxidados como inibidores de corrosão em oleoduto

Corrosion usually occurs in pipelines, so that it is necessary to develop new surface treatments to control it. Surfactants have played an outstanding role in this field due to its capacity of adsorbing on metal surfaces, resulting in interfaces with structures that protect the metal at low surfactant concentrations. The appearance of new surfactants is a contribution to the area, as they increase the possibility of corrosion control at specific conditions that a particular oil field presents. The aim of this work is to synthesize the surfactants sodium 12 hydroxyocadecenoate (SAR), sodium 9,10-epoxy-12 hydroxyocadecanoate (SEAR), and sodium 9,10:12,13-diepoxy-octadecanoate (SEAL) and apply them as corrosion inhibitors, studying their action in environments with different salinities and at different temperatures. The conditions used in this work were chosen in order to reproduce oil field reality. The study of the micellization of these surfactants in the liquid-gas interface was carried out using surface tensiometry. It was observed that cmc increased as salt concentration was increased, and temperature and pH were decreased, while cmc decreased with the addition of two epoxy groups in the molecule. Using the values of cmc and the Gibbs equation, the values of Gibbs free energy of adsorption, area per adsorbed molecule, and surface excess were calculated. The surface excess increases as salt concentration and temperature decreases, increasing as pH is increased. The area per adsorbed molecule and the free energy of adsorption decrease with salt concentration, temperature, and pH increase. SAXS results showed that the addition of epoxy group in surfactant structure results in a decrease in the repulsion between the micelles, favoring the formation of more oblong micellar structures, ensuring a better efficiency of metal coverage. The increase in salt and surfactant concentrations provides an increase in micellar diameter. It was shown that the increase in temperature does not influence micellar structure, indicating thermal stability that is advantageous for use as corrosion inhibitor. The results of inhibition efficiency for the surfactants SEAR and SEAL were considered the best ones. Above cmc, adsorption occurred by the migration of micelles from the bulk of the solution to the metal surface, while at concentrations below cmc film formation must be due to the adsorption of semi-micellar and monomeric structures, certainly due to the presence of the epoxy group, which allows side interactions of the molecule with the metal surface. The metal resistance to corrosion presented values of 90% of efficiency. The application of Langmuir and Frumkin isotherms showed that the later gives a better description of adsorption because the model takes into account side interactions from the adsorbing molecules. Wettability results showed that micelle formation on the solid surface occurs at concentrations in the magnitude of 10-3 M, which isthe value found in the cmc study. This value also justifies the maximum efficiencies obtained for the measurements of corrosion resistance at this concentration. The values of contact angle as a function of time suggest that adsorption increases with time, due to the formation of micellar structures on metal surface

Síntese e caracterização de redes metalorgânicas baseadas em zinco e ácidos benzenodicarboxílicos

Metal Organic Frameworks (MOFs) are supramolecular structures consisted of ions or metal clusters coordinated to organic ligands which are repeated in two or three dimensions. These structures have atracted much attention due to their properties such as low density, high specific surface area and large volume of pores. In this work, MOFs consisted of zinc clusters connected by ditopic ligands, terephthalic acid (1,4- H2BDC) or isophthalic acid (1,3-H2BDC) were synthesized. To obtain the proposed materials, different routes and synthetic parameters were tested, such as the molar ratio of the precursors, the addition of template molecules, the type of solvente, the addition of organic base or the type of a counter-ion of Zn salt. It was found that the variation of these parameters led to the formation of different metalorganic structures. The solids obtained were characterized by XRD, SEM and IR. For the samples identified as MOF- 5, it was verified that the structure was composed of both interpenetrated and non interpenetrated structures. These samples showed a low stability, becoming totally transformed into another structure within less than 72 hours. The addition of the nickel and/or cobalt was found to be a promissing method for increasing the stability of MOF- 5, which in this case, still remained unconverted to another structure even after 15 days of exposure to air. The samples prepared from 1,3-H2BDC were probably new, still unknown Metal Organic Frameworks

