Avaliação clínica de pacientes submetidos à colocação de implantes zigomáticos pela técnica de Stella & Warner

This study aimed to evaluate patients who underwent placement of zygomatic implants technique by Stella & Warner, considering the survival of conventional and zygomatic implants, sinus health and level of patient satisfaction in relation to oral rehabilitation. We evaluated 28 patients where 14 had received conventional and zygomatic implants, being rehabilitated with implant-fixed dentures (group 1) and 14 were rehabilitated only with conventional implants and implant-fixed dentures (group 2). The study had four phases, represented by radiographic evaluation of implants (stage I), clinical evaluation (stage II), assessing the health of the maxillary sinus (stage III) and a questionnaire to measure satisfaction of rehabilitation with fixed prosthesis implant Total -backed (stage IV). Group 2 underwent only stage IV, while group 1 participated in all stages. Descriptive analysis and statistics were performed, using the t test for independent samples in the evaluation of phase IV. The results demonstrated that the technique of Stella & Warner proved effective, allowing a high survival rate of conventional implants and zygomatic (100%), considering a minimum follow-up of 15 months and maximum 53 months after prosthetic rehabilitation. There were no pathological changes in tissues periimplants conventional and zygomatic implants analyzed. Radiographic findings showed satisfactory levels bone implants in the oral rehabilitation with conventional zygomatic implants and a good positioning of the apex of the zygomatic implants over the zygomatic bone. The presence of the zygomatic implant did not cause sinus and the t test showed a satisfaction index lower in group 1 compared with group 2. The zygomatic implant placement technique by Stella & Warner proved to be a predictable technique with high survival rate in patients with atrophic jaws, necessitating long-term follow-up to confirm the initial findings of the study

Avaliação clínica e radiográfica das complicações técnicas em próteses sobre implantes

The evaluation criteria of the cases treated with dental implants are based on clinical and radiographic tests. In this context it is important to conduct research to determine prognosis of different types of prosthetic rehabilitation and determination of the main problems affecting this type of treatment. Thus, the objective of this study was to assess the prosthetic conditions of individuals rehabilitated with implant-supported prosthesis. In this cross-sectional study 153 patients were treated, accounting for a sample of 509 implants. The failures were observed by clinical and radiographic examination. The results showed that the fracture (0.2%) loss (0.4%) and loosening of the screws (3.3%) were failures are less frequent. The fracture structures as the resin (12.4%), porcelain (5.5%) and metallic (1.5%), loss of resin that covers the screw (23.8%) and loss of retention overdentures on implants (18.6%) had a higher occurrence. The failure of adaptation between the abutment and the implant (6.9%) and especially between the prosthesis and the abutment (25.4%) had a high prevalence and, when related to other parameters showed a significant association, particularly with the cemented prosthesis (OR = 6.79). It can be concluded that to minimize the appearance of failures, protocols must be observed from diagnosis to the settlement and control of prostheses on implants, particularly with respect to technical steps of the making of the prosthesis and care in radiographic evaluating the fit between their components

Impacto da cárie precoce severa na infância na qualidade de vida relacionada à saúde bucal de pré-escolares sob privação social