Possibilidades de enfoque CTS para o ensino superior de química: proposta de uma abordagem para ácidos e bases

Scientific education has been passing by redefinitions, contestations and new contributions from the research on science teaching. One contribution is the idea of science and technology literacy, allowing the citizens not only knowing science but also understand aspects on the construction and motivation of scientific and technological research. In accordance with this idea, there is the Science-Technology-Society (STS) studies which, since the 1970s, has been contributing for science teaching and learning according to the comprehension of the relationships with society in the Western countries of the North. In Brazil, this approach began to gain projection from the 1990s when the first essays on the theme were published. Currently, there is a clear influence of this approach on the national curriculum guidelines, especially for the area of Natural Sciences, and also on the textbooks chosen by the High School National Program (Programa Nacional do Ensino Médio). However, there seems to be a gap in relation to the discussion on the specific curricular component seen in college on this approach. Thus, this study aims at adopting the approach STS, face to the preparation of complimentary educational material on acid and bases concepts studied in the course of General Chemistry of the Natural Sciences graduation program. To this end, it was performed a bibliographical research aiming at making the state-of-the-art in in these concepts in specific literature to science teaching. It is divided in two stages: systematic study (with sixteen journals chosen according to Qualis-Capes and an unsystematic study with direct search in databases and references in the papers of the systematic study. The studies had their content analyzed and the categories chosen a priori were the level of education, the acid-base theory adopted, and the strategy/theoretical frame of reference adopted. A second stage aimed at identifying attitudes and beliefs on STS (Science-Technology-Society) and CSE (Chemistry-Society-Environment) of students in the teacher and technologist training course in three diferent institutions: UTFPR, UFRN and IFRN. In this study, it was used two questionnaires, composed of a Likert scale, semantic differential scale and open questions. The quantitative data reliability was estimated through Cronbach’s alpha method, and tha data were treated according to classic statistics, using the mean as the centrality measures, and the mean deviation as dispersion. The qualitative data were treated according to the content analysis with categories taken from the reading of answers. In the third stage, it was analyzed the presence of STS and CSE content in chapters on acid and bases concepts of nine General Chemistry textbooks, frequently used in graduation programs in public institutions of the state of Rio Grande do Norte. The results showed that there are few proposals of acid and bases teaching, and they are generally aimed at High School or at instrumentation for teaching courses, and no course for General Chemistry. The student’s attitudes and beliefs show the presence of a positivist point of view based on the concept of Science and Technology neutrality and the salvation of its mediation. The books analysis showed just a few content on STS and CSE are found in the studied chapters, and they are generally presented disjointedly in relation to the rest of the main text. In the end, as suggestion to solve the absence of proposals STS in General Chemistry books, as well as the student’s positivist attitudes, it was developed some educational material to be used in the course of General Chemistry at College. The material is structured to introduce a historical view of the concepts preparation, present the use of materials, the industrial and technological processes, and social and environmental consequences of this activities

Características físico-químicas, sensoriais e perfil de ácidos graxos do leite de cabras saanen alimentadas com cactáceas

The objective of this research was to evaluate the influence of the supply of five types of native and exotic cacti Brazilian semiarid northeast on the sensory characteristics of milk of Saanen goats. Five multiparous goats were used with nine weeks of lactation, average live weight of 50 kg ± 4 kg., confined and distributed in a Latin square design 5 x 5 with five experimental diets and five periods. Each period lasted 17 days, with 10 days of adaptation to the diets of the animals and seven days for the data collection. The treatments were defined based on dry matter consisted of: 47.33 to 50.12% of a cactus (“Xiquexique”, “Mandacaru”, “Facheiro” or two species of forage cactus “Miúda” or “Orelha de Elefante Mexicana”) more 18.78 to 19.79% hay of plant “Sabiá” and 31.10 to 32.89% of concentrate. There was not effect of the experimental diets in the physical and chemical composition of milk for fat, total solids and salts, which showed mean values of 3.24%; 11.30% and 0.66%, respectively. However the protein, lactose, nonfat dry extract and freezing point were affected by diets. In the profile of fatty acids was higher concentration of fatty short and medium chain fatty acids, however, there were not changes between treatments, except for the butyric acid (C4:0), with mean values of 4.24% (“Orelha de Elefante Mexicana”) to 6.05% (“Facheiro”). The diets also did not provide sensory changes in milk for the parameters: odor, flavor, aftertaste and overall assessment. The use of the five cactus in the diet of dairy goats do not influence the sensory characteristics and lipid profile of milk. The physical and chemical composition of milk was showed within the minimum requirements of current legislation, except for nonfat dry extract and freezing point.