Early childhood caries, especially in its severe form, which is characterized by an acute and aggressive nature, can have negative impacts on thequality of life of a child, due to effects such as difficulty in chewing, decreased appetite, weight loss, insomnia, changes in behavior and a decreased performance in school, among others. Moreover, the quality of life of the child`s family can also be affected, as the pain and discomfort caused by this type of caries result in loss of working days of parents, spending on dental treatments, changes in sleep patterns and stress. The aim of this study was to evaluate the impact of severe early childhood caries in the Oral Health-Related Quality of Life (OHRQoL) of public daycares`s preschool children through the Escala de Impacto da Saúde Bucal na Primeira Infância, a Brazilian version of the Early Childhood Oral Health Impact Scale (ECOHIS). A single calibrated examiner (kappa=1.0) evaluated, through the dmfs index, the oral health of 116 children aged between 3 and 5, which were included in one of three study groups: "caries-free", "not-severe early childhood caries" and "severe early childhood caries". The parents responded to ECOHIS, to assess their perception regarding the OHRQoL of their children, and a questionnaire on socioeconomic conditions. The OHRQoL was measured through the total scores and domains of ECOHIS. Descriptive analysis, Mann-Whitney test, Kruskal-Wallis test, chi-square test and Poisson multiple regression with robust variance were used. Among the children observed, 38.8% were caries-free, 27.6% showed not-severe early childhood caries and 33.6% showed severe early childhood caries. Regarding the total score of ECOHIS, severe early childhood caries had a greater negative impact on OHRQoL, compared to caries-free and not-severe early childhood caries groups (p <0.001). Regarding the child subscale, there was significant difference between the "severe early childhood caries" group and the other groups in all domains, except for theone of self-image / social interaction. In the family subscale domains, there was statistical significance between the severe early childhood caries and the caries-free groups in all domains (p <0.001), whereas between the "severe early childhood caries and not-severe early childhood caries groups there was a statistically significant difference only in the domain of parental anguish (p <0.001). Multivariate analysis showed that early childhood caries and the parent`s age were significantly associated to OHRQoL (p <0.05), independently of the other variables in the model. The presence of severe early childhood caries resulted in greater negative impact on OHRQoL (AdjPR= 6.016; 95%CI = 3.12 11.56; p<0.001), while older parents reported better OHRQoL (AdjPR = 0.603; 95%CI = 0.428 - 0.850; p = 0.004). The presence of severe early childhood caries had a negative impact on OHRQoL of preschool children and their families.

Influência da técnica de fabricação e dos materiais sobre o ajuste da interface pilar/implante em infraestruturas implantossuportadas

The aim of this study was to compare the misfit vertical, horizontal and passivity of zirconia and cobalt-chromium frameworks fabricated for CAD / CAM technology and conventional method of casting. Sixteen frameworks in one-piece, were obtained from a metallic matrix containing three Brånemark compatible implants with regular platform (Titamax Cortical Ti, Neodent). Eight frameworks were fabricated by CAD / CAM system (NeoShape, Neodent): four in zirconia (ZirCAD) and four cobalt-chromium (CoCrcad). Eight other frameworks were obtained by conventional casting method: four cobalt-chromium with UCLA abutment premachined Co-Cr (CoCrUCci) and four cobalt-chromium with UCLA abutment castable (CoCrUCc). The fit vertical, horizontal and passivity by one-screw test were measured using scanning electron microscopy with magnification of 250x. Initially evaluated the passivity by one-screw test and subsequently to assess the vertical and horizontal misfit, tightened all the screws with a torque of 20 Ncm. Mean, standard deviation, minimum and maximum values were calculated for each group. Measurements of horizontal misfit were transformed into cumulative frequency for categorization of the variable and the group later comparison groups. To evaluate the existence of quantitative differences between the groups tested for vertical misfit and passivity, we used the Kruskal-Wallis test. The Mann-Whitney test was used to compare group to group statistical differences (p <0.05). Were observed the respective mean and standard deviation for vertical misfit and passivity in micrometers: ZirCAD (5.9 ± 3.6, 107.2 ± 36), CoCrcad (1.2 ± 2.2, 107.5 ± 26 ), CoCrUCci (11.8 ± 9.8, 124.7 ± 74), CoCrUCc (12.9 ± 11.0, 108.8 ± 85). There were statistical differences in measures of vertical misfit (p = 0.000). The Mann-Whitney test revealed statistical differences (p <0.05) between all groups except between CoCrUCci and CoCrUCc (p = 0.619). No statistical difference was observed for the passivity. In relation to the horizontal misfit groups ZirCAD and CoCrcad did not show best values in relation to CoCrUCci and CoCrUCc. Based on the results it can be concluded that frameworks fabricated by CAD / CAM technology had better values of vertical fit than those manufactured by the casting method, nevertheless, the passivity was not influenced by manufacturing technique and material used. The horizontal fit obtained by frameworks manufactured by CAD / CAM was not superior to those manufactured by casting. A lower variability in vertical adjustment and passivity was observed when frameworks were fabricated by CAD / CAM technology

Influência das condições de saúde bucal no desempenho das atividades diárias de adolescentes escolares

Instruments are used in odontology to measure the Quality of Life Related to Oral Health (OHRQoL) to scale how the oral condition interferes with functional areas, of the people s psychological and social life. This cross-sectional study, held in Natal/RN, with 215 students from the Federal Institute of Education, Science and Technology of Rio Grande do Norte (IFRN) has investigated the association between the performance of daily activities and oral health status of school adolescents from 15 to 19 years of age, through the normative index DMFT (permanent teeth decayed, missing and filled), CPI (Community Periodontal Index) and DAI (dental Aesthetic Index) and subjective questionnaire assessment of quality of life related oral health OIDP index (oral impacts on daily performance). It was also carried out the socioeconomic characteristics of students through IFRN own data. Concerning the analysis of data was performed a descriptive analysis of the variables by their absolute and relative frequencies and measures of central tendency. The chi-square test was used to assess the association between the dependent variable and the independent categorical variables and the Student t test for quantitative. It was also conducted a further multiple analysis out using Poisson regression with robust variance between the outcome "presence of impact" and the independent variables that showed p <0.20. It was used for all the statistical tests a significance level of 5%. Among the adolescents surveyed, 51.16% reported that at least one activity assessed by OIDP had hampered its implementation due to some dental problem. The difficulties were more pronounced in the activities of eating (31.6%), oral hygiene (25.6%) and smile (25.1%).The tooth position, followed by toothache, were the causes of the impacts reported by most teenagers. There was a significant association between the presence and impact of the presence of one or more decayed teeth (p = 0.012), the presence of gum bleeding (p = 0.012) and for orthodontic treatment (p = 0.003), independently of other variables. There was no significant association between oral health status and socioeconomic and demographic characteristics of the adolescents. The survey results showed that there is an association between oral health status of the population studied and reports of difficulties in carrying out daily activities evaluated. The worse the oral health status, the greater the impact of this condition on the adolescents quality of life

Influência do pré-aquecimento na adaptação marginal de dois materiais seladores de fóssulas e fissuras, analisada através de tomografia de coerência ótica

Among the non-invasive techniques employed in the prevention of caries highlights the sealing pits and fissures which is a conservative maneuver, in order to obliterate them to protect them from attack acid bacteria. Influenced by the studies of pre-heating composite resin, which has experienced great improvement in some of their physical properties, this study aimed to evaluate in vitro the superficial and internal marginal adaptation of different materials and sealants in pre-heating or not. A total of 40 extracted human third molars (n=10) that had their occlusal surfaces prepared to receive sealant. We tested two types of sealing materials: resin sealant (Fluoroshield) and low-viscosity resin (Permaflo), where 50% of previously received heated material and the other half received sealant material at room temperature. All samples were subjected to thermal cycling and pH, simulating a cariogenic oral environment, and later were analyzed appliance OCT (optical coherence tomography). The images obtained alterations were recorded and analyzed statistically. Change was considered as the emergence of bubbles, gaps and cracks in the sealant. Comparisons of the same material, assessing the fact that it is not sealed or preheated material, as well as comparisons between different materials subjected to the same temperature were carried out. The nonparametric Tukey test was used (p < 0,05). The results showed that there was statistically significant difference between both the materials analyzed, as between the situations in which the sealant material was submitted (preheated or not). On the issue of marginal adaptation and internal surface, seen through Optical coherence tomography, may suggest that there is a difference between the use of one type or another of the sealing material analyzed, with superiority attributed to resin Permaflo compared to sealant Fluroshield, telling is the same for the different techniques used

Passividade na interface prótese/pilar intermediário de infraestrutura implantossuportadas confeccionadas pela tecnologia CAD/CAM e método convencional