Avaliação das características de carcaça e perfil dos ácidos graxos em suínos na fase de terminação, alimentados com dietas contendo farelo de bagaço de caju

Provide healthier meat to consumers of pig farmers has required an adjustment of nutrition and feed management. Nutrition is a primary factor in defining the qualitative aspects of pork, because through it we can modify the fatty acid profile. The objective of this study was to analyze the effects of adding bran bagasse cashew (FBC) in diets for finishing pigs, on carcass traits and meat quality. 20 crossbred barrows with an average initial weight of 57.93 ± 3.67 kg / BW were used Diets were formulated based on corn and soybean meal containing vegetable oil, commercial core and different levels of inclusion of the bran bagasse cashew ( 0.0, 7.5 % , 15.0 % , 22.5 % and 30.0 % ) . The experimental design was a randomized block with 5 treatments and 4 replications. Quantitative, qualitative, fatty acid profile of the longissimus muscle and fat area parameters were evaluated. It was observed that with the inclusion of FBC, the parameters of carcass yield, backfat thickness, fat area had a negative linear effect relationship and meat / fat positive effect. Regarding the profile of fatty acids in fat area, the content of linoleic fatty acid level of 30 % of FBC was 18.2 % higher ( P < 0.05 ) at the level of 0.0 % and the arachidonic level of 22.5 % was higher than 33.3 % and 37.5 % at levels of 0.0 % and 15.0 % ( FBC ) respectively. It is concluded that finishing pigs may be food diets containing up to 30 % of FBC, improving the quality of housing for lower fat deposition and modification in the fatty acid profile.

Síntese, estrutura e propriedades de polímeros de coordenação à base de íons lantanídeos e ácidos benzenodicarboxílicos

Metal Organic Frameworks (MOFs) are hybrids materials, often crystalline, consisting of metal or metal clusters, connected by polytopic organic ligands repetitively, leading to structures, usually porous. In this work, MOFs based on lanthanide ions (La3+ and Gd3+) and dicarboxylate type of ligands (isophthalic and terephthalic acids), were synthesized by hydrothermal, solvothermal and hydro(solvo)thermal methods. The effects of the synthetic route as well as the type of heating, conventional or by microwave, on the structure and properties of MOFs were studied. The powder samples obtained were characterized by X-ray diffraction, infrared spectroscopy, thermal analysis and scanning electron microscopy. The results suggest that the addition of an organic or inorganic base is needed to promote the deprotonation of the ligand, since in the samples prepared by the hydrothermal method, without the use of a base, no formation of the metalorganic framework was observed. On the other hand, the presence of DMF as solvent or cosolvent, afforded the deprotonation of the ligand with the consequent formation of MOFs. At least two different crystalline structures were identified for the samples prepared with terephthalic acid. These samples are isostructural with those reported for phases Eu(1,3-BDC)DMF, Eu2(1,4-BDC)3 (DMF)2 and Tb(1,4-BDC)H2O. The presence of water in the reaction medium in the hydro(solvo)thermal method, provoked the growth of the structure different from that observed in the absence of water. This can be explained by the difference in the coordination mode of water and DMF to lanthanide ions. Although not identified by XRD, the samples prepared with isophthalic acid, also present metalorganic structures, which was confirmed by the presence of the characteristic displacement of the carbonyl group band in their infrared spectra, compared to the spectrum of the pure ligand. This shift was also observed in the samples prepared with terephthalic acid. Thermal analisys shows that the metal organic frameworks do not collapse occurs at a temperature below 430°C.The analysis of scanning electron microscopy suggests that the morphology of powders is highly dependent on the type of heating used, conventional or by microwave.