The objective of this research was to evaluate the passivity and strain induced in infrastructures screwed on abutments, made by CAD/CAM technology, and to compare these samples with parts manufactured by conventional casting. Using CAD/CAM technology, 4 samples were made from zirconia (Zircad) and 4 samples were manufactured from cobaltchrome (CoCrcad). The control groups were 4 specimens of cobalt-chrome, made by onepiece casting (CoCrci), for a total of 12 infrastructures. To evaluate the passivity, the infraestructures were installed on the abutments. One end was tightened and the vertical gap between the infrastructure and the prosthetic abutment was measured with scanning electron microscopy (250×). The mean strain in these infrastructures was analyzed via the photoelasticity test. A significant difference (p = 0.000) in passivity was observed between the control (CoCrci) and sample groups (CoCrcad and CoCrci). CoCrcad exhibited the best value of passivity (48.76 ± 13.45 μm) and CoCrci the worst (187.55 ± 103.63 μm), Zircad presented an intermediate value (103.81 ± 43.15 μm). When compared to the other groups, CoCrci showed the highest mean strain around the implants (17.19 ± 7.22 kPa). It was concluded that the zirconia infrastructure made by CAD / CAM showed a higher vertical marginal misfit than those made in cobalt-chromium alloy with the same methodology, however, the tension generated in the implants was similar. The CAD/CAM technology is more accurate for passivity and mean strain of infrastructure screwed on abutments than conventional manufacturing techniques

Adolescentes em conflito com a lei: a saga das punições na rota da exclusão social

This work deals with the problematic of the determinations that contribute to become the adolescents involved with law. Thus, in this research, the social exclusion is apprehended as one of the most important determining to understand this problematic, once we defend that it is part of the trajectory of this adolescent's life since its birth as a punishment that starts before they becoming envolved in act's that break the law. It is still questioned the discussion of the reduction of the penal age, viewed aa a proposal that will contribute to perpetuate the repression. The objectives of the research were: analyze the problematic of adolescents in conflict with law, where social exclusion is seen here as a main category. The research also aims to understand the situation towards social exclusion and that this public is undertaken in the state of Rio Grande do Norte, more specifically in Natal. This is dane through analysis of the profile of adolescents that are submitted to the treatment at Centro Integrate de Atendimento ao Adolescente Acusado de Ato Infracional - CIAD in 2005. This is dane on arder to identify of the State's and society's actions towards this issue, how it has prevailed in analyzing if there is punishing or social protection. The research also contributed with discussion towards the non penal reduction of for underage minors. The approach realized if of qualiquantitative nature. The research was realized with 190 male adolescent subjects, age ranging from 12 to 21 that were interns at CIAD in the year of 2005. The research shows that their fundamental rights (education, health, amongst others) are disrespected on a daily basis by the State. The State prioritizes economic issues, making social inequality more profound. The main argument is that this problematic has its main oring in the social exclusion and it is imposed to the adolescents as a punishment before thes have been involved with the law going on top of the social protection. When the adolescent goes from being the victim to executioner, the Statute of Children and Adolescents is questioned by many sectors that defend the reduction of penal minority as a solution to reduce the country's violence. Thus, it was aimed here to discuss arguments that point to non exclusion, discrimination and repression. It is proposed that the State should assume children and adolescents as a priority, implementing what the statute establishes as well as assures related to the fruition of denied rights as a way to prevent their future involvement with violence

Arcabouço geofísico, isostasia e causas do magmatismo cenozóico da província Borborema e de sua margem continental (Nordeste do Brasil)

The Borborema Province (BP) is a geologic domain located in Northeastern Brazil. The BP is limited at the south by the São Francisco craton, at the west by the Parnaíba basin, and both at the north and east by coastal sedimentary basins. Nonetheless the BP surface geology is well known, several key aspects of its evolution are still open, notably: i)its tectonic compartmentalization established after the Brasiliano orogenesis, ii) the architecture of its cretaceous continental margin, iii) the elastic properties of its lithosphere, and iv) the causes of magmatism and uplifting which occurred in the Cenozoic. In this thesis, a regional coverage of geophysical data (elevation, gravity, magnetic, geoid height, and surface wave global tomography) were integrated with surface geologic information aiming to attain a better understanding of the above questions. In the Riacho do Pontal belt and in the western sector of the Sergipano belt, the neoproterozoic suture of the collision of the Sul domain of the BP with the Sanfranciscana plate (SFP) is correlated with an expressive dipolar gravity anomaly. The positive lobule of this anomaly is due to the BP lower continental crust uplifting whilst the negative lobule is due to the supracrustal nappes overthrusting the SFP. In the eastern sector of the Sergipano belt, this dipolar gravity anomaly does not exist. However the suture still can be identified at the southern sector of the Marancó complex arc, alongside of the Porto da Folha shear zone, where the SFP N-S geophysical alignments are truncated. The boundary associated to the collision of the Ceará domain of the BP with the West African craton is also correlated with a dipolar gravity anomaly. The positive lobule of this anomaly coincides with the Sobral-Pedro II shear zone whilst the negative lobule is associated with the Santa Quitéria magmatic arc. Judging by their geophysical signatures, the major BP internal boundaries are: i)the western sector of the Pernambuco shear zone and the eastern continuation of this shear zone as the Congo shear zone, ii) the Patos shear zone, and iii) the Jaguaribe shear zone and its southwestern continuation as the Tatajuba shear zone. These boundaries divide the BP in five tectonic domains in the geophysical criteria: Sul, Transversal, Rio Grande do Norte, Ceará, and Médio Coreaú. The Sul domain is characterized by geophysical signatures associated with the BP and SFP collision. The fact that Congo shear zone is now proposed as part of the Transversal domain boundary implies an important change in the original definition of this domain. The Rio Grande do Norte domain presents a highly magnetized crust resulted from the superposition of precambrian and phanerozoic events. The Ceará domain is divided by the Senador Pompeu shear zone in two subdomains: the eastern one corresponds to the Orós-Jaguaribe belt and the western one to the Ceará-Central subdomain. The latter subdomain exhibits a positive ENE-W SW gravity anomaly which was associated to a crustal discontinuity. This discontinuity would have acted as a rampart against to the N-S Brasiliano orogenic nappes. The Médio Coreaú domain also presents a dipolar gravity anomaly. Its positive lobule is due to granulitic rocks whereas the negative one is caused by supracrustal rocks. The boundary between Médio Coreaú and Ceará domains can be traced below the Parnaíba basin sediments by its geophysical signature. The joint analysis of free air anomalies, free air admittances, and effective elastic thickness estimates (Te) revealed that the Brazilian East and Equatorial continental margins have quite different elastic properties. In the first one 10 km < Te < 20 km whereas in the second one Te ≤ 10 km. The weakness of the Equatorial margin lithosphere was caused by the cenozoic magmatism. The BP continental margin presents segmentations; some of them have inheritance from precambrian structures and domains. The segmentations conform markedly with some sedimentary basin features which are below described from south to north. The limit between Sergipe and Alagoas subbasins coincides with the suture between BP and SFP. Te estimates indicates concordantly that in Sergipe subbasin Te is around 20 km while Alagoas subbasin has Te around 10 km, thus revealing that the lithosphere in the Sergipe subbasin has a greater rigidity than the lithosphere in the Alagoas subbasin. Additionally inside the crust beneath Sergipe subbasin occurs a very dense body (underplating or crustal heritage?) which is not present in the crust beneath Alagoas subbasin. The continental margin of the Pernambuco basin (15 < Te < 25 km) presents a very distinct free air edge effect displaying two anomalies. This fact indicates the existence in the Pernambuco plateau of a relatively thick crust. In the Paraíba basin the free air edge effect is quite uniform, Te ≈ 15 km, and the lower crust is abnormally dense probably due to its alteration by a magmatic underplating in the Cenozoic. The Potiguar basin segmentation in three parts was corroborated by the Te estimates: in the Potiguar rift Te ≅ 5 km, in the Aracati platform Te ≅ 25 km, and in the Touros platform Te ≅ 10 km. The observed weakness of the lithosphere in the Potiguar rift segment is due to the high heat flux while the relatively high strength of the lithosphere in the Touros platform may be due to the existence of an archaean crust. The Ceará basin, in the region of Mundaú and Icaraí subbasins, presents a quite uniform free air edge effect and Te ranges from 10 to 15 km. The analysis of the Bouguer admittance revealed that isostasy in BP can be explained with an isostatic model where combined surface and buried loadings are present. The estimated ratio of the buried loading relative to the surface loading is equal to 15. In addition, the lower crust in BP is abnormally dense. These affirmations are particularly adequate to the northern portion of BP where adherence of the observed data to the isostatic model is quite good. Using the same above described isostatic model to calculate the coherence function, it was obtained that a single Te estimate for the entire BP must be lower than 60 km; in addition, the BP north portion has Te around 20 km. Using the conventional elastic flexural model to isostasy, an inversion of crust thickness was performed. It was identified two regions in BP where the crust is thickened: one below the Borborema plateau (associated to an uplifting in the Cenozoic) and the other one in the Ceará domain beneath the Santa Quitéria magmatic arc (a residue associated to the Brasiliano orogenesis). On the other hand, along the Cariri-Potiguar trend, the crust is thinned due to an aborted rifting in the Cretaceous. Based on the interpretation of free air anomalies, it was inferred the existence of a large magmatism in the oceanic crust surrounding the BP, in contrast with the incipient magmatism in the continent as shown by surface geology. In BP a quite important positive geoid anomaly exists. This anomaly is spatially correlated with the Borborema plateau and the Macaú-Queimadas volcanic lineament. The integrated interpretation of geoid height anomaly data, global shear velocity model, and geologic data allow to propose that and Edge Driven Convection (EDC) may have caused the Cenozoic magmatism. The EDC is an instability that presumably occurs at the boundary between thick stable lithosphere and oceanic thin lithosphere. In the BP lithosphere, the EDC mechanism would have dragged the cold lithospheric mantle into the hot asthenospheric mantle thus causing a positive density contrast that would have generated the main component of the geoid height anomaly. In addition, the compatibility of the gravity data with the isostatic model, where combined surface and buried loadings are present, together with the temporal correlation between the Cenozoic magmatism and the Borborema plateau uplifting allow to propose that this uplifting would have been caused by the buoyancy effect of a crustal root generated by a magmatic underplating in the Cenozoic