Materiais a base de estruturas carbonáceas para a remoção de ácidos húmicos em soluções aquosas através da adsorção e oxidação

O presente estudo aborda a utilização de carvão ativado comercial na remoção de ácidos húmicos em meio aquoso. O objetivo principal é desenvolver e caracterizar materiais carbonáceos visando aplicações de remoção de ácidos húmicos em meio aquoso por processos de adsorção e oxidação. Testes de remoção do poluente foram desenvolvidos com a utilização do carvão comercial, carvão modificado a partir de tratamentos ácidos e compósito confeccionado com a impregnação de ferro no carvão. Espumas de carbono com dispersões de carvão ativado e óxidos de ferro também foram desenvolvidas buscando aplicações de remoção do poluente através de processos eletroquímicos. Os resultados das caracterizações demonstraram ganho de área superficial a partir do tratamento ácido, a presença dispersa de ferro em todo carvão na forma de fase maghemita com a introdução do metal, e ganho de estabilidade eletroquímica na espuma, com a presença de dispersões de carvão ativados impregnados com ferro. O processo oxidativo Fenton, foto assistido por radiação UV, demonstrou maior eficiência para remoção do ácido húmico em água.

Efeitos do tratamento superficial da sílica ativa com soluções de ácidos nítrico e fosfórico em propriedades do concreto

The addition of active silica potentially improves the quality of concrete due to its high reactivity and pore refinement effect. The reactivity of silica is likely related to its charge density. Variations in surface charge alter the reactivity of the material consequently affecting the properties of concrete. The present study aimed at investigating variations in the charge density of silica as a function of acid treatments using nitric or phosphoric acid and different pH values (2.0, 4.0 and 6.0). Effects on concrete properties including slump, mechanical strength, permeability and chloride corrosion were evaluated. To that end, a statistical analysis was carried out and empirical models that correlate studied parameters (pH, acid and cement) with concrete properties were established. The quality of the models was tested by variance analysis. The results revealed that the addition of silica was efficiency in improving the properties of concrete, especially the electrochemical parameters. The addition of silica treated using nitric acid at pH = 4.0 displayed the best cement performance including highest strength, reduced permeability and lowest corrosion current

Aplicação de sistemas microemulsionados ácidos em acidificação de poços

Stimulation operations have with main objective restore or improve the productivity or injectivity rate in wells. Acidizing is one of the most important operations of well stimulation, consist in inject acid solutions in the formation under fracture formation pressure. Acidizing have like main purpose remove near wellbore damage, caused by drilling or workover operations, can be use in sandstones and in carbonate formations. A critical step in acidizing operation is the control of acid-formation reaction. The high kinetic rate of this reaction, promotes the consumed of the acid in region near well, causing that the acid treatment not achive the desired distance. In this way, the damage zone can not be bypassed. The main objective of this work was obtain stable systems resistant to the different conditions found in field application, evaluate the kinetic of calcite dissolution in microemulsion systems and simulate the injection of this systems by performing experiments in plugs. The systems were obtained from two non ionic surfactants, Unitol L90 and Renex 110, with sec-butanol and n-butanol like cosurfactants. The oily component of the microemlsion was xilene and kerosene. The acqueous component was a solution of HCl 15-26,1%. The results shown that the microemulsion systems obtained were stable to temperature until 100ºC, high calcium concentrations, salinity until 35000 ppm and HCl concentrations until 25%. The time for calcite dissolution in microemulsion media was 14 times slower than in aqueous HCl 15%. The simulation in plugs showed that microemulsion systems promote a distributed flux and promoted longer channels. The permeability enhancement was between 177 - 890%. The results showed that the microemulsion systems obtained have potential to be applied in matrix acidizing

Colite de derivação fecal

A colite de derivação fecal (CD) é um processo inflamatório que ocorre no segmento colorretal desfuncionalizado, após uma cirurgia de desvio do trânsito intestinal. As principais características dessa entidade clínica são: apresenta-se na desfuncionalização do cólon ou reto; não há doença inflamatória intestinal preexistente; nunca acomete o sítio proximal à colostomia e ocorre resolução do processo após a restauração do trânsito intestinal. Diversas são as hipóteses postuladas para explicar o seu aparecimento; todavia, a deficiência nutricional do epitélio colônico, pela ausência dos ácidos graxos de cadeia curta (AGCC), no segmento desfuncionalizado, é a mais aceita na atualidade. Os autores fazem uma revisão da literatura enfocando os aspectos clínicos, histopatológicos e terapêuticos desta doença

Prevenção de úlceras por pressão segundo a perspectiva do enfermeiro intensivista

Analisar a atuação dos enfermeiros de unidade de terapia intensiva na prevenção da úlcera por pressão. Método: trata-se de estudo descritivo desenvolvido com 13 enfermeiros da unidade de terapia intensiva do Hospital Universitário Onofre Lopes (HUOL), em Natal-RN. Foi aplicado um questionário, submetido à análise de conteúdo temática. O estudo foi aprovado pelo Comitê de Ética da Universidade Federal do Rio Grande do Norte (UFRN), sob o CAAE n. 0240.0.051.000-10. Resultados: os enfermeiros reportaram a realização da mudança de decúbito, a avaliação de risco, a discussão com os colegas sobre as medidas adotadas, a higiene e hidratação da pele do paciente através de uso de ácidos graxos essenciais e hidratante corporal, o cuidado com a disposição dos lençóis, de forma a evitar dobras, a utilização de colchão de ar e a aplicação de placas de hidrocoloide nas proeminências ósseas. Conclusão: a prática da prevenção das úlceras por pressão aplicada pelos enfermeiros da unidade de terapia intensiva ocorre sem padronização dos cuidados

Extração, caracterização estrutural e atividades farmacológicas do olginato obtido da alga marrom Lobophora variegata (Lamouroux) Oliveira Filho, 1977

The alginic acid or alginates are acidic polysaccharides found in brown seaweed widely used in food, cosmetic, medical and pharmaceutical industry. This paper proposes the extraction, chemical characterization and verification of the pharmacological activities of brown seaweed variegata Lobophora . The alginate was extracted from the seaweed Lobophora variegata and part was sulphated for comparative purposes. The native extract showed 42% total sugar, 65% uronic acid, 0,36 % protein and 0% of sulfate, while the sulfate showed 39% , 60%, 0.36% and 27,92 % respectively. The presence of a sulfate group may be observed by the metachromasia with toluidine blue in electrophoresis system and characteristic vibration 1262,34 cm-1 in infrared spectroscopy connections assigned to S = O. We observed the formation of films and beads of native alginate, where more concentrated solution 6% resulted in a thicker and more consistent film. Native alginate showed proliferative activity at concentrations (25 and 50 mcg), (50 mg) and (100 mg) in 3T3 cell line in 24h, 48h and 72h, respectively , as the sulfated (100 mg) in 24 . Also showed antiproliferative or cytotoxic activity in HeLa cells of strain, (25 and 100 mg), (25 and 100 mg) and (25, 50 and 100 mg), to native, now for the sulfate concentrations (100 mg) in 24 (25, 50 and 100 mg) in 48 hours, and (50 and 100 mg ) 72h. For their antioxidant activity, the sulfated alginates have better total antioxidant activity reaching 29 % of the native activity while 7.5 % of activity . For the hydroxyl radical AS showed high inhibition ( between 77-83 % ) in concentrations, but the AN surpassed these numbers in the order of 78-92 % inhibition. The reducing power of AN and AS ranged between 39-82 % . In the method of ferric chelation NA reached 100 % chelating while the AS remained at a plateau oscillating 6.5%. However, in this study , we found alginates with promising pharmacological activities, to use in various industries as an antioxidant / anti-tumor compound