Conhecimento sobre ergonomia no âmbito acadêmico: um estudo com alunos e professores de odontologia

OBJETIVO: As doenças osteomusculares são as afecções ocupacionais mais prevalentes em cirurgiões-dentistas. Nosso propósito: 1) investigar os conhecimentos, aplicabilidades clínicas dos princípios ergonômicos em discentes e docentes em atividades clínicas de uma universidade pública 2) pesquisar a incidência de sintomatologias dolorosas no pescoço, ombros, parte superior e inferior das costas, cotovelos, quadris, coxas, joelhos, tornozelos e pés no universo de alunos em estágios clínicos. 3) incitar discussões de normas e diretrizes ergonômicas na universidade. MÉTODOS: Esse estudo investigou o universo de alunos matriculados em disciplinas clínicas (148) e respectivos professores (30) do curso de odontologia da Universidade Federal do Rio Grande do Norte, Natal-RN a respeito dos princípios ergonômicos utilizados na rotina clínica. Paralelamente foi pesquisada a incidência de sintomatologia dolorosa nos alunos por intermédio do questionário nórdico e a partir dos resultados foi mensurado o índice de severidade dos sintomas em alunos. The Nordic Musculoskeletal Questionnaire (NMQ) é um instrumento de diagnóstico, proposto para padronizar a mensuração de relatos de sintomas osteomusculares. A análise dos dados foi através do programa SPSS-Statistical Package for the Social Sciences, versão 17.0 realizada analítica e descritivamente, com determinação das médias (x), desvio-padrão para variáveis quantitativas, freqüências simples e relativas para as variáveis categóricas, além da estatística de associação entre grupos (teste t) e a análise de associação do quiquadrado com nível de significância 5% entre as variáveis (Person). As respostas das questões abertas foram codificadas e transformadas em freqüências, descritas posteriormente. RESULTADOS: A aplicabilidade de medidas ergonômicas nas clínicas universitárias não foi evidenciada pelo universo de discentes e docentes. Quanto ao relato de sintomas osteomusculares o sexo feminino foi o mais acometido qualquer que seja o nível acadêmico cursado. As regiões anatômicas de maior grau de severidade de relatos dos sintomas foram: pescoço, parte inferior das costas, punhos, mãos e ombros, com significância etatística p<0,001. CONCLUSÃO: Em função dos achados os autores apresentam um protocolo de intervenção clínica baseado nos determinantes ergonômicos da Associação internacional de ergonomia (EAI) como medida de prevenção da saúde ocupacional dos futuros cirurgiões-dentistas ainda em processo de formação nas clínicas odontológicas das universidades.

Corpos brincantes: a cultura corporal do pastoril potiguar

Pastorais, Bailes Pastoris, Festa da Lapinha, Terno de Reis, Pastor, Pastoril Religioso ou Profano... Pastoris do Norte e Nordeste brasileiro. M ário de Andrade designou-o de Pastoril, folguedo de origem ibérica, tendo sua raiz primeira nos villancico. Considerando que o Pastoril é um folguedo popular, porque nele seus participantes engajam sua vida pessoal, sua cultura e suas influências, revelando modos de ser e compreender, que são interiorizados pelos brincantes a partir da vivência de seu contexto social múltiplo e de diferentes sentidos, é que situamos esse folguedo no mundo vivido fenomenológico. A investigação é de natureza fenomenológica, elucidando os elementos citados como cenário do vivido e do sensível. O presente trabalho tem como objetivo refletir sobre a compreensão de corpo encontrado nos pastoris norteriograndenses

Avaliação da eficiência da técnica de obturação pela compressão hidrùlica vertical após instrumentação automatizada

The purpose of this study was to evaluate through radiographic and microscopic analysis the efficiency of the filling techniques by vertical hidraulic compression after the root canal mechanical instrumentation in vitro as well to evaluate the marginal apical leakage through macroscopic and microscopic analysis. Thirty human mandibular molars were used , they were divided on three groups, these were subdivided on six subgroups with five specimens each, come down to 106 root canals filled. Initially, the teeth were instrumented with Profile system series 29 and filled with two ways: single accessory cone or single cone associated with gutta-percha secundary cone, with Fill Canal sealer or Sealer 26. Completed the filling, the teeth were coated with araldit and finger -nail polish except for the apical 2 mm and dried for 3 hours, thep radiographs were taken of the teeth in orto and disto-radiai directions. Next, the coronal seal was carried out with composite resin photopolymerized and with their process of making impermeable. Teeth of positive controls were used without araldit and finger-nail polish whereas the negative controls were used with total coat of araldit and finger-nail polish. The specimens were placed in 2% Methylene Blue dye for 24 hours and thermocycled for 7 days. Afterwards, sections were made of each tooth at mesial and distal roat, after this the teeth were radiographed at buccolíngual direction for a macroscopic analysis and at buccolingual and mesiodistal directions for assessment of the marginal apical leakage. Cross sections were made 3 mm to 3mm since the tooth apice. The sections obtained for each group were observed with a stereomicroscope to evaluate the quality of the root canal filling and the marginal apical leakage. The results showed that: In the four techniques the marginal dye leakage was present in the apical third; in all groups the quality of the root canal filling in the radiography was better at mesial root canal and the single cone technique showed inefficient when only a single distal root canal was present. In the radiographic evaluation the best quality of the root canal filling was observed in the 1A group (single accessory cone + FiIl Canal), as in the mesial root as in the distal root wich Shcwed twe root canals: when the distaI root had only one canal. the best result was showed by 28 group (single accessory cone associated with secundary cone + Fill Canal) In the macroscopic analysis of longitudinal !eaKage (outside surface). less leakage was showed as In the mesial root as in the distal root in the negative control group (3) followed 2A group (single accessory cone + Sealer 26). When the microscopic analysis of tranversal leakage of both roots (inside surface) was carried out. the groups that showed less dye leakage were the negative control (38) followed the 28 group (single acessory cone associated with secundary cone + Sealer 26). The homogeneity o filling was best noted in the 1 A group (.single accessoty cone + Fill Canal). The groups that showed less dye penetration in the tranversal leakage (total area) were negative control (3B) and 2